Ok, I've managed to get the Config file available to knoppix, below are it's contents, look fine to me.
I should possibly mention that hda2 doesn't show up in /mnt although
mtab lists that it should. If I try to mount it manually I get a
message that it is alreay mounted or "/ is busy". I've run
XFree86 -configure and then reboot the server, but the results are the
same, still can't find a good screen it says... I'm stumped
Section "ServerLayout"
Identifier "XFree86 Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
RgbPath "/usr/X11R6/lib/X11/rgb"
ModulePath "/usr/X11R6/lib/modules"
FontPath "/usr/X11R6/lib/X11/fonts/misc/"
FontPath "/usr/X11R6/lib/X11/fonts/Speedo/"
FontPath "/usr/X11R6/lib/X11/fonts/Type1/"
FontPath "/usr/X11R6/lib/X11/fonts/CID/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/"
EndSection
Section "Module"
Load "dbe"
Load "dri"
Load "extmod"
Load "glx"
Load "record"
Load "xtrap"
Load "speedo"
Load "type1"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "keyboard"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/mouse"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option
"NoAccel"
# [<bool>]
#Option
"SWcursor"
# [<bool>]
#Option
"Dac6Bit"
# [<bool>]
#Option
"Dac8Bit"
# [<bool>]
#Option
"DMAForXv"
# [<bool>]
#Option
"ForcePCIMode" #
[<bool>]
#Option
"CCEPIOMode"
# [<bool>]
#Option
"CCENoSecurity" #
[<bool>]
#Option
"CCEusecTimeout" # <i>
#Option
"AGPMode"
# <i>
#Option
"AGPSize"
# <i>
#Option
"RingSize"
# <i>
#Option
"BufferSize"
# <i>
#Option
"Display"
# <str>
#Option
"PanelWidth"
# <i>
#Option
"PanelHeight"
# <i>
#Option
"ProgramFPRegs" #
[<bool>]
#Option
"UseFBDev"
# [<bool>]
#Option
"VideoKey"
# <i>
#Option
"ShowCache"
# [<bool>]
Identifier "Card0"
Driver "ati"
VendorName "ATI Technologies Inc"
BoardName "Rage Mobility M3 AGP 2x"
BusID "PCI:1:0:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Depth 1
EndSubSection
SubSection "Display"
Depth 4
EndSubSection
SubSection "Display"
Depth 8
EndSubSection
SubSection "Display"
Depth 15
EndSubSection
SubSection "Display"
Depth 16
EndSubSection
SubSection "Display"
Depth 24
EndSubSection
EndSection
