david@xxxxxxx put forth on 1/27/2011 2:11 PM: > how do I understand how to setup things on multi-disk systems? the documentation > I've found online is not that helpful, and in some ways contradictory. Visit http://xfs.org There you will find: Users guide: http://xfs.org/docs/xfsdocs-xml-dev/XFS_User_Guide//tmp/en-US/html/index.html File system structure: http://xfs.org/docs/xfsdocs-xml-dev/XFS_Filesystem_Structure//tmp/en-US/html/index.html Training labs: http://xfs.org/docs/xfsdocs-xml-dev/XFS_Labs/tmp/en-US/html/index.html > If there really are good rules for how to do this, it would be very helpful if > you could just give mkfs.xfs the information about your system (this partition > is on a 16 drive raid6 array) and have it do the right thing. If your disk array is built upon Linux mdraid, recent versions of mkfs.xfs will read the parameters and automatically make the filesystem accordingly, properly. mxfs.fxs will not do this for PCIe/x hardware RAID arrays or external FC/iSCSI based SAN arrays as there is no standard place to acquire the RAID configuration information for such systems. For these you will need to configure mkfs.xfs manually. At minimum you will want to specify stripe width (sw) which needs to match the hardware stripe width. For RAID0 sw=[#of_disks]. For RAID 10, sw=[#disks/2]. For RAID5 sw=[#disks-1]. For RAID6 sw=[#disks-2]. You'll want at minimum agcount=16 for striped hardware arrays. Depending on the number and spindle speed of the disks, the total size of the array, the characteristics of the RAID controller (big or small cache), you may want to increase agcount. Experimentation may be required to find the optimum parameters for a given hardware RAID array. Typically all other parameters may be left at defaults. Picking the perfect mkfs.xfs parameters for a hardware RAID array can be somewhat of a black art, mainly because no two vendor arrays act or perform identically. Systems of a caliber requiring XFS should be thoroughly tested before going into production. Testing _with your workload_ of multiple parameters should be performed to identify those yielding best performance. -- Stan _______________________________________________ xfs mailing list xfs@xxxxxxxxxxx http://oss.sgi.com/mailman/listinfo/xfs
