Re: Just start over

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



I assume you are working on the right file that is /etc/inittab.     vi
/etc/inittab  --> make changes --> :wq --> reboot. Then remove all xfree
packages
Garrett Jochimsen wrote:

>But, once I make the changes for the id:3:initdefault, how do I save the
>changes, there is no sample in the help file?  I did everything except for
>saving?  
>
>Garrett Jochimsen
>IT Department
>Documation LLC
>715-552-5791
>garrett@xxxxxxxxxxxxxx
> 
>
>-----Original Message-----
>From: xfree86-admin@xxxxxxxxxxx [mailto:xfree86-admin@xxxxxxxxxxx] On Behalf
>Of Alfred Hovdestad
>Sent: Tuesday, January 17, 2006 2:17 PM
>To: xfree86@xxxxxxxxxxx
>Subject: Re:  Just start over
>
>If you can't boot at all, there are two methods that I have used.  First 
>if your distribution comes with a rescue CD, you can boot off of that. 
>In Redhat, you can boot off disk 1 and enter linux rescue.
>
>If you don't have a rescue CD, the procedure is a little more involved, 
>but not terribly difficult.  If you are using grub as your bootloader, 
>you can enter an 'e' to edit the boot parameters when the grub menu is 
>displayed.  On the line that begins kernel, press 'e' again to edit the 
>line and add the word single to the end of the line.  That will boot 
>your system into single-user mode.
>
>
>Once you have the rescue mode running, you can edit the file 
>/etc/inittab  and change the following line:
>
>id:5:initdefault:
>
>to
>
>id:3:initdefault:
>
>and reboot.   This will boot you into multi-user mode without X11.  You 
>will then have your server running and you can tinker with X as you see fit.
>
>    Alfred Hovdestad, RHCE
>    University of Saskatchewan
>
>
>
>
>Garrett Jochimsen wrote:
>  
>
>>Hello there, I just want to get all programs associated with xfree86 off 
>>my linux server and try to install it from scratch.  Is there any easy 
>>way to do this?  I want to at least have my server up and running 
>>again.  Thank you very much for a quick answer.
>>
>> 
>>
>> 
>>
>>Garrett Jochimsen
>>
>>IT Department
>>
>>Documation LLC
>>
>>715-552-5791
>>
>>garrett@xxxxxxxxxxxxxx
>>
>> 
>>
>>    
>>
>_______________________________________________
>XFree86 mailing list
>XFree86@xxxxxxxxxxx
>http://XFree86.Org/mailman/listinfo/xfree86
>
>_______________________________________________
>XFree86 mailing list
>XFree86@xxxxxxxxxxx
>http://XFree86.Org/mailman/listinfo/xfree86
>  
>

_______________________________________________
XFree86 mailing list
XFree86@xxxxxxxxxxx
http://XFree86.Org/mailman/listinfo/xfree86

[Index of Archives]     [X Forum]     [Xorg]     [XFree86 Newbie]     [IETF Announce]     [Security]     [Font Config]     [Bugtraq]     [Yosemite]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux Kernel]

  Powered by Linux