i am sending this again the last time apparently i did not supply enough info
i have been working on this for two days reading and such but to no avail this is on a redhat 8.0 box reloaded(through an upgrade) the system without formatting, just trying to over write i am able to logon to a shell prompt but not able to start the xserver can you tell me how to go about fixing this problem?
at the bottom of the log it states: Fatal server error: could not open default font 'fixed'
could this be locked? where is this file?
just thought i put in another smaller hard drive reloaded red hat and it works fine x and all i need to get that other drive/system online
as it has lots of important data on it
server log:
XFree86 Version 4.2.0 (Red Hat Linux release: 4.2.0-72) / X Window System (protocol Version 11, revision 0, vendor release 6600) Release Date: 23 January 2002 If the server is older than 6-12 months, or if your card is newer than the above date, look for a newer version before reporting problems. (See http://www.XFree86.Org/) Build Operating System: Linux 2.4.18-11smp i686 [ELF] Build Host: daffy.perf.redhat.com
Module Loader present
OS Kernel: Linux version 2.4.18-14 (bhcompile@xxxxxxxxxxxxxxxxxxxxxxxxxx) (gcc version 3.2 20020903 (Red Hat Linux 8.0 3.2-7)) #1 Wed Sep 4 13:35:50 EDT 2002
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/XFree86.0.log", Time: Tue Dec 14 13:06:11 2004
(==) Using config file: "/etc/X11/XF86Config"
(==) ServerLayout "Anaconda Configured"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "ATI Mach64 3D RAGE II"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Mouse1"
(**) |-->Input Device "Keyboard0"
(**) Option "XkbRules" "xfree86"
(**) XKB: rules: "xfree86"
(**) Option "XkbModel" "pc105"
(**) XKB: model: "pc105"
(**) Option "XkbLayout" "us"
(**) XKB: layout: "us"
(==) Keyboard: CustomKeycode disabled
(**) FontPath set to "unix/:7100"
(**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(==) ModulePath set to "/usr/X11R6/lib/modules"
(--) using VT number 7
(WW) Open APM failed (/dev/apm_bios) (No such device)
(II) Module ABI versions:
XFree86 ANSI C Emulation: 0.1
XFree86 Video Driver: 0.5
XFree86 XInput driver : 0.3
XFree86 Server Extension : 0.1
XFree86 Font Renderer : 0.3
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 1.0.0
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.3
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.5
(II) PCI: Probing config type using method 1
(II) PCI: Config type is 1
(II) PCI: stages = 0x03, oldVal1 = 0x8000780c, mode1Res1 = 0x80000000
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 8086,7190 card 0000,0000 rev 03 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 8086,7191 card 0000,0000 rev 03 class 06,04,00 hdr 01
(II) PCI: 00:07:0: chip 8086,7110 card 0000,0000 rev 02 class 06,01,00 hdr 80
(II) PCI: 00:07:1: chip 8086,7111 card 0000,0000 rev 01 class 01,01,80 hdr 00
(II) PCI: 00:07:2: chip 8086,7112 card 0000,0000 rev 01 class 0c,03,00 hdr 00
(II) PCI: 00:07:3: chip 8086,7113 card 0000,0000 rev 02 class 06,80,00 hdr 00
(II) PCI: 00:0f:0: chip 10ec,8139 card 10ec,8139 rev 10 class 02,00,00 hdr 00
(II) PCI: 00:10:0: chip 1002,4756 card 1002,0088 rev 3a class 03,00,00 hdr 00
(II) PCI: End of PCI scan
(II) LoadModule: "scanpci"
(II) Loading /usr/X11R6/lib/modules/libscanpci.a
(II) Module scanpci: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.5
(II) UnloadModule: "scanpci"
(II) Unloading /usr/X11R6/lib/modules/libscanpci.a
(II) Host-to-PCI bridge:
(II) PCI-to-ISA bridge:
(II) PCI-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (-1,0,0), BCTRL: 0x08 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
[0] -1 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x84 (VGA_EN is cleared)
(II) Bus 1 I/O range:
(II) Bus 1 non-prefetchable memory range:
(II) Bus 1 prefetchable memory range:
(II) Bus -1: bridge is at (0:7:0), (0,-1,0), BCTRL: 0x08 (VGA_EN is set)
(II) Bus -1 I/O range:
(II) Bus -1 non-prefetchable memory range:
(II) Bus -1 prefetchable memory range:
(--) PCI:*(0:16:0) ATI Mach64 GV rev 58, Mem @ 0xf5000000/24, 0xf4000000/12, I/O @ 0x1400/8
(II) Addressable bus resource ranges are
[0] -1 0x00000000 - 0xffffffff (0x0) MX[B]
[1] -1 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
[0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0x00000000 - 0x000000ff (0x100) IX[B]
(II) Active PCI resource ranges:
[0] -1 0xf4001000 - 0xf40010ff (0x100) MX[B]
[1] -1 0xf8000000 - 0xfbffffff (0x4000000) MX[B]
[2] -1 0xf4000000 - 0xf4000fff (0x1000) MX[B](B)
[3] -1 0xf5000000 - 0xf5ffffff (0x1000000) MX[B](B)
[4] -1 0x00001000 - 0x000010ff (0x100) IX[B]
[5] -1 0x00001800 - 0x0000181f (0x20) IX[B]
[6] -1 0x00001820 - 0x0000182f (0x10) IX[B]
[7] -1 0x00001400 - 0x000014ff (0x100) IX[B](B)
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0xf4001000 - 0xf40010ff (0x100) MX[B]
[1] -1 0xf8000000 - 0xfbffffff (0x4000000) MX[B]
[2] -1 0xf4000000 - 0xf4000fff (0x1000) MX[B](B)
[3] -1 0xf5000000 - 0xf5ffffff (0x1000000) MX[B](B)
[4] -1 0x00001000 - 0x000010ff (0x100) IX[B]
[5] -1 0x00001800 - 0x0000181f (0x20) IX[B]
[6] -1 0x00001820 - 0x0000182f (0x10) IX[B]
[7] -1 0x00001400 - 0x000014ff (0x100) IX[B](B)
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
[0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0xf4001000 - 0xf40010ff (0x100) MX[B]
[6] -1 0xf8000000 - 0xfbffffff (0x4000000) MX[B]
[7] -1 0xf4000000 - 0xf4000fff (0x1000) MX[B](B)
[8] -1 0xf5000000 - 0xf5ffffff (0x1000000) MX[B](B)
[9] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
[10] -1 0x00000000 - 0x000000ff (0x100) IX[B]
[11] -1 0x00001000 - 0x000010ff (0x100) IX[B]
[12] -1 0x00001800 - 0x0000181f (0x20) IX[B]
[13] -1 0x00001820 - 0x0000182f (0x10) IX[B]
[14] -1 0x00001400 - 0x000014ff (0x100) IX[B](B)
(II) LoadModule: "dbe"
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension FontCache
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "fbdevhw"
(II) Loading /usr/X11R6/lib/modules/linux/libfbdevhw.a
(II) Module fbdevhw: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 0.0.2
ABI class: XFree86 Video Driver, version 0.5
(II) LoadModule: "dri"
(II) Loading /usr/X11R6/lib/modules/extensions/libdri.a
(II) Module dri: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.1
(II) Loading sub module "drm"
(II) LoadModule: "drm"
(II) Loading /usr/X11R6/lib/modules/linux/libdrm.a
(II) Module drm: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension XFree86-DRI
(II) LoadModule: "glx"
(II) Loading /usr/X11R6/lib/modules/extensions/libglx.a
(II) Module glx: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.1
(II) Loading sub module "GLcore"
(II) LoadModule: "GLcore"
(II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a
(II) Module GLcore: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/X11R6/lib/modules/extensions/librecord.a
(II) Module record: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 1.13.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension RECORD
(II) LoadModule: "freetype"
(II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.a
(II) Module freetype: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 1.1.10
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.3
(II) Loading font FreeType
(II) LoadModule: "type1"
(II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
(II) Module type1: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 1.0.1
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.3
(II) Loading font Type1
(II) Loading font CID
(II) LoadModule: "ati"
(II) Loading /usr/X11R6/lib/modules/drivers/ati_drv.o
(II) Module ati: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 6.4.8
Module class: XFree86 Video Driver
ABI class: XFree86 Video Driver, version 0.5
(II) LoadModule: "mouse"
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 1.0.0
Module class: XFree86 XInput Driver
ABI class: XFree86 XInput driver, version 0.3
(II) ATI: ATI driver (version 6.4.8) for chipsets: ati, ativga
(II) R128: Driver for ATI Rage 128 chipsets: ATI Rage 128 RE (PCI),
ATI Rage 128 RF (AGP), ATI Rage 128 RG (AGP), ATI Rage 128 RK (PCI),
ATI Rage 128 RL (AGP), ATI Rage 128 SM (AGP),
ATI Rage 128 Pro PD (PCI), ATI Rage 128 Pro PF (AGP),
ATI Rage 128 Pro PP (PCI), ATI Rage 128 Pro PR (PCI),
ATI Rage 128 Pro ULTRA TF (AGP), ATI Rage 128 Pro ULTRA TL (AGP),
ATI Rage 128 Pro ULTRA TR (AGP), ATI Rage 128 Mobility LE (PCI),
ATI Rage 128 Mobility LF (AGP), ATI Rage 128 Mobility MF (AGP),
ATI Rage 128 Mobility ML (AGP)
(II) RADEON: Driver for ATI Radeon chipsets: ATI Radeon QD (AGP),
ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
ATI Radeon VE QY (AGP), ATI Radeon VE QZ (AGP),
ATI Radeon Mobility LW (AGP), ATI Radeon Mobility LX (AGP),
ATI Radeon Mobility LY (AGP), ATI Radeon Mobility LZ (AGP),
ATI Radeon 8500 QL (AGP), ATI Radeon 8500 QN (AGP),
ATI Radeon 8500 QO (AGP), ATI Radeon 8500 Ql (AGP),
ATI Radeon 8500 BB (AGP), ATI Radeon 7500 QW (AGP)
(II) Primary Device is: PCI 00:10:0
(II) ATI: Candidate "Device" section "ATI Mach64 3D RAGE II".
(II) ATI: Shared PCI/AGP Mach64 in slot 0:16:0 detected.
(II) ATI: Shared PCI/AGP Mach64 in slot 0:16:0 assigned to active "Device" section "ATI Mach64 3D RAGE II".
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0xf4001000 - 0xf40010ff (0x100) MX[B]
[6] -1 0xf8000000 - 0xfbffffff (0x4000000) MX[B]
[7] -1 0xf4000000 - 0xf4000fff (0x1000) MX[B](B)
[8] -1 0xf5000000 - 0xf5ffffff (0x1000000) MX[B](B)
[9] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
[10] -1 0x00000000 - 0x000000ff (0x100) IX[B]
[11] -1 0x00001000 - 0x000010ff (0x100) IX[B]
[12] -1 0x00001800 - 0x0000181f (0x20) IX[B]
[13] -1 0x00001820 - 0x0000182f (0x10) IX[B]
[14] -1 0x00001400 - 0x000014ff (0x100) IX[B](B)
(II) Loading sub module "atimisc"
(II) LoadModule: "atimisc"
(II) Loading /usr/X11R6/lib/modules/drivers/atimisc_drv.o
(II) Module atimisc: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 6.4.8
Module class: XFree86 Video Driver
ABI class: XFree86 Video Driver, version 0.5
(II) resource ranges after probing:
[0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0xf4001000 - 0xf40010ff (0x100) MX[B]
[6] -1 0xf8000000 - 0xfbffffff (0x4000000) MX[B]
[7] -1 0xf4000000 - 0xf4000fff (0x1000) MX[B](B)
[8] -1 0xf5000000 - 0xf5ffffff (0x1000000) MX[B](B)
[9] 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[10] 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[11] 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[12] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
[13] -1 0x00000000 - 0x000000ff (0x100) IX[B]
[14] -1 0x00001000 - 0x000010ff (0x100) IX[B]
[15] -1 0x00001800 - 0x0000181f (0x20) IX[B]
[16] -1 0x00001820 - 0x0000182f (0x10) IX[B]
[17] -1 0x00001400 - 0x000014ff (0x100) IX[B](B)
[18] 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[19] 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(==) ATI(0): Chipset: "ati".
(**) ATI(0): Depth 24, (--) framebuffer bpp 32
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/X11R6/lib/modules/linux/libint10.a
(II) Module int10: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.5
(II) ATI(0): Primary V_BIOS segment is: 0xc000
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Loading /usr/X11R6/lib/modules/libddc.a
(II) Module ddc: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.5
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/X11R6/lib/modules/libvbe.a
(II) Module vbe: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.5
(II) ATI(0): VESA BIOS detected
(II) ATI(0): VESA VBE Version 2.0
(II) ATI(0): VESA VBE Total Mem: 4096 kB
(II) ATI(0): VESA VBE OEM: ATI MACH64
(II) ATI(0): VESA VBE OEM Software Rev: 1.0
(II) ATI(0): VESA VBE OEM Vendor: ATI Technologies Inc.
(II) ATI(0): VESA VBE OEM Product: MACH64GT
(II) ATI(0): VESA VBE OEM Product Rev: 01.00
(II) ATI(0): VESA VBE DDC supported
(II) ATI(0): VESA VBE DDC Level none
(II) ATI(0): VESA VBE DDC transfer in appr. 2 sec.
(II) ATI(0): VESA VBE DDC read failed
(--) ATI(0): ATI 3D Rage IIc graphics controller detected.
(--) ATI(0): Chip type 4756 "GV", version 2, foundry UMC, class 0, revision 0x00.
(--) ATI(0): PCI bus interface detected; block I/O base is 0x1400.
(--) ATI(0): ATI Mach64 adapter detected.
(!!) ATI(0): For information on using the multimedia capabilities
of this adapter, please see http://gatos.sf.net.
(--) ATI(0): Internal RAMDAC (subtype 1) detected.
(==) ATI(0): RGB weight 888
(==) ATI(0): Default visual is TrueColor
(==) ATI(0): Using gamma correction (1.0, 1.0, 1.0)
(II) ATI(0): Using Mach64 accelerator CRTC.
(II) ATI(0): Storing hardware cursor image at 0xF53FFC00.
(II) ATI(0): Using 8 MB linear aperture at 0xF5000000.
(!!) ATI(0): Virtual resolutions will be limited to 4095 kB
due to linear aperture size and/or placement of hardware cursor image area.
(II) ATI(0): Using Block 0 MMIO aperture at 0xF4000400.
(II) ATI(0): Using Block 1 MMIO aperture at 0xF4000000.
(==) ATI(0): Write-combining range (0xf5000000,0x400000)
(II) ATI(0): MMIO write caching enabled.
(--) ATI(0): 4096 kB of Pseudo-EDO DRAM detected (using 4095 kB).
(WW) ATI(0): Cannot shadow an accelerated frame buffer.
(II) ATI(0): Engine XCLK 60.044 MHz; Refresh rate code 3.
(--) ATI(0): Internal programmable clock generator detected.
(--) ATI(0): Reference clock 157.5/11 (14.318) MHz.
(II) ATI(0): Monitor0: Using hsync range of 31.50-48.50 kHz
(II) ATI(0): Monitor0: Using vrefresh range of 50.00-70.00 Hz
(II) ATI(0): Maximum clock: 120.00 MHz
(II) ATI(0): Not using default mode "640x350" (vrefresh out of range)
(II) ATI(0): Not using default mode "320x175" (vrefresh out of range)
(II) ATI(0): Not using default mode "640x400" (vrefresh out of range)
(II) ATI(0): Not using default mode "320x200" (vrefresh out of range)
(II) ATI(0): Not using default mode "720x400" (vrefresh out of range)
(II) ATI(0): Not using default mode "360x200" (vrefresh out of range)
(II) ATI(0): Not using default mode "640x480" (vrefresh out of range)
(II) ATI(0): Not using default mode "320x240" (vrefresh out of range)
(II) ATI(0): Not using default mode "640x480" (vrefresh out of range)
(II) ATI(0): Not using default mode "320x240" (vrefresh out of range)
(II) ATI(0): Not using default mode "640x480" (vrefresh out of range)
(II) ATI(0): Not using default mode "320x240" (vrefresh out of range)
(II) ATI(0): Not using default mode "800x600" (vrefresh out of range)
(II) ATI(0): Not using default mode "400x300" (vrefresh out of range)
(II) ATI(0): Not using default mode "800x600" (vrefresh out of range)
(II) ATI(0): Not using default mode "400x300" (vrefresh out of range)
(II) ATI(0): Not using default mode "800x600" (hsync out of range)
(II) ATI(0): Not using default mode "400x300" (hsync out of range)
(II) ATI(0): Not using default mode "1024x768" (vrefresh out of range)
(II) ATI(0): Not using default mode "512x384" (vrefresh out of range)
(II) ATI(0): Not using default mode "1024x768" (hsync out of range)
(II) ATI(0): Not using default mode "512x384" (hsync out of range)
(II) ATI(0): Not using default mode "1024x768" (hsync out of range)
(II) ATI(0): Not using default mode "512x384" (hsync out of range)
(II) ATI(0): Not using default mode "1024x768" (hsync out of range)
(II) ATI(0): Not using default mode "512x384" (hsync out of range)
(II) ATI(0): Not using default mode "1152x864" (hsync out of range)
(II) ATI(0): Not using default mode "576x432" (hsync out of range)
(II) ATI(0): Not using default mode "1280x960" (insufficient memory for mode)
(II) ATI(0): Not using default mode "640x480" (hsync out of range)
(II) ATI(0): Not using default mode "1280x960" (insufficient memory for mode)
(II) ATI(0): Not using default mode "640x480" (hsync out of range)
(II) ATI(0): Not using default mode "1280x1024" (insufficient memory for mode)
(II) ATI(0): Not using default mode "640x512" (hsync out of range)
(II) ATI(0): Not using default mode "1280x1024" (insufficient memory for mode)
(II) ATI(0): Not using default mode "640x512" (hsync out of range)
(II) ATI(0): Not using default mode "1280x1024" (insufficient memory for mode)
(II) ATI(0): Not using default mode "640x512" (hsync out of range)
(II) ATI(0): Not using default mode "1600x1200" (insufficient memory for mode)
(II) ATI(0): Not using default mode "800x600" (hsync out of range)
(II) ATI(0): Not using default mode "1600x1200" (insufficient memory for mode)
(II) ATI(0): Not using default mode "800x600" (hsync out of range)
(II) ATI(0): Not using default mode "1600x1200" (insufficient memory for mode)
(II) ATI(0): Not using default mode "800x600" (hsync out of range)
(II) ATI(0): Not using default mode "1600x1200" (insufficient memory for mode)
(II) ATI(0): Not using default mode "800x600" (hsync out of range)
(II) ATI(0): Not using default mode "1600x1200" (insufficient memory for mode)
(II) ATI(0): Not using default mode "800x600" (hsync out of range)
(II) ATI(0): Not using default mode "1792x1344" (insufficient memory for mode)
(II) ATI(0): Not using default mode "896x672" (hsync out of range)
(II) ATI(0): Not using default mode "1792x1344" (insufficient memory for mode)
(II) ATI(0): Not using default mode "896x672" (bad mode clock/interlace/doublescan)
(II) ATI(0): Not using default mode "1856x1392" (insufficient memory for mode)
(II) ATI(0): Not using default mode "928x696" (hsync out of range)
(II) ATI(0): Not using default mode "1856x1392" (insufficient memory for mode)
(II) ATI(0): Not using default mode "928x696" (bad mode clock/interlace/doublescan)
(II) ATI(0): Not using default mode "1920x1440" (insufficient memory for mode)
(II) ATI(0): Not using default mode "960x720" (hsync out of range)
(II) ATI(0): Not using default mode "1920x1440" (insufficient memory for mode)
(II) ATI(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) ATI(0): Not using default mode "832x624" (hsync out of range)
(II) ATI(0): Not using default mode "416x312" (hsync out of range)
(II) ATI(0): Not using default mode "1152x864" (bad mode clock/interlace/doublescan)
(II) ATI(0): Not using default mode "576x432" (hsync out of range)
(II) ATI(0): Not using default mode "1400x1050" (insufficient memory for mode)
(II) ATI(0): Not using default mode "700x525" (hsync out of range)
(II) ATI(0): Not using default mode "1400x1050" (insufficient memory for mode)
(II) ATI(0): Not using default mode "700x525" (hsync out of range)
(II) ATI(0): Not using default mode "1400x1050" (insufficient memory for mode)
(II) ATI(0): Not using default mode "700x525" (hsync out of range)
(II) ATI(0): Not using default mode "1400x1050" (insufficient memory for mode)
(II) ATI(0): Not using default mode "700x525" (hsync out of range)
(II) ATI(0): Not using default mode "1600x1024" (insufficient memory for mode)
(II) ATI(0): Not using default mode "800x512" (hsync out of range)
(II) ATI(0): Not using default mode "1920x1200" (insufficient memory for mode)
(II) ATI(0): Not using default mode "960x600" (hsync out of range)
(--) ATI(0): Virtual size is 800x600 (pitch 800)
(**) ATI(0): Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
(II) ATI(0): Modeline "800x600" 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync
(**) ATI(0): Default mode "640x480": 25.2 MHz, 31.5 kHz, 60.0 Hz
(II) ATI(0): Modeline "640x480" 25.20 640 656 752 800 480 490 492 525 -hsync -vsync
(==) ATI(0): DPI set to (75, 75)
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/X11R6/lib/modules/libxaa.a
(II) Module xaa: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.5
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/X11R6/lib/modules/libramdac.a
(II) Module ramdac: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.5
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/X11R6/lib/modules/libfb.a
(II) Module fb: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 1.0.0
ABI class: XFree86 ANSI C Emulation, version 0.1
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] 0 0xf4000000 - 0xf4000fff (0x1000) MS[B]
[1] 0 0xf5000000 - 0xf5ffffff (0x1000000) MS[B]
[2] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[3] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[4] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[5] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
[6] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[7] -1 0xf4001000 - 0xf40010ff (0x100) MX[B]
[8] -1 0xf8000000 - 0xfbffffff (0x4000000) MX[B]
[9] -1 0xf4000000 - 0xf4000fff (0x1000) MX[B](B)
[10] -1 0xf5000000 - 0xf5ffffff (0x1000000) MX[B](B)
[11] 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprU)
[12] 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprU)
[13] 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprU)
[14] 0 0x00001400 - 0x000014ff (0x100) IS[B]
[15] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
[16] -1 0x00000000 - 0x000000ff (0x100) IX[B]
[17] -1 0x00001000 - 0x000010ff (0x100) IX[B]
[18] -1 0x00001800 - 0x0000181f (0x20) IX[B]
[19] -1 0x00001820 - 0x0000182f (0x10) IX[B]
[20] -1 0x00001400 - 0x000014ff (0x100) IX[B](B)
[21] 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
[22] 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU)
(==) ATI(0): Write-combining range (0xf5000000,0x400000)
(II) ATI(0): Largest offscreen areas (with overlaps):
(II) ATI(0): 800 x 710 rectangle at 0,600
(II) ATI(0): 320 x 711 rectangle at 0,600
(II) ATI(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
Indirect CPU to Screen color expansion
Solid Lines
Offscreen Pixmaps
Setting up tile and stipple cache:
30 128x128 slots
(==) ATI(0): Backing store disabled
(==) ATI(0): Silken mouse enabled
(**) Option "dpms"
(**) ATI(0): DPMS enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension LBX
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(**) Option "Protocol" "IMPS/2"
(**) Mouse0: Protocol: "IMPS/2"
(**) Option "CorePointer"
(**) Mouse0: Core Pointer
(**) Option "Device" "/dev/psaux"
(**) Option "Emulate3Buttons" "no"
(**) Option "ZAxisMapping" "4 5"
(**) Mouse0: ZAxisMapping: buttons 4 and 5
(**) Mouse0: Buttons: 5
(**) Option "Protocol" "IMPS/2"
(**) Mouse1: Protocol: "IMPS/2"
(**) Option "SendCoreEvents"
(**) Mouse1: always reports core events
(**) Option "Device" "/dev/input/mice"
(**) Option "Emulate3Buttons" "no"
(**) Option "ZAxisMapping" "4 5"
(**) Mouse1: ZAxisMapping: buttons 4 and 5
(**) Mouse1: Buttons: 5
(II) Keyboard "Keyboard0" handled by legacy driver
(II) XINPUT: Adding extended input device "Mouse1" (type: MOUSE)
(II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE)
Could not init font path element unix/:7100, removing from list!
Fatal server error: could not open default font 'fixed'
When reporting a problem related to a server crash, please send the full server output, not just the last messages. This can be found in the log file "/var/log/XFree86.0.log". Please report problems to xfree86@xxxxxxxxxxxx
config file:
# File generated by anaconda.
Section "ServerLayout"
Identifier "Anaconda Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Mouse1" "SendCoreEvents"
InputDevice "Keyboard0" "CoreKeyboard"
EndSectionSection "Files"
# The location of the RGB database. Note, this is the name of the # file minus the extension (like ".txt" or ".db"). There is normally # no need to change the default.
RgbPath "/usr/X11R6/lib/X11/rgb"
# Multiple FontPath entries are allowed (they are concatenated together) # By default, Red Hat 6.0 and later now use a font server independent of # the X server to render fonts.
FontPath "unix/:7100"
EndSection
Section "Module"
Load "dbe"
Load "extmod"
Load "fbdevhw"
Load "dri"
Load "glx"
Load "record"
Load "freetype"
Load "type1"
EndSectionSection "InputDevice"
Identifier "Keyboard0"
Driver "keyboard"# Option "AutoRepeat" "500 5"
# when using XQUEUE, comment out the above line, and uncomment the # following line # Option "Protocol" "Xqueue"
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1)) # Option "Xleds" "1 2 3"
# To disable the XKEYBOARD extension, uncomment XkbDisable. # Option "XkbDisable"
# To customise the XKB settings to suit your keyboard, modify the # lines below (which are the defaults). For example, for a non-U.S. # keyboard, you will probably want to use: # Option "XkbModel" "pc102" # If you have a US Microsoft Natural keyboard, you can use: # Option "XkbModel" "microsoft" # # Then to change the language, change the Layout setting. # For example, a german layout can be obtained with: # Option "XkbLayout" "de" # or: # Option "XkbLayout" "de" # Option "XkbVariant" "nodeadkeys" # # If you'd like to switch the positions of your capslock and # control keys, use: # Option "XkbOptions" "ctrl:swapcaps" Option "XkbRules" "xfree86" Option "XkbModel" "pc105" Option "XkbLayout" "us" #Option "XkbVariant" "" #Option "XkbOptions" "" EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "IMPS/2"
Option "Device" "/dev/psaux"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "no"
EndSection
Section "InputDevice" Identifier "Mouse1" Driver "mouse" Option "Device" "/dev/input/mice" Option "Protocol" "IMPS/2" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection
Section "Monitor" Identifier "Monitor0" VendorName "Monitor Vendor" ModelName "Monitor Model" HorizSync 31.5-48.5 VertRefresh 50-70 Option "dpms"
EndSection
Section "Device"
# no known options
Identifier "ATI Mach64 3D RAGE II"
Driver "ati"
VendorName "ATI Mach64 3D RAGE II"
BoardName "ATI Mach64 3D RAGE II"#BusID EndSection
Section "Screen"
Identifier "Screen0"
Device "ATI Mach64 3D RAGE II"
Monitor "Monitor0"
DefaultDepth 24 Subsection "Display"
Depth 24
Modes "800x600" "640x480"
EndSubsectionEndSection
Section "DRI" Mode 0666 EndSection
_______________________________________________ XFree86 mailing list XFree86@xxxxxxxxxxx http://XFree86.Org/mailman/listinfo/xfree86
