hi
I am having red hat 9 with kernel version 2.4.20-6,,,i installed kernel 2.6.0 but it is giving a lot of errors and X is not starting up
log report is
_XSERVTransOpen: transport open failed for inet6/localhost.localdomain:0
_XSERVTransMakeAllCOTSServerListeners: failed to open listener for inet6
_XSERV_XSERVTransSocketOpenCOTSServer: Unable to open socket for inet6
TransSocketOpenCOTSServer: Unable to open socket for inet
_XSERVTransOpen: transport open failed for inet/localhost.localdomain:0
_XSERVTransMakeAllCOTSServerListeners: failed to open listener for inet
_XSERVTransSocketOpenCOTSServer: Unable to open socket for local
_XSERVTransOpen: transport open failed for local/localhost.localdomain:0
_XSERVTransMakeAllCOTSServerListeners: failed to open listener for local
Fatal server error:
Cannot establish any listening sockets - Make sure an X server isn't already running
When reporting a problem related to a server crash, please send
the full server output, not just the last messages.
This can be found in the log file "/var/log/XFree86.0.log".
Please report problems to xfree86@xxxxxxxxxxxx
also dmesg report is below
Linux version 2.6.6 (root@xxxxxxxxxxxxxxxxxxxxx) (gcc version 3.2.2 20030222 (Red Hat Linux 3.2.2-5)) #1 Sun Nov 14 02:24:38 IST 2004
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000000dffc000 (usable)
BIOS-e820: 000000000dffc000 - 000000000dfff000 (ACPI data)
BIOS-e820: 000000000dfff000 - 000000000e000000 (ACPI NVS)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
223MB LOWMEM available.
On node 0 totalpages: 57340
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 53244 pages, LIFO batch:12
HighMem zone: 0 pages, LIFO batch:1
DMI 2.3 present.
Built 1 zonelists
Kernel command line: ro root=LABEL=/
Initializing CPU#0
PID hash table entries: 1024 (order 10: 8192 bytes)
Detected 1533.587 MHz processor.
Using tsc for high-res timesource
Console: colour VGA+ 80x25
Memory: 224524k/229360k available (1190k kernel code, 4148k reserved, 673k data, 208k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay loop... 3031.04 BogoMIPS
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: After generic identify, caps: 0383fbff c1c3fbff 00000000 00000000
CPU: After vendor identify, caps: 0383fbff c1c3fbff 00000000 00000000
CPU: CLK_CTL MSR was 6003d22f. Reprogramming to 2003d22f
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
CPU: After all inits, caps: 0383fbff c1c3fbff 00000000 00000020
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: AMD Athlon(TM) XP 1800+ stepping 01
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
Freeing initrd memory: 84k freed
Linux NoNET1.0 for Linux 2.6
EISA bus registered
PCI: PCI BIOS revision 2.10 entry at 0xf18e0, last bus=1
mtrr: v2.0 (20020519)
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
Enabling SiS 96x SMBus.
PCI: Using IRQ router default [1039/0962] at 0000:00:02.0
PCI: IRQ 0 for device 0000:00:02.1 doesn't match PIRQ mask - try pci=usepirqmask
sisfb: Video ROM found and mapped to c00c0000
sisfb: Framebuffer at 0xf0000000, mapped to 0xce804000, size 32768k
sisfb: MMIO at 0xe7800000, mapped to 0xd0805000, size 128k
sisfb: Memory heap starting at 31744K
sisfb: Using MMIO queue mode
sisfb: CRT1 DDC supported
sisfb: CRT1 DDC level: 2
sisfb: Monitor range H 30-54KHz, V 50-120Hz, Max. dotclock 70MHz
sisfb: Default mode is 800x600x8 (60Hz)
sisfb: Initial vbflags 0x0
sisfb: Added MTRRs
sisfb: Installed SISFB_GET_INFO ioctl (80046ef8)
sisfb: Installed SISFB_GET_VBRSTATUS ioctl (80046ef9)
sisfb: 2D acceleration is enabled, scrolling mode ypan (auto-max)
fb0: SIS 740 frame buffer device, Version 1.6.25
sisfb: (C) 2001-2004 Thomas Winischhofer.
Machine check exception polling timer started.
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Using anticipatory io scheduler
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
SIS5513: IDE controller at PCI slot 0000:00:02.5
SIS5513: chipset revision 0
SIS5513: not 100% native mode: will probe irqs later
SIS5513: SiS 962/963 MuTIOL IDE UDMA133 controller
ide0: BM-DMA at 0xa400-0xa407, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xa408-0xa40f, BIOS settings: hdc:pio, hdd:pio
hda: ST340015A, ATA DISK drive
hdb: CD-ROM CMD5211, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: max request size: 128KiB
hda: 78165360 sectors (40020 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100)
hda: hda1 hda2 < hda5 hda6 hda7 hda8 hda9 hda10 hda11 hda12 >
ide-floppy driver 0.99.newide
mice: PS/2 mouse device common for all mice
serio: i8042 AUX port at 0x60,0x64 irq 12
input: ImPS/2 Generic Wheel Mouse on isa0060/serio1
serio: i8042 KBD port at 0x60,0x64 irq 1
input: AT Translated Set 2 keyboard on isa0060/serio0
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
EISA: Probing bus 0 at eisa0
BIOS EDD facility v0.13 2004-Mar-09, 1 devices found
Please report your BIOS at http://linux.dell.com/edd/results.html
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
RAMDISK: Compressed image found at block 0
VFS: Mounted root (ext2 filesystem).
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hda: dma_intr: error=0x84 { DriveStatusError BadCRC }
hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hda: dma_intr: error=0x84 { DriveStatusError BadCRC }
hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hda: dma_intr: error=0x84 { DriveStatusError BadCRC }
hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hda: dma_intr: error=0x84 { DriveStatusError BadCRC }
hdb: DMA disabled
ide0: reset: success
hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hda: dma_intr: error=0x84 { DriveStatusError BadCRC }
hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hda: dma_intr: error=0x84 { DriveStatusError BadCRC }
hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hda: dma_intr: error=0x84 { DriveStatusError BadCRC }
hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hda: dma_intr: error=0x84 { DriveStatusError BadCRC }
ide0: reset: success
Freeing unused kernel memory: 208k freed
EXT3 FS on hda7, internal journal
Adding 570268k swap on /dev/hda6. Priority:-1 extents:1
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda5, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda8, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
