I did not get the file you sent (XF86Config-4). well i tried lspci. i am attaching the output i have a personal computer and pentium 4 processor Intel D845WN motherboard --- gustavo halperin <ggusti@xxxxxxxxx> wrote: > Look, your xorg.conf looks very suspicious. First > you need say us which > computer do you have, > That is a Laptop or what, second I recommend you > search in the Internet > (maybe www.google.com/linux) > for some one with the same Graphic Card like you and > take her > XF86Config-4 to you. > I also don't understand why if you did install X.org > do you ask your > question in the XFree86 mailing list. > Last I send you a file XF86Config-4.vesa, just back > up your xorg.conf > and replace it by my config file, > in ,y config file I use the general driver vesa that > commonly work for > all the graphic card but whit out any > acceleration. After well when we will know what is > your Graphic Card we > will can try the specific one for > you. > In order to know which Graphic Card do you have try > run the function > 'lspci' and recognize there the > Graphic Card or just send my the output and I will > try help you. > > Good luck > Gustavo > > sowmya menon wrote: > > >Hello > >I dont have the file /etc/XF86Config-4 > >My config file is /etc/X11/xorg.conf > >I am sending the entire log file and the entire > >xorg.conf file > >Thanks > >Sowmya > > > >--- gustavo halperin <ggusti@xxxxxxxxx> wrote: > > > > > > > >>Do you have the file "/etc/XF86Config-4", can you > >>send it ?? > >> > >> Gustavo > >>sowmya menon wrote: > >> > >> > >> > >>>Hello, > >>> today i tried installing fedora 4 . when i > >>> > >>> > >>installed > >> > >> > >>>the previous versions it showed error "Unable to > >>> > >>> > >>probe > >> > >> > >>>video settings" while installation. but fedora 4 > >>> > >>> > >>didnt > >> > >> > >>>show any errors. it probed the video card -sis > >>>300/305. > >>>but after installation still the Gui didnt come > up. > >>> > >>> > >>i > >> > >> > >>>am sending the log file and config file. > >>> > >>>thanks > >>>Sowmya > >>> > >>> > >>> > >>> > >>> > >>> > >>>--- gustavo halperin <ggusti@xxxxxxxxx> wrote: > >>> > >>> > >>> > >>> > >>> > >>>>Hello > >>>> > >>>>Send me your "/etc/XF86Config-4" and the entire > >>>>"/var/log/XFree86.0.log" and > >>>>I will try find your problem. > >>>> > >>>> Gustavo > >>>> > >>>>sowmya menon wrote: > >>>> > >>>> > >>>> > >>>> > >>>> > >>>>>Hello, > >>>>> > >>>>>I installed Redhat 7.3 and the Gui didnt come > up. > >>>>> > >>>>> > >>>>> > >>>>> > >>>>the > >>>> > >>>> > >>>> > >>>> > >>>>>command prompt is there and i can execute > >>>>> > >>>>> > >>commands. > >> > >> > >>>>>but when i give startx, it showed the following > >>>>>errors. > >>>>>(==)Log File: '/var/log/XFree86.0.log" > >>>>>Parse error on line 242 > >>>>>Config file /etc/X11/XF86Config > >>>>>"Device" is not a valid keyword in this section > > >>>>> > >>>>>(EE) problem parsing config file > >>>>>(EE) Error from xf86HandleConfig() > >>>>> > >>>>>Fatal server error: no screens found > >>>>> > >>>>>xIO: Fatal IO error 104 (connection reset by > >>>>> > >>>>> > >>peer) > >> > >> > >>>>>on Xserver ":0.0" > >>>>>after 0 requests (0 known processed) > >>>>>with 0 events remaining > >>>>> > >>>>> > >>>>>i tried fedora core 1 and also 3. but i had the > >>>>> > >>>>> > >>>>> > >>>>> > >>>>same > >>>> > >>>> > >>>> > >>>> > >>>>>problem. the GUI didnt come up. > >>>>> > >>>>>I have Intel Pentium 4 processor and > motherboard > >>>>> > >>>>> > >>- > >> > >> > >>>>>Intel desktop Board D845WN > >>>>> > >>>>>how do i solve the problem? > >>>>> > >>>>>Sowmya > >>>>> > >>>>> > >>>>> > >>>>> > >>>>> > >>>>> > >>>>> > >>>>> > >>>>> > >>>>> > >>>>> > >>>>> > >>>>> > >>>__________________________________________________________ > >>> > >>> > >>>> > >>>> > >>>> > >>>> > >>>>>Yahoo! India Matrimony: Find your partner > online. > >>>>> > === message truncated ===> # XF86Config-4 (XFree86 X Window System server > configuration file) > # > # This file was generated by dexconf, the Debian X > Configuration tool, using > # values from the debconf database. > # > # Edit this file with caution, and see the > XF86Config-4 manual page. > # (Type "man XF86Config-4" at the shell prompt.) > # > # This file is automatically updated on > xserver-xfree86 package upgrades *only* > # if it has not been modified since the last upgrade > of the xserver-xfree86 > # package. > # > # If you have edited this file but would like it to > be automatically updated > # again, run the following commands as root: > # > # cp /etc/X11/XF86Config-4 > /etc/X11/XF86Config-4.custom > # md5sum /etc/X11/XF86Config-4 > >/var/lib/xfree86/XF86Config-4.md5sum > # dpkg-reconfigure xserver-xfree86 > > Section "Files" > FontPath "unix/:7100" # local font server > # if the local font server has problems, we can > fall back on these > FontPath "/usr/lib/X11/fonts/misc" > # FontPath "/usr/lib/X11/fonts/cyrillic" > FontPath "/usr/lib/X11/fonts/100dpi/:unscaled" > FontPath "/usr/lib/X11/fonts/75dpi/:unscaled" > FontPath "/usr/lib/X11/fonts/encodings" > FontPath "/usr/lib/X11/fonts/Type1" > FontPath "/usr/lib/X11/fonts/util" > # FontPath "/usr/lib/X11/fonts/CID" > FontPath "/usr/lib/X11/fonts/Speedo" > FontPath "/usr/lib/X11/fonts/100dpi" > FontPath "/usr/lib/X11/fonts/75dpi" > EndSection > > Section "Module" > Load "GLcore" > Load "bitmap" > Load "dbe" > Load "ddc" > Load "dri" > Load "extmod" > Load "freetype" > Load "glx" > Load "int10" > Load "record" > Load "speedo" > Load "type1" > Load "vbe" > # Load "tridentfb" > # Load "cyber2000fb" > EndSection > > Section "InputDevice" > Identifier "Generic Keyboard" > Driver "keyboard" > Option "CoreKeyboard" > Option "XkbRules" "x.org" #free86.ln > Option "XkbModel" "pc102" > Option "XkbLayout" "es,il,us" > Option "XkbOptions" "grp:shift_toggle" > # Option "XkbVariant" "ar" > # Option "XKbOptions" "" > EndSection > > Section "InputDevice" > Identifier "Configured Mouse" > Driver "mouse" > Option "CorePointer" > Option "Device" "/dev/psaux" > Option "Protocol" "PS/2" > Option "Emulate3Buttons" "true" > Option "ZAxisMapping" "4 5" > EndSection > Section "InputDevice" > Identifier "Generic Mouse" > Driver "mouse" > Option "SendCoreEvents" "true" > Option "Device" "/dev/input/mice" > Option "Protocol" "ImPS/2" > Option "Emulate3Buttons" "true" > Option "ZAxisMapping" "4 5" > EndSection > > Section "InputDevice" > Driver "synaptics" > Identifier "touchpad" > Option "AlwaysCore" > # Option "CorePointer" > Option "Device" "/dev/psaux" > Option "Protocol" "auto-dev" > Option "LeftEdge" "1700" > Option "RightEdge" "5300" > Option "TopEdge" "1700" > Option "BottomEdge" "4200" > Option "FingerLow" "25" > Option "FingerHigh" "30" > Option "MaxTapTime" "180" > Option "MaxTapMove" "220" > Option "VertScrollDelta" "100" > Option "MinSpeed" "0.06" > Option "MaxSpeed" "0.12" > Option "AccelFactor" "0.0010" > Option "SHMConfig" "on" > EndSection > > Section "Device" > Identifier "Generic Video Card" > Driver "vesa" > EndSection > > Section "Monitor" > Identifier "Generic Monitor" > HorizSync 28-50 > VertRefresh 43-75 > Option "DPMS" > EndSection > > Section "Screen" > Identifier "Default Screen" > Device "Generic Video Card" > Monitor "Generic Monitor" > DefaultDepth 24 > SubSection "Display" > Depth 1 > Modes "1024x768" "800x600" "640x480" > EndSubSection > SubSection "Display" > Depth 4 > Modes "1024x768" "800x600" "640x480" > EndSubSection > SubSection "Display" > Depth 8 > Modes "1024x768" "800x600" "640x480" > EndSubSection > SubSection "Display" > Depth 15 > Modes "1024x768" "800x600" "640x480" > EndSubSection > SubSection "Display" > Depth 16 > Modes "1024x768" "800x600" "640x480" > EndSubSection > SubSection "Display" > Depth 24 > Modes "1024x768" "800x600" "640x480" > EndSubSection > EndSection > > Section "ServerLayout" > Identifier "Default Layout" > Screen "Default Screen" > InputDevice "Generic Keyboard" > # InputDevice "touchpad" > InputDevice "Configured Mouse" > InputDevice "Generic Mouse" > EndSection > > Section "DRI" > Mode 0666 > EndSection > __________________________________________________________ Yahoo! India Matrimony: Find your partner now. Go to http://yahoo.shaadi.com
Attachment:
lspci_output.doc
Description: 2615593689-lspci_output.doc
