Your XFree86 version is too old to support i845. If I recall correctly, it was not supported until 4.3.0. 4.4.0 is the most recent version. Mark. On Mon, 4 Oct 2004, Jagdish R.Chhailkar wrote: > > > Sir, > > I have a machine having 128MB DDR,40GB HDD and 15" Samsung's > SyncMaster 591s monitor. Out of 40GB i have partitioned 30GB as DOS & > 10GB as NON-DOS. Over the 10GB non-dos partition I am trying to load the > Red Hat Linux 8.0. I have successfully loaded the OS but unable to get > the "X". > > For the ready reference I am enclosing the complete log file > (i.e. XFree86.0.log) from /var/log and the output of the "lspci -v" > command. > > I have tried by changing the BIOS settings as follows : > > 1) On Chip Frame Buffer size : [8MB] > > 2) AGP Aperature size (MB) : [64] > > Also i have downloaded a rpm "IntelGraphics_20040607_i386.rpm" & > installed but still not getting success. > > - JAGDISH > _______________________________________________ XFree86 mailing list XFree86@xxxxxxxxxxx http://XFree86.Org/mailman/listinfo/xfree86
