1)VERSION: $ XFree86 -version This is a pre-release version of XFree86, and is not supported in any way. Bugs may be reported to XFree86@xxxxxxxxxxx and patches submitted to fixes@xxxxxxxxxxxx Before reporting bugs in pre-release versions, please check the latest version in the XFree86 CVS repository (http://www.XFree86.Org/cvs). XFree86 Version 4.3.0.1 Release Date: 15 August 2003 X Protocol Version 11, Revision 0, Release 6.6 Build Operating System: Linux 2.6.3-3mdkenterprise i686 [ELF] Build Date: 24 March 2004 Before reporting problems, check http://www.XFree86.Org/ to make sure that you have the latest version. Module Loader present 2)OS: Mandrake Linux 10.0 Official Release 3)VIDEO HARDWARE: ATI Radeon 9600 4)PROBLEM: I`m a new user of linux and I have some problems with XFree. As I said I have ATI Radeon 9600, I dowloaded the drivers for linux from the official web site and installed it as kernel module. Everything was OK. Then I wanted to test OpenGl and I started Tuxracer. It is impossible to play because it is very slow!!! VERY SLOW! Then I tested OpenGl in Xtraceroute and it didn`t worked too(very slowly and without textures). I hope to get answer, sorry for mistakes, English is not my native language. Thank you! ########################################################################### CONFIG: # ********************************************************************** # DRI Section # ********************************************************************** Section "dri" # Access to OpenGL ICD is allowed for all users: Mode 0666 # Access to OpenGL ICD is restricted to a specific user group: # Group 100 # users # Mode 0660 EndSection # ********************************************************************** # Module section -- this section is used to specify # which dynamically loadable modules to load. # ********************************************************************** # Section "Module" Load "dbe" Load "type1" Load "freetype" Load "glx" # libglx.a Load "dri" # libdri.a Subsection "extmod" Option "omit xfree86-dga" # don't initialise the DGA extension EndSubsection EndSection Section "Files" RgbPath "/usr/X11R6/lib/X11/rgb" FontPath "/usr/X11R6/lib/X11/fonts/misc/" FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/Type1/" FontPath "/usr/X11R6/lib/X11/fonts/Speedo/" FontPath "/usr/X11R6/lib/X11/fonts/75dpi/" EndSection Section "ServerFlags" EndSection # Uncomment this to cause a core dump at the spot where a signal is # received. This may leave the console in an unusable state, but may # provide a better stack trace in the core dump to aid in debugging # Option "NoTrapSignals" # Uncomment this to disable the <Crtl><Alt><BS> server abort sequence # This allows clients to receive this key event. # Option "DontZap" # Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching # sequences. This allows clients to receive these key events. # Option "Dont Zoom" # Uncomment this to disable tuning with the xvidtune client. With # it the client can still run and fetch card and monitor attributes, # but it will not be allowed to change them. If it tries it will # receive a protocol error. # Option "DisableVidModeExtension" # Uncomment this to enable the use of a non-local xvidtune client. # Option "AllowNonLocalXvidtune" # Uncomment this to disable dynamically modifying the input device # (mouse and keyboard) settings. # Option "DisableModInDev" # Uncomment this to enable the use of a non-local client to # change the keyboard or mouse settings (currently only xset). # Option "AllowNonLocalModInDev" # ********************************************************************** # Input devices # ********************************************************************** # ********************************************************************** # Core keyboard's InputDevice section # ********************************************************************** Section "InputDevice" Identifier "Keyboard1" Driver "Keyboard" Option "XkbModel" "pc105" Option "XkbLayout" "us,ru(winkeys)" # For most OSs the protocol can be omitted (it defaults to "Standard"). # When using XQUEUE (only for SVR3 and SVR4, but not Solaris), # uncomment the following line. # Option "Protocol" "Xqueue" Option "AutoRepeat" "500 30" Option "XkbOptions" "grp:ctrl_shift_toggle,grp_led:scroll" # Specify which keyboard LEDs can be user-controlled (eg, with xset(1)) # Option "Xleds" "1 2 3" # Option "LeftAlt" "Meta" # Option "RightAlt" "ModeShift" # To customise the XKB settings to suit your keyboard, modify the # lines below (which are the defaults). For example, for a non-U.S. # keyboard, you will probably want to use: # Option "XkbModel" "pc102" # If you have a US Microsoft Natural keyboard, you can use: # Option "XkbModel" "microsoft" # # Then to change the language, change the Layout setting. # For example, a german layout can be obtained with: # Option "XkbLayout" "de" # or: # Option "XkbLayout" "de" # Option "XkbVariant" "nodeadkeys" # # If you'd like to switch the positions of your capslock and # control keys, use: # Option "XkbOptions" "ctrl:swapcaps" # These are the default XKB settings for XFree86 # Option "XkbRules" "xfree86" # Option "XkbModel" "pc101" # Option "XkbLayout" "us" # Option "XkbVariant" "" # Option "XkbOptions" "" # Option "XkbDisable" Option "XkbRules" "xfree86" EndSection # ********************************************************************** # Core Pointer's InputDevice section # ********************************************************************** Section "InputDevice" # Identifier and driver Identifier "Mouse1" Driver "mouse" Option "Protocol" "ImPS/2" Option "Device" "/dev/mouse" # When using XQUEUE, comment out the above two lines, and uncomment # the following line. # Option "Protocol" "Xqueue" # Baudrate and SampleRate are only for some Logitech mice. In # almost every case these lines should be omitted. # Option "BaudRate" "9600" # Option "SampleRate" "150" # Emulate3Buttons is an option for 2-button Microsoft mice # Emulate3Timeout is the timeout in milliseconds (default is 50ms) # Option "Emulate3Buttons" # Option "Emulate3Timeout" "50" # ChordMiddle is an option for some 3-button Logitech mice # Option "ChordMiddle" Option "ZAxisMapping" "4 5" EndSection # ********************************************************************** # Other input device sections # this is optional and is required only if you # are using extended input devices. This is for example only. Refer # to the XF86Config man page for a description of the options. # ********************************************************************** # # Section "InputDevice" # Identifier "Mouse2" # Driver "mouse" # Option "Protocol" "MouseMan" # Option "Device" "/dev/mouse2" # EndSection # # Section "InputDevice" # Identifier "spaceball" # Driver "magellan" # Option "Device" "/dev/cua0" # EndSection # # Section "InputDevice" # Identifier "spaceball2" # Driver "spaceorb" # Option "Device" "/dev/cua0" # EndSection # # Section "InputDevice" # Identifier "touchscreen0" # Driver "microtouch" # Option "Device" "/dev/ttyS0" # Option "MinX" "1412" # Option "MaxX" "15184" # Option "MinY" "15372" # Option "MaxY" "1230" # Option "ScreenNumber" "0" # Option "ReportingMode" "Scaled" # Option "ButtonNumber" "1" # Option "SendCoreEvents" # EndSection # # Section "InputDevice" # Identifier "touchscreen1" # Driver "elo2300" # Option "Device" "/dev/ttyS0" # Option "MinX" "231" # Option "MaxX" "3868" # Option "MinY" "3858" # Option "MaxY" "272" # Option "ScreenNumber" "0" # Option "ReportingMode" "Scaled" # Option "ButtonThreshold" "17" # Option "ButtonNumber" "1" # Option "SendCoreEvents" # EndSection # ********************************************************************** # Monitor section # ********************************************************************** # Any number of monitor sections may be present Section "Monitor" Identifier "Monitor0" HorizSync 31.5 - 91.1 VertRefresh 60 - 100 Option "DPMS" # === mode lines based on GTF === # VGA @ 100Hz # Modeline "640x480@100" 43.163 640 680 744 848 480 481 484 509 +hsync +vsync # SVGA @ 100Hz # Modeline "800x600@100" 68.179 800 848 936 1072 600 601 604 636 +hsync +vsync # XVGA @ 100Hz # Modeline "1024x768@100" 113.309 1024 1096 1208 1392 768 769 772 814 +hsync +vsync # 1152x864 @ 60Hz # Modeline "1152x864@60" 81.642 1152 1216 1336 1520 864 865 868 895 +hsync +vsync # 1152x864 @ 85Hz # Modeline "1152x864@85" 119.651 1152 1224 1352 1552 864 865 868 907 +hsync +vsync # 1152x864 @ 100Hz # Modeline "1152x864@100" 143.472 1152 1232 1360 1568 864 865 868 915 +hsync +vsync # 1280x960 @ 75Hz # Modeline "1280x960@75" 129.859 1280 1368 1504 1728 960 961 964 1002 +hsync +vsync # 1280x960 @ 100Hz # Modeline "1280x960@100" 178.992 1280 1376 1520 1760 960 961 964 1017 +hsync +vsync # SXGA @ 100Hz # Modeline "1280x1024@100" 190.960 1280 1376 1520 1760 1024 1025 1028 1085 +hsync +vsync # SPEA GDM-1950 (60Hz,64kHz,110MHz,-,-): 1280x1024 @ V-freq: 60.00 Hz, H-freq: 63.73 KHz # Modeline "GDM-1950" 109.62 1280 1336 1472 1720 1024 1024 1026 1062 -hsync -vsync # 1600x1000 @ 60Hz # Modeline "1600x1000" 133.142 1600 1704 1872 2144 1000 1001 1004 1035 +hsync +vsync # 1600x1000 @ 75Hz # Modeline "1600x1000" 169.128 1600 1704 1880 2160 1000 1001 1004 1044 +hsync +vsync # 1600x1000 @ 85Hz # Modeline "1600x1000" 194.202 1600 1712 1888 2176 1000 1001 1004 1050 +hsync +vsync # 1600x1000 @ 100Hz # Modeline "1600x1000" 232.133 1600 1720 1896 2192 1000 1001 1004 1059 +hsync +vsync # 1600x1024 @ 60Hz # Modeline "1600x1024" 136.385 1600 1704 1872 2144 1024 1027 1030 1060 +hsync +vsync # 1600x1024 @ 75Hz # Modeline "1600x1024" 174.416 1600 1712 1888 2176 1024 1025 1028 1069 +hsync +vsync # 1600x1024 @ 76Hz # Modeline "1600x1024" 170.450 1600 1632 1792 2096 1024 1027 1030 1070 +hsync +vsync # 1600x1024 @ 85Hz # Modeline "1600x1024" 198.832 1600 1712 1888 2176 1024 1027 1030 1075 +hsync +vsync # 1920x1080 @ 60Hz # Modeline "1920x1080" 172.798 1920 2040 2248 2576 1080 1081 1084 1118 -hsync -vsync # 1920x1080 @ 75Hz # Modeline "1920x1080" 211.436 1920 2056 2264 2608 1080 1081 1084 1126 +hsync +vsync # 1920x1200 @ 60Hz # Modeline "1920x1200" 193.156 1920 2048 2256 2592 1200 1201 1203 1242 +hsync +vsync # 1920x1200 @ 75Hz # Modeline "1920x1200" 246.590 1920 2064 2272 2624 1200 1201 1203 1253 +hsync +vsync # 2048x1536 @ 60 # Modeline "2048x1536" 266.952 2048 2200 2424 2800 1536 1537 1540 1589 +hsync +vsync # 2048x1536 @ 60 # Modeline "2048x1536" 266.952 2048 2200 2424 2800 1536 1537 1540 1589 +hsync +vsync # 1400x1050 @ 60Hz M9 Laptop mode # ModeLine "1400x1050" 122.000 1400 1488 1640 1880 1050 1052 1064 1082 +hsync +vsync # 1920x2400 @ 25Hz for IBM T221, VS VP2290 and compatible display devices # Modeline "1920x2400@25" 124.620 1920 1928 1980 2048 2400 2401 2403 2434 +hsync +vsync # 1920x2400 @ 30Hz for IBM T221, VS VP2290 and compatible display devices # Modeline "1920x2400@30" 149.250 1920 1928 1982 2044 2400 2402 2404 2434 +hsync +vsync EndSection # ********************************************************************** # Graphics device section # ********************************************************************** # Any number of graphics device sections may be present # Standard VGA Device: Section "Device" Identifier "Standard VGA" VendorName "Unknown" BoardName "Unknown" # The chipset line is optional in most cases. It can be used to override # the driver's chipset detection, and should not normally be specified. # Chipset "generic" # The Driver line must be present. When using run-time loadable driver # modules, this line instructs the server to load the specified driver # module. Even when not using loadable driver modules, this line # indicates which driver should interpret the information in this section. Driver "vga" # The BusID line is used to specify which of possibly multiple devices # this section is intended for. When this line isn't present, a device # section can only match up with the primary video device. For PCI # devices a line like the following could be used. This line should not # normally be included unless there is more than one video device # installed. # BusID "PCI:0:10:0" # VideoRam 256 # Clocks 25.2 28.3 EndSection # === ATI device section === Section "Device" Identifier "ATI Graphics Adapter" Driver "fglrx" Screen 0 BusID "PCI:1:0:0" # vendor=1002, device=4150 Option "FSAAMSPosY1" "0.000000" Option "StereoSyncEnable" "1" # ### generic DRI settings ### # === disable PnP Monitor === #Option "NoDDC" Option "FSAAMSPosX5" "0.000000" Option "FSAAMSPosY4" "0.000000" Option "FSAAMSPosX2" "0.000000" # === Pseudo Color Visuals (8-bit visuals) === Option "PseudoColorVisuals" "off" Option "FSAAMSPosX4" "0.000000" Option "FSAAMSPosY0" "0.000000" Option "FSAADisableGamma" "no" # === Video Overlay for the Xv extension === Option "VideoOverlay" "on" Option "ForceGenericCPU" "no" Option "GammaCorrectionII" "0x00000000" # === misc DRI settings === Option "mtrr" "off" # disable DRI mtrr mapper, driver has its own code for mtrr Option "VRefresh2" "unspecified" Option "FSAAMSPosY5" "0.000000" # === Center Mode (Laptops only) === Option "CenterMode" "off" Option "IgnoreEDID" "off" # === OpenGL Overlay === # Note: When OpenGL Overlay is enabled, Video Overlay # will be disabled automatically Option "OpenGLOverlay" "off" Option "FSAACustomizeMSPos" "no" Option "FSAAScale" "1" # ### FireGL DDX driver module specific settings ### # === Screen Management === Option "DesktopSetup" "0x00000000" Option "HSync2" "unspecified" Option "TVHStartAdj" "0" # === FSAA Management === Option "FSAAEnable" "no" Option "FSAAMSPosX0" "0.000000" Option "no_dri" "no" Option "GammaCorrectionI" "0x00000000" Option "UseInternalAGPGART" "yes" Option "BlockSignalsOnLock" "on" Option "FSAAMSPosX1" "0.000000" Option "MonitorLayout" "AUTO, AUTO" # === Misc Options === Option "UseFastTLS" "0" # === disable/enable XAA/DRI === Option "no_accel" "no" Option "FSAAMSPosY3" "0.000000" # === OpenGL specific profiles/settings === Option "Capabilities" "0x00000000" Option "TVStandard" "NTSC-M" Option "TVVPosAdj" "0" Option "TVColorAdj" "0" Option "FSAAMSPosY2" "0.000000" # === TV-out Management === Option "NoTV" "yes" Option "TVHPosAdj" "0" Option "TVHSizeAdj" "0" Option "ScreenOverlap" "0" # === QBS Management === Option "Stereo" "off" Option "FSAAMSPosX3" "0.000000" Option "TVVSizeAdj" "0" EndSection # ********************************************************************** # Screen sections # ********************************************************************** # Any number of screen sections may be present. Each describes # the configuration of a single screen. A single specific screen section # may be specified from the X server command line with the "-screen" # option. Section "Screen" Identifier "Screen0" Device "ATI Graphics Adapter" Monitor "Monitor0" #Option "backingstore" Subsection "Display" Depth 24 Modes "1024x768" "1280x1024" "800x600" ViewPort 0 0 # initial origin if mode is smaller than desktop # Virtual 1280 1024 EndSubsection DefaultDepth 24 EndSection # ********************************************************************** # ServerLayout sections. # ********************************************************************** # Any number of ServerLayout sections may be present. Each describes # the way multiple screens are organised. A specific ServerLayout # section may be specified from the X server command line with the # "-layout" option. In the absence of this, the first section is used. # When now ServerLayout section is present, the first Screen section # is used alone. Section "ServerLayout" # The Identifier line must be present Identifier "Server Layout" # Each InputDevice line specifies an InputDevice section name and # optionally some options to specify the way the device is to be # used. Those options include "CorePointer", "CoreKeyboard" and # "SendCoreEvents". InputDevice "Mouse1" "CorePointer" InputDevice "Keyboard1" "CoreKeyboard" # Each Screen line specifies a Screen section name, and optionally # the relative position of other screens. The four names after # primary screen name are the screens to the top, bottom, left and right # of the primary screen. Screen "Screen0" EndSection ######################################################################## LOG: This is a pre-release version of XFree86, and is not supported in any way. Bugs may be reported to XFree86@xxxxxxxxxxx and patches submitted to fixes@xxxxxxxxxxxx Before reporting bugs in pre-release versions, please check the latest version in the XFree86 CVS repository (http://www.XFree86.Org/cvs). XFree86 Version 4.3.0.1 Release Date: 15 August 2003 X Protocol Version 11, Revision 0, Release 6.6 Build Operating System: Linux 2.6.3-3mdkenterprise i686 [ELF] Build Date: 24 March 2004 Before reporting problems, check http://www.XFree86.Org/ to make sure that you have the latest version. Module Loader present Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/XFree86.0.log", Time: Thu Dec 2 00:46:38 2004 (==) Using config file: "/etc/X11/XF86Config-4" (==) ServerLayout "Server Layout" (**) |-->Screen "Screen0" (0) (**) | |-->Monitor "Monitor0" (**) | |-->Device "ATI Graphics Adapter" (**) |-->Input Device "Mouse1" (**) |-->Input Device "Keyboard1" (**) Option "AutoRepeat" "500 30" (**) Option "XkbRules" "xfree86" (**) XKB: rules: "xfree86" (**) Option "XkbModel" "pc105" (**) XKB: model: "pc105" (**) Option "XkbLayout" "us,ru(winkeys)" (**) XKB: layout: "us,ru(winkeys)" (**) Option "XkbOptions" "grp:ctrl_shift_toggle,grp_led:scroll" (**) XKB: options: "grp:ctrl_shift_toggle,grp_led:scroll" (==) Keyboard: CustomKeycode disabled (**) FontPath set to "/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/75dpi/:unscaled,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/75dpi/" (**) RgbPath set to "/usr/X11R6/lib/X11/rgb" (==) ModulePath set to "/usr/X11R6/lib/modules" Using vt 7 (--) using VT number 7 (II) Open APM successful (II) Module ABI versions: XFree86 ANSI C Emulation: 0.2 XFree86 Video Driver: 0.6 XFree86 XInput driver : 0.4 XFree86 Server Extension : 0.2 XFree86 Font Renderer : 0.4 (II) Loader running on linux (II) LoadModule: "bitmap" (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a (II) Module bitmap: vendor="The XFree86 Project" compiled for 4.3.0.1, module version = 1.0.0 Module class: XFree86 Font Renderer ABI class: XFree86 Font Renderer, version 0.4 (II) Loading font Bitmap (II) LoadModule: "pcidata" (II) Loading /usr/X11R6/lib/modules/libpcidata.a (II) Module pcidata: vendor="The XFree86 Project" compiled for 4.3.0.1, module version = 1.0.0 ABI class: XFree86 Video Driver, version 0.6 (II) PCI: Probing config type using method 1 (II) PCI: Config type is 1 (II) PCI: stages = 0x03, oldVal1 = 0x00000000, mode1Res1 = 0x80000000 (II) PCI: PCI scan (all values are in hex) (II) PCI: 00:00:0: chip 1106,3099 card 1043,8064 rev 00 class 06,00,00 hdr 00 (II) PCI: 00:01:0: chip 1106,b099 card 0000,0000 rev 00 class 06,04,00 hdr 01 (II) PCI: 00:0c:0: chip 10ec,8139 card 11f6,8139 rev 10 class 02,00,00 hdr 00 (II) PCI: 00:0d:0: chip 10ec,8139 card 10ec,8139 rev 10 class 02,00,00 hdr 00 (II) PCI: 00:0e:0: chip 1102,0002 card 1102,8027 rev 08 class 04,01,00 hdr 80 (II) PCI: 00:0e:1: chip 1102,7002 card 1102,0020 rev 08 class 09,80,00 hdr 80 (II) PCI: 00:11:0: chip 1106,3147 card 1043,8052 rev 00 class 06,01,00 hdr 80 (II) PCI: 00:11:1: chip 1106,0571 card 1043,8052 rev 06 class 01,01,8a hdr 00 (II) PCI: 00:11:2: chip 1106,3038 card 0925,1234 rev 23 class 0c,03,00 hdr 00 (II) PCI: 00:11:3: chip 1106,3038 card 0925,1234 rev 23 class 0c,03,00 hdr 00 (II) PCI: 01:00:0: chip 1002,4150 card 174b,7c20 rev 00 class 03,00,00 hdr 80 (II) PCI: 01:00:1: chip 1002,4170 card 174b,7c21 rev 00 class 03,80,00 hdr 00 (II) PCI: End of PCI scan (II) Host-to-PCI bridge: (II) Bus 0: bridge is at (0:0:0), (0,0,1), BCTRL: 0x0008 (VGA_EN is set) (II) Bus 0 I/O range: [0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B] (II) Bus 0 non-prefetchable memory range: [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B] (II) Bus 0 prefetchable memory range: [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B] (II) PCI-to-PCI bridge: (II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x0008 (VGA_EN is set) (II) Bus 1 I/O range: [0] -1 0 0x0000d000 - 0x0000dfff (0x1000) IX[B] (II) Bus 1 non-prefetchable memory range: [0] -1 0 0xbf000000 - 0xbfffffff (0x1000000) MX[B] (II) Bus 1 prefetchable memory range: [0] -1 0 0xc0000000 - 0xf7ffffff (0x38000000) MX[B] (II) PCI-to-ISA bridge: (II) Bus -1: bridge is at (0:17:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set) (--) PCI:*(1:0:0) ATI Technologies Inc unknown chipset (0x4150) rev 0, Mem @ 0xe0000000/28, 0xbf800000/16, I/O @ 0xd800/8, BIOS @ 0xdffe0000/17 (--) PCI: (1:0:1) ATI Technologies Inc unknown chipset (0x4170) rev 0, Mem @ 0xc0000000/28, 0xbf000000/16 (II) Addressable bus resource ranges are [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B] [1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B] (II) OS-reported resource ranges: [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] (II) PCI Memory resource overlap reduced 0xf8000000 from 0xfbffffff to 0xf7ffffff (II) Active PCI resource ranges: [0] -1 0 0xbe000000 - 0xbe0000ff (0x100) MX[B] [1] -1 0 0xbe800000 - 0xbe8000ff (0x100) MX[B] [2] -1 0 0xf8000000 - 0xf7ffffff (0x0) MX[B]O [3] -1 0 0xdffe0000 - 0xdfffffff (0x20000) MX[B](B) [4] -1 0 0xbf800000 - 0xbf80ffff (0x10000) MX[B](B) [5] -1 0 0xe0000000 - 0xefffffff (0x10000000) MX[B](B) [6] -1 0 0x00009800 - 0x0000981f (0x20) IX[B] [7] -1 0 0x0000a000 - 0x0000a01f (0x20) IX[B] [8] -1 0 0x0000a400 - 0x0000a40f (0x10) IX[B] [9] -1 0 0x0000b000 - 0x0000b01f (0x20) IX[B] [10] -1 0 0x0000b400 - 0x0000b4ff (0x100) IX[B] [11] -1 0 0x0000b800 - 0x0000b8ff (0x100) IX[B] [12] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[B](B) (II) Inactive PCI resource ranges: [0] -1 0 0xbf000000 - 0xbf00ffff (0x10000) MX[B](B) [1] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[B](B) [2] -1 0 0x0000a800 - 0x0000a807 (0x8) IX[B] (II) Active PCI resource ranges after removing overlaps: [0] -1 0 0xbe000000 - 0xbe0000ff (0x100) MX[B] [1] -1 0 0xbe800000 - 0xbe8000ff (0x100) MX[B] [2] -1 0 0xf8000000 - 0xf7ffffff (0x0) MX[B]O [3] -1 0 0xdffe0000 - 0xdfffffff (0x20000) MX[B](B) [4] -1 0 0xbf800000 - 0xbf80ffff (0x10000) MX[B](B) [5] -1 0 0xe0000000 - 0xefffffff (0x10000000) MX[B](B) [6] -1 0 0x00009800 - 0x0000981f (0x20) IX[B] [7] -1 0 0x0000a000 - 0x0000a01f (0x20) IX[B] [8] -1 0 0x0000a400 - 0x0000a40f (0x10) IX[B] [9] -1 0 0x0000b000 - 0x0000b01f (0x20) IX[B] [10] -1 0 0x0000b400 - 0x0000b4ff (0x100) IX[B] [11] -1 0 0x0000b800 - 0x0000b8ff (0x100) IX[B] [12] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[B](B) (II) Inactive PCI resource ranges after removing overlaps: [0] -1 0 0xbf000000 - 0xbf00ffff (0x10000) MX[B](B) [1] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[B](B) [2] -1 0 0x0000a800 - 0x0000a807 (0x8) IX[B] (II) OS-reported resource ranges after removing overlaps with PCI: [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] (II) All system resource ranges: [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [5] -1 0 0xbe000000 - 0xbe0000ff (0x100) MX[B] [6] -1 0 0xbe800000 - 0xbe8000ff (0x100) MX[B] [7] -1 0 0xf8000000 - 0xf7ffffff (0x0) MX[B]O [8] -1 0 0xdffe0000 - 0xdfffffff (0x20000) MX[B](B) [9] -1 0 0xbf800000 - 0xbf80ffff (0x10000) MX[B](B) [10] -1 0 0xe0000000 - 0xefffffff (0x10000000) MX[B](B) [11] -1 0 0xbf000000 - 0xbf00ffff (0x10000) MX[B](B) [12] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[B](B) [13] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [14] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [15] -1 0 0x00009800 - 0x0000981f (0x20) IX[B] [16] -1 0 0x0000a000 - 0x0000a01f (0x20) IX[B] [17] -1 0 0x0000a400 - 0x0000a40f (0x10) IX[B] [18] -1 0 0x0000b000 - 0x0000b01f (0x20) IX[B] [19] -1 0 0x0000b400 - 0x0000b4ff (0x100) IX[B] [20] -1 0 0x0000b800 - 0x0000b8ff (0x100) IX[B] [21] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[B](B) [22] -1 0 0x0000a800 - 0x0000a807 (0x8) IX[B] (II) LoadModule: "dbe" (II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a (II) Module dbe: vendor="The XFree86 Project" compiled for 4.3.0.1, module version = 1.0.0 Module class: XFree86 Server Extension ABI class: XFree86 Server Extension, version 0.2 (II) Loading extension DOUBLE-BUFFER (II) LoadModule: "type1" (II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a (II) Module type1: vendor="The XFree86 Project" compiled for 4.3.0.1, module version = 1.0.2 Module class: XFree86 Font Renderer ABI class: XFree86 Font Renderer, version 0.4 (II) Loading font Type1 (II) Loading font CID (II) LoadModule: "freetype" (II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.a (II) Module freetype: vendor="The XFree86 Project" compiled for 4.3.0.1, module version = 2.0.2 Module class: XFree86 Font Renderer ABI class: XFree86 Font Renderer, version 0.4 (II) Loading font FreeType (II) LoadModule: "glx" (II) Loading /usr/X11R6/lib/modules/extensions/libglx.a (II) Module glx: vendor="The XFree86 Project" compiled for 4.3.0.1, module version = 1.0.0 ABI class: XFree86 Server Extension, version 0.2 (II) Loading sub module "GLcore" (II) LoadModule: "GLcore" (II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a (II) Module GLcore: vendor="The XFree86 Project" compiled for 4.3.0.1, module version = 1.0.0 ABI class: XFree86 Server Extension, version 0.2 (II) Loading extension GLX (II) LoadModule: "dri" (II) Loading /usr/X11R6/lib/modules/extensions/libdri.a (II) Module dri: vendor="The XFree86 Project" compiled for 4.3.0.1, module version = 1.0.0 ABI class: XFree86 Server Extension, version 0.2 (II) Loading sub module "drm" (II) LoadModule: "drm" (II) Loading /usr/X11R6/lib/modules/linux/libdrm.a (II) Module drm: vendor="The XFree86 Project" compiled for 4.3.0.1, module version = 1.0.0 ABI class: XFree86 Server Extension, version 0.2 (II) Loading extension XFree86-DRI (II) LoadModule: "extmod" (II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a (II) Module extmod: vendor="The XFree86 Project" compiled for 4.3.0.1, module version = 1.0.0 Module class: XFree86 Server Extension ABI class: XFree86 Server Extension, version 0.2 (II) Loading extension SHAPE (II) Loading extension MIT-SUNDRY-NONSTANDARD (II) Loading extension BIG-REQUESTS (II) Loading extension SYNC (II) Loading extension MIT-SCREEN-SAVER (II) Loading extension XC-MISC (II) Loading extension XFree86-VidModeExtension (II) Loading extension XFree86-Misc (II) Loading extension DPMS (II) Loading extension FontCache (II) Loading extension TOG-CUP (II) Loading extension Extended-Visual-Information (II) Loading extension XVideo (II) Loading extension XVideo-MotionCompensation (II) Loading extension X-Resource (II) LoadModule: "fglrx" (II) Loading /usr/X11R6/lib/modules/drivers/fglrx_drv.o (II) Module fglrx: vendor="Fire GL - ATI Research GmbH, Germany" compiled for 4.3.0.1, module version = 3.14.6 Module class: XFree86 Video Driver ABI class: XFree86 Video Driver, version 0.6 (II) LoadModule: "mouse" (II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o (II) Module mouse: vendor="The XFree86 Project" compiled for 4.3.0.1, module version = 1.0.0 Module class: XFree86 XInput Driver ABI class: XFree86 XInput driver, version 0.4 (II) FireGL8700/8800: Driver for chipset: ATI RV250 Id (R9000), ATI RV250 Ie (R9000), ATI RV250 If (R9000), ATI RV250 Ig (R9000), ATI RV250 Ld (M9), ATI RV250 Le (M9), ATI RV250 Lf (M9), ATI RV250 Lg (M9), ATI RV280 5960 (R9200 PRO), ATI RV280 Ya (R9200LE), ATI RV250SE Yd (R9200SE), ATI RV250 5C61 (M9+), ATI RV250 5C63 (M9+), ATI R200 QH (R8500), ATI R200 QL (R8500), ATI R200 QM (R9100), ATI R200 QT (R8500), ATI R200 QU (R9100), ATI R200 BB (R8500), ATI RV350 AP (R9600), ATI RV350SE AQ (R9600SE), ATI RV350 AR (R9600 PRO), ATI RV350 NP (M10), ATI R300 AD (R9500), ATI R300 AE (R9500), ATI R300 AF (R9500), ATI R300 AG (Fire GL Z1/X1), ATI R300 ND (R9700 PRO), ATI R300 NE (R9700/R9500 PRO), ATI R300 NF (R9600 TX), ATI R300 NG (Fire GL X1), ATI R350SE AH (R9800SE), ATI R350 AK (Fire GL unknown), ATI RV350 AS (Fire GL T2), ATI RV350 AT (Fire GL T2), ATI RV350 AU (Fire GL T2), ATI RV350 AV (Fire GL T2), ATI RV350 AW (Fire GL T2), ATI R350 NH (R9800), ATI R350LE NI (R9800LE), ATI R350 NJ (R9800), ATI R350 NK (Fire GL X2), ATI RV350 NT (WS/M10), ATI RV370 5B60, ATI RV370 5B61, ATI RV370 5B62, ATI RV370 5B63, ATI RV370 5B64, ATI RV370 5B66, ATI RV370 5B67, ATI RV370 5B70, ATI RV370 5B71, ATI RV370 5B72, ATI RV370 5B73, ATI RV370 5460, ATI RV370 5461, ATI RV370 5462, ATI RV370 5463, ATI RV370 5464, ATI RV370 5465, ATI RV370 5466, ATI RV370 5467, ATI RV370 5470, ATI RV370 5471, ATI RV370 5472, ATI RV370 5473, ATI RV380 AP, ATI RV380 AQ, ATI RV380 AR, ATI RV380 AS, ATI RV380 AT, ATI RV380 AU, ATI RV380 AV, ATI RV380 AW, ATI RV380 AP2, ATI RV380 AQ2, ATI RV380 AR2, ATI RV380 AS2, ATI RV380 NP, ATI RV380 NQ, ATI RV380 NR, ATI RV380 NS, ATI RV380 NT, ATI RV380 NU, ATI RV380 NV, ATI RV380 NW, ATI RV380 NP2, ATI RV380 NQ2, ATI RV380 NR2, ATI RV380 NS2, ATI R420 JH, ATI R420 JI, ATI R420 JJ, ATI R420 JK, ATI R420 JL, ATI R420 JM, ATI R420 JN, ATI R420 JP, ATI R423 UH, ATI R423 UI, ATI R423 UJ, ATI R423 UK, ATI R423 UL, ATI R423 UM, ATI R423 ]W, ATI R423 UP, ATI R423 UQ, ATI R423 UR, ATI R423 UT, ATI R423 ]H, ATI R423 ]I, ATI RV410 VJ, ATI RV410 VK, ATI RV410 VL, ATI RV410 VM, ATI RV410 ^H, ATI RV410 ^I, ATI RV410 ^J, ATI RV410 ^K, ATI RV410 ^L, ATI RV410 ^M, ATI RV410 ^O, ATI RV410 VR, ATI RV410 VS, ATI RV410 ^R, ATI RV410 ^S, ATI RV410 ^U, ATI RS300 IGP, ATI RS350 IGP, ATI RS300M IGP (II) Primary Device is: PCI 01:00:0 (WW) fglrx: No matching Device section for instance (BusID PCI:1:0:1) found (--) Chipset ATI RV350 AP (R9600) found (II) resource ranges after xf86ClaimFixedResources() call: [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [5] -1 0 0xbe000000 - 0xbe0000ff (0x100) MX[B] [6] -1 0 0xbe800000 - 0xbe8000ff (0x100) MX[B] [7] -1 0 0xf8000000 - 0xf7ffffff (0x0) MX[B]O [8] -1 0 0xdffe0000 - 0xdfffffff (0x20000) MX[B](B) [9] -1 0 0xbf800000 - 0xbf80ffff (0x10000) MX[B](B) [10] -1 0 0xe0000000 - 0xefffffff (0x10000000) MX[B](B) [11] -1 0 0xbf000000 - 0xbf00ffff (0x10000) MX[B](B) [12] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[B](B) [13] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [14] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [15] -1 0 0x00009800 - 0x0000981f (0x20) IX[B] [16] -1 0 0x0000a000 - 0x0000a01f (0x20) IX[B] [17] -1 0 0x0000a400 - 0x0000a40f (0x10) IX[B] [18] -1 0 0x0000b000 - 0x0000b01f (0x20) IX[B] [19] -1 0 0x0000b400 - 0x0000b4ff (0x100) IX[B] [20] -1 0 0x0000b800 - 0x0000b8ff (0x100) IX[B] [21] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[B](B) [22] -1 0 0x0000a800 - 0x0000a807 (0x8) IX[B] (II) fglrx(0): pEnt->device->identifier=0x82089c0 (II) resource ranges after probing: [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [5] -1 0 0xbe000000 - 0xbe0000ff (0x100) MX[B] [6] -1 0 0xbe800000 - 0xbe8000ff (0x100) MX[B] [7] -1 0 0xf8000000 - 0xf7ffffff (0x0) MX[B]O [8] -1 0 0xdffe0000 - 0xdfffffff (0x20000) MX[B](B) [9] -1 0 0xbf800000 - 0xbf80ffff (0x10000) MX[B](B) [10] -1 0 0xe0000000 - 0xefffffff (0x10000000) MX[B](B) [11] -1 0 0xbf000000 - 0xbf00ffff (0x10000) MX[B](B) [12] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[B](B) [13] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B] [14] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B] [15] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B] [16] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [17] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [18] -1 0 0x00009800 - 0x0000981f (0x20) IX[B] [19] -1 0 0x0000a000 - 0x0000a01f (0x20) IX[B] [20] -1 0 0x0000a400 - 0x0000a40f (0x10) IX[B] [21] -1 0 0x0000b000 - 0x0000b01f (0x20) IX[B] [22] -1 0 0x0000b400 - 0x0000b4ff (0x100) IX[B] [23] -1 0 0x0000b800 - 0x0000b8ff (0x100) IX[B] [24] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[B](B) [25] -1 0 0x0000a800 - 0x0000a807 (0x8) IX[B] [26] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B] [27] 0 0 0x000003c0 - 0x000003df (0x20) IS[B] (II) Setting vga for screen 0. (II) fglrx(0): === [R200PreInit] === begin, [s] (II) Loading sub module "vgahw" (II) LoadModule: "vgahw" (II) Loading /usr/X11R6/lib/modules/libvgahw.a (II) Module vgahw: vendor="The XFree86 Project" compiled for 4.3.0.1, module version = 0.1.0 ABI class: XFree86 Video Driver, version 0.6 (II) fglrx(0): PCI bus 1 card 0 func 0 (**) fglrx(0): Depth 24, (--) framebuffer bpp 32 (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps) (==) fglrx(0): Default visual is TrueColor (**) fglrx(0): Option "NoAccel" "no" (**) fglrx(0): Option "NoDRI" "no" (**) fglrx(0): Option "Capabilities" "0x00000000" (**) fglrx(0): Option "GammaCorrectionI" "0x00000000" (**) fglrx(0): Option "GammaCorrectionII" "0x00000000" (**) fglrx(0): Option "OpenGLOverlay" "off" (**) fglrx(0): Option "VideoOverlay" "on" (**) fglrx(0): Option "DesktopSetup" "0x00000000" (**) fglrx(0): Option "MonitorLayout" "AUTO, AUTO" (**) fglrx(0): Option "HSync2" "unspecified" (**) fglrx(0): Option "VRefresh2" "unspecified" (**) fglrx(0): Option "ScreenOverlap" "0" (**) fglrx(0): Option "IgnoreEDID" "off" (**) fglrx(0): Option "UseInternalAGPGART" "yes" (**) fglrx(0): Option "Stereo" "off" (**) fglrx(0): Option "StereoSyncEnable" "1" (**) fglrx(0): Option "UseFastTLS" "0" (**) fglrx(0): Option "BlockSignalsOnLock" "on" (**) fglrx(0): Option "ForceGenericCPU" "no" (**) fglrx(0): Option "CenterMode" "off" (**) fglrx(0): Option "FSAAScale" "1" (**) fglrx(0): Option "FSAAEnable" "no" (**) fglrx(0): Option "FSAADisableGamma" "no" (**) fglrx(0): Option "FSAACustomizeMSPos" "no" (**) fglrx(0): Option "FSAAMSPosX0" "0.000000" (**) fglrx(0): Option "FSAAMSPosY0" "0.000000" (**) fglrx(0): Option "FSAAMSPosX1" "0.000000" (**) fglrx(0): Option "FSAAMSPosY1" "0.000000" (**) fglrx(0): Option "FSAAMSPosX2" "0.000000" (**) fglrx(0): Option "FSAAMSPosY2" "0.000000" (**) fglrx(0): Option "FSAAMSPosX3" "0.000000" (**) fglrx(0): Option "FSAAMSPosY3" "0.000000" (**) fglrx(0): Option "FSAAMSPosX4" "0.000000" (**) fglrx(0): Option "FSAAMSPosY4" "0.000000" (**) fglrx(0): Option "FSAAMSPosX5" "0.000000" (**) fglrx(0): Option "FSAAMSPosY5" "0.000000" (**) fglrx(0): Option "NoTV" "yes" (**) fglrx(0): Option "TVStandard" "NTSC-M" (**) fglrx(0): Option "TVHSizeAdj" "0" (**) fglrx(0): Option "TVVSizeAdj" "0" (**) fglrx(0): Option "TVHPosAdj" "0" (**) fglrx(0): Option "TVVPosAdj" "0" (**) fglrx(0): Option "TVHStartAdj" "0" (**) fglrx(0): Option "TVColorAdj" "0" (**) fglrx(0): Option "PseudoColorVisuals" "off" (**) fglrx(0): Qbs disabled (==) fglrx(0): RGB weight 888 (II) fglrx(0): Using 8 bits per RGB (8 bit DAC) (**) fglrx(0): Gamma Correction for I is 0x00000000 (**) fglrx(0): Gamma Correction for II is 0x00000000 (==) fglrx(0): Buffer Tiling is ON (II) Loading sub module "int10" (II) LoadModule: "int10" (II) Loading /usr/X11R6/lib/modules/linux/libint10.a (II) Module int10: vendor="The XFree86 Project" compiled for 4.3.0.1, module version = 1.0.0 ABI class: XFree86 Video Driver, version 0.6 (II) fglrx(0): initializing int10 (II) fglrx(0): Primary V_BIOS segment is: 0xc000 (**) fglrx(0): Option "mtrr" "off" (--) fglrx(0): Chipset: "ATI RV350 AP (R9600)" (Chipset = 0x4150) (--) fglrx(0): (PciSubVendor = 0x174b, PciSubDevice = 0x7c20) (--) fglrx(0): board vendor info: third party grafics adapter - NOT original ATI (--) fglrx(0): Linear framebuffer (phys) at 0xe0000000 (--) fglrx(0): MMIO registers at 0xbf800000 (--) fglrx(0): ROM-BIOS at 0xdffe0000 (--) fglrx(0): ChipExtRevID = 0x00 (--) fglrx(0): ChipIntRevID = 0x0C (--) fglrx(0): VideoRAM: 131072 kByte (64-bit SDR SDRAM) (WW) fglrx(0): board is an unknown third party board, chipset is supported (II) Loading sub module "ddc" (II) LoadModule: "ddc" (II) Loading /usr/X11R6/lib/modules/libddc.a (II) Module ddc: vendor="The XFree86 Project" compiled for 4.3.0.1, module version = 1.0.0 ABI class: XFree86 Video Driver, version 0.6 (II) Loading sub module "i2c" (II) LoadModule: "i2c" (II) Loading /usr/X11R6/lib/modules/libi2c.a (II) Module i2c: vendor="The XFree86 Project" compiled for 4.3.0.1, module version = 1.2.0 ABI class: XFree86 Video Driver, version 0.6 (II) fglrx(0): I2C bus "DDC" initialized. (II) fglrx(0): Connector Layout from BIOS -------- (II) fglrx(0): Connector1: DDCType-3, DACType-0, TMDSType--1, ConnectorType-2 (II) fglrx(0): Connector0: DDCType-2, DACType-1, TMDSType-0, ConnectorType-3 (**) fglrx(0): MonitorLayout Option: Monitor1--Type AUTO, Monitor2--Type AUTO (II) fglrx(0): I2C device "DDC:ddc2" registered at address 0xA0. (II) fglrx(0): I2C device "DDC:ddc2" removed. (II) fglrx(0): I2C device "DDC:ddc2" registered at address 0xA0. (II) fglrx(0): I2C device "DDC:ddc2" removed. (II) fglrx(0): I2C device "DDC:ddc2" registered at address 0xA0. (II) fglrx(0): I2C device "DDC:ddc2" removed. (II) fglrx(0): DDC detected on DDCType 2 with Monitor Type 0 (II) fglrx(0): I2C device "DDC:ddc2" registered at address 0xA0. (II) fglrx(0): I2C device "DDC:ddc2" removed. (II) fglrx(0): I2C device "DDC:ddc2" registered at address 0xA0. (II) fglrx(0): I2C device "DDC:ddc2" removed. (II) fglrx(0): DDC detected on DDCType 3 with Monitor Type 1 (II) fglrx(0): Primary head: Monitor -- NONE Connector -- DVI-I DAC Type -- TVDAC/ExtDAC TMDS Type -- Internal DDC Type -- DVI_DDC (II) fglrx(0): Secondary head: Monitor -- CRT Connector -- VGA DAC Type -- Primary TMDS Type -- NONE DDC Type -- VGA_DDC (II) fglrx(0): EDID data from the display on Secondary head --------------------------- (II) fglrx(0): Manufacturer: GSM Model: 42dd Serial#: 16843009 (II) fglrx(0): Year: 2000 Week: 0 (II) fglrx(0): EDID Version: 1.1 (II) fglrx(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V (II) fglrx(0): Signal levels configurable (II) fglrx(0): Sync: Separate Composite SyncOnGreen (II) fglrx(0): Max H-Image Size [cm]: horiz.: 33 vert.: 25 (II) fglrx(0): Gamma: 2.90 (II) fglrx(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display (II) fglrx(0): redX: 0.635 redY: 0.326 greenX: 0.275 greenY: 0.607 (II) fglrx(0): blueX: 0.142 blueY: 0.072 whiteX: 0.282 whiteY: 0.298 (II) fglrx(0): Supported VESA Video Modes: (II) fglrx(0): 720x400@70Hz (II) fglrx(0): 720x400@88Hz (II) fglrx(0): 640x480@60Hz (II) fglrx(0): 640x480@67Hz (II) fglrx(0): 640x480@72Hz (II) fglrx(0): 640x480@75Hz (II) fglrx(0): 800x600@56Hz (II) fglrx(0): 800x600@60Hz (II) fglrx(0): 800x600@72Hz (II) fglrx(0): 800x600@75Hz (II) fglrx(0): 832x624@75Hz (II) fglrx(0): 1024x768@87Hz (interlaced) (II) fglrx(0): 1024x768@60Hz (II) fglrx(0): 1024x768@70Hz (II) fglrx(0): 1024x768@75Hz (II) fglrx(0): 1280x1024@75Hz (II) fglrx(0): 1152x870@75Hz (II) fglrx(0): Manufacturer's mask: 0 (II) fglrx(0): Supported Future Video Modes: (II) fglrx(0): #0: hsize: 640 vsize 480 refresh: 60 vid: 16433 (II) fglrx(0): #1: hsize: 720 vsize 540 refresh: 70 vid: 19003 (II) fglrx(0): #2: hsize: 800 vsize 600 refresh: 85 vid: 22853 (II) fglrx(0): #3: hsize: 1024 vsize 768 refresh: 85 vid: 22881 (II) fglrx(0): #4: hsize: 1152 vsize 864 refresh: 75 vid: 20337 (II) fglrx(0): #5: hsize: 1280 vsize 1024 refresh: 75 vid: 36737 (II) fglrx(0): #6: hsize: 1280 vsize 1024 refresh: 85 vid: 39297 (II) fglrx(0): #7: hsize: 1600 vsize 1200 refresh: 75 vid: 20393 (II) fglrx(0): Supported additional Video Mode: (II) fglrx(0): clock: 135.0 MHz Image Size: 310 x 230 mm (II) fglrx(0): h_active: 1280 h_sync: 1296 h_sync_end 1440 h_blank_end 1688 h_border: 0 (II) fglrx(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0 (II) fglrx(0): Supported additional Video Mode: (II) fglrx(0): clock: 202.5 MHz Image Size: 310 x 230 mm (II) fglrx(0): h_active: 1600 h_sync: 1664 h_sync_end 1856 h_blank_end 2160 h_border: 0 (II) fglrx(0): v_active: 1200 v_sync: 1201 v_sync_end 1204 v_blanking: 1250 v_border: 0 (II) fglrx(0): Ranges: V min: 50 V max: 160 Hz, H min: 30 H max: 96 kHz, PixClock max 200 MHz (II) fglrx(0): Monitor name: Flatron795FT (II) fglrx(0): (II) fglrx(0): DesktopSetup 0x0000 (**) fglrx(0): PseudoColor visuals disabled (**) fglrx(0): Overlay disabled (**) fglrx(0): Overlay disabled (II) fglrx(0): PLL parameters: rf=2700 rd=12 min=20000 max=40000 (==) fglrx(0): Using gamma correction (1.0, 1.0, 1.0) (**) fglrx(0): Center Mode is disabled (==) fglrx(0): TMDS coherent mode is enabled (II) fglrx(0): Total 6 valid mode(s) found. (--) fglrx(0): Virtual size is 1280x1024 (pitch 1280) (**) fglrx(0): *Default mode "1280x1024": 157.5 MHz (scaled from 0.0 MHz), 91.1 kHz, 85.0 Hz (II) fglrx(0): Modeline "1280x1024" 157.50 1280 1344 1504 1728 1024 1025 1028 1072 +hsync +vsync (**) fglrx(0): Default mode "1152x864": 108.0 MHz (scaled from 0.0 MHz), 67.5 kHz, 75.0 Hz (II) fglrx(0): Modeline "1152x864" 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (**) fglrx(0): *Default mode "1024x768": 94.5 MHz (scaled from 0.0 MHz), 68.7 kHz, 85.0 Hz (II) fglrx(0): Modeline "1024x768" 94.50 1024 1072 1168 1376 768 769 772 808 +hsync +vsync (**) fglrx(0): Default mode "832x624": 57.3 MHz (scaled from 0.0 MHz), 49.7 kHz, 74.6 Hz (II) fglrx(0): Modeline "832x624" 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (**) fglrx(0): *Default mode "800x600": 56.3 MHz (scaled from 0.0 MHz), 53.7 kHz, 85.1 Hz (II) fglrx(0): Modeline "800x600" 56.30 800 832 896 1048 600 601 604 631 +hsync +vsync (**) fglrx(0): Default mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.5 kHz, 75.0 Hz (II) fglrx(0): Modeline "640x480" 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (--) fglrx(0): Display dimensions: (330, 250) mm (--) fglrx(0): DPI set to (98, 104) (II) Loading sub module "fb" (II) LoadModule: "fb" (II) Loading /usr/X11R6/lib/modules/libfb.a (II) Module fb: vendor="The XFree86 Project" compiled for 4.3.0.1, module version = 1.0.0 ABI class: XFree86 ANSI C Emulation, version 0.2 (II) Loading sub module "ramdac" (II) LoadModule: "ramdac" (II) Loading /usr/X11R6/lib/modules/libramdac.a (II) Module ramdac: vendor="The XFree86 Project" compiled for 4.3.0.1, module version = 0.1.0 ABI class: XFree86 Video Driver, version 0.6 (**) fglrx(0): NoAccel = NO (II) Loading sub module "xaa" (II) LoadModule: "xaa" (II) Loading /usr/X11R6/lib/modules/libxaa.a (II) Module xaa: vendor="The XFree86 Project" compiled for 4.3.0.1, module version = 1.1.0 ABI class: XFree86 Video Driver, version 0.6 (==) fglrx(0): HPV inactive (==) fglrx(0): FSAA enabled: NO (**) fglrx(0): FSAA Gamma enabled (**) fglrx(0): FSAA Multisample Position is fix (**) fglrx(0): NoDRI = NO (II) Loading sub module "fglrxdrm" (II) LoadModule: "fglrxdrm" (II) Loading /usr/X11R6/lib/modules/linux/libfglrxdrm.a (II) Module fglrxdrm: vendor="Fire GL - ATI Research GmbH, Germany" compiled for 4.3.0.1, module version = 3.14.6 ABI class: XFree86 Server Extension, version 0.2 (II) fglrx(0): Depth moves disabled by default (**) fglrx(0): Capabilities: 0x00000000 (**) fglrx(0): cpuFlags: 0x4000000f (**) fglrx(0): cpuSpeedMHz: 0x00000640 (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so" (**) fglrx(0): using built in AGPGART module: yes (**) fglrx(0): UseFastTLS=0 (**) fglrx(0): BlockSignalsOnLock=1 (==) fglrx(0): EnablePrivateBackZ = NO (--) Depth 24 pixmap format is 32 bpp (II) do I need RAC? No, I don't. (II) resource ranges after preInit: [0] 0 0 0xbf800000 - 0xbf80ffff (0x10000) MX[B] [1] 0 0 0xe0000000 - 0xefffffff (0x10000000) MX[B] [2] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [3] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [4] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [5] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [6] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [7] -1 0 0xbe000000 - 0xbe0000ff (0x100) MX[B] [8] -1 0 0xbe800000 - 0xbe8000ff (0x100) MX[B] [9] -1 0 0xf8000000 - 0xf7ffffff (0x0) MX[B]O [10] -1 0 0xdffe0000 - 0xdfffffff (0x20000) MX[B](B) [11] -1 0 0xbf800000 - 0xbf80ffff (0x10000) MX[B](B) [12] -1 0 0xe0000000 - 0xefffffff (0x10000000) MX[B](B) [13] -1 0 0xbf000000 - 0xbf00ffff (0x10000) MX[B](B) [14] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[B](B) [15] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B] [16] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B] [17] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B] [18] 0 0 0x0000d800 - 0x0000d8ff (0x100) IX[B] [19] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [20] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [21] -1 0 0x00009800 - 0x0000981f (0x20) IX[B] [22] -1 0 0x0000a000 - 0x0000a01f (0x20) IX[B] [23] -1 0 0x0000a400 - 0x0000a40f (0x10) IX[B] [24] -1 0 0x0000b000 - 0x0000b01f (0x20) IX[B] [25] -1 0 0x0000b400 - 0x0000b4ff (0x100) IX[B] [26] -1 0 0x0000b800 - 0x0000b8ff (0x100) IX[B] [27] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[B](B) [28] -1 0 0x0000a800 - 0x0000a807 (0x8) IX[B] [29] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B] [30] 0 0 0x000003c0 - 0x000003df (0x20) IS[B] (WW) fglrx(0): Cannot read colourmap from VGA. Will restore with default (II) fglrx(0): UMM area: 0xe0701000 (size=0x078ff000) (II) fglrx(0): driver needs XFree86 version: 4.3.x (II) fglrx(0): detected XFree86 version: 4.3.0 (II) Loading extension ATIFGLRXDRI (II) fglrx(0): doing DRIScreenInit drmOpenDevice: minor is 0 drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 6, (OK) drmOpenDevice: minor is 0 drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 6, (OK) drmOpenDevice: minor is 0 drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 6, (OK) drmGetBusid returned '' (II) fglrx(0): [drm] created "fglrx" driver at busid "PCI:1:0:0" (II) fglrx(0): [drm] added 8192 byte SAREA at 0xd1842000 (II) fglrx(0): [drm] mapped SAREA 0xd1842000 to 0x40277000 (II) fglrx(0): [drm] framebuffer handle = 0xe0000000 (II) fglrx(0): [drm] added 1 reserved context for kernel (II) fglrx(0): DRIScreenInit done (II) fglrx(0): Kernel Module Version Information: (II) fglrx(0): Name: fglrx (II) fglrx(0): Version: 3.14.6 (II) fglrx(0): Date: Oct 30 2004 (II) fglrx(0): Desc: ATI Fire GL DRM kernel module (II) fglrx(0): Kernel Module version matches driver. (II) fglrx(0): Kernel Module Build Time Information: (II) fglrx(0): Build-Kernel UTS_RELEASE: 2.6.3-7mdk (II) fglrx(0): Build-Kernel MODVERSIONS: no (II) fglrx(0): Build-Kernel __SMP__: no (II) fglrx(0): Build-Kernel PAGE_SIZE: 0x1000 (II) fglrx(0): [drm] register handle = 0xbf800000 (II) fglrx(0): [agp] Mode=0x1f000207 bridge: 0x1106/0x3099 (II) fglrx(0): [agp] AGP v1/2 disable mask 0x00000000 (II) fglrx(0): [agp] AGP v3 disable mask 0x00000000 (II) fglrx(0): [agp] enabling AGP with mode=0x1f000304 (II) fglrx(0): [agp] AGP protocoll is enabled for grafics board. (cmd=0x1f000304) (II) fglrx(0): [agp] grafics chipset has AGP v2.0 (II) fglrx(0): [drm] ringbuffer size = 0x00100000 bytes (II) fglrx(0): [drm] DRM buffer queue setup: nbufs = 100 bufsize = 28672 (II) fglrx(0): [drm] texture shared area handle = 0xd9db7000 (II) fglrx(0): shared FSAAScale=1 (II) fglrx(0): DRI initialization successfull! (II) fglrx(0): FBADPhys: 0xe0000000 FBMappedSize: 0x00701000 (II) fglrx(0): FBMM initialized for area (0,0)-(1280,1434) (II) fglrx(0): FBMM auto alloc for area (0,0)-(1280,1024) (front color buffer - assumption) (==) fglrx(0): Backing store disabled (==) fglrx(0): Silken mouse enabled (II) fglrx(0): Using hardware cursor (scanline 1024) (II) fglrx(0): Largest offscreen area available: 1280 x 402 (**) Option "dpms" (**) fglrx(0): DPMS enabled (II) fglrx(0): Using XFree86 Acceleration Architecture (XAA) Screen to screen bit blits Solid filled rectangles 8x8 mono pattern filled rectangles Solid Lines Dashed Lines Offscreen Pixmaps Setting up tile and stipple cache: 30 128x128 slots (II) fglrx(0): Acceleration enabled (II) fglrx(0): X context handle = 0x00000001 (II) fglrx(0): [DRI] installation complete (II) fglrx(0): Direct rendering enabled (II) Loading extension FGLRXEXTENSION (II) Loading extension ATITVOUT (==) RandR enabled (II) Setting vga for screen 0. (II) Initializing built-in extension MIT-SHM (II) Initializing built-in extension XInputExtension (II) Initializing built-in extension XTEST (II) Initializing built-in extension XKEYBOARD (II) Initializing built-in extension LBX (II) Initializing built-in extension XC-APPGROUP (II) Initializing built-in extension SECURITY (II) Initializing built-in extension XINERAMA (II) Initializing built-in extension XFree86-Bigfont (II) Initializing built-in extension RENDER (II) Initializing built-in extension RANDR (**) Option "Protocol" "ImPS/2" (**) Mouse1: Protocol: "ImPS/2" (**) Option "CorePointer" (**) Mouse1: Core Pointer (**) Option "Device" "/dev/mouse" (**) Mouse1: Emulate3Buttons, Emulate3Timeout: 50 (**) Option "ZAxisMapping" "4 5" (**) Mouse1: ZAxisMapping: buttons 4 and 5 (**) Mouse1: Buttons: 5 (II) Keyboard "Keyboard1" handled by legacy driver (II) XINPUT: Adding extended input device "Mouse1" (type: MOUSE) (II) Mouse1: ps2EnableDataReporting: succeeded Could not init font path element /usr/X11R6/lib/X11/fonts/Speedo/, removing from list! SetClientVersion: 0 7 _______________________________________________ XFree86 mailing list XFree86@xxxxxxxxxxx http://XFree86.Org/mailman/listinfo/xfree86
