(protocol Version 11, revision 0, vendor release 6510)
Release Date: 2 June 2001
If the server is older than 6-12 months, or if your card is
newer than the above date, look for a newer version before
reporting problems. (See http://www.XFree86.Org/FAQ)
Build Operating System: Linux 2.4.17-0.13smp i686 [ELF]
Build Host: daffy.perf.redhat.com
(==) Log file: "/var/log/XFree86.0.log", Time: Wed Jan 2 20:00:54 2002
(==) Using config file: "/root/XF86Config"
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) ServerLayout "Anaconda Configured"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "AOCa781"
(**) | |-->Device "Intel-865"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(**) XKB: rules: "xfree86"
(**) XKB: model: "pc105"
(**) XKB: layout: "us"
(**) FontPath set to "unix/:7100"
(**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(==) ModulePath set to "/usr/X11R6/lib/modules"
(--) using VT number 7
(II) Module bitmap: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 0.1.0
(II) Loading /usr/X11R6/lib/modules/libscanpci.a
(II) Module scanpci: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 0.1.0
(II) Unloading /usr/X11R6/lib/modules/libscanpci.a
(--) PCI:*(0:2:0) Intel unknown chipset (0x2572) rev 2, Mem @ 0xf0000000/27, 0xfe780000/19, I/O @ 0xeff0/3
(II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a
(II) Module GLcore: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/linux/libfbdevhw.a
(II) Module fbdevhw: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 0.0.2
(II) Loading /usr/X11R6/lib/modules/extensions/libpex5.a
(II) Module pex5: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/extensions/libdri.a
(II) Module dri: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/linux/libdrm.a
(II) Module drm: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/extensions/libglx.a
(II) Module glx: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/extensions/librecord.a
(II) Module record: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.13.0
(II) Loading /usr/X11R6/lib/modules/extensions/libxie.a
(II) Module xie: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/drivers/vga_drv.o
(II) Module vga: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 4.0.0
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
(II) VGA: Generic VGA driver (version 4.0) for chipsets: generic
(--) Assigning device section with no busID to primary device
(--) Chipset generic found
(**) VGA(0): Depth 16, (--) framebuffer bpp 16
(==) VGA(0): RGB weight 565
(==) VGA(0): Default visual is TrueColor
(==) VGA(0): Using gamma correction (1.0, 1.0, 1.0)
(==) VGA(0): videoRam: 256 kBytes.
(II) Loading /usr/X11R6/lib/modules/libvgahw.a
(II) Module vgahw: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 0.1.0
(--) VGA(0): Pixel clocks available:
(--) VGA(0): pixel clocks: 25.160 28.322 25.260 28.440
(II) VGA(0): AOCa781: Using hsync range of 30.00-83.00 kHz
(II) VGA(0): AOCa781: Using vrefresh range of 55.00-75.00 Hz
(II) VGA(0): Not using mode "400x300" (vrefresh out of range)
(II) VGA(0): Not using mode "400x300" (vrefresh out of range)
(II) VGA(0): Not using mode "480x300" (insufficient memory for mode)
(II) VGA(0): Not using mode "480x300" (insufficient memory for mode)
(II) VGA(0): Not using mode "480x300" (insufficient memory for mode)
(II) VGA(0): Not using mode "480x300" (insufficient memory for mode)
(II) VGA(0): Not using mode "512x384" (insufficient memory for mode)
(II) VGA(0): Not using mode "512x384" (insufficient memory for mode)
(II) VGA(0): Not using mode "640x400" (insufficient memory for mode)
(II) VGA(0): Not using mode "640x400" (insufficient memory for mode)
(II) VGA(0): Not using mode "640x480" (insufficient memory for mode)
(II) VGA(0): Not using mode "640x480" (insufficient memory for mode)
(II) VGA(0): Not using mode "640x480" (insufficient memory for mode)
(II) VGA(0): Not using mode "640x480" (insufficient memory for mode)
(II) VGA(0): Not using mode "640x480" (insufficient memory for mode)
(II) VGA(0): Not using mode "800x600" (insufficient memory for mode)
(II) VGA(0): Not using mode "800x600" (insufficient memory for mode)
(II) VGA(0): Not using mode "800x600" (insufficient memory for mode)
(II) VGA(0): Not using mode "800x600" (insufficient memory for mode)
(II) VGA(0): Not using mode "800x600" (insufficient memory for mode)
(II) VGA(0): Not using mode "1024x768" (insufficient memory for mode)
(II) VGA(0): Not using mode "1024x768" (insufficient memory for mode)
(II) VGA(0): Not using mode "1024x768" (insufficient memory for mode)
(II) VGA(0): Not using mode "1024x768" (insufficient memory for mode)
(II) VGA(0): Not using mode "1024x768" (insufficient memory for mode)
(II) VGA(0): Not using mode "1152x864" (insufficient memory for mode)
(II) VGA(0): Not using mode "1152x864" (insufficient memory for mode)
(II) VGA(0): Not using mode "1152x864" (insufficient memory for mode)
(II) VGA(0): Not using mode "1152x864" (insufficient memory for mode)
(II) VGA(0): Not using mode "1152x864" (insufficient memory for mode)
(II) VGA(0): Not using mode "1280x1024" (insufficient memory for mode)
(II) VGA(0): Not using mode "1280x1024" (insufficient memory for mode)
(II) VGA(0): Not using mode "1280x1024" (insufficient memory for mode)
(II) VGA(0): Not using mode "1280x1024" (insufficient memory for mode)
(II) VGA(0): Not using mode "1280x1024" (insufficient memory for mode)
(II) VGA(0): Not using mode "1280x1024" (insufficient memory for mode)
(II) VGA(0): Not using mode "1400x1050" (insufficient memory for mode)
(II) VGA(0): Not using mode "1400x1050" (insufficient memory for mode)
(II) VGA(0): Not using mode "1400x1050" (insufficient memory for mode)
(II) VGA(0): Not using mode "1400x1050" (insufficient memory for mode)
(II) VGA(0): Not using mode "1600x1200" (insufficient memory for mode)
(II) VGA(0): Not using mode "1600x1200" (insufficient memory for mode)
(II) VGA(0): Not using mode "1600x1200" (insufficient memory for mode)
(II) VGA(0): Not using mode "1600x1200" (insufficient memory for mode)
(II) VGA(0): Not using mode "1800X1440" (insufficient memory for mode)
(II) VGA(0): Not using mode "1800X1440" (insufficient memory for mode)
(II) VGA(0): Not using mode "1920x1200" (insufficient memory for mode)
(II) VGA(0): Not using default mode "640x350" (insufficient memory for mode)
(II) VGA(0): Not using default mode "720x400" (insufficient memory for mode)
(II) VGA(0): Not using default mode "1280x960" (insufficient memory for mode)
(II) VGA(0): Not using default mode "1280x960" (insufficient memory for mode)
(II) VGA(0): Not using default mode "1792x1344" (insufficient memory for mode)
(II) VGA(0): Not using default mode "1792x1344" (insufficient memory for mode)
(II) VGA(0): Not using default mode "1856x1392" (insufficient memory for mode)
(II) VGA(0): Not using default mode "1856x1392" (insufficient memory for mode)
(II) VGA(0): Not using default mode "1920x1440" (insufficient memory for mode)
(II) VGA(0): Not using default mode "1920x1440" (insufficient memory for mode)
(II) VGA(0): Not using mode "800x600" (no mode of this name)
(--) VGA(0): Virtual size is 400x300 (pitch 400)
(**) VGA(0): Mode "400x300": 25.2 MHz, 48.4 kHz, 72.6 Hz (D)
(==) VGA(0): DPI set to (75, 75)
(II) Loading /usr/X11R6/lib/modules/libfb.a
(II) Module fb: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
AddScreen/ScreenInit failed for driver 0
When reporting a problem related to a server crash, please send
the full server output, not just the last messages.
This can be found in the log file "/var/log/XFree86.0.log".
Please report problems to xfree86@xxxxxxxxxxx.
after 0 requests (0 known processed) with 0 events remaining.
De: xfree86-admin@xxxxxxxxxxx [mailto:xfree86-admin@xxxxxxxxxxx] En nombre de Bukie Mabayoje
Enviado el: Miércoles, 09 de Febrero de 2005 21:37
Para: xfree86@xxxxxxxxxxx
Asunto: Re: Xfree configuration problem
# File generated by xf86config.
#
# Copyright (c) 1999 by The XFree86 Project, Inc.
#
#
Permission is hereby granted, free of charge, to any person obtaining a
#
copy of this software and associated documentation files (the "Software"),
#
to deal in the Software without restriction, including without limitation
#
the rights to use, copy, modify, merge, publish, distribute, sublicense,
#
and/or sell copies of the Software, and to permit persons to whom the
#
Software is furnished to do so, subject to the following conditions:
#
#
The above copyright notice and this permission notice shall be included in
#
all copies or substantial portions of the Software.
#
# THE SOFTWARE IS
PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED,
INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS
FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
# THE
XFREE86 PROJECT BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
#
WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
#
OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
#
SOFTWARE.
#
# Except as contained in this notice, the name of the
XFree86 Project shall
# not be used in advertising or otherwise to promote
the sale, use or other
# dealings in this Software without prior written
authorization from the
# XFree86 Project.
#
# **********************************************************************
# Refer to the XF86Config(4/5) man page for details about the format of
# this file.
#
**********************************************************************
# **********************************************************************
# Module section -- this section is used to specify
# which
dynamically loadable modules to load.
#
**********************************************************************
#
Section "Module"
# This loads the DBE extension module.
Load "dbe" # Double buffer extension
# This loads the miscellaneous extensions module, and disables
#
initialisation of the XFree86-DGA extension within that module.
SubSection "extmod"
Option "omit
xfree86-dga" # don't initialise the DGA extension
EndSubSection
# This loads the Type1 and FreeType font modules
Load "type1"
Load "freetype"
# This loads the GLX module
#
Load "glx"
EndSection
# **********************************************************************
# Files section. This allows default font and rgb paths to be set
# **********************************************************************
Section "Files"
# The location of the RGB database. Note, this is the name of the
#
file minus the extension (like ".txt" or ".db"). There is normally
#
no need to change the default.
RgbPath "/usr/X11R6/lib/X11/rgb"
# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
#
# If you don't have a
floating point coprocessor and emacs, Mosaic or other
# programs take long
to start up, try moving the Type1 and Speedo directory
# to the end of this
list (or comment them out).
#
# FontPath "/usr/X11R6/lib/X11/fonts/local/"
FontPath "/usr/X11R6/lib/X11/fonts/misc/"
FontPath
"/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/Type1/"
FontPath "/usr/X11R6/lib/X11/fonts/Speedo/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/"
# BUKIE1: You may run into problems here. If you don't
have all the fonts.
# Note: I don't run xfs that
is why you didn't see FontPath "unix/:7100"
# It
is required for Red hat
# The module search path. The default path is shown here.
# ModulePath "/usr/X11R6/lib/modules"
EndSection
# **********************************************************************
# Server flags section.
#
**********************************************************************
Section "ServerFlags"
# Uncomment this to cause a core dump at the spot where a signal is
#
received. This may leave the console in an unusable state, but may
#
provide a better stack trace in the core dump to aid in debugging
# Option "NoTrapSignals"
# Uncomment this to disable the <Crtl><Alt><BS> server
abort sequence
# This allows clients to receive this key event.
# Option "DontZap"
# Uncomment this to disable the
<Crtl><Alt><KP_+>/<KP_-> mode switching
#
sequences. This allows clients to receive these key events.
# Option "Dont Zoom"
# Uncomment this to disable tuning with the xvidtune client. With
# it
the client can still run and fetch card and monitor attributes,
# but it
will not be allowed to change them. If it tries it will
# receive a protocol
error.
# Option "DisableVidModeExtension"
# Uncomment this to enable the use of a non-local xvidtune client.
# Option "AllowNonLocalXvidtune"
# Uncomment this to disable dynamically modifying the input device
#
(mouse and keyboard) settings.
# Option "DisableModInDev"
# Uncomment this to enable the use of a non-local client to
# change the
keyboard or mouse settings (currently only xset).
# Option "AllowNonLocalModInDev"
EndSection
# **********************************************************************
# Input devices
#
**********************************************************************
# **********************************************************************
# Core keyboard's InputDevice section
#
**********************************************************************
Section "InputDevice"
Identifier "Keyboard1"
Driver
"Keyboard"
# For most OSs the protocol can be omitted (it defaults to
"Standard").
# When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
# uncomment the following line.
# Option "Protocol" "Xqueue"
Option "AutoRepeat" "500 30"
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
# Option "Xleds" "1 2 3"
# Option "LeftAlt" "Meta"
# Option "RightAlt" "ModeShift"
# To customise the XKB settings to suit your keyboard, modify the
# lines
below (which are the defaults). For example, for a non-U.S.
#
keyboard, you will probably want to use:
# Option
"XkbModel" "pc102"
# If you have a US Microsoft Natural
keyboard, you can use:
# Option
"XkbModel" "microsoft"
#
# Then to change the
language, change the Layout setting.
# For example, a german layout can be
obtained with:
# Option "XkbLayout" "de"
#
or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
#
# If
you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"
# These are the default XKB settings for XFree86
#
Option "XkbRules" "xfree86"
# Option
"XkbModel" "pc101"
# Option
"XkbLayout" "us"
# Option "XkbVariant"
""
# Option "XkbOptions" ""
# Option "XkbDisable"
Option "XkbRules" "xfree86"
Option
"XkbModel" "pc101"
Option "XkbLayout" "us"
EndSection
# **********************************************************************
# Core Pointer's InputDevice section
#
**********************************************************************
Section "InputDevice"
# Identifier and driver
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "Microsoft"
Option "Device"
"/dev/ttyS0"
# BUKIE2:I don't use PS/2 mouse. I use
serial mouse --> /dev/ttyS0
# When using XQUEUE, comment out the above two lines, and uncomment
# the
following line.
# Option "Protocol" "Xqueue"
# Baudrate and SampleRate are only for some Logitech mice. In
# almost
every case these lines should be omitted.
# Option "BaudRate" "9600"
# Option
"SampleRate" "150"
# Emulate3Buttons is an option for 2-button Microsoft mice
#
Emulate3Timeout is the timeout in milliseconds (default is 50ms)
# Option "Emulate3Buttons"
# Option
"Emulate3Timeout" "50"
# ChordMiddle is an option for some 3-button Logitech mice
# Option "ChordMiddle"
EndSection
# **********************************************************************
# Other input device sections
# this is optional and is required only if
you
# are using extended input devices. This is for example
only. Refer
# to the XF86Config man page for a description of the
options.
#
**********************************************************************
#
# Section "InputDevice"
# Identifier "Mouse2"
# Driver "mouse"
# Option
"Protocol" "MouseMan"
#
Option
"Device" "/dev/mouse2"
#
EndSection
#
# Section "InputDevice"
# Identifier
"spaceball"
# Driver "magellan"
# Option
"Device" "/dev/cua0"
# EndSection
#
# Section "InputDevice"
# Identifier
"spaceball2"
# Driver "spaceorb"
# Option
"Device" "/dev/cua0"
# EndSection
#
# Section "InputDevice"
# Identifier
"touchscreen0"
# Driver
"microtouch"
# Option
"Device" "/dev/ttyS0"
# Option
"MinX" "1412"
# Option
"MaxX" "15184"
# Option
"MinY" "15372"
# Option
"MaxY" "1230"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
#
EndSection
#
# Section "InputDevice"
# Identifier
"touchscreen1"
# Driver "elo2300"
# Option
"Device" "/dev/ttyS0"
# Option
"MinX" "231"
# Option
"MaxX" "3868"
# Option
"MinY" "3858"
# Option
"MaxY" "272"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option
"ButtonThreshold" "17"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
#
EndSection
# **********************************************************************
# Monitor section
#
**********************************************************************
# Any number of monitor sections may be present
Section "Monitor"
Identifier "Sony1304"
# HorizSync is in kHz unless units are specified.
# HorizSync may be a
comma separated list of discrete values, or a
# comma separated list of
ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO
YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
HorizSync 28-50
# HorizSync
30-64 # multisync
# HorizSync 31.5, 35.2 # multiple fixed
sync frequencies
# HorizSync 15-25, 30-50 # multiple
ranges of sync frequencies
# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a
comma separated list of discrete values, or a
# comma separated list of
ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO
YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
VertRefresh 50-87
EndSection
# BUKIE3: Need to change Section Monitor
to match you monitor
# **********************************************************************
# Graphics device section
#
**********************************************************************
# Any number of graphics device sections may be present
# Standard VGA Device:
Section "Device"
Identifier "Standard VGA"
VendorName "Unknown"
BoardName
"Unknown"
# The chipset line is optional in most cases. It can be used to
override
# the driver's chipset detection, and should not normally be
specified.
# Chipset "generic"
# The Driver line must be present. When using run-time loadable driver
# modules, this line instructs the server to load the specified driver
#
module. Even when not using loadable driver modules, this line
#
indicates which driver should interpret the information in this section.
Driver "vga"
# The BusID line
is used to specify which of possibly multiple devices
# this section is
intended for. When this line isn't present, a device
# section can
only match up with the primary video device. For PCI
# devices a line
like the following could be used. This line should not
# normally be
included unless there is more than one video device
# intalled.
# BusID "PCI:0:10:0"
# VideoRam 256
# Clocks 25.2 28.3
EndSection
# Device configured by xf86config:
Section "Device"
Identifier "Intel-865"
Driver "vga"
#
unsupported card
#VideoRam 4096
# Insert Clocks lines here if appropriate
EndSection
# **********************************************************************
# Screen sections
#
**********************************************************************
# Any number of screen sections may be present. Each describes
#
the configuration of a single screen. A single specific screen section
# may be specified from the X server command line with the "-screen"
#
option.
Section "Screen"
Identifier "Screen 1"
Device "Intel-865"
Monitor "Sony1304"
DefaultDepth 16
Subsection "Display"
Depth 8
Modes "640x480" "800x600" "1024x768"
"1280x1024"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 16
Modes "640x480" "800x600" "1024x768"
"1280x1024"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 24
Modes "640x480" "800x600" "1024x768"
"1280x1024"
ViewPort 0 0
EndSubsection
EndSection
# BUKIE4: Check your resulution
# **********************************************************************
# ServerLayout sections.
#
**********************************************************************
# Any number of ServerLayout sections may be present. Each describes
# the way multiple screens are organised. A specific ServerLayout
# section may be specified from the X server command line with the
#
"-layout" option. In the absence of this, the first section is used.
#
When now ServerLayout section is present, the first Screen section
# is used
alone.
Section "ServerLayout"
# The Identifier line must be present
Identifier
"Simple Layout"
# Each Screen line specifies a Screen section name, and optionally
# the
relative position of other screens. The four names after
# primary
screen name are the screens to the top, bottom, left and right
# of the
primary screen. In this example, screen 2 is located to the
# right of
screen 1.
Screen "Screen 1"
# Each InputDevice line specifies an InputDevice section name and
#
optionally some options to specify the way the device is to be
# used.
Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".
InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection
Mauricio Rojas wrote:
Yes, I tried it, but it didnt work
Could you send your Xfree config file?Regards,
Mauricio Rojas P.
Gerente Producto y Servicio
ISC S.A. (http://www.isc.cl)
fono: 56 2 2362306
fax: 56 2 2362088-----Mensaje original-----
De: xfree86-admin@xxxxxxxxxxx [mailto:xfree86-admin@xxxxxxxxxxx] En nombre
de Bukie Mabayoje
Enviado el: Miércoles, 09 de Febrero de 2005 20:05
Para: xfree86@xxxxxxxxxxx
Asunto: Re: Xfree configuration problemI have the same chipset you have. And the lspci information is the same as
yours. So this is not an hw issue.
my X was able to identify the video on Kernel 2.2.20 and 2.4.18. Also, I am
running a older version of XFree 4.1.0.1 so it is not XFree issue either.I don't know if demo234.isc.cl 2.4.9-e.3 = Red Hat 2.1 2.4.9-e.3. Anyway did
you try Mark's workaround?Mauricio Rojas wrote:
> Hello,
>
> 1.- here it is the first output
> 00:00.0 Host bridge: Intel Corporation: Unknown device 2570 (rev 02)
> 00:02.0 VGA compatible controller: Intel Corporation: Unknown device
> 2572 (rev 02) 00:1d.0 USB Controller: Intel Corporation: Unknown
> device 24d2 (rev 02)
> 00:1d.1 USB Controller: Intel Corporation: Unknown device 24d4 (rev
> 02)
> 00:1d.2 USB Controller: Intel Corporation: Unknown device 24d7 (rev
> 02)
> 00:1d.3 USB Controller: Intel Corporation: Unknown device 24de (rev
> 02)
> 00:1d.7 USB Controller: Intel Corporation: Unknown device 24dd (rev
> 02) 00:1e.0 PCI bridge: Intel Corporation 82820 820 (Camino 2) Chipset
> PCI (rev
> c2)
> 00:1f.0 ISA bridge: Intel Corporation: Unknown device 24d0 (rev 02)
> 00:1f.1 IDE interface: Intel Corporation: Unknown device 24db (rev 02)
> 00:1f.3 SMBus: Intel Corporation: Unknown device 24d3 (rev 02)
> 00:1f.5 Multimedia audio controller: Intel Corporation: Unknown device
> 24d5 (rev 02) 01:0d.0 Ethernet controller: Realtek Semiconductor Co.,
> Ltd. RTL-8139 (rev
> 10)
> 2.- the second one
> Linux demo234.isc.cl 2.4.9-e.3 #1 Fri May 3 17:02:43 EDT 2002 i686
> unknown
>
> Chao,
> Mauricio Rojas P.
> Gerente Producto y Servicio
> ISC S.A. (http://www.isc.cl)
> fono: 56 2 2362306
> fax: 56 2 2362088
>
> -----Mensaje original-----
> De: xfree86-admin@xxxxxxxxxxx [mailto:xfree86-admin@xxxxxxxxxxx] En
> nombre de Bukie Mabayoje Enviado el: Miércoles, 09 de Febrero de 2005
> 18:00
> Para: xfree86@xxxxxxxxxxx
> Asunto: Re: Xfree configuration problem
>
> 1. Can you do /sbin/lspci and post it.
> 2. Can you do uname -a or uname -r and post it.
> The 865GV chipset was released after RH 2.1 AS, maybe for some reason
> it is having difficult in recognizing the video controller. But I doubt
it.
>
> Anyway, there is a work around that Mark posted a while back. Try
> Mark's suggestion .
> > A workaround would be to specify the bus id explicitly in the
> > Section "Device" of the XF86Config file. Eg.:
> >
> > BusID "PCI 00:02:0"
>
> Mauricio Rojas wrote:
>
> > Hi Guys,
> >
> > I have a problem to start X with my computer.
> > I have demo server of Linux RedHat 2.1 AS on a Asus P4P800-MX (Intel
> > 865GV) and a Intel Extreme Graphics Could help me with the
> > configuration please?
> >
> > Regards,
> > Mauricio
> >
> > (II) Loading extension GLX
> > (II) LoadModule: "pex5"
> > (II) Reloading /usr/X11R6/lib/modules/extensions/libpex5.a
> > (II) Loading extension X3D-PEX
> > (II) LoadModule: "record"
> > (II) Loading /usr/X11R6/lib/modules/extensions/librecord.a
> > (II) Module record: vendor="The XFree86 Project"
> > compiled for 4.1.0, module version = 1.13.0
> > Module class: XFree86 Server Extension
> > ABI class: XFree86 Server Extension, version 0.1
> > (II) Loading extension RECORD
> > (II) LoadModule: "xie"
> > (II) Loading /usr/X11R6/lib/modules/extensions/libxie.a
> > (II) Module xie: vendor="The XFree86 Project"
> > compiled for 4.1.0, module version = 1.0.0
> > Module class: XFree86 Server Extension
> > ABI class: XFree86 Server Extension, version 0.1
> > (II) Loading extension XIE
> > (II) LoadModule: "i810"
> > (II) Loading /usr/X11R6/lib/modules/drivers/i810_drv.o
> > (II) Module i810: vendor="The XFree86 Project"
> > compiled for 4.1.0, module version = 1.0.0
> > Module class: XFree86 Video Driver
> > ABI class: XFree86 Video Driver, version 0.4
> > (II) LoadModule: "mouse"
> > (II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
> > (II) Module mouse: vendor="The XFree86 Project"
> > compiled for 4.1.0, module version = 1.0.0
> > Module class: XFree86 XInput Driver
> > ABI class: XFree86 XInput driver, version 0.2
> > (II) I810: Driver for Intel i810 chipset: i810, i810-dc100, i810e,
> > i815
> > (II) Primary Device is: PCI 00:02:0
> > (--) Assigning device section with no busID to primary device
> > (EE) No devices detected.
> >
> > Fatal server error:
> > no screens found
> >
> > _______________________________________________
> > XFree86 mailing list
> > XFree86@xxxxxxxxxxx
> > http://XFree86.Org/mailman/listinfo/xfree86
> _______________________________________________
> XFree86 mailing list
> XFree86@xxxxxxxxxxx
> http://XFree86.Org/mailman/listinfo/xfree86
>
> _______________________________________________
> XFree86 mailing list
> XFree86@xxxxxxxxxxx
> http://XFree86.Org/mailman/listinfo/xfree86
_______________________________________________
XFree86 mailing list
XFree86@xxxxxxxxxxx
http://XFree86.Org/mailman/listinfo/xfree86_______________________________________________
XFree86 mailing list
XFree86@xxxxxxxxxxx
http://XFree86.Org/mailman/listinfo/xfree86
