Note, I sent you two separate mail on what to try out. One with xfs and the other without. Have a good weekend! Bukie Norm wrote: > It'll be (at least) Monday before I get back on the aircraft but I > definitely will do those things. > > Thanks much. > > Norm > > ----- Original Message ----- > From: "Bukie Mabayoje" <bukiemab@xxxxxxx> > To: <xfree86@xxxxxxxxxxx> > Sent: Friday, March 11, 2005 3:49 PM > Subject: Re: Partially successful installation/startup > > > 1. Remove this line from your configuration file and try it again > > FontPath "/usr/X11R6/lib/X11/fonts/TrueType" > > 2. Also, make sure you have > > FontPath "unix/:7100" > > 3. Make sure xfs is running > > do ps -eaf | grep xfs to verify > > 4. Check the port number > > do netstat -a | grep 7100 to verify > > > > > > Norm wrote: > > > > > RESENDING BECAUSE I GOT A MESSAGE THAT THE POSTING HAD BEEN DELETED > BECAUSE > > > OF AN ATTACHMENT. > > > > > > Sorry for the delay but I don't get on the 737 very often any more. > > > > > > Anyway, while I was watching it boot today, I noticed that during the > boot > > > process it said that the startup of the Font Server failed. That's > probably > > > why we can't execute 'init 5' to start X Window. Since we can execute > the > > > 'startx' script, everything we need is obviously there, but, I'd guess, > not > > > in the right places. What do I need to do to get the Font Server to > start > > > up during bootup? > > > > > > Thanks > > > Norm > > > > > > THE XF86CONFIG FILE FOLLOWS THIS LINE > > > > > > # File generated by XConfigurator. > > > > > > # ********************************************************************** > > > > > > # Refer to the XF86Config(4/5) man page for details about the format of > > > > > > # this file. > > > > > > # ********************************************************************** > > > > > > # ********************************************************************** > > > > > > # Files section. This allows default font and rgb paths to be set > > > > > > # ********************************************************************** > > > > > > Section "Files" > > > > > > # The location of the RGB database. Note, this is the name of the > > > > > > # file minus the extension (like ".txt" or ".db"). There is normally > > > > > > # no need to change the default. > > > > > > RgbPath "/usr/X11R6/lib/X11/rgb" > > > > > > # Multiple FontPath entries are allowed (they are concatenated together) > > > > > > # By default, Red Hat 6.0 and later now use a font server independent of > > > > > > # the X server to render fonts. > > > > > > FontPath "/usr/X11R6/lib/X11/fonts/TrueType" > > > > > > FontPath "unix/:-1" > > > > > > EndSection > > > > > > # ********************************************************************** > > > > > > # Server flags section. > > > > > > # ********************************************************************** > > > > > > Section "ServerFlags" > > > > > > # Uncomment this to cause a core dump at the spot where a signal is > > > > > > # received. This may leave the console in an unusable state, but may > > > > > > # provide a better stack trace in the core dump to aid in debugging > > > > > > #NoTrapSignals > > > > > > # Uncomment this to disable the <Crtl><Alt><BS> server abort sequence > > > > > > # This allows clients to receive this key event. > > > > > > #DontZap > > > > > > # Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching > > > > > > # sequences. This allows clients to receive these key events. > > > > > > #DontZoom > > > > > > EndSection > > > > > > # ********************************************************************** > > > > > > # Input devices > > > > > > # ********************************************************************** > > > > > > # ********************************************************************** > > > > > > # Keyboard section > > > > > > # ********************************************************************** > > > > > > Section "Keyboard" > > > > > > Protocol "Standard" > > > > > > # when using XQUEUE, comment out the above line, and uncomment the > > > > > > # following line > > > > > > #Protocol "Xqueue" > > > > > > AutoRepeat 500 5 > > > > > > # Let the server do the NumLock processing. This should only be > > > > > > # required when using pre-R6 clients > > > > > > #ServerNumLock > > > > > > # Specify which keyboard LEDs can be user-controlled (eg, with xset(1)) > > > > > > #Xleds 1 2 3 > > > > > > #To set the LeftAlt to Meta, RightAlt key to ModeShift, > > > > > > #RightCtl key to Compose, and ScrollLock key to ModeLock: > > > > > > LeftAlt Meta > > > > > > RightAlt Meta > > > > > > ScrollLock Compose > > > > > > RightCtl Control > > > > > > # To disable the XKEYBOARD extension, uncomment XkbDisable. > > > > > > # XkbDisable > > > > > > # To customise the XKB settings to suit your keyboard, modify the > > > > > > # lines below (which are the defaults). For example, for a non-U.S. > > > > > > # keyboard, you will probably want to use: > > > > > > # XkbModel "pc102" > > > > > > # If you have a US Microsoft Natural keyboard, you can use: > > > > > > # XkbModel "microsoft" > > > > > > # > > > > > > # Then to change the language, change the Layout setting. > > > > > > # For example, a german layout can be obtained with: > > > > > > # XkbLayout "de" > > > > > > # or: > > > > > > # XkbLayout "de" > > > > > > # XkbVariant "nodeadkeys" > > > > > > # > > > > > > # If you'd like to switch the positions of your capslock and > > > > > > # control keys, use: > > > > > > # XkbOptions "ctrl:swapcaps" > > > > > > # These are the default XKB settings for XFree86 > > > > > > # XkbRules "xfree86" > > > > > > # XkbModel "pc101" > > > > > > # XkbLayout "us" > > > > > > # XkbVariant "" > > > > > > # XkbOptions "" > > > > > > XkbKeycodes "xfree86" > > > > > > XkbTypes "default" > > > > > > XkbCompat "default" > > > > > > XkbSymbols "us(pc101)" > > > > > > XkbGeometry "pc" > > > > > > XkbRules "xfree86" > > > > > > XkbModel "pc101" > > > > > > XkbLayout "us" > > > > > > EndSection > > > > > > # ********************************************************************** > > > > > > # Pointer section > > > > > > # ********************************************************************** > > > > > > Section "Pointer" > > > > > > Protocol "PS/2" > > > > > > Device "/dev/mouse" > > > > > > # When using XQUEUE, comment out the above two lines, and uncomment > > > > > > # the following line. > > > > > > # Protocol "Xqueue" > > > > > > # Baudrate and SampleRate are only for some Logitech mice > > > > > > # BaudRate 9600 > > > > > > # SampleRate 150 > > > > > > # Emulate3Buttons is an option for 2-button Microsoft mice > > > > > > # Emulate3Timeout is the timeout in milliseconds (default is 50ms) > > > > > > Emulate3Buttons > > > > > > Emulate3Timeout 50 > > > > > > # ChordMiddle is an option for some 3-button Logitech mice > > > > > > # ChordMiddle > > > > > > EndSection > > > > > > # ********************************************************************** > > > > > > # Monitor section > > > > > > # ********************************************************************** > > > > > > # Any number of monitor sections may be present > > > > > > Section "Monitor" > > > > > > Identifier "My Monitor" > > > > > > VendorName "Unknown" > > > > > > ModelName "Unknown" > > > > > > HorizSync 31.5-64 > > > > > > VertRefresh 50-100 > > > > > > # 800x600 @ 56Hz, 35.15kHz hsync > > > > > > ModeLine "800x600" 36 800 824 896 1024 600 601 603 625 > > > > > > EndSection > > > > > > Section "Monitor" > > > > > > Identifier "Generic Multisync" > > > > > > VendorName "Unknown" > > > > > > ModelName "Unknown" > > > > > > # HorizSync is in kHz unless units are specified. > > > > > > # HorizSync may be a comma separated list of discrete values, or a > > > > > > # comma separated list of ranges of values. > > > > > > # NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S > > > > > > # USER MANUAL FOR THE CORRECT NUMBERS. > > > > > > HorizSync 30-37.9 > > > > > > # VertRefresh is in Hz unless units are specified. > > > > > > # VertRefresh may be a comma separated list of discrete values, or a > > > > > > # comma separated list of ranges of values. > > > > > > # NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S > > > > > > # USER MANUAL FOR THE CORRECT NUMBERS. > > > > > > VertRefresh 50-100 > > > > > > # Modes can be specified in two formats. A compact one-line format, or > > > > > > # a multi-line format. > > > > > > # These two are equivalent > > > > > > # ModeLine "1024x768i" 45 1024 1048 1208 1264 768 776 784 817 Interlace > > > > > > # Mode "1024x768i" > > > > > > # DotClock 45 > > > > > > # HTimings 1024 1048 1208 1264 > > > > > > # VTimings 768 776 784 817 > > > > > > # Flags "Interlace" > > > > > > # EndMode > > > > > > # This is a set of standard mode timings. Modes that are out of monitor > spec > > > > > > # are automatically deleted by the server (provided the HorizSync and > > > > > > # VertRefresh lines are correct), so there's no immediate need to > > > > > > # delete mode timings (unless particular mode timings don't work on your > > > > > > # monitor). With these modes, the best standard mode that your monitor > > > > > > # and video card can support for a given resolution is automatically > > > > > > # used. > > > > > > # 640x400 @ 70 Hz, 31.5 kHz hsync > > > > > > Modeline "640x400" 25.175 640 664 760 800 400 409 411 450 > > > > > > # 640x480 @ 60 Hz, 31.5 kHz hsync > > > > > > Modeline "640x480" 25.175 640 664 760 800 480 491 493 525 > > > > > > # 800x600 @ 56 Hz, 35.15 kHz hsync > > > > > > ModeLine "800x600" 36 800 824 896 1024 600 601 603 625 > > > > > > # 1024x768 @ 87 Hz interlaced, 35.5 kHz hsync > > > > > > Modeline "1024x768" 44.9 1024 1048 1208 1264 768 776 784 817 Interlace > > > > > > # 640x400 @ 85 Hz, 37.86 kHz hsync > > > > > > Modeline "640x400" 31.5 640 672 736 832 400 401 404 445 -HSync +VSync > > > > > > # 640x480 @ 72 Hz, 36.5 kHz hsync > > > > > > Modeline "640x480" 31.5 640 680 720 864 480 488 491 521 > > > > > > # 640x480 @ 75 Hz, 37.50 kHz hsync > > > > > > ModeLine "640x480" 31.5 640 656 720 840 480 481 484 500 -HSync -VSync > > > > > > # 800x600 @ 60 Hz, 37.8 kHz hsync > > > > > > Modeline "800x600" 40 800 840 968 1056 600 601 605 628 +hsync +vsync > > > > > > # 640x480 @ 85 Hz, 43.27 kHz hsync > > > > > > Modeline "640x480" 36 640 696 752 832 480 481 484 509 -HSync -VSync > > > > > > # 1152x864 @ 89 Hz interlaced, 44 kHz hsync > > > > > > ModeLine "1152x864" 65 1152 1168 1384 1480 864 865 875 985 Interlace > > > > > > # 800x600 @ 72 Hz, 48.0 kHz hsync > > > > > > Modeline "800x600" 50 800 856 976 1040 600 637 643 666 +hsync +vsync > > > > > > # 1024x768 @ 60 Hz, 48.4 kHz hsync > > > > > > Modeline "1024x768" 65 1024 1032 1176 1344 768 771 777 806 -hsync -vsync > > > > > > # 640x480 @ 100 Hz, 53.01 kHz hsync > > > > > > Modeline "640x480" 45.8 640 672 768 864 480 488 494 530 -HSync -VSync > > > > > > # 1152x864 @ 60 Hz, 53.5 kHz hsync > > > > > > Modeline "1152x864" 89.9 1152 1216 1472 1680 864 868 876 > 892 -HSync -VSync > > > > > > # 800x600 @ 85 Hz, 55.84 kHz hsync > > > > > > Modeline "800x600" 60.75 800 864 928 1088 600 616 621 657 -HSync -VSync > > > > > > # 1024x768 @ 70 Hz, 56.5 kHz hsync > > > > > > Modeline "1024x768" 75 1024 1048 1184 1328 768 771 777 806 -hsync -vsync > > > > > > # 1280x1024 @ 87 Hz interlaced, 51 kHz hsync > > > > > > Modeline "1280x1024" 80 1280 1296 1512 1568 1024 1025 1037 1165 > Interlace > > > > > > # 800x600 @ 100 Hz, 64.02 kHz hsync > > > > > > Modeline "800x600" 69.65 800 864 928 1088 600 604 610 640 -HSync -VSync > > > > > > # 1024x768 @ 76 Hz, 62.5 kHz hsync > > > > > > Modeline "1024x768" 85 1024 1032 1152 1360 768 784 787 823 > > > > > > # 1152x864 @ 70 Hz, 62.4 kHz hsync > > > > > > Modeline "1152x864" 92 1152 1208 1368 1474 864 865 875 895 > > > > > > # 1280x1024 @ 61 Hz, 64.2 kHz hsync > > > > > > Modeline "1280x1024" 110 1280 1328 1512 1712 1024 1025 1028 1054 > > > > > > # 1024x768 @ 85 Hz, 70.24 kHz hsync > > > > > > Modeline "1024x768" 98.9 1024 1056 1216 1408 768 782 788 > 822 -HSync -VSync > > > > > > # 1152x864 @ 78 Hz, 70.8 kHz hsync > > > > > > Modeline "1152x864" 110 1152 1240 1324 1552 864 864 876 908 > > > > > > # 1280x1024 @ 70 Hz, 74.59 kHz hsync > > > > > > Modeline "1280x1024" 126.5 1280 1312 1472 1696 1024 1032 1040 > > > 1068 -HSync -VSync > > > > > > # 1600x1200 @ 60Hz, 75.00 kHz hsync > > > > > > Modeline "1600x1200" 162 1600 1664 1856 2160 1200 1201 1204 1250 +HSync > > > +VSync > > > > > > # 1152x864 @ 84 Hz, 76.0 kHz hsync > > > > > > Modeline "1152x864" 135 1152 1464 1592 1776 864 864 876 908 > > > > > > # 1280x1024 @ 74 Hz, 78.85 kHz hsync > > > > > > Modeline "1280x1024" 135 1280 1312 1456 1712 1024 1027 1030 1064 > > > > > > # 1024x768 @ 100Hz, 80.21 kHz hsync > > > > > > Modeline "1024x768" 115.5 1024 1056 1248 1440 768 771 781 > 802 -HSync -VSync > > > > > > # 1280x1024 @ 76 Hz, 81.13 kHz hsync > > > > > > Modeline "1280x1024" 135 1280 1312 1416 1664 1024 1027 1030 1064 > > > > > > # 1600x1200 @ 70 Hz, 87.50 kHz hsync > > > > > > Modeline "1600x1200" 189 1600 1664 1856 2160 1200 1201 1204 > > > 1250 -HSync -VSync > > > > > > # 1152x864 @ 100 Hz, 89.62 kHz hsync > > > > > > Modeline "1152x864" 137.65 1152 1184 1312 1536 864 866 885 > 902 -HSync -VSync > > > > > > # 1280x1024 @ 85 Hz, 91.15 kHz hsync > > > > > > Modeline "1280x1024" 157.5 1280 1344 1504 1728 1024 1025 1028 1072 > +HSync > > > +VSync > > > > > > # 1600x1200 @ 75 Hz, 93.75 kHz hsync > > > > > > Modeline "1600x1200" 202.5 1600 1664 1856 2160 1200 1201 1204 1250 > +HSync > > > +VSync > > > > > > # 1600x1200 @ 85 Hz, 105.77 kHz hsync > > > > > > Modeline "1600x1200" 220 1600 1616 1808 2080 1200 1204 1207 1244 +HSync > > > +VSync > > > > > > # 1280x1024 @ 100 Hz, 107.16 kHz hsync > > > > > > Modeline "1280x1024" 181.75 1280 1312 1440 1696 1024 1031 1046 > > > 1072 -HSync -VSync > > > > > > # 1800x1440 @ 64Hz, 96.15 kHz hsync > > > > > > ModeLine "1800X1440" 230 1800 1896 2088 2392 1440 1441 1444 1490 +HSync > > > +VSync > > > > > > # 1800x1440 @ 70Hz, 104.52 kHz hsync > > > > > > ModeLine "1800X1440" 250 1800 1896 2088 2392 1440 1441 1444 1490 +HSync > > > +VSync > > > > > > # 512x384 @ 78 Hz, 31.50 kHz hsync > > > > > > Modeline "512x384" 20.160 512 528 592 640 384 385 388 404 -HSync -VSync > > > > > > # 512x384 @ 85 Hz, 34.38 kHz hsync > > > > > > Modeline "512x384" 22 512 528 592 640 384 385 388 404 -HSync -VSync > > > > > > # Low-res Doublescan modes > > > > > > # If your chipset does not support doublescan, you get a 'squashed' > > > > > > # resolution like 320x400. > > > > > > # 320x200 @ 70 Hz, 31.5 kHz hsync, 8:5 aspect ratio > > > > > > Modeline "320x200" 12.588 320 336 384 400 200 204 205 225 Doublescan > > > > > > # 320x240 @ 60 Hz, 31.5 kHz hsync, 4:3 aspect ratio > > > > > > Modeline "320x240" 12.588 320 336 384 400 240 245 246 262 Doublescan > > > > > > # 320x240 @ 72 Hz, 36.5 kHz hsync > > > > > > Modeline "320x240" 15.750 320 336 384 400 240 244 246 262 Doublescan > > > > > > # 400x300 @ 56 Hz, 35.2 kHz hsync, 4:3 aspect ratio > > > > > > ModeLine "400x300" 18 400 416 448 512 300 301 302 312 Doublescan > > > > > > # 400x300 @ 60 Hz, 37.8 kHz hsync > > > > > > Modeline "400x300" 20 400 416 480 528 300 301 303 314 Doublescan > > > > > > # 400x300 @ 72 Hz, 48.0 kHz hsync > > > > > > Modeline "400x300" 25 400 424 488 520 300 319 322 333 Doublescan > > > > > > # 480x300 @ 56 Hz, 35.2 kHz hsync, 8:5 aspect ratio > > > > > > ModeLine "480x300" 21.656 480 496 536 616 300 301 302 312 Doublescan > > > > > > # 480x300 @ 60 Hz, 37.8 kHz hsync > > > > > > Modeline "480x300" 23.890 480 496 576 632 300 301 303 314 Doublescan > > > > > > # 480x300 @ 63 Hz, 39.6 kHz hsync > > > > > > Modeline "480x300" 25 480 496 576 632 300 301 303 314 Doublescan > > > > > > # 480x300 @ 72 Hz, 48.0 kHz hsync > > > > > > Modeline "480x300" 29.952 480 504 584 624 300 319 322 333 Doublescan > > > > > > EndSection > > > > > > # ********************************************************************** > > > > > > # Graphics device section > > > > > > # ********************************************************************** > > > > > > # Any number of graphics device sections may be present > > > > > > Section "Device" > > > > > > Identifier "Generic VGA" > > > > > > VendorName "Unknown" > > > > > > BoardName "Unknown" > > > > > > Chipset "generic" > > > > > > # VideoRam 256 > > > > > > # Clocks 25.2 28.3 > > > > > > EndSection > > > > > > # Device configured by Xconfigurator: > > > > > > Section "Device" > > > > > > Identifier "Intel Corporation|82810E CGC [Chipset Graphics Controller]" > > > > > > VendorName "Unknown" > > > > > > BoardName "Unknown" > > > > > > #VideoRam 1024 > > > > > > Clockchip "s3gendac" > > > > > > EndSection > > > > > > # ********************************************************************** > > > > > > # Screen sections > > > > > > # ********************************************************************** > > > > > > # The Colour SVGA server > > > > > > Section "Screen" > > > > > > Driver "svga" > > > > > > # Use Device "Generic VGA" for Standard VGA 320x200x256 > > > > > > #Device "Generic VGA" > > > > > > Device "Intel Corporation|82810E CGC [Chipset Graphics Controller]" > > > > > > # Monitor "Generic Multisync" > > > > > > Monitor "My Monitor" > > > > > > # Subsection "Display" > > > > > > # Depth 8 > > > > > > # # Omit the Modes line for the "Generic VGA" device > > > > > > # Modes "800x600" > > > > > > # ViewPort 0 0 > > > > > > # EndSubsection > > > > > > Subsection "Display" > > > > > > # Depth 16 > > > > > > Depth 24 > > > > > > Modes "800x600" > > > > > > ViewPort 0 0 > > > > > > EndSubsection > > > > > > EndSection > > > > > > # The 16-color VGA server > > > > > > #Section "Screen" > > > > > > # Driver "vga16" > > > > > > # Device "Generic VGA" > > > > > > # Monitor "Generic Multisync" > > > > > > # Subsection "Display" > > > > > > # Modes "640x480" "800x600" > > > > > > # ViewPort 0 0 > > > > > > # EndSubsection > > > > > > #EndSection > > > > > > # The Mono server > > > > > > #Section "Screen" > > > > > > # Driver "vga2" > > > > > > # Device "Generic VGA" > > > > > > # Monitor "Generic Multisync" > > > > > > # Subsection "Display" > > > > > > # Modes "640x480" "800x600" > > > > > > # ViewPort 0 0 > > > > > > # EndSubsection > > > > > > #EndSection > > > > > > # The accelerated servers (S3, Mach32, Mach8, 8514, P9000, AGX, W32, > Mach64 > > > > > > # I128, and S3V) > > > > > > #Section "Screen" > > > > > > # Driver "accel" > > > > > > # Device "Intel Corporation|82810E CGC [Chipset Graphics Controller]" > > > > > > # Monitor "Generic Multisync" > > > > > > # Subsection "Display" > > > > > > # Depth 8 > > > > > > # Modes "800x600" > > > > > > # ViewPort 0 0 > > > > > > # EndSubsection > > > > > > # Subsection "Display" > > > > > > # Depth 16 > > > > > > # Modes "800x600" > > > > > > # ViewPort 0 0 > > > > > > # EndSubsection > > > > > > #EndSection > > > > > > ----- Original Message ----- > > > From: "Norm" <ndrez@xxxxxxx> > > > To: <xfree86@xxxxxxxxxxx> > > > Sent: Wednesday, March 09, 2005 12:54 PM > > > Subject: Re: Partially successful installation/startup > > > > > > > Sorry for the delay but I don't get on the 737 very often any more. > > > > > > > > Anyway, while I was watching it boot today, I noticed that during the > boot > > > > process it said that the startup of the Font Server failed. That's > > > probably > > > > why we can't execute 'init 5' to start X Window. Since we can execute > the > > > > 'startx' script, everything we need is obviously there, but, I'd > guess, > > > not > > > > in the right places. What do I need to do to get the Font Server to > start > > > > up during bootup? > > > > > > > > Thanks > > > > Norm > > > > > > > > ----- Original Message ----- > > > > From: "Bukie Mabayoje" <bukiemab@xxxxxxx> > > > > To: <xfree86@xxxxxxxxxxx> > > > > Sent: Thursday, February 17, 2005 11:59 AM > > > > Subject: Re: Partially successful installation/startup > > > > > > > > > > > > > Post your configuration file. > > > > > > > > > > Norm wrote: > > > > > > > > > > > The basic setup is a Pentium-III Linux system that started with > RedHat > > > > 6.2 > > > > > > patched with the FSM Labs GPL-version of Real-Time Linux installed > > > from > > > > the > > > > > > FSM-labs installation CD-ROM. We've used it many times on several > > > > diverse > > > > > > systems, both desktop PCs and Single Board Computer (SBC)-based > > > > rackmount > > > > > > boxes with essentially no problems at all. On this particular box > we > > > > had > > > > > > installed the system and had it running fine, then changed the > SBC. > > > Of > > > > > > course, the VGA chipset changed as well so we had to install the > > > > > > SBC-manufacturer's VGA driver and use Xconfigurator to modify the > old > > > > > > configuration to the new system. > > > > > > > > > > > > The result is that we can successfully start the system into > run-state > > > 3 > > > > > > (text mode) and then login and issue a `startx` command from a > text > > > > console > > > > > > to get the X-Window system running just fine. When we do, the > output > > > on > > > > the > > > > > > text console is > > > > > > > > > > > > insmod: a module named agpgart already exists > > > > > > > > > > > > XFCom_i810 Version 3.3.6 / X Window System > > > > > > > > > > > > (protocol Version 11, revision 0, vendor release 6300) > > > > > > > > > > > > Release Date: May 19 2000 > > > > > > > > > > > > If the server is older than 6-12 months, or if your card is newer > > > > > > > > > > > > than the above date, look for a newer version before reporting > > > > > > > > > > > > problems. (see > > > > > > > http://support.intel.com/support/graphics/intel810/linuxsoftware.htm) > > > > > > > > > > > > Operating System: Linux 2.2.14-5.0 i686 [ELF] > > > > > > > > > > > > Configured drivers: > > > > > > > > > > > > SVGA: server for SVGA graphics adaptors (Patchlevel 0): > > > > > > > > > > > > i810, i810-dc100, i810e, i815, generic > > > > > > > > > > > > (using VT number 7) > > > > > > > > > > > > XF86Config: /usr/X11R6/lib/X11/XF86Config > > > > > > > > > > > > (**) stands for supplied, (--) stands for probed/default values > > > > > > > > > > > > (**) XKB: keycodes: "xfree86" > > > > > > > > > > > > (**) XKB: types: "default" > > > > > > > > > > > > (**) XKB: compat: "default" > > > > > > > > > > > > (**) XKB: symbols: "us(pc101)" > > > > > > > > > > > > (**) XKB: geometry: "pc" > > > > > > > > > > > > (**) XKB: rules: "xfree86" > > > > > > > > > > > > (**) XKB: model: "pc101" > > > > > > > > > > > > (**) XKB: layout: "us" > > > > > > > > > > > > (**) Mouse: type: PS/2, device: /dev/mouse, buttons: 3 > > > > > > > > > > > > (**) Mouse: 3 button emulation (timeout: 50ms) > > > > > > > > > > > > (**) SVGA: Graphics device ID: "Intel Corporation|82810E CGC > [Chipset > > > > > > Graphics Controller]" > > > > > > > > > > > > (**) SVGA: Monitor ID: "My Monitor" > > > > > > > > > > > > Warning: The directory "/usr/X11R6/lib/X11/fonts/TrueType" does > not > > > > exist. > > > > > > > > > > > > Entry deleted from font path. > > > > > > > > > > > > (**) FontPath set to "unix/:-1" > > > > > > > > > > > > (--) SVGA: PCI: Intel Unknown chipset (0x7125) rev 3, Memory @ > > > > 0xe8000000, > > > > > > 0xeff80000 > > > > > > > > > > > > (--) SVGA: GART: allocated 4096K system ram > > > > > > > > > > > > (--) SVGA: chipset: i810e > > > > > > > > > > > > (--) SVGA: videoram: 4096k > > > > > > > > > > > > (**) SVGA: Option "dac_8_bit" > > > > > > > > > > > > (**) SVGA: Using 24 bpp, Depth 24, Color weight: 888 > > > > > > > > > > > > (--) SVGA: Maximum allowed dot-clock: 128.000 MHz > > > > > > > > > > > > (**) SVGA: Mode "800x600": mode clock = 36.000 > > > > > > > > > > > > (--) SVGA: i810e: Display width padded to 2496 bytes (832 pixels). > > > > > > > > > > > > (--) SVGA: Virtual resolution set to 800x600 > > > > > > > > > > > > (--) SVGA: SpeedUp code selection modified because virtualX != > 1024 > > > > > > > > > > > > (--) SVGA: Intel i810e > > > > > > > > > > > > (--) SVGA: i810e: MMIO registers at 0xEFF80000 > > > > > > > > > > > > (--) SVGA: i810e: Linear framebuffer at 0xE8000000 > > > > > > > > > > > > (--) SVGA: i810e: Using hardware cursor > > > > > > > > > > > > (--) SVGA: Setting dot clock to 36.0 MHz [ 0x10 0x1 0x40 ] [ 18 3 > 4 ] > > > > > > > > > > > > (--) SVGA: chose watermark 0x22008000: (tab.freq 40.0) > > > > > > > > > > > > (--) SVGA: Using XAA (XFree86 Acceleration Architecture) > > > > > > > > > > > > (--) SVGA: XAA: Solid filled rectangles > > > > > > > > > > > > (--) SVGA: XAA: Screen-to-screen copy > > > > > > > > > > > > (--) SVGA: XAA: 8x8 color expand pattern fill > > > > > > > > > > > > (--) SVGA: XAA: Indirect CPU to screen color expansion (imagetext, > > > > polytext) > > > > > > > > > > > > (--) SVGA: XAA: Using 6 128x85 areas for pixmap caching > > > > > > > > > > > > (--) SVGA: XAA: Caching tiles > > > > > > > > > > > > (--) SVGA: XAA: Horizontal and vertical lines and segments > > > > > > > > > > > > SESSION_MANAGER=local/sac:/tmp/.ICE-unix/879,tcp/sac:1037 > > > > > > > > > > > > SetKbdSettings - type: 0 rate: 19 delay: 263 snumlk: 0 > > > > > > > > > > > > SetKbdSettings - Succeeded > > > > > > > > > > > > AUDIT: Wed Feb 16 08:40:26 2005: 876 X: client 10 rejected from > local > > > > host > > > > > > > > > > > > Xlib: connection to ":0.0" refused by server > > > > > > > > > > > > Xlib: Client is not authorized to connect to Server > > > > > > > > > > > > xscreensaver: Can't open display: :0 > > > > > > > > > > > > xscreensaver: initial effective uid/gid was root/root (0/0) > > > > > > > > > > > > xscreensaver: running as nobody/nobody (99/99) > > > > > > > > > > > > xscreensaver: Errors at startup are usually authorization > problems. > > > > > > > > > > > > Did you read the manual and the FAQ? Specifically, > > > > > > > > > > > > the parts of the manual that talk about XAUTH, XDM, > > > > > > > > > > > > and root logins? > > > > > > > > > > > > http://www.jwz.org/xscreensaver/man.html > > > > > > > > > > > > subshell.c: couldn't get terminal settings: Inappropriate ioctl > for > > > > device > > > > > > > > > > > > X connection to :0.0 broken (explicit kill or server shutdown). > > > > > > > > > > > > Gdk-ERROR **: X connection to :0.0 broken (explicit kill or server > > > > > > shutdown). > > > > > > > > > > > > X connection to :0.0 broken (explicit kill or server shutdown). > > > > > > > > > > > > X connection to :0.0 broken (explicit kill or server shutdown). > > > > > > > > > > > > Gdk-ERROR **: X connection to :0.0 broken (explicit kill or server > > > > > > shutdown). > > > > > > > > > > > > Gdk-WARNING **: GdkWindow 0x3800005 unexpectedly destroyed > > > > > > > > > > > > Gdk-ERROR **: X connection to :0.0 broken (explicit kill or server > > > > > > shutdown). > > > > > > > > > > > > Gdk-ERROR **: X connection to :0.0 broken (explicit kill or server > > > > > > shutdown). > > > > > > > > > > > > Gdk-ERROR **: X connection to :0.0 broken (explicit kill or server > > > > > > shutdown). > > > > > > > > > > > > xinit: connection to X server lost. > > > > > > > > > > > > waiting for X server to shut down > > > > > > > > > > > > All of this works just fine. BUT ... if we try to start the > X-Window > > > > system > > > > > > with the command `init 5` the system starts an infinite cycling of > > > > trying > > > > > > and failing to start properly and we have to cycle power on the > system > > > > (we > > > > > > have no working hardware reset implementation) to recover control. > > > > During > > > > > > this time I can't get anything saved from the text shell but after > > > > reboot > > > > > > the .xsession-errors file contains > > > > > > > > > > > > /etc/X11/xdm/Xsession: [: too many arguments > > > > > > > > > > > > SESSION_MANAGER=local/sac:/tmp/.ICE-unix/670,tcp/sac:1024 > > > > > > > > > > > > subshell.c: couldn't get terminal settings: Inappropriate ioctl > for > > > > device > > > > > > > > > > > > Gdk-WARNING **: GdkWindow 0x3c00005 unexpectedly destroyed > > > > > > > > > > > > Gdk-WARNING **: GdkWindow 0x400017c unexpectedly destroyed > > > > > > > > > > > > Gdk-WARNING **: GdkWindow 0x400017b unexpectedly destroyed > > > > > > > > > > > > Gdk-WARNING **: GdkWindow 0x400017a unexpectedly destroyed > > > > > > > > > > > > Gdk-WARNING **: GdkWindow 0x4000038 unexpectedly destroyed > > > > > > > > > > > > Gdk-WARNING **: GdkWindow 0x4000037 unexpectedly destroyed > > > > > > > > > > > > Gdk-WARNING **: GdkWindow 0x4000036 unexpectedly destroyed > > > > > > > > > > > > Gdk-WARNING **: GdkWindow 0x4000030 unexpectedly destroyed > > > > > > > > > > > > ... > > > > > > > > > > > > Any hints, suggestions, requests for more information, and > > > expressions > > > > of > > > > > > sincere sympathy graciously accepted. > > > > > > > > > > > > Thanks > > > > > > > > > > > > Norman Dresner > > > > > > Fellow Support Avionics Systems Engineer & (SGI) Advanced Signal > > > > Processing > > > > > > Laboratory Administrator > > > > > > Radar Systems Engineering Department > > > > > > Northrop Grumman Corporation > > > > > > Electronic Systems > > > > > > Baltimore-Washington International Airport > > > > > > 7323 Aviation Boulevard > > > > > > Baltimore Maryland 21240 > > > > > > > > > > > > E-Mail: Mornings: NDresner@xxxxxxxxxxxxxxxxxxx > > > > > > Afternoons: ndrez@xxxxxxx > > > > > > > > > > > > _______________________________________________ > > > > > > XFree86 mailing list > > > > > > XFree86@xxxxxxxxxxx > > > > > > http://XFree86.Org/mailman/listinfo/xfree86 > > > > > _______________________________________________ > > > > > XFree86 mailing list > > > > > XFree86@xxxxxxxxxxx > > > > > http://XFree86.Org/mailman/listinfo/xfree86 > > > > > > > > > > _______________________________________________ > > > XFree86 mailing list > > > XFree86@xxxxxxxxxxx > > > http://XFree86.Org/mailman/listinfo/xfree86 > > _______________________________________________ > > XFree86 mailing list > > XFree86@xxxxxxxxxxx > > http://XFree86.Org/mailman/listinfo/xfree86 > > _______________________________________________ > XFree86 mailing list > XFree86@xxxxxxxxxxx > http://XFree86.Org/mailman/listinfo/xfree86 _______________________________________________ XFree86 mailing list XFree86@xxxxxxxxxxx http://XFree86.Org/mailman/listinfo/xfree86
