Good evening,
here you can find my XFree86.0.log and XF86Config-4 file, at the end my
problem.
LOG FILE: XFree86.0.log
--------------------------------------------------------------------------------------
XFree86 Version 4.3.0
Release Date: 27 February 2003
X Protocol Version 11, Revision 0, Release 6.6
Build Operating System: Linux 2.4.21-0.13mdksmp i686 [ELF]
Build Date: 12 March 2003
Before reporting problems, check http://www.XFree86.Org/
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/XFree86.0.log", Time: Thu Feb 22 10:06:15 2007
(==) Using config file: "/etc/X11/XF86Config-4"
(==) ServerLayout "layout1"
(**) |-->Screen "screen1" (0)
(**) | |-->Monitor "monitor1"
(**) | |-->Device "device1"
(**) |-->Input Device "Keyboard1"
(WW) Option "XkbCompat" requires an string value
(**) Option "XkbModel" "pc105"
(**) XKB: model: "pc105"
(**) Option "XkbLayout" "gb"
(**) XKB: layout: "gb"
(WW) Option "XkbOptions" requires an string value
(==) Keyboard: CustomKeycode disabled
(**) |-->Input Device "Mouse1"
(**) FontPath set to "unix/:-1"
(==) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(==) ModulePath set to "/usr/X11R6/lib/modules"
(**) Option "AllowMouseOpenFail"
Using vt 7
(--) using VT number 7
(II) Open APM successful
(II) Module ABI versions:
XFree86 ANSI C Emulation: 0.2
XFree86 Video Driver: 0.6
XFree86 XInput driver : 0.4
XFree86 Server Extension : 0.2
XFree86 Font Renderer : 0.4
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.6
(II) PCI: Probing config type using method 1
(II) PCI: Config type is 1
(II) PCI: stages = 0x03, oldVal1 = 0x00000000, mode1Res1 = 0x80000000
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 1106,0691 card 1043,8020 rev c4 class 06,00,00 hdr
00
(II) PCI: 00:01:0: chip 1106,8598 card 0000,0000 rev 00 class 06,04,00 hdr
01
(II) PCI: 00:04:0: chip 1106,0686 card 1043,8020 rev 22 class 06,01,00 hdr
80
(II) PCI: 00:04:1: chip 1106,0571 card 0000,0000 rev 10 class 01,01,8a hdr
00
(II) PCI: 00:04:2: chip 1106,3038 card 0925,1234 rev 10 class 0c,03,00 hdr
00
(II) PCI: 00:04:3: chip 1106,3038 card 0925,1234 rev 10 class 0c,03,00 hdr
00
(II) PCI: 00:04:4: chip 1106,3057 card 0000,0000 rev 30 class 06,00,00 hdr
00
(II) PCI: 00:04:5: chip 1106,3058 card 1043,1013 rev 20 class 04,01,00 hdr
00
(II) PCI: 01:00:0: chip 1002,474d card 1002,0008 rev 65 class 03,00,00 hdr
00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,1), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 1 I/O range:
[0] -1 0 0x0000d000 - 0x0000dfff (0x1000) IX[B]
(II) Bus 1 non-prefetchable memory range:
[0] -1 0 0xe1800000 - 0xe3efffff (0x2700000) MX[B]
(II) Bus 1 prefetchable memory range:
[0] -1 0 0xe3f00000 - 0xe3ffffff (0x100000) MX[B]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:4:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(II) Host-to-PCI bridge:
(II) Bus -1: bridge is at (0:4:4), (-1,-1,1), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus -1 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus -1 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus -1 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(--) PCI:*(1:0:0) ATI Technologies Inc Rage XL AGP 2X rev 101, Mem @
0xe2000000/24, 0xe1800000/12, I/O @ 0xd800/8, BIOS @ 0xe3fe0000/17
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) PCI Memory resource overlap reduced 0xe4000000 from 0xe7ffffff to
0xe3ffffff
(II) Active PCI resource ranges:
[0] -1 0 0xe4000000 - 0xe3ffffff (0x0) MX[B]O
[1] -1 0 0xe3fe0000 - 0xe3ffffff (0x20000) MX[B](B)
[2] -1 0 0xe1800000 - 0xe1800fff (0x1000) MX[B](B)
[3] -1 0 0xe2000000 - 0xe2ffffff (0x1000000) MX[B](B)
[4] -1 0 0x0000a000 - 0x0000a003 (0x4) IX[B]
[5] -1 0 0x0000a400 - 0x0000a403 (0x4) IX[B]
[6] -1 0 0x0000a800 - 0x0000a8ff (0x100) IX[B]
[7] -1 0 0x0000b000 - 0x0000b01f (0x20) IX[B]
[8] -1 0 0x0000b400 - 0x0000b41f (0x20) IX[B]
[9] -1 0 0x0000b800 - 0x0000b80f (0x10) IX[B]
[10] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[B](B)
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xe4000000 - 0xe3ffffff (0x0) MX[B]O
[1] -1 0 0xe3fe0000 - 0xe3ffffff (0x20000) MX[B](B)
[2] -1 0 0xe1800000 - 0xe1800fff (0x1000) MX[B](B)
[3] -1 0 0xe2000000 - 0xe2ffffff (0x1000000) MX[B](B)
[4] -1 0 0x0000a000 - 0x0000a003 (0x4) IX[B]
[5] -1 0 0x0000a400 - 0x0000a403 (0x4) IX[B]
[6] -1 0 0x0000a800 - 0x0000a8ff (0x100) IX[B]
[7] -1 0 0x0000b000 - 0x0000b01f (0x20) IX[B]
[8] -1 0 0x0000b400 - 0x0000b41f (0x20) IX[B]
[9] -1 0 0x0000b800 - 0x0000b80f (0x10) IX[B]
[10] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[B](B)
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xe4000000 - 0xe3ffffff (0x0) MX[B]O
[6] -1 0 0xe3fe0000 - 0xe3ffffff (0x20000) MX[B](B)
[7] -1 0 0xe1800000 - 0xe1800fff (0x1000) MX[B](B)
[8] -1 0 0xe2000000 - 0xe2ffffff (0x1000000) MX[B](B)
[9] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[10] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[11] -1 0 0x0000a000 - 0x0000a003 (0x4) IX[B]
[12] -1 0 0x0000a400 - 0x0000a403 (0x4) IX[B]
[13] -1 0 0x0000a800 - 0x0000a8ff (0x100) IX[B]
[14] -1 0 0x0000b000 - 0x0000b01f (0x20) IX[B]
[15] -1 0 0x0000b400 - 0x0000b41f (0x20) IX[B]
[16] -1 0 0x0000b800 - 0x0000b80f (0x10) IX[B]
[17] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[B](B)
(II) LoadModule: "dbe"
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "v4l"
(II) Loading /usr/X11R6/lib/modules/drivers/linux/v4l_drv.o
(II) Module v4l: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 0.0.1
ABI class: XFree86 Video Driver, version 0.6
(II) LoadModule: "extmod"
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension FontCache
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "type1"
(II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
(II) Module type1: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.2
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font Type1
(II) Loading font CID
(II) LoadModule: "freetype"
(II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.a
(II) Module freetype: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 2.0.2
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font FreeType
(II) LoadModule: "glx"
(II) Loading /usr/X11R6/lib/modules/extensions/libglx.a
(II) Module glx: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.2
(II) Loading sub module "GLcore"
(II) LoadModule: "GLcore"
(II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a
(II) Module GLcore: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension GLX
(II) LoadModule: "ati"
(II) Loading /usr/X11R6/lib/modules/drivers/ati_drv.o
(II) Module ati: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 6.4.18
Module class: XFree86 Video Driver
ABI class: XFree86 Video Driver, version 0.6
(II) LoadModule: "mouse"
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
Module class: XFree86 XInput Driver
ABI class: XFree86 XInput driver, version 0.4
(II) v4l driver for Video4Linux
(II) ATI: ATI driver (version 6.4.18) for chipsets: ati, ativga
(II) R128: Driver for ATI Rage 128 chipsets:
ATI Rage 128 Mobility M3 LE (PCI), ATI Rage 128 Mobility M3 LF (AGP),
ATI Rage 128 Mobility M4 MF (AGP), ATI Rage 128 Mobility M4 ML (AGP),
ATI Rage 128 Pro GL PA (PCI/AGP), ATI Rage 128 Pro GL PB (PCI/AGP),
ATI Rage 128 Pro GL PC (PCI/AGP), ATI Rage 128 Pro GL PD (PCI),
ATI Rage 128 Pro GL PE (PCI/AGP), ATI Rage 128 Pro GL PF (AGP),
ATI Rage 128 Pro VR PG (PCI/AGP), ATI Rage 128 Pro VR PH (PCI/AGP),
ATI Rage 128 Pro VR PI (PCI/AGP), ATI Rage 128 Pro VR PJ (PCI/AGP),
ATI Rage 128 Pro VR PK (PCI/AGP), ATI Rage 128 Pro VR PL (PCI/AGP),
ATI Rage 128 Pro VR PM (PCI/AGP), ATI Rage 128 Pro VR PN (PCI/AGP),
ATI Rage 128 Pro VR PO (PCI/AGP), ATI Rage 128 Pro VR PP (PCI),
ATI Rage 128 Pro VR PQ (PCI/AGP), ATI Rage 128 Pro VR PR (PCI),
ATI Rage 128 Pro VR PS (PCI/AGP), ATI Rage 128 Pro VR PT (PCI/AGP),
ATI Rage 128 Pro VR PU (PCI/AGP), ATI Rage 128 Pro VR PV (PCI/AGP),
ATI Rage 128 Pro VR PW (PCI/AGP), ATI Rage 128 Pro VR PX (PCI/AGP),
ATI Rage 128 GL RE (PCI), ATI Rage 128 GL RF (AGP),
ATI Rage 128 RG (AGP), ATI Rage 128 VR RK (PCI),
ATI Rage 128 VR RL (AGP), ATI Rage 128 4X SE (PCI/AGP),
ATI Rage 128 4X SF (PCI/AGP), ATI Rage 128 4X SG (PCI/AGP),
ATI Rage 128 4X SH (PCI/AGP), ATI Rage 128 4X SK (PCI/AGP),
ATI Rage 128 4X SL (PCI/AGP), ATI Rage 128 4X SM (AGP),
ATI Rage 128 4X SN (PCI/AGP), ATI Rage 128 Pro ULTRA TF (AGP),
ATI Rage 128 Pro ULTRA TL (AGP), ATI Rage 128 Pro ULTRA TR (AGP),
ATI Rage 128 Pro ULTRA TS (AGP?), ATI Rage 128 Pro ULTRA TT (AGP?),
ATI Rage 128 Pro ULTRA TU (AGP?)
(II) RADEON: Driver for ATI Radeon chipsets: ATI Radeon QD (AGP),
ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
ATI Radeon VE/7000 QY (AGP), ATI Radeon VE/7000 QZ (AGP),
ATI Radeon Mobility M7 LW (AGP),
ATI Mobility FireGL 7800 M7 LX (AGP),
ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
ATI Radeon IGP320 (A3) 4136, ATI Radeon IGP320M (U1) 4336,
ATI Radeon IGP330/340/350 (A4) 4137,
ATI Radeon IGP330M/340M/350M (U2) 4337,
ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QI (AGP),
ATI Radeon 8500 QJ (AGP), ATI Radeon 8500 QK (AGP),
ATI Radeon 8500 QL (AGP), ATI Radeon 9100 QM (AGP),
ATI Radeon 8500 QN (AGP), ATI Radeon 8500 QO (AGP),
ATI Radeon 8500 Qh (AGP), ATI Radeon 8500 Qi (AGP),
ATI Radeon 8500 Qj (AGP), ATI Radeon 8500 Qk (AGP),
ATI Radeon 8500 Ql (AGP), ATI Radeon 8500 BB (AGP),
ATI Radeon 7500 QW (AGP), ATI Radeon 7500 QX (AGP),
ATI Radeon 9000 Id (AGP), ATI Radeon 9000 Ie (AGP),
ATI Radeon 9000 If (AGP), ATI Radeon 9000 Ig (AGP),
ATI Radeon Mobility M9 Ld (AGP), ATI Radeon Mobility M9 Le (AGP),
ATI Radeon Mobility M9 Lf (AGP), ATI Radeon Mobility M9 Lg (AGP),
ATI Radeon 9200 5960 (AGP), ATI Radeon 9200 5961 (AGP),
ATI Radeon 9200 5962 (AGP), ATI Radeon 9200 5963 (AGP),
ATI Radeon M9+ 5968 (AGP), ATI Radeon M9+ 5969 (AGP),
ATI Radeon M9+ 596A (AGP), ATI Radeon M9+ 596B (AGP),
ATI Radeon 9500 AD (AGP), ATI Radeon 9500 AE (AGP),
ATI Radeon 9500 AF (AGP), ATI FireGL Z1/X1 AG (AGP),
ATI Radeon 9700 Pro ND (AGP), ATI Radeon 9700/9500Pro NE (AGP),
ATI Radeon 9700 NF (AGP), ATI FireGL X1 NG (AGP)
(II) Primary Device is: PCI 01:00:0
(II) ATI: Candidate "Device" section "device1".
(II) ATI: Shared PCI/AGP Mach64 in slot 1:0:0 detected.
(II) ATI: Shared PCI/AGP Mach64 in slot 1:0:0 assigned to active "Device"
section "device1".
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xe4000000 - 0xe3ffffff (0x0) MX[B]O
[6] -1 0 0xe3fe0000 - 0xe3ffffff (0x20000) MX[B](B)
[7] -1 0 0xe1800000 - 0xe1800fff (0x1000) MX[B](B)
[8] -1 0 0xe2000000 - 0xe2ffffff (0x1000000) MX[B](B)
[9] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[10] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[11] -1 0 0x0000a000 - 0x0000a003 (0x4) IX[B]
[12] -1 0 0x0000a400 - 0x0000a403 (0x4) IX[B]
[13] -1 0 0x0000a800 - 0x0000a8ff (0x100) IX[B]
[14] -1 0 0x0000b000 - 0x0000b01f (0x20) IX[B]
[15] -1 0 0x0000b400 - 0x0000b41f (0x20) IX[B]
[16] -1 0 0x0000b800 - 0x0000b80f (0x10) IX[B]
[17] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[B](B)
(II) Loading sub module "atimisc"
(II) LoadModule: "atimisc"
(II) Loading /usr/X11R6/lib/modules/drivers/atimisc_drv.o
(II) Module atimisc: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 6.4.18
Module class: XFree86 Video Driver
ABI class: XFree86 Video Driver, version 0.6
(II) resource ranges after probing:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xe4000000 - 0xe3ffffff (0x0) MX[B]O
[6] -1 0 0xe3fe0000 - 0xe3ffffff (0x20000) MX[B](B)
[7] -1 0 0xe1800000 - 0xe1800fff (0x1000) MX[B](B)
[8] -1 0 0xe2000000 - 0xe2ffffff (0x1000000) MX[B](B)
[9] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[10] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[11] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[12] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[13] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[14] -1 0 0x0000a000 - 0x0000a003 (0x4) IX[B]
[15] -1 0 0x0000a400 - 0x0000a403 (0x4) IX[B]
[16] -1 0 0x0000a800 - 0x0000a8ff (0x100) IX[B]
[17] -1 0 0x0000b000 - 0x0000b01f (0x20) IX[B]
[18] -1 0 0x0000b400 - 0x0000b41f (0x20) IX[B]
[19] -1 0 0x0000b800 - 0x0000b80f (0x10) IX[B]
[20] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[B](B)
[21] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[22] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(==) ATI(0): Chipset: "ati".
(**) ATI(0): Depth 24, (--) framebuffer bpp 32
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/X11R6/lib/modules/linux/libint10.a
(II) Module int10: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.6
(II) ATI(0): Primary V_BIOS segment is: 0xc000
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Loading /usr/X11R6/lib/modules/libddc.a
(II) Module ddc: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.6
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/X11R6/lib/modules/libvbe.a
(II) Module vbe: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.1.0
ABI class: XFree86 Video Driver, version 0.6
(II) ATI(0): VESA BIOS detected
(II) ATI(0): VESA VBE Version 2.0
(II) ATI(0): VESA VBE Total Mem: 8128 kB
(II) ATI(0): VESA VBE OEM: ATI MACH64
(II) ATI(0): VESA VBE OEM Software Rev: 1.0
(II) ATI(0): VESA VBE OEM Vendor: ATI Technologies Inc.
(II) ATI(0): VESA VBE OEM Product: MACH64GM
(II) ATI(0): VESA VBE OEM Product Rev: 01.00
(II) ATI(0): VESA VBE DDC supported
(II) ATI(0): VESA VBE DDC Level none
(II) ATI(0): VESA VBE DDC transfer in appr. 2 sec.
(II) ATI(0): VESA VBE DDC read failed
(--) ATI(0): ATI 3D Rage XL or XC graphics controller detected.
(--) ATI(0): Chip type 474D "GM", version 5, foundry TSMC, class 0, revision
0x01.
(--) ATI(0): AGP bus interface detected; block I/O base is 0xD800.
(--) ATI(0): ATI Mach64 adapter detected.
(!!) ATI(0): For information on using the multimedia capabilities
of this adapter, please see http://gatos.sf.net.
(--) ATI(0): Internal RAMDAC (subtype 1) detected.
(==) ATI(0): RGB weight 888
(==) ATI(0): Default visual is TrueColor
(==) ATI(0): Using gamma correction (1.0, 1.0, 1.0)
(II) ATI(0): Using Mach64 accelerator CRTC.
(II) ATI(0): Storing hardware cursor image at 0xE27FFC00.
(II) ATI(0): Using 8 MB linear aperture at 0xE2000000.
(!!) ATI(0): Virtual resolutions will be limited to 8191 kB
due to linear aperture size and/or placement of hardware cursor image area.
(II) ATI(0): Using Block 0 MMIO aperture at 0xE1800400.
(II) ATI(0): Using Block 1 MMIO aperture at 0xE1800000.
(==) ATI(0): Write-combining range (0xe2000000,0x800000)
(II) ATI(0): MMIO write caching enabled.
(--) ATI(0): 8192 kB of SDRAM (1:1) detected (using 8191 kB).
(WW) ATI(0): Cannot shadow an accelerated frame buffer.
(II) ATI(0): Engine XCLK 99.765 MHz; Refresh rate code 7.
(--) ATI(0): Internal programmable clock generator detected.
(--) ATI(0): Reference clock 157.5/11 (14.318) MHz.
(II) ATI(0): monitor1: Using hsync range of 30.00-82.00 kHz
(II) ATI(0): monitor1: Using vrefresh range of 43.00-72.00 Hz
(II) ATI(0): Maximum clock: 199.00 MHz
(II) ATI(0): Not using default mode "640x350" (vrefresh out of range)
(II) ATI(0): Not using default mode "320x175" (vrefresh out of range)
(II) ATI(0): Not using default mode "640x400" (vrefresh out of range)
(II) ATI(0): Not using default mode "320x200" (vrefresh out of range)
(II) ATI(0): Not using default mode "720x400" (vrefresh out of range)
(II) ATI(0): Not using default mode "360x200" (vrefresh out of range)
(II) ATI(0): Not using default mode "640x480" (vrefresh out of range)
(II) ATI(0): Not using default mode "320x240" (vrefresh out of range)
(II) ATI(0): Not using default mode "640x480" (vrefresh out of range)
(II) ATI(0): Not using default mode "320x240" (vrefresh out of range)
(II) ATI(0): Not using default mode "640x480" (vrefresh out of range)
(II) ATI(0): Not using default mode "320x240" (vrefresh out of range)
(II) ATI(0): Not using default mode "800x600" (vrefresh out of range)
(II) ATI(0): Not using default mode "400x300" (vrefresh out of range)
(II) ATI(0): Not using default mode "800x600" (vrefresh out of range)
(II) ATI(0): Not using default mode "400x300" (vrefresh out of range)
(II) ATI(0): Not using default mode "1024x768" (vrefresh out of range)
(II) ATI(0): Not using default mode "512x384" (vrefresh out of range)
(II) ATI(0): Not using default mode "1024x768" (vrefresh out of range)
(II) ATI(0): Not using default mode "512x384" (vrefresh out of range)
(II) ATI(0): Not using default mode "1024x768" (vrefresh out of range)
(II) ATI(0): Not using default mode "512x384" (vrefresh out of range)
(II) ATI(0): Not using default mode "1152x864" (vrefresh out of range)
(II) ATI(0): Not using default mode "576x432" (vrefresh out of range)
(II) ATI(0): Not using default mode "1280x960" (hsync out of range)
(II) ATI(0): Not using default mode "640x480" (hsync out of range)
(II) ATI(0): Not using default mode "1280x1024" (vrefresh out of range)
(II) ATI(0): Not using default mode "640x512" (vrefresh out of range)
(II) ATI(0): Not using default mode "1280x1024" (hsync out of range)
(II) ATI(0): Not using default mode "640x512" (hsync out of range)
(II) ATI(0): Not using default mode "1600x1200" (hsync out of range)
(II) ATI(0): Not using default mode "800x600" (hsync out of range)
(II) ATI(0): Not using default mode "1600x1200" (bad mode
clock/interlace/doublescan)
(II) ATI(0): Not using default mode "800x600" (hsync out of range)
(II) ATI(0): Not using default mode "1600x1200" (bad mode
clock/interlace/doublescan)
(II) ATI(0): Not using default mode "800x600" (hsync out of range)
(II) ATI(0): Not using default mode "1792x1344" (insufficient memory for
mode)
(II) ATI(0): Not using default mode "896x672" (hsync out of range)
(II) ATI(0): Not using default mode "1792x1344" (insufficient memory for
mode)
(II) ATI(0): Not using default mode "896x672" (hsync out of range)
(II) ATI(0): Not using default mode "1856x1392" (insufficient memory for
mode)
(II) ATI(0): Not using default mode "928x696" (hsync out of range)
(II) ATI(0): Not using default mode "1856x1392" (insufficient memory for
mode)
(II) ATI(0): Not using default mode "928x696" (hsync out of range)
(II) ATI(0): Not using default mode "1920x1440" (insufficient memory for
mode)
(II) ATI(0): Not using default mode "960x720" (hsync out of range)
(II) ATI(0): Not using default mode "1920x1440" (insufficient memory for
mode)
(II) ATI(0): Not using default mode "960x720" (hsync out of range)
(II) ATI(0): Not using default mode "832x624" (vrefresh out of range)
(II) ATI(0): Not using default mode "416x312" (vrefresh out of range)
(II) ATI(0): Not using default mode "1400x1050" (vrefresh out of range)
(II) ATI(0): Not using default mode "700x525" (vrefresh out of range)
(II) ATI(0): Not using default mode "1920x1440" (insufficient memory for
mode)
(II) ATI(0): Not using default mode "960x720" (hsync out of range)
(II) ATI(0): Not using default mode "2048x1536" (insufficient memory for
mode)
(II) ATI(0): Not using default mode "1024x768" (hsync out of range)
(II) ATI(0): Not using default mode "2048x1536" (insufficient memory for
mode)
(II) ATI(0): Not using default mode "1024x768" (hsync out of range)
(II) ATI(0): Not using default mode "2048x1536" (insufficient memory for
mode)
(II) ATI(0): Not using default mode "1024x768" (hsync out of range)
(II) ATI(0): Not using default mode "1600x1200" (width too large for virtual
size)
(II) ATI(0): Not using default mode "1600x1200" (width too large for virtual
size)
(II) ATI(0): Not using default mode "1400x1050" (width too large for virtual
size)
(II) ATI(0): Not using default mode "1280x1024" (width too large for virtual
size)
(II) ATI(0): Not using default mode "1280x960" (width too large for virtual
size)
(II) ATI(0): Not using default mode "1152x768" (width too large for virtual
size)
(II) ATI(0): Not using default mode "1024x768" (width too large for virtual
size)
(II) ATI(0): Not using default mode "1024x768" (width too large for virtual
size)
(II) ATI(0): Not using default mode "800x600" (width too large for virtual
size)
(II) ATI(0): Not using default mode "800x600" (width too large for virtual
size)
(II) ATI(0): Not using default mode "800x600" (width too large for virtual
size)
(II) ATI(0): Not using default mode "800x600" (width too large for virtual
size)
(II) ATI(0): Not using default mode "800x600" (width too large for virtual
size)
(II) ATI(0): Not using default mode "700x525" (width too large for virtual
size)
(II) ATI(0): Not using default mode "640x512" (height too large for virtual
size)
(--) ATI(0): Virtual size is 640x480 (pitch 640)
(**) ATI(0): *Default mode "640x480": 25.2 MHz, 31.5 kHz, 60.0 Hz
(II) ATI(0): Modeline "640x480" 25.20 640 656 752 800 480 490 492 525
-hsync -vsync
(**) ATI(0): Default mode "640x480": 54.0 MHz, 60.0 kHz, 60.0 Hz (D)
(II) ATI(0): Modeline "640x480" 54.00 640 688 744 900 480 480 482 500
doublescan +hsync +vsync
(**) ATI(0): Default mode "576x384": 32.5 MHz, 44.2 kHz, 54.8 Hz (D)
(II) ATI(0): Modeline "576x384" 32.50 576 589 657 736 384 385 388 403
doublescan +hsync +vsync
(**) ATI(0): Default mode "512x384": 37.5 MHz, 56.5 kHz, 70.1 Hz (D)
(II) ATI(0): Modeline "512x384" 37.50 512 524 592 664 384 385 388 403
doublescan -hsync -vsync
(**) ATI(0): Default mode "512x384": 32.5 MHz, 48.4 kHz, 60.0 Hz (D)
(II) ATI(0): Modeline "512x384" 32.50 512 524 592 672 384 385 388 403
doublescan -hsync -vsync
(**) ATI(0): Default mode "400x300": 25.0 MHz, 48.1 kHz, 72.2 Hz (D)
(II) ATI(0): Modeline "400x300" 25.00 400 428 488 520 300 318 321 333
doublescan +hsync +vsync
(**) ATI(0): Default mode "400x300": 20.0 MHz, 37.9 kHz, 60.3 Hz (D)
(II) ATI(0): Modeline "400x300" 20.00 400 420 484 528 300 300 302 314
doublescan +hsync +vsync
(**) ATI(0): Default mode "400x300": 18.0 MHz, 35.2 kHz, 56.3 Hz (D)
(II) ATI(0): Modeline "400x300" 18.00 400 412 448 512 300 300 301 312
doublescan +hsync +vsync
(**) ATI(0): Default mode "320x240": 12.6 MHz, 31.5 kHz, 60.1 Hz (D)
(II) ATI(0): Modeline "320x240" 12.60 320 328 376 400 240 245 246 262
doublescan -hsync -vsync
(==) ATI(0): DPI set to (75, 75)
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/X11R6/lib/modules/libxaa.a
(II) Module xaa: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.1.0
ABI class: XFree86 Video Driver, version 0.6
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/X11R6/lib/modules/libramdac.a
(II) Module ramdac: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.6
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/X11R6/lib/modules/libfb.a
(II) Module fb: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
ABI class: XFree86 ANSI C Emulation, version 0.2
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] 0 0 0xe1800000 - 0xe1800fff (0x1000) MS[B]
[1] 0 0 0xe2000000 - 0xe2ffffff (0x1000000) MS[B]
[2] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[3] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[4] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[5] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[6] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[7] -1 0 0xe4000000 - 0xe3ffffff (0x0) MX[B]O
[8] -1 0 0xe3fe0000 - 0xe3ffffff (0x20000) MX[B](B)
[9] -1 0 0xe1800000 - 0xe1800fff (0x1000) MX[B](B)
[10] -1 0 0xe2000000 - 0xe2ffffff (0x1000000) MX[B](B)
[11] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprU)
[12] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprU)
[13] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprU)
[14] 0 0 0x0000d800 - 0x0000d8ff (0x100) IS[B]
[15] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[16] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[17] -1 0 0x0000a000 - 0x0000a003 (0x4) IX[B]
[18] -1 0 0x0000a400 - 0x0000a403 (0x4) IX[B]
[19] -1 0 0x0000a800 - 0x0000a8ff (0x100) IX[B]
[20] -1 0 0x0000b000 - 0x0000b01f (0x20) IX[B]
[21] -1 0 0x0000b400 - 0x0000b41f (0x20) IX[B]
[22] -1 0 0x0000b800 - 0x0000b80f (0x10) IX[B]
[23] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[B](B)
[24] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
[25] 0 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU)
(==) ATI(0): Write-combining range (0xe2000000,0x800000)
(II) ATI(0): Largest offscreen areas (with overlaps):
(II) ATI(0): 640 x 2796 rectangle at 0,480
(II) ATI(0): 256 x 2797 rectangle at 0,480
(II) ATI(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
Indirect CPU to Screen color expansion
Solid Lines
Offscreen Pixmaps
Setting up tile and stipple cache:
32 128x128 slots
18 256x256 slots
(==) ATI(0): Backing store disabled
(==) ATI(0): Silken mouse enabled
(==) RandR enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension LBX
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Keyboard "Keyboard1" handled by legacy driver
(**) Option "Protocol" "IMPS/2"
(**) Mouse1: Protocol: "IMPS/2"
(**) Option "CorePointer"
(**) Mouse1: Core Pointer
(**) Option "Device" "/dev/psaux"
(**) Mouse1: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5"
(**) Mouse1: ZAxisMapping: buttons 4 and 5
(**) Mouse1: Buttons: 5
(II) XINPUT: Adding extended input device "Mouse1" (type: MOUSE)
(II) Mouse1: ps2EnableDataReporting: succeeded
CONFIG FILE: XF86Config-4
# File generated by XFdrake.
# **********************************************************************
# Refer to the XF86Config man page for details about the format of
# this file.
# **********************************************************************
Section "Files"
# Multiple FontPath entries are allowed (they are concatenated together)
# By default, Mandrake 6.0 and later now use a font server independent
of
# the X server to render fonts.
FontPath "unix/:-1"
EndSection
Section "ServerFlags"
#DontZap # disable <Crtl><Alt><BS> (server abort)
#DontZoom # disable <Crtl><Alt><KP_+>/<KP_-> (resolution switching)
AllowMouseOpenFail # allows the server to start up even if the mouse
doesn't work
EndSection
Section "Module"
Load "dbe" # Double-Buffering Extension
Load "v4l" # Video for Linux
Load "extmod"
Load "type1"
Load "freetype"
Load "glx" # 3D layer
EndSection
Section "InputDevice"
Identifier "Keyboard1"
Driver "Keyboard"
Option "XkbModel" "pc105"
Option "XkbLayout" "gb"
Option "XkbCompat" ""
Option "XkbOptions" ""
EndSection
Section "InputDevice"
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "IMPS/2"
Option "Device" "/dev/psaux"
Option "ZAxisMapping" "4 5"
EndSection
Section "Monitor"
Identifier "monitor1"
VendorName "IBM"
ModelName "IBM 2215"
HorizSync 30-82
VertRefresh 43-72
#Sony Vaio
#1024x480 @ 85,6 Hz 48 kHz hsync
#ModeLine "1024x480" 65.00 1024 1032 1176 1344 480 488 494 563 -hsync
-vsync
# TV fullscreen mode or DVD fullscreen output.
# 768x576 @ 79 Hz, 50 kHz hsync
#ModeLine "768x576" 50.00 768 832 846 1000 576 590 595 630
# 768x576 @ 100 Hz, 61.6 kHz hsync
#ModeLine "768x576" 63.07 768 800 960 1024 576 578 590 616
EndSection
Section "Device"
Identifier "device1"
VendorName "ATI"
BoardName "ATI Rage XL AGP 2X"
Driver "ati"
EndSection
Section "Screen"
Identifier "screen1"
Device "device1"
Monitor "monitor1"
DefaultColorDepth 24
Subsection "Display"
Depth 8
Modes "640x480"
EndSubSection
Subsection "Display"
Depth 15
Modes "640x480"
EndSubsection
Subsection "Display"
Depth 16
Modes "640x480"
EndSubsection
Subsection "Display"
Depth 24
Modes "640x480"
EndSubsection
EndSection
Section "ServerLayout"
Identifier "layout1"
InputDevice "Keyboard1" "CoreKeyboard"
InputDevice "Mouse1" "CorePointer"
Screen "screen1"
EndSection
-------------------------------------------------------------------
Description of the problem
-------------------------------------------------------------------
XFree86 Version 4.3.0
Release Date: 27 February 2003
X Protocol Version 11, Revision 0, Release 6.6
Build Operating System: Linux 2.4.21-0.13mdksmp Mandrake distribution
Video Hardware: Monitor Tulip 14" SVGA colour CRT
Video Board: ATI Rage XL AGP 2X, RAM 8 Mb
MotherBoard: ASUS CUV4X-M
Problem: the pc boots in command line interface, loading everything
correctly.
This XF86Config-4 version has been modified by me: now I start X
interface by giving "X" command at the prompt, but what appears is a blue
screen with a big X in the middle that is the mouse pointer. At the
beginning of my modifies I could see the same blue screen with problem of
refreshing, it means I could see blue raws running from botton to top.
At my last modify, of which you can see the present XF86Config-4 file, I can
see the blue screen with the big X I was talking before.
My modifies consist in changing the refreshing range, I also tried several
drivers of the Linux distribution for ATI and other brands, but the risult
was the X program couldn?t start at all.
So the driver used now is the same as in the origin.
Moreover, I tried to use a different monitor, a model 772 CRT Dell monitor
with the same configuration file, except for refresh range, and the X
program was working pretty good: the pc already booted in X windows
interface. Now, I assume of course it's the monitor to have problem with the
Video Board.
What do you think?
Can I work it out with my Tulip monitor or not? Could you figure out what?s
the problem?
Thank you very much for your support!
Truly,
Alex
_________________________________________________________________
Don't just search. Find. Check out the new MSN Search!
http://search.msn.com/
_______________________________________________
XFree86 mailing list
XFree86@xxxxxxxxxxx
http://XFree86.Org/mailman/listinfo/xfree86
