Hi,
Iam using Xfree4.7.0 crosscompiled on a 7448 powerpc board with Marvell system controller
Marvel PCI 0 is connected to PMC site in which PMC silicon motion vga card is used
Marvel PCI 1
has TSI 148 chip.
The devices are not detected on running scanpci ... Help me to solve the issue
----------------------------------results----------------------------------------------------------------------------------------------------------
on running ./scanpci it displays only
pci bus 0x0000 cardnum 0x01 function 0x00: vendor 0x10e3 device 0x0148
Tundra Semiconductor Corp. Device unknown
on running ./XFree86 -configure
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:01:0: chip 10e3,0148 card 10e3,0000 rev 01 class 06,80,00 hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (-1,0,0), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
(II) Bus 0 non-prefetchable memory range:
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
List of video drivers:
sm731
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x00000000 - 0x00000000 (0x1) MX[B]
[2] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[3] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x00000000 - 0x00000000 (0x1) MX[B]
[2] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[3] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
(II) All system resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x00000000 - 0x00000000 (0x1) MX[B]
[2] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[3] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
No devices to configure. Configuration failed.
