On Sun, 2010-09-26 at 08:13 +0200, Arkadiusz Miskiewicz wrote:
> On Sunday 26 of September 2010, Arkadiusz MiÅkiewicz wrote:
> > Add projid32bit handling to userspace. mkfs.xfs is able to enable this
> > feature for new filesystems. xfs_db knows what projid_lo/hi are.
>
> ... and xfs_admin if someone needs it anyway.
Do you intend for this to be included or not?
I also have a question, below.
>
> News:
> - use 0x80 instead of 0x20 for PROJID32BIT superblock bit (as 0x20
> and 0x40 are reserved)
>
> diff --git a/db/xfs_admin.sh b/db/xfs_admin.sh
> index a7a3fdb..ec8424d 100755
> --- a/db/xfs_admin.sh
> +++ b/db/xfs_admin.sh
> @@ -6,9 +6,43 @@
> status=0
> DB_OPTS=""
> REPAIR_OPTS=""
> -USAGE="Usage: xfs_admin [-efjluV] [-c 0|1] [-L label] [-U uuid] device"
> +USAGE="Usage: xfs_admin [-efjlpuV] [-c 0|1] [-L label] [-U uuid] device"
Here you are describing a "p" flag, but below you are
actually adding a "3" flag (and documented as such in
the man page). I prefer "p" (but maybe there's a reason
you used "3" below). Which is it?
> -while getopts "efjluc:L:U:V" c
> +set_features2_bit() {
> + device="$1"
> + bit="$2"
> +
> + if [ -z "$device" ]; then
> + echo "$0: device name is missing" >&2
> + return 1
> + fi
> +
> + if [ -z "$bit" ]; then
> + echo "$0: bits to set are missing" >&2
> + return 1
> + fi
> +
> + # read current bits
> + features2=$(xfs_db -p xfs_admin -x -r -c 'sb' -c 'print features2' "$device" | awk ' { print $3 } ')
> + if [ -z "$features2" ]; then
> + echo "$0: can't read features2 from superblock!" >&2
> + return 1
> + fi
> + bad_features2=$(xfs_db -p xfs_admin -x -r -c 'sb' -c 'print bad_features2' "$device" | awk ' { print $3 } ')
> + if [ -z "$bad_features2" ]; then
> + echo "$0: can't read bad_features2 from superblock!" >&2
> + return 1
> + fi
> +
> + # set new bits
> + features2=$((features2 | bit))
> + bad_features2=$((bad_features2 | bit))
> + xfs_db -p xfs_admin -x -c 'sb' -c "write features2 $features2" "$device" && \
> + xfs_db -p xfs_admin -x -c 'sb' -c "write bad_features2 $bad_features2" "$device"
> + return $?
> +}
> +
> +while getopts "efjlu3c:L:U:V"
> do
> case $c in
> c) REPAIR_OPTS=$REPAIR_OPTS" -c lazycount="$OPTARG;;
> @@ -17,6 +51,7 @@ do
> j) DB_OPTS=$DB_OPTS" -c 'version log2'";;
> l) DB_OPTS=$DB_OPTS" -r -c label";;
> L) DB_OPTS=$DB_OPTS" -c 'label "$OPTARG"'";;
> + 3) FEATURES_BIT="0x80";;
> u) DB_OPTS=$DB_OPTS" -r -c uuid";;
> U) DB_OPTS=$DB_OPTS" -c 'uuid "$OPTARG"'";;
> V) xfs_db -p xfs_admin -V
> @@ -31,7 +66,12 @@ done
> set -- extra $@
> shift $OPTIND
> case $# in
> - 1) if [ -n "$DB_OPTS" ]
> + 1) if [ -n "$FEATURES_BIT" ]
> + then
> + set_features2_bit "$1" "$FEATURES_BIT"
> + status=$?
> + fi
> + if [ -n "$DB_OPTS" ]
> then
> eval xfs_db -x -p xfs_admin $DB_OPTS $1
> status=$?
> diff --git a/man/man8/xfs_admin.8 b/man/man8/xfs_admin.8
> index 8e3155b..6b727f3 100644
> --- a/man/man8/xfs_admin.8
> +++ b/man/man8/xfs_admin.8
> @@ -4,7 +4,7 @@ xfs_admin \- change parameters of an XFS filesystem
> .SH SYNOPSIS
> .B xfs_admin
> [
> -.B \-eflu
> +.B \-eflu3
> ] [
> .BR "\-c 0" | 1
> ] [
> @@ -55,6 +55,9 @@ Print the current filesystem label.
> .B \-u
> Print the current filesystem UUID (Universally Unique IDentifier).
> .TP
> +.B \-3
> +Enable 32bit project identifier support (PROJID32BIT feature).
> +.TP
> .BR "\-c 0" | 1
> Enable (1) or disable (0) lazy-counters in the filesystem.
> This operation may take quite a bit of time on large filesystems as the
>
>
_______________________________________________
xfs mailing list
xfs@xxxxxxxxxxx
http://oss.sgi.com/mailman/listinfo/xfs
