Hello, I have ct69000 on motherboard. On XFree86-3.3.6 I'd set CMOS to 1024x768 and XF86Config (see below) to 800x600 and have X running full-screen from which I assume driver senses resolution difference and sets videochip to scale automatically. But on XFree86-4.5.0 with the same CMOS and XF86Config-4 resolutions I have 800x600 "window" at the center of the 1024x768 panel surrounded by black frame, no auto scaling. So how would I turn scaling on? Thank you, Pavel. -------------------------------------------- # XF86Config.3.3.6.800x600 <snip> # ********************************************************************** # Monitor section # ********************************************************************** Section "Monitor" Identifier "Generic Monitor" VendorName "Unknown" ModelName "Unknown" HorizSync 24.05-44.15 VertRefresh 51.03-60 Modeline "800x600" 36 800 824 896 1024 600 601 603 625 EndSection # ********************************************************************** # Graphics device section # ********************************************************************** Section "Device" Identifier "Generic VGA" VendorName "Unknown" BoardName "Unknown" Chipset "generic" EndSection Section "Device" Identifier "Generic SVGA" VendorName "Unknown" BoardName "Unknown" TextClockFreq 22.11 EndSection # ********************************************************************** # Screen sections # ********************************************************************** # The colour SVGA server Section "Screen" Driver "svga" Device "Generic SVGA" Monitor "Generic Monitor" DefaultColorDepth 24 Subsection "Display" Depth 24 Modes "800x600" ViewPort 0 0 EndSubsection EndSection --------------------------------------------------------------------- # XFree86-4_4.5.0.800x600x24 Section "ServerLayout" Identifier "Default Layout" Screen 0 "Screen0" 0 0 InputDevice "Mouse0" "CorePointer" InputDevice "Keyboard0" "CoreKeyboard" InputDevice "TouchScreen" "SendCoreEvents" EndSection Section "Files" <snip> EndSection Section "Module" <snip> EndSection Section "InputDevice" Identifier "Keyboard0" Driver "keyboard" EndSection Section "InputDevice" Identifier "Mouse0" Driver "mouse" Option "Protocol" "PS/2" Option "Device" "/dev/psaux" EndSection Section "InputDevice" Identifier "TouchScreen" <snip> EndSection Section "Monitor" Identifier "Monitor0" VendorName "Sharp" ModelName "LCD" HorizSync 24.0 - 61.0 VertRefresh 55.0 - 76.0 Option "dpms" EndSection Section "Device" Identifier "Videocard0" Driver "vesa" VendorName "Unknown" BoardName "Unknown" EndSection Section "Screen" Identifier "Screen0" Device "Videocard0" Monitor "Monitor0" DefaultDepth 24 SubSection "Display" Depth 24 Modes "800x600" #"1024x768" EndSubSection EndSection Section "ServerFlags" AllowMouseOpenFail EndSection Section "DRI" Group 0 Mode 0666 EndSection _______________________________________________ XFree86 mailing list XFree86@xxxxxxxxxxx http://XFree86.Org/mailman/listinfo/xfree86
