RE: xfree86 problem

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



   You can copy to a Windows formatted floppy using mtools.

mcopy /var/log/XFree86.0.log a:LOGFILE.TXT

or something like that.


		Mark.

On Tue, 17 Jan 2006, Garrett Jochimsen wrote:

> I can't get you the log file because I can't copy it from its location, when
> I put it on a floppy disk, it isn't readable in windows.  Anything else I
> could do?
>
>
> Garrett Jochimsen
> IT Department
> Documation LLC
> 715-552-5791
> garrett@xxxxxxxxxxxxxx
>
>
> -----Original Message-----
> From: xfree86-admin@xxxxxxxxxxx [mailto:xfree86-admin@xxxxxxxxxxx] On Behalf
> Of Mark Vojkovich
> Sent: Tuesday, January 17, 2006 12:00 PM
> To: xfree86@xxxxxxxxxxx
> Subject: RE:  xfree86 problem
>
>    We'll need to see the /var/log/XFree86.0.log file.  The answers
> are in there.
>
> 			Mark.
>
> On Mon, 16 Jan 2006, Garrett Jochimsen wrote:
>
> > Sorry, it still says failed to initialize core devises?  Any suggestions?
> >
> > Thanks a lot for the help.
> >
> > Garrett Jochimsen
> > IT Department
> > Documation LLC
> > 715-552-5791
> > garrett@xxxxxxxxxxxxxx
> >
> >
> > -----Original Message-----
> > From: xfree86-admin@xxxxxxxxxxx [mailto:xfree86-admin@xxxxxxxxxxx] On
> Behalf
> > Of Mark Vojkovich
> > Sent: Monday, January 16, 2006 11:46 AM
> > To: xfree86@xxxxxxxxxxx
> > Subject: Re:  xfree86 problem
> >
> >    You need to configure your X-server.  "XFree886 -configure" can
> > generate an /etc/X11/XF86Config file for you.
> >
> > 			Mark.
> >
> > On Mon, 16 Jan 2006, Garrett Jochimsen wrote:
> >
> > > Hello there, I'm trying to install the xfree86 program on my linux
> server
> > > and when I restarted the box it just gives me a bunch of errors.  I have
> > > followed the instructions but can't seem to get anywhere.  I'm a windows
> > guy
> > > and I'm sure this is over my head, but it has to get done and I'm
> working
> > my
> > > way through it best I can.  I was trying to get a tightvnc service on
> the
> > > server which said it wouldn't operate without xfree86 so I was going to
> > > install it.  The box won't startup at all now and says "unable to
> > > locate/open config file"  "fatal server error" "failed to initialize
> core
> > > devices"  Log file is under /var/log/xfree86.0.log, but I can't seem to
> > view
> > > that to show you a copy.  Is there anyway I can get some help with this?
> > A
> > > phone number would be great if I could get one.  Please help a lost IT
> > guy.
> > >
> > >
> > >
> > >
> > > Thank you very much.
> > >
> > >
> > >
> > > Garrett Jochimsen
> > >
> > > IT Department
> > >
> > > Documation LLC
> > >
> > > 715-552-5791
> > >
> > > garrett@xxxxxxxxxxxxxx
> > >
> > >
> > >
> > >
> > _______________________________________________
> > XFree86 mailing list
> > XFree86@xxxxxxxxxxx
> > http://XFree86.Org/mailman/listinfo/xfree86
> >
> > _______________________________________________
> > XFree86 mailing list
> > XFree86@xxxxxxxxxxx
> > http://XFree86.Org/mailman/listinfo/xfree86
> >
> _______________________________________________
> XFree86 mailing list
> XFree86@xxxxxxxxxxx
> http://XFree86.Org/mailman/listinfo/xfree86
>
> _______________________________________________
> XFree86 mailing list
> XFree86@xxxxxxxxxxx
> http://XFree86.Org/mailman/listinfo/xfree86
>
_______________________________________________
XFree86 mailing list
XFree86@xxxxxxxxxxx
http://XFree86.Org/mailman/listinfo/xfree86

[Index of Archives]     [X Forum]     [Xorg]     [XFree86 Newbie]     [IETF Announce]     [Security]     [Font Config]     [Bugtraq]     [Yosemite]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux Kernel]

  Powered by Linux