Compaq Armada 1530

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



I make the installation from the begin, everything.......

I make download from ftp://ftp.xfree86.org/pub/XFree86/4.5.0/binaries/Linux-ix86-glibc23/ the 13 files according to installation details at http://www.xfree86.org/4.5.0/Install2.html#2 and http://www.xfree86.org/4.5.0/Install3.html#3 When finish the installation of XFree86 in root command line 'XFree86 -autoconfig' and then after few seconds the GUI it was black-white dots with a big cross cursor. No icons, no menu at right click, nothing at all........... I make reboots and then run again XFree86 -autoconfig and then after few seconds the GUI it was black-white dots with a big cross cursor. No icons, no menu at right click, nothing at all........... I make reboots and then run XFree86 -configure and then after few seconds the GUI it was black-white dots with a big cross cursor. No icons, no menu at right click, nothing at all...........
I make reboots and I do not change everything.....
I send you in attachments the: /var/log/XFree86.0.log , XFree86-install.log.244 , XFree86 -version , /etc//X11/XF86Config

After that, I made a connection with an external display Philips Brilliance 107P5 to laptop. I make login as root and execute 'sh xsetup.sh' in xserver versa set 800x600x8 - exit and login again as root. The GUI in Philips it was very good. What can I do to take the same GUI of Philips in display of my laptop Compaq Armada 1530?

Thanks in advance,
Ilias



_XSERVTransSocketOpenCOTSServer: Unable to open socket for inet6
_XSERVTransOpen: transport open failed for inet6/box:0
_XSERVTransMakeAllCOTSServerListeners: failed to open listener for inet6

XFree86 Version 4.5.0
Release Date: 16 March 2005
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.4.24 i686 [ELF] 
Current Operating System: Linux box 2.4.26 #1 SMP Sa Apr 17 19:33:42 CEST 2004 i586
Build Date: 16 March 2005
Changelog Date: 16 March 2005
	Before reporting problems, check http://www.XFree86.Org/
	to make sure that you have the latest version.
Module Loader present
Command line: XFree86 -autoconfig
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (EE) error, (WW) warning,
	(II) informational, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/XFree86.0.log", Time: Sun Oct  2 14:33:02 2005
(II) Module ABI versions:
	XFree86 ANSI C Emulation: 0.3
	XFree86 Video Driver: 0.8
	XFree86 XInput driver : 0.5
	XFree86 Server Extension : 0.3
	XFree86 Font Renderer : 0.5
(II) Loader running on linux
(--) using VT number 5

(II) LoadModule: "pcidata"
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="The XFree86 Project"
	compiled for 4.5.0, module version = 1.0.0
	ABI class: XFree86 Video Driver, version 0.8
(II) PCI: Probing config type using method 1
(II) PCI: Config type is 1
(II) PCI: stages = 0x03, oldVal1 = 0x80010040, mode1Res1 = 0x80000000
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 1045,c701 card 035c,0e11 rev 10 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 1045,c700 card 035c,0e11 rev 10 class 06,01,00 hdr 00
(II) PCI: 00:02:0: chip 1013,0038 card 0000,0000 rev 00 class 03,00,00 hdr 00
(II) PCI: 00:11:0: chip 104c,ac15 card 4000,0000 rev 01 class 06,07,00 hdr 82
(II) PCI: 00:11:1: chip 104c,ac15 card 4800,0000 rev 01 class 06,07,00 hdr 82
(II) PCI: 00:14:0: chip 1045,d568 card 035c,0e11 rev 12 class 01,01,80 hdr 00
(II) PCI: 01:00:0: chip 1011,0019 card 13d1,ab01 rev 41 class 02,00,00 hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,2), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
	[0] -1	0	0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
	[0] -1	0	0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
	[0] -1	0	0x00000000 - 0xffffffff (0x0) MX[B]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:1:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(II) PCI-to-CardBus bridge:
(II) Bus 1: bridge is at (0:17:0), (0,1,1), BCTRL: 0x0500 (VGA_EN is cleared)
(II) Bus 1 I/O range:
	[0] -1	0	0x00004000 - 0x000040ff (0x100) IX[B]
	[1] -1	0	0x00004400 - 0x000044ff (0x100) IX[B]
(II) Bus 1 non-prefetchable memory range:
	[0] -1	0	0x10400000 - 0x107fffff (0x400000) MX[B]
(II) Bus 1 prefetchable memory range:
	[0] -1	0	0x10000000 - 0x103fffff (0x400000) MX[B]
(II) PCI-to-CardBus bridge:
(II) Bus 2: bridge is at (0:17:1), (0,2,2), BCTRL: 0x05c0 (VGA_EN is cleared)
(II) Bus 2 I/O range:
	[0] -1	0	0x00004800 - 0x000048ff (0x100) IX[B]
	[1] -1	0	0x00004c00 - 0x00004cff (0x100) IX[B]
(II) Bus 2 non-prefetchable memory range:
	[0] -1	0	0x10c00000 - 0x10ffffff (0x400000) MX[B]
(II) Bus 2 prefetchable memory range:
	[0] -1	0	0x10800000 - 0x10bfffff (0x400000) MX[B]
(--) PCI:*(0:2:0) Cirrus Logic GD 7548 rev 0, Mem @ 0x40000000/24, 0x41000000/24
(II) AutoConfig: Primary PCI is 0:2:0
(II) AutoConfig: Running "/usr/X11R6/bin/getconfig -X 40500000 -I /etc/X11,/usr/X11R6/etc/X11,/usr/X11R6/lib/modules,/usr/X11R6/lib/X11/getconfig -v 0x1013 -d 0x0038 -r 0x00 -s 0x0000 -b 0x0000 -c 0x0300".
(II) AutoConfig: New driver is "cirrus".
(==) Using default built-in configuration (54 lines)
(==) --- Start of built-in configuration ---
	Section "Module"
		Identifier	"Builtin Default Modules"
		Load	"extmod"
		Load	"dbe"
		Load	"glx"
		Load	"freetype"
	EndSection
	Section "Monitor"
		Identifier	"Builtin Default Monitor"
		Option	"TargetRefresh"	"75.0"
	EndSection
	Section "Device"
		Identifier	"Builtin Default cirrus Device 0"
		Driver	"cirrus"
	EndSection
	Section "Screen"
		Identifier	"Builtin Default cirrus Screen 0"
		Device	"Builtin Default cirrus Device 0"
		Monitor	"Builtin Default Monitor"
	EndSection
	Section "Device"
		Identifier	"Builtin Default fbdev Device 0"
		Driver	"fbdev"
	EndSection
	Section "Screen"
		Identifier	"Builtin Default fbdev Screen 0"
		Device	"Builtin Default fbdev Device 0"
		Monitor	"Builtin Default Monitor"
	EndSection
	Section "Device"
		Identifier	"Builtin Default vesa Device 0"
		Driver	"vesa"
	EndSection
	Section "Screen"
		Identifier	"Builtin Default vesa Screen 0"
		Device	"Builtin Default vesa Device 0"
		Monitor	"Builtin Default Monitor"
	EndSection
	Section "Device"
		Identifier	"Builtin Default vga Device 0"
		Driver	"vga"
	EndSection
	Section "Screen"
		Identifier	"Builtin Default vga Screen 0"
		Device	"Builtin Default vga Device 0"
		Monitor	"Builtin Default Monitor"
	EndSection
	Section "ServerLayout"
		Identifier	"Builtin Default Layout"
		Screen	"Builtin Default cirrus Screen 0"
		Screen	"Builtin Default fbdev Screen 0"
		Screen	"Builtin Default vesa Screen 0"
		Screen	"Builtin Default vga Screen 0"
	EndSection
(==) --- End of built-in configuration ---
(==) Keyboard: CustomKeycode disabled.
(WW) The core pointer device wasn't specified explicitly in the layout.
	Using the default mouse configuration.
(WW) The core keyboard device wasn't specified explicitly in the layout.
	Using the default keyboard configuration.
(==) ServerLayout "Builtin Default Layout"
(==) |-->Screen "Builtin Default cirrus Screen 0" (0) (0, 0)
(**) |  |-->Device "Builtin Default cirrus Device 0"
(**) |  |-->Monitor "Builtin Default Monitor" (0)
(==) |-->Screen "Builtin Default fbdev Screen 0" (1) (0, 0)
(**) |  |-->Device "Builtin Default fbdev Device 0"
(**) |  |-->Monitor "Builtin Default Monitor" (0)
(==) |-->Screen "Builtin Default vesa Screen 0" (2) (0, 0)
(**) |  |-->Device "Builtin Default vesa Device 0"
(**) |  |-->Monitor "Builtin Default Monitor" (0)
(==) |-->Screen "Builtin Default vga Screen 0" (3) (0, 0)
(**) |  |-->Device "Builtin Default vga Device 0"
(**) |  |-->Monitor "Builtin Default Monitor" (0)
(==) |-->Input Device "<default pointer>"
(==) |-->Input Device "<default keyboard>"
(WW) The directory "/usr/X11R6/lib/X11/fonts/TTF/" does not exist.
	Entry deleted from font path.
(WW) The directory "/usr/X11R6/lib/X11/fonts/Speedo/" does not exist.
	Entry deleted from font path.
(WW) The directory "/usr/X11R6/lib/X11/fonts/Type1/" does not exist.
	Entry deleted from font path.
(WW) The directory "/usr/X11R6/lib/X11/fonts/100dpi/" does not exist.
	Entry deleted from font path.
(==) FontPath set to "/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/CID/,/usr/X11R6/lib/X11/fonts/75dpi/"
(==) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(==) ModulePath set to "/usr/X11R6/lib/modules"
(II) Checking for unused ServerFlags options:
(II) LoadModule: "bitmap"
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="The XFree86 Project"
	compiled for 4.5.0, module version = 1.0.0
	Module class: XFree86 Font Renderer
	ABI class: XFree86 Font Renderer, version 0.5
(II) Loading font Bitmap
(II) Open APM successful
(II) Addressable bus resource ranges are
	[0] -1	0	0x00000000 - 0xffffffff (0x0) MX[B]
	[1] -1	0	0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
	[0] -1	0	0xffe00000 - 0xffffffff (0x200000) MX[B](B)
	[1] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[2] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[3] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[4] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[5] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[6] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
(II) Active PCI resource ranges:
	[0] -1	0	0x10000000 - 0x1003ffff (0x40000) MX[B]
	[1] -1	0	0x10400000 - 0x104003ff (0x400) MX[B]
	[2] -1	0	0x41000000 - 0x41ffffff (0x1000000) MX[B](B)
	[3] -1	0	0x40000000 - 0x40ffffff (0x1000000) MX[B](B)
	[4] -1	0	0x00004000 - 0x0000407f (0x80) IX[B]
	[5] -1	0	0x00001000 - 0x0000100f (0x10) IX[B]E
(II) Active PCI resource ranges after removing overlaps:
	[0] -1	0	0x10000000 - 0x1003ffff (0x40000) MX[B]
	[1] -1	0	0x10400000 - 0x104003ff (0x400) MX[B]
	[2] -1	0	0x41000000 - 0x41ffffff (0x1000000) MX[B](B)
	[3] -1	0	0x40000000 - 0x40ffffff (0x1000000) MX[B](B)
	[4] -1	0	0x00004000 - 0x0000407f (0x80) IX[B]
	[5] -1	0	0x00001000 - 0x0000100f (0x10) IX[B]E
(II) OS-reported resource ranges after removing overlaps with PCI:
	[0] -1	0	0xffe00000 - 0xffffffff (0x200000) MX[B](B)
	[1] -1	0	0x00100000 - 0x0fffffff (0xff00000) MX[B]E(B)
	[2] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[3] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[4] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[5] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[6] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
	[0] -1	0	0xffe00000 - 0xffffffff (0x200000) MX[B](B)
	[1] -1	0	0x00100000 - 0x0fffffff (0xff00000) MX[B]E(B)
	[2] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[3] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[4] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[5] -1	0	0x10000000 - 0x1003ffff (0x40000) MX[B]
	[6] -1	0	0x10400000 - 0x104003ff (0x400) MX[B]
	[7] -1	0	0x41000000 - 0x41ffffff (0x1000000) MX[B](B)
	[8] -1	0	0x40000000 - 0x40ffffff (0x1000000) MX[B](B)
	[9] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[10] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
	[11] -1	0	0x00004000 - 0x0000407f (0x80) IX[B]
	[12] -1	0	0x00001000 - 0x0000100f (0x10) IX[B]E
(II) LoadModule: "extmod"
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="The XFree86 Project"
	compiled for 4.5.0, module version = 1.0.0
	Module class: XFree86 Server Extension
	ABI class: XFree86 Server Extension, version 0.3
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension FontCache
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="The XFree86 Project"
	compiled for 4.5.0, module version = 1.0.0
	Module class: XFree86 Server Extension
	ABI class: XFree86 Server Extension, version 0.3
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/X11R6/lib/modules/extensions/libglx.a
(II) Module glx: vendor="The XFree86 Project"
	compiled for 4.5.0, module version = 1.0.0
	ABI class: XFree86 Server Extension, version 0.3
(II) Loading sub module "GLcore"
(II) LoadModule: "GLcore"
(II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a
(II) Module GLcore: vendor="The XFree86 Project"
	compiled for 4.5.0, module version = 1.0.0
	ABI class: XFree86 Server Extension, version 0.3
(II) Loading extension GLX
(II) LoadModule: "freetype"
(II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.a
(II) Module freetype: vendor="The XFree86 Project & the After X-TT Project"
	compiled for 4.5.0, module version = 2.1.0
	Module class: XFree86 Font Renderer
	ABI class: XFree86 Font Renderer, version 0.5
(II) Loading font FreeType
(II) LoadModule: "cirrus"
(II) Loading /usr/X11R6/lib/modules/drivers/cirrus_drv.o
(II) Module cirrus: vendor="The XFree86 Project"
	compiled for 4.5.0, module version = 1.0.0
	Module class: XFree86 Video Driver
	ABI class: XFree86 Video Driver, version 0.8
(II) LoadModule: "fbdev"
(II) Loading /usr/X11R6/lib/modules/drivers/fbdev_drv.o
(II) Module fbdev: vendor="The XFree86 Project"
	compiled for 4.5.0, module version = 0.1.0
	ABI class: XFree86 Video Driver, version 0.8
(II) LoadModule: "vesa"
(II) Loading /usr/X11R6/lib/modules/drivers/vesa_drv.o
(II) Module vesa: vendor="The XFree86 Project"
	compiled for 4.5.0, module version = 1.0.0
	Module class: XFree86 Video Driver
	ABI class: XFree86 Video Driver, version 0.8
(II) LoadModule: "vga"
(II) Loading /usr/X11R6/lib/modules/drivers/vga_drv.o
(II) Module vga: vendor="The XFree86 Project"
	compiled for 4.5.0, module version = 4.0.0
	Module class: XFree86 Video Driver
	ABI class: XFree86 Video Driver, version 0.8
(II) LoadModule: "mouse"
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="The XFree86 Project"
	compiled for 4.5.0, module version = 1.0.0
	Module class: XFree86 XInput Driver
	ABI class: XFree86 XInput driver, version 0.5
(II) CIRRUS: driver for Cirrus chipsets: CLGD5430, CLGD5434-4, CLGD5434-8,
	CLGD5436, CLGD5446, CLGD5480, CL-GD5462, CL-GD5464, CL-GD5464BD,
	CL-GD5465, CL-GD7548, CL-GD7555, CL-GD7556
(II) FBDEV: driver for framebuffer: fbdev, afb
(II) VESA: driver for VESA chipsets: vesa
(II) VGA: Generic VGA driver (version 4.0) for chipsets: generic
(II) Primary Device is: PCI 00:02:0
(--) Assigning device section with no busID to primary device
(--) Chipset CL-GD7548 found
(II) Loading sub module "cirrus_alpine"
(II) LoadModule: "cirrus_alpine"
(II) Loading /usr/X11R6/lib/modules/drivers/cirrus_alpine.o
(II) Module cirrus_alpine: vendor="The XFree86 Project"
	compiled for 4.5.0, module version = 1.0.0
	ABI class: XFree86 Video Driver, version 0.8
(II) resource ranges after xf86ClaimFixedResources() call:
	[0] -1	0	0xffe00000 - 0xffffffff (0x200000) MX[B](B)
	[1] -1	0	0x00100000 - 0x0fffffff (0xff00000) MX[B]E(B)
	[2] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[3] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[4] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[5] -1	0	0x10000000 - 0x1003ffff (0x40000) MX[B]
	[6] -1	0	0x10400000 - 0x104003ff (0x400) MX[B]
	[7] -1	0	0x41000000 - 0x41ffffff (0x1000000) MX[B](B)
	[8] -1	0	0x40000000 - 0x40ffffff (0x1000000) MX[B](B)
	[9] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[10] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
	[11] -1	0	0x00004000 - 0x0000407f (0x80) IX[B]
	[12] -1	0	0x00001000 - 0x0000100f (0x10) IX[B]E
(II) Loading sub module "fbdevhw"
(II) LoadModule: "fbdevhw"
(II) Loading /usr/X11R6/lib/modules/linux/libfbdevhw.a
(II) Module fbdevhw: vendor="The XFree86 Project"
	compiled for 4.5.0, module version = 0.0.2
	ABI class: XFree86 Video Driver, version 0.8
(EE) open /dev/fb0: No such device
(--) Assigning device section with no busID to primary device
(--) Chipset vesa found
(--) Assigning device section with no busID to primary device
(--) Chipset generic found
(II) resource ranges after probing:
	[0] -1	0	0xffe00000 - 0xffffffff (0x200000) MX[B](B)
	[1] -1	0	0x00100000 - 0x0fffffff (0xff00000) MX[B]E(B)
	[2] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[3] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[4] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[5] -1	0	0x10000000 - 0x1003ffff (0x40000) MX[B]
	[6] -1	0	0x10400000 - 0x104003ff (0x400) MX[B]
	[7] -1	0	0x41000000 - 0x41ffffff (0x1000000) MX[B](B)
	[8] -1	0	0x40000000 - 0x40ffffff (0x1000000) MX[B](B)
	[9] 0	0	0x000a0000 - 0x000affff (0x10000) MS[B]
	[10] 0	0	0x000b0000 - 0x000b7fff (0x8000) MS[B]
	[11] 0	0	0x000b8000 - 0x000bffff (0x8000) MS[B]
	[12] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[13] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
	[14] -1	0	0x00004000 - 0x0000407f (0x80) IX[B]
	[15] -1	0	0x00001000 - 0x0000100f (0x10) IX[B]E
	[16] 0	0	0x000003b0 - 0x000003bb (0xc) IS[B]
	[17] 0	0	0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/X11R6/lib/modules/libvgahw.a
(II) Module vgahw: vendor="The XFree86 Project"
	compiled for 4.5.0, module version = 0.1.0
	ABI class: XFree86 Video Driver, version 0.8
(II) CIRRUS(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/X11R6/lib/modules/linux/libint10.a
(II) Module int10: vendor="The XFree86 Project"
	compiled for 4.5.0, module version = 1.0.0
	ABI class: XFree86 Video Driver, version 0.8
(II) CIRRUS(0): initializing int10
(II) CIRRUS(0): Primary V_BIOS segment is: 0xc000
(II) CIRRUS(0): Creating default Display subsection in Screen section
	"Builtin Default cirrus Screen 0" for depth/fbbpp 16/16
(==) CIRRUS(0): Depth 16, (==) framebuffer bpp 16
(==) CIRRUS(0): RGB weight 565
(==) CIRRUS(0): Default visual is TrueColor
(==) CIRRUS(0): Using SW cursor
(--) CIRRUS(0): Linear framebuffer at 0x40000000
(--) CIRRUS(0): Using MMIO
(--) CIRRUS(0): MMIO registers at 0x41000000
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Loading /usr/X11R6/lib/modules/libi2c.a
(II) Module i2c: vendor="The XFree86 Project"
	compiled for 4.5.0, module version = 1.2.0
	ABI class: XFree86 Video Driver, version 0.8
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Loading /usr/X11R6/lib/modules/libddc.a
(II) Module ddc: vendor="The XFree86 Project"
	compiled for 4.5.0, module version = 1.0.0
	ABI class: XFree86 Video Driver, version 0.8
(EE) CIRRUS(0): I2C initialization failed
(--) CIRRUS(0): LCD display: 800x600 DSTN (dual scan color)
(==) CIRRUS(0): Using gamma correction (1.0, 1.0, 1.0)
(WW) CIRRUS(0): Failed to set up write-combining range (0x40000000,0x100000)
(--) CIRRUS(0): Memory Config reg 1 is 0x31
(--) CIRRUS(0): VideoRAM: 1024 kByte
(==) CIRRUS(0): Min pixel clock is 12 MHz
(--) CIRRUS(0): Max pixel clock is 80 MHz
(II) CIRRUS(0): Builtin Default Monitor: Using default hsync range of 28.00-33.00 kHz
(II) CIRRUS(0): Builtin Default Monitor: Using default vrefresh range of 43.00-72.00 Hz
(II) CIRRUS(0): Clock range:  12.00 to  80.10 MHz
(II) CIRRUS(0): Not using default mode "640x350" (hsync out of range)
(II) CIRRUS(0): Not using default mode "320x175" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "640x400" (hsync out of range)
(II) CIRRUS(0): Not using default mode "320x200" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "720x400" (hsync out of range)
(II) CIRRUS(0): Not using default mode "360x200" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "640x480" (hsync out of range)
(II) CIRRUS(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "640x480" (hsync out of range)
(II) CIRRUS(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "640x480" (hsync out of range)
(II) CIRRUS(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "800x600" (hsync out of range)
(II) CIRRUS(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "800x600" (hsync out of range)
(II) CIRRUS(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "800x600" (hsync out of range)
(II) CIRRUS(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "800x600" (hsync out of range)
(II) CIRRUS(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "800x600" (hsync out of range)
(II) CIRRUS(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "1024x768" (insufficient memory for mode)
(II) CIRRUS(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "1024x768" (insufficient memory for mode)
(II) CIRRUS(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "1024x768" (insufficient memory for mode)
(II) CIRRUS(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "1024x768" (insufficient memory for mode)
(II) CIRRUS(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "1024x768" (insufficient memory for mode)
(II) CIRRUS(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "1152x864" (insufficient memory for mode)
(II) CIRRUS(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "1280x960" (insufficient memory for mode)
(II) CIRRUS(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "1280x960" (insufficient memory for mode)
(II) CIRRUS(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "1280x1024" (insufficient memory for mode)
(II) CIRRUS(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "1280x1024" (insufficient memory for mode)
(II) CIRRUS(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "1280x1024" (insufficient memory for mode)
(II) CIRRUS(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "1600x1200" (insufficient memory for mode)
(II) CIRRUS(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "1600x1200" (insufficient memory for mode)
(II) CIRRUS(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "1600x1200" (insufficient memory for mode)
(II) CIRRUS(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "1600x1200" (insufficient memory for mode)
(II) CIRRUS(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "1600x1200" (insufficient memory for mode)
(II) CIRRUS(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "1792x1344" (insufficient memory for mode)
(II) CIRRUS(0): Not using default mode "896x672" (insufficient memory for mode)
(II) CIRRUS(0): Not using default mode "1792x1344" (insufficient memory for mode)
(II) CIRRUS(0): Not using default mode "896x672" (insufficient memory for mode)
(II) CIRRUS(0): Not using default mode "1856x1392" (insufficient memory for mode)
(II) CIRRUS(0): Not using default mode "928x696" (insufficient memory for mode)
(II) CIRRUS(0): Not using default mode "1856x1392" (insufficient memory for mode)
(II) CIRRUS(0): Not using default mode "928x696" (insufficient memory for mode)
(II) CIRRUS(0): Not using default mode "1920x1440" (insufficient memory for mode)
(II) CIRRUS(0): Not using default mode "960x720" (insufficient memory for mode)
(II) CIRRUS(0): Not using default mode "1920x1440" (insufficient memory for mode)
(II) CIRRUS(0): Not using default mode "960x720" (insufficient memory for mode)
(II) CIRRUS(0): Not using default mode "832x624" (hsync out of range)
(II) CIRRUS(0): Not using default mode "416x312" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "1152x768" (insufficient memory for mode)
(II) CIRRUS(0): Not using default mode "576x384" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "1152x864" (insufficient memory for mode)
(II) CIRRUS(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "1400x1050" (insufficient memory for mode)
(II) CIRRUS(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "1400x1050" (insufficient memory for mode)
(II) CIRRUS(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "1600x1024" (insufficient memory for mode)
(II) CIRRUS(0): Not using default mode "800x512" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "1920x1440" (insufficient memory for mode)
(II) CIRRUS(0): Not using default mode "960x720" (insufficient memory for mode)
(II) CIRRUS(0): Not using default mode "2048x1536" (insufficient memory for mode)
(II) CIRRUS(0): Not using default mode "1024x768" (insufficient memory for mode)
(II) CIRRUS(0): Not using default mode "2048x1536" (insufficient memory for mode)
(II) CIRRUS(0): Not using default mode "1024x768" (insufficient memory for mode)
(II) CIRRUS(0): Not using default mode "2048x1536" (insufficient memory for mode)
(II) CIRRUS(0): Not using default mode "1024x768" (insufficient memory for mode)
(**) Option "TargetRefresh" "75.0"
(--) CIRRUS(0): Virtual size is 640x480 (pitch 640)
(**) CIRRUS(0): *Default mode "640x480": 25.2 MHz, 31.5 kHz, 60.0 Hz
(II) CIRRUS(0): Modeline "640x480"   25.20  640 656 752 800  480 490 492 525 -hsync -vsync
(==) CIRRUS(0): DPI set to (75, 75)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/X11R6/lib/modules/libfb.a
(II) Module fb: vendor="The XFree86 Project"
	compiled for 4.5.0, module version = 1.0.0
	ABI class: XFree86 ANSI C Emulation, version 0.3
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/X11R6/lib/modules/libxaa.a
(II) Module xaa: vendor="The XFree86 Project"
	compiled for 4.5.0, module version = 1.1.0
	ABI class: XFree86 Video Driver, version 0.8
(II) UnloadModule: "fbdev"
(II) Unloading /usr/X11R6/lib/modules/drivers/fbdev_drv.o
(II) UnloadModule: "fbdevhw"
(II) Unloading /usr/X11R6/lib/modules/linux/libfbdevhw.a
(II) UnloadModule: "vesa"
(II) Unloading /usr/X11R6/lib/modules/drivers/vesa_drv.o
(II) UnloadModule: "vga"
(II) Unloading /usr/X11R6/lib/modules/drivers/vga_drv.o
(II) do I need RAC?  No, I don't.
(II) resource ranges after preInit:
	[0] 0	0	0x41000000 - 0x41ffffff (0x1000000) MX[B]
	[1] 0	0	0x40000000 - 0x40ffffff (0x1000000) MX[B]
	[2] -1	0	0xffe00000 - 0xffffffff (0x200000) MX[B](B)
	[3] -1	0	0x00100000 - 0x0fffffff (0xff00000) MX[B]E(B)
	[4] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[5] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[6] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[7] -1	0	0x10000000 - 0x1003ffff (0x40000) MX[B]
	[8] -1	0	0x10400000 - 0x104003ff (0x400) MX[B]
	[9] -1	0	0x41000000 - 0x41ffffff (0x1000000) MX[B](B)
	[10] -1	0	0x40000000 - 0x40ffffff (0x1000000) MX[B](B)
	[11] 0	0	0x000a0000 - 0x000affff (0x10000) MS[B](OprU)
	[12] 0	0	0x000b0000 - 0x000b7fff (0x8000) MS[B](OprU)
	[13] 0	0	0x000b8000 - 0x000bffff (0x8000) MS[B](OprU)
	[14] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[15] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
	[16] -1	0	0x00004000 - 0x0000407f (0x80) IX[B]
	[17] -1	0	0x00001000 - 0x0000100f (0x10) IX[B]E
	[18] 0	0	0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
	[19] 0	0	0x000003c0 - 0x000003df (0x20) IS[B](OprU)
(WW) CIRRUS(0): Failed to set up write-combining range (0x40000000,0x100000)
(II) CIRRUS(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
UseMMIO: SR17= 5
(II) CIRRUS(0): Using 339 lines for offscreen memory
(II) CIRRUS(0): Using XFree86 Acceleration Architecture (XAA)
	Screen to screen bit blits
	Solid filled rectangles
	Solid Horizontal and Vertical Lines
(==) CIRRUS(0): Silken mouse enabled
(==) CIRRUS(0): DPMS disabled
(==) RandR enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension LBX
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(WW) <default pointer>: No Device specified, looking for one...
(II) <default pointer>: Setting Device option to "/dev/mouse"
(--) <default pointer>: Device: "/dev/mouse"
(==) <default pointer>: Protocol: "Auto"
(**) Option "CorePointer"
(**) <default pointer>: Core Pointer
(==) <default pointer>: Emulate3Buttons, Emulate3Timeout: 50
(==) <default pointer>: Buttons: 3
(II) Keyboard "<default keyboard>" handled by legacy driver
(II) XINPUT: Adding extended input device "<default pointer>" (type: MOUSE)
(II) <default pointer>: GuessProtocol: setting mouse protocol to "PS/2"
(II) <default pointer>: ps2EnableDataReporting: succeeded
Could not init font path element /usr/X11R6/lib/X11/fonts/CID/, removing from list!

Attachment: xfversion
Description: Binary data

		Welcome to the XFree86(R) 4.5.0 installer

You are strongly advised to backup your existing XFree86 installation
before proceeding.  This includes the /usr/X11R6, /etc/X11
and /etc/fonts directories.  The installation process will
overwrite existing files in those directories, and this may include
some configuration files that have been customised either by you
or by your OS distribution.  Although an attempt is made to make backup
copies of these files and directories before overwriting them, this is
not a failsafe procedure.  The backup copies will have a suffix
".244".  The installation is logged.  Refer to the log
file "XFree86-install.log.244" in the current directory if you
have problems during or after the installation.

When making your own backup of the installation directories before 
proceeding with this installation, do it by making a copy of those
directories and their contents.  Do not simply rename them.  Otherwise
you may find that many of your existing applications will no longer be
visible.

If you are installing a version different from 4.5.0, you
may need an updated version of this installer script.

Do you wish to continue? (y/n) [n] 
Checking which OS you're running...
uname reports 'Linux' version '2.4.26', architecture 'i586'.


Bindist version is 4.5.0
Checking for required files ...


You appear to have an existing installation of X.  Continuing will
overwrite it.  You will, however, have the option of being prompted
before most configuration files are overwritten.

Do you wish to continue? (y/n) [y] 

Removing some old files that are no longer required...


Removing some old directories that are no longer required...
	removing old directory /usr/X11R6/lib/X11/xkb/compiled

Extracting Xetc.tgz and Xrc.tgz into a temporary location ...
== Extracting /root/q/Xetc.tgz ==
== Extracting /root/q/Xrc.tgz ==

Configuration files will now be installed.  There are some cases where
installing these files over existing files will adversely affect your
previous desktop configuration, and some other cases where the new files
are essential for the correct operation of the new installation.
These cases will noted before any old files are overwritten.

Do you want to overwrite the app-defaults config files? (y/n) [n] 
Making a backup of /etc/X11/app-defaults to /etc/X11/app-defaults.244
Installing the app-defaults config files ...
Do you want to overwrite the fs config files? (y/n) [n] 
Making a backup of /etc/X11/fs to /etc/X11/fs.244
Installing the fs config files ...
Do you want to overwrite the lbxproxy config files? (y/n) [n] 
Making a backup of /etc/X11/lbxproxy to /etc/X11/lbxproxy.244
Installing the lbxproxy config files ...
Do you want to overwrite the proxymngr config files? (y/n) [n] 
Making a backup of /etc/X11/proxymngr to /etc/X11/proxymngr.244
Installing the proxymngr config files ...
Do you want to overwrite the rstart config files? (y/n) [n] 
Making a backup of /etc/X11/rstart to /etc/X11/rstart.244
Installing the rstart config files ...
Do you want to overwrite the twm config files? (y/n) [n] 
Making a backup of /etc/X11/twm to /etc/X11/twm.244
Installing the twm config files ...

Installing the xdm configuration files may prevent your
previous desktop configuration from coming up.
If you have this problem, restore the saved originals.

Do you want to overwrite the xdm config files? (y/n) [n] 
Making a backup of /etc/X11/xdm to /etc/X11/xdm.244
Installing the xdm config files ...

Installing the xinit configuration files may prevent your
previous desktop configuration from coming up.
If you have this problem, restore the saved originals.

Do you want to overwrite the xinit config files? (y/n) [n] 
Making a backup of /etc/X11/xinit to /etc/X11/xinit.244
Installing the xinit config files ...

If the XKB configuration files are not updated you may
experience problems running the latest XFree86 server.

Do you want to overwrite the xkb config files? (y/n) [n] 
Making a backup of /etc/X11/xkb to /etc/X11/xkb.244
Installing the xkb config files ...
Do you want to overwrite the xsm config files? (y/n) [n] 
Making a backup of /etc/X11/xsm to /etc/X11/xsm.244
Installing the xsm config files ...
Do you want to overwrite the xserver config files? (y/n) [n] 
Making a backup of /etc/X11/xserver to /etc/X11/xserver.244
Installing the xserver config files ...
Do you want to overwrite the fonts.conf config file? (y/n) [n] 
Making a backup of /etc/fonts/fonts.conf to /etc/fonts/fonts.conf.244
Installing the fonts.conf config file ...
Do you want to overwrite the fonts.dtd config file? (y/n) [n] 
Making a backup of /etc/fonts/fonts.dtd to /etc/fonts/fonts.dtd.244
Installing the fonts.dtd config file ...

Installing the mandatory parts of the binary distribution

== Extracting /root/q/Xbin.tgz ==
== Extracting /root/q/Xlib.tgz ==
== Extracting /root/q/Xman.tgz ==
== Extracting /root/q/Xdoc.tgz ==
== Extracting /root/q/Xfnts.tgz ==
== Extracting /root/q/Xfenc.tgz ==
== Extracting /root/q/Xxserv.tgz ==
== Extracting /root/q/Xmod.tgz ==
== Extracting /root/q/Xvar.tgz ==
Checking for post-release updates ...
Checking for optional components to install ...

Searching for a termcap file.  This may take a few seconds...

You appear to have a terminfo directory: /usr/lib/terminfo
New xterm terminfo entries can be installed now.

Note: the new xterm entries are required to take full advantage
of new features, but they may cause problems when used with
older versions of xterm.  A terminal type 'xterm-r6' is included
for compatibility with the standard X11R6 version of xterm.

Do you wish to have the new xterm terminfo entries installed
now (y/n)? [n] 

Moving old terminfo file /usr/lib/terminfo/x/xterm to /usr/lib/terminfo/x/xterm.bak
Moving old terminfo file /usr/lib/terminfo/x/xterm-r6 to /usr/lib/terminfo/x/xterm-r6.bak
Moving old terminfo file /usr/lib/terminfo/x/xterm-r5 to /usr/lib/terminfo/x/xterm-r5.bak

Installing new terminfo entries for xterm.

On some systems you may get warnings from tic about 'meml'
and 'memu'.  These warnings can safely be ignored.


On some platforms (e.g., Linux), the OpenGL standard requires
that the GL shared library and header files be visible from the
standard system lib and include directories (/usr/lib and
/usr/include).  This can be done by installing links in those
directories to the files that have been installed under /usr/X11R6.

NOTE: installing these links will overwrite existing files or
links.

Do you wish to have the (new) links installed (y/n)? [n] Creating link from /usr/X11R6/lib/libGL.so to /usr/lib/libGL.so
Creating link from /usr/X11R6/lib/libGL.so.1 to /usr/lib/libGL.so.1

Running ldconfig

Updating the fonts.dir file in /usr/X11R6/lib/X11/fonts/local...
Updating the fonts.dir file in /usr/X11R6/lib/X11/fonts/misc...

If you are going to use rstart and /usr/X11R6/bin isn't in the
default path for commands run remotely via rsh, you will need
a link to rstartd installed in /usr/bin.

Do you wish to have this link installed (y/n)? [n] 
Creating link from /usr/X11R6/bin/rstartd to /usr/bin/rstartd

Installation complete.

The log for this installation is XFree86-install.log.244


[Index of Archives]     [X Forum]     [Xorg]     [XFree86 Newbie]     [IETF Announce]     [Security]     [Font Config]     [Bugtraq]     [Yosemite]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux Kernel]

  Powered by Linux