TROUBLE ! with XFree86 Version 4.3.0.1 !

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hello!
I have a gentoo-linux 2004.1(pentium4) with gentoo-dev-sources ( kernel 2.6.6-rc1 ),Nvidia GeForce 2 MX 100/200 32 MB , Samsung 765 MB 1024*768*24bpp khz 30-85; hz 50-160 ! 

At me the Х-server does not want to be started, writes such mistake as: 

_________________________________________________________________
(EE) Screen(s) found, but none have a usable configuration.

Fatal server error:
no screens found 
__________________________________________________________________

My Xfree86COnfig ! :

__________________________________________________________________

# File generated by xf86config.

#
# Copyright (c) 1999 by The XFree86 Project, Inc.
#
**********************************************************************
# Refer to the XF86Config(4/5) man page for details about the format of 
# this file.
# **********************************************************************

# **********************************************************************
# Module section -- this  section  is used to specify
# which dynamically loadable modules to load.
# **********************************************************************
#
Section "Module"

# This loads the GLX extension module.

    Load        "glx"  	# NVDriver

# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
    SubSection  "extmod"
      Option    "omit xfree86-dga"   # don't initialise the DGA extension
    EndSubSection

# This loads the Type1 and FreeType font modules
    Load        "type1"
    Load        "speedo"
#    Load        "freetype"
#    Load        "xtt"

# This loads the GLX module
#    Load       "glx"
# This loads the DRI module
#    Load       "dri"

EndSection

# **********************************************************************
# Files section.  This allows default font and rgb paths to be set
# **********************************************************************

Section "Files"

# The location of the RGB database.  Note, this is the name of the
# file minus the extension (like ".txt" or ".db").  There is normally
# no need to change the default.

    RgbPath	"/usr/X11R6/lib/X11/rgb"

# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
# 
# If you don't have a floating point coprocessor and emacs, Mosaic or other
# programs take long to start up, try moving the Type1 and Speedo directory
# to the end of this list (or comment them out).
# 

    FontPath   "/usr/X11R6/lib/X11/fonts/local/"
    FontPath   "/usr/X11R6/lib/X11/fonts/misc/"
    FontPath   "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
    FontPath   "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
    FontPath   "/usr/X11R6/lib/X11/fonts/Speedo/"
    FontPath   "/usr/X11R6/lib/X11/fonts/Type1/"
#    FontPath   "/usr/X11R6/lib/X11/fonts/TrueType/"
#    FontPath   "/usr/X11R6/lib/X11/fonts/freefont/"
    FontPath   "/usr/X11R6/lib/X11/fonts/75dpi/"
    FontPath   "/usr/X11R6/lib/X11/fonts/100dpi/"

# The module search path.  The default path is shown here.

#    ModulePath "/usr/X11R6/lib/modules"

EndSection

# **********************************************************************
# Server flags section.
# **********************************************************************

Section "ServerFlags"

# Uncomment this to cause a core dump at the spot where a signal is 
# received.  This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging

#    Option "NoTrapSignals"

# Uncomment this to disable the <Crtl><Alt><Fn> VT switch sequence
# (where n is 1 through 12).  This allows clients to receive these key
# events.

#    Option "DontVTSwitch"

# Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
# This allows clients to receive this key event.

#    Option "DontZap"

# Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
# sequences.  This allows clients to receive these key events.

#    Option "Dont Zoom"

# Uncomment this to disable tuning with the xvidtune client. With
# it the client can still run and fetch card and monitor attributes,
# but it will not be allowed to change them. If it tries it will
# receive a protocol error.

#    Option "DisableVidModeExtension"

# Uncomment this to enable the use of a non-local xvidtune client. 

#    Option "AllowNonLocalXvidtune"

# Uncomment this to disable dynamically modifying the input device
# (mouse and keyboard) settings. 

#    Option "DisableModInDev"

# Uncomment this to enable the use of a non-local client to
# change the keyboard or mouse settings (currently only xset).

#    Option "AllowNonLocalModInDev"

EndSection

# **********************************************************************
# Input devices
# **********************************************************************

# **********************************************************************
# Core keyboard's InputDevice section
# **********************************************************************

Section "InputDevice"

    Identifier	"Keyboard1"
    Driver	"Keyboard"

# For most OSs the protocol can be omitted (it defaults to "Standard").
# When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
# uncomment the following line.

#    Option     "Protocol"      "Xqueue"

    Option "AutoRepeat" "500 30"

# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
#    Option	"Xleds"      "1 2 3"

#    Option "LeftAlt"     "Meta"
#    Option "RightAlt"    "ModeShift"

# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults).  For example, for a non-U.S.
# keyboard, you will probably want to use:
#    Option "XkbModel"    "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
#    Option "XkbModel"    "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
#    Option "XkbLayout"   "de"
# or:
#    Option "XkbLayout"   "de"
#    Option "XkbVariant"  "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
#    Option "XkbOptions"  "ctrl:swapcaps"

# These are the default XKB settings for XFree86
#    Option "XkbRules"    "xfree86"
#    Option "XkbModel"    "pc101"
#    Option "XkbLayout"   "us"
#    Option "XkbVariant"  ""
#    Option "XkbOptions"  ""

#    Option "XkbDisable"

    Option "XkbRules"	"xfree86"
    Option "XkbModel"	"pc102"
    Option "XkbLayout"	"ee"
    Option "XkbVariant"	"ee"
    Option "XkbOptions"	"grp:alt_shift_toggle"

EndSection


# **********************************************************************
# Core Pointer's InputDevice section
# **********************************************************************

Section "InputDevice"

# Identifier and driver

    Identifier	"Mouse1"
    Driver	"mouse"
    Option "Protocol"    "PS/2"
    Option "Device"      "/dev/mouse"

# Mouse-speed setting for PS/2 mouse.

#    Option "Resolution"	"256"

# When using XQUEUE, comment out the above two lines, and uncomment
# the following line.

#    Option "Protocol"	"Xqueue"

# Baudrate and SampleRate are only for some Logitech mice. In
# almost every case these lines should be omitted.

#    Option "BaudRate"	"9600"
#    Option "SampleRate"	"150"

# Emulate3Buttons is an option for 2-button Microsoft mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)

#    Option "Emulate3Buttons"
#    Option "Emulate3Timeout"    "50"

# ChordMiddle is an option for some 3-button Logitech mice

#    Option "ChordMiddle"

EndSection


# **********************************************************************
# Other input device sections 
# this is optional and is required only if you
# are using extended input devices.  This is for example only.  Refer
# to the XF86Config man page for a description of the options.
# **********************************************************************
#
# Section "InputDevice" 
#    Identifier  "Mouse2"
#    Driver      "mouse"
#    Option      "Protocol"      "MouseMan"
#    Option      "Device"        "/dev/mouse2"
# EndSection
#
# Section "InputDevice"
#    Identifier "spaceball"
#    Driver     "magellan"
#    Option     "Device"        "/dev/cua0"
# EndSection
#
# Section "InputDevice"
#    Identifier "spaceball2"
#    Driver     "spaceorb"
#    Option     "Device"        "/dev/cua0"
# EndSection
#
# Section "InputDevice"
#    Identifier "touchscreen0"
#    Driver     "microtouch"
#    Option     "Device"        "/dev/ttyS0"
#    Option     "MinX"          "1412"
#    Option     "MaxX"          "15184"
#    Option     "MinY"          "15372"
#    Option     "MaxY"          "1230"
#    Option     "ScreenNumber"  "0"
#    Option     "ReportingMode" "Scaled"
#    Option     "ButtonNumber"  "1"
#    Option     "SendCoreEvents"
# EndSection
#
# Section "InputDevice"
#    Identifier "touchscreen1"
#    Driver     "elo2300"
#    Option     "Device"        "/dev/ttyS0"
#    Option     "MinX"          "231"
#    Option     "MaxX"          "3868"
#    Option     "MinY"          "3858"
#    Option     "MaxY"          "272"
#    Option     "ScreenNumber"  "0"
#    Option     "ReportingMode" "Scaled"
#    Option     "ButtonThreshold"       "17"
#    Option     "ButtonNumber"  "1"
#    Option     "SendCoreEvents"
# EndSection

# **********************************************************************
# Monitor section
# **********************************************************************

# Any number of monitor sections may be present

Section "Monitor"

    Identifier  "samsung"

# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.

    HorizSync   31.5 - 82.0

#    HorizSync	30-64         # multisync
#    HorizSync	31.5, 35.2    # multiple fixed sync frequencies
#    HorizSync	15-25, 30-50  # multiple ranges of sync frequencies

# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.

    VertRefresh 40-150

EndSection


# **********************************************************************
# Graphics device section
# **********************************************************************

# Any number of graphics device sections may be present

# Standard VGA Device:

Section "Device"
    Identifier	"NVIDIA GeForce"
    VendorName	"nv"
    BoardName	"nv"

# The chipset line is optional in most cases.  It can be used to override
# the driver's chipset detection, and should not normally be specified.

#    Chipset	"nv"

# The Driver line must be present.  When using run-time loadable driver
# modules, this line instructs the server to load the specified driver
# module.  Even when not using loadable driver modules, this line
# indicates which driver should interpret the information in this section.

    Driver     "nvidia"
# The BusID line is used to specify which of possibly multiple devices
# this section is intended for.  When this line isn't present, a device
# section can only match up with the primary video device.  For PCI
# devices a line like the following could be used.  This line should not
# normally be included unless there is more than one video device
# intalled.

#    BusID      "PCI:0:10:0"

#    VideoRam	32768

#    Clocks	25.2 28.3

EndSection

# Device configured by xf86config:

Section "Device"
    Identifier  "nvidia"
    Driver      "vga"
	# unsupported card
    #VideoRam    32768
    # Insert Clocks lines here if appropriate
EndSection


# **********************************************************************
# Screen sections
# **********************************************************************

# Any number of screen sections may be present.  Each describes
# the configuration of a single screen.  A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.
Section "Screen"
    Identifier  "Screen 1"
    Device      "nvidia"
    Monitor     "samsung"
    DefaultDepth 24

    Subsection "Display"
        Depth       24
        Modes       "1280x1024" "1024x768" "800x600" "640x480"
        ViewPort    0 0
    EndSubsection
    Subsection "Display"
        Depth       24
        Modes       "1280x1024" "1024x768" "800x600" "640x480"
        ViewPort    0 0
    EndSubsection
    Subsection "Display"
        Depth       24
        Modes       "1280x1024" "1024x768" "800x600" "640x480"
        ViewPort    0 0
    EndSubsection
EndSection

# **********************************************************************
# ServerLayout sections.
# **********************************************************************

# Any number of ServerLayout sections may be present.  Each describes
# the way multiple screens are organised.  A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option.  In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.

Section "ServerLayout"

# The Identifier line must be present
    Identifier  "Simple Layout"

# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens.  The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen.  In this example, screen 2 is located to the
# right of screen 1.

    Screen "Screen 1"

# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used.  Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".

    InputDevice "Mouse1" "CorePointer"
    InputDevice "Keyboard1" "CoreKeyboard"

EndSection

# Section "DRI"
#    Mode 0666
# EndSection
 
___________________________________________________________________


My Xfree86.0.log :
__________________________________________________________________
This is a pre-release version of XFree86, and is not supported in any
way.  Bugs may be reported to XFree86@xxxxxxxxxxx and patches submitted
to fixes@xxxxxxxxxxxx  Before reporting bugs in pre-release versions,
please check the latest version in the XFree86 CVS repository
(http://www.XFree86.Org/cvs).

XFree86 Version 4.3.0.1
Release Date: 15 August 2003
X Protocol Version 11, Revision 0, Release 6.6
Build Operating System: Linux 2.6.6-rc1 i686 [ELF] 
Build Date: 01 May 2004
	Before reporting problems, check http://www.XFree86.Org/
	to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
         (++) from command line, (!!) notice, (II) informational,
         (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/XFree86.0.log", Time: Sat May  1 17:52:47 2004
(==) Using config file: "/etc/X11/XF86Config"
(==) ServerLayout "Simple Layout"
(**) |-->Screen "Screen 1" (0)
(**) |   |-->Monitor "samsung"
(**) |   |-->Device "nvidia"
(**) |-->Input Device "Mouse1"
(**) |-->Input Device "Keyboard1"
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xfree86"
(**) XKB: rules: "xfree86"
(**) Option "XkbModel" "pc102"
(**) XKB: model: "pc102"
(**) Option "XkbLayout" "ee"
(**) XKB: layout: "ee"
(**) Option "XkbVariant" "ee"
(**) XKB: variant: "ee"
(**) Option "XkbOptions" "grp:alt_shift_toggle"
(**) XKB: options: "grp:alt_shift_toggle"
(==) Keyboard: CustomKeycode disabled
(**) FontPath set to "/usr/X11R6/lib/X11/fonts/local/,/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/75dpi/:unscaled,/usr/X11R6/lib/X11/fonts/100dpi/:unscaled,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/"
(**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(==) ModulePath set to "/usr/X11R6/lib/modules"
Using vt 7
(--) using VT number 7

(WW) Open APM failed (/dev/apm_bios) (No such file or directory)
(II) Module ABI versions:
	XFree86 ANSI C Emulation: 0.2
	XFree86 Video Driver: 0.6
	XFree86 XInput driver : 0.4
	XFree86 Server Extension : 0.2
	XFree86 Font Renderer : 0.4
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="The XFree86 Project"
	compiled for 4.3.0.1, module version = 1.0.0
	Module class: XFree86 Font Renderer
	ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="The XFree86 Project"
	compiled for 4.3.0.1, module version = 1.0.0
	ABI class: XFree86 Video Driver, version 0.6
(II) PCI: Probing config type using method 1
(II) PCI: Config type is 1
(II) PCI: stages = 0x03, oldVal1 = 0x00000000, mode1Res1 = 0x80000000
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 1106,3128 card 1019,0a75 rev 01 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 1106,b091 card 0000,0000 rev 00 class 06,04,00 hdr 01
(II) PCI: 00:09:0: chip 10ec,8139 card 1432,9503 rev 10 class 02,00,00 hdr 00
(II) PCI: 00:11:0: chip 1106,3147 card 1019,0a75 rev 00 class 06,01,00 hdr 80
(II) PCI: 00:11:1: chip 1106,0571 card 1106,0571 rev 06 class 01,01,8a hdr 00
(II) PCI: 00:11:2: chip 1106,3038 card 0925,1234 rev 23 class 0c,03,00 hdr 00
(II) PCI: 00:11:3: chip 1106,3038 card 0925,1234 rev 23 class 0c,03,00 hdr 00
(II) PCI: 00:11:5: chip 1106,3059 card 1019,0a75 rev 40 class 04,01,00 hdr 00
(II) PCI: 01:00:0: chip 10de,0111 card 0000,0000 rev b2 class 03,00,00 hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,1), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
	[0] -1	0	0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
	[0] -1	0	0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
	[0] -1	0	0x00000000 - 0xffffffff (0x0) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x000c (VGA_EN is set)
(II) Bus 1 non-prefetchable memory range:
	[0] -1	0	0xec000000 - 0xedffffff (0x2000000) MX[B]
(II) Bus 1 prefetchable memory range:
	[0] -1	0	0xe0000000 - 0xe7ffffff (0x8000000) MX[B]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:17:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(--) PCI:*(1:0:0) nVidia Corporation NV11DDR [GeForce2 MX 100 DDR/200 DDR] rev 178, Mem @ 0xec000000/24, 0xe0000000/27
(II) Addressable bus resource ranges are
	[0] -1	0	0x00000000 - 0xffffffff (0x0) MX[B]
	[1] -1	0	0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
	[0] -1	0	0xffe00000 - 0xffffffff (0x200000) MX[B](B)
	[1] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[2] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[3] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[4] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[5] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[6] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
(II) PCI Memory resource overlap reduced 0xe8000000 from 0xebffffff to 0xe7ffffff
(II) Active PCI resource ranges:
	[0] -1	0	0xee000000 - 0xee0000ff (0x100) MX[B]
	[1] -1	0	0xe8000000 - 0xe7ffffff (0x0) MX[B]O
	[2] -1	0	0xe0000000 - 0xe7ffffff (0x8000000) MX[B](B)
	[3] -1	0	0xec000000 - 0xecffffff (0x1000000) MX[B](B)
	[4] -1	0	0x0000e000 - 0x0000e0ff (0x100) IX[B]
	[5] -1	0	0x0000dc00 - 0x0000dc1f (0x20) IX[B]
	[6] -1	0	0x0000d800 - 0x0000d81f (0x20) IX[B]
	[7] -1	0	0x0000d400 - 0x0000d40f (0x10) IX[B]
	[8] -1	0	0x0000d000 - 0x0000d0ff (0x100) IX[B]
(II) Active PCI resource ranges after removing overlaps:
	[0] -1	0	0xee000000 - 0xee0000ff (0x100) MX[B]
	[1] -1	0	0xe8000000 - 0xe7ffffff (0x0) MX[B]O
	[2] -1	0	0xe0000000 - 0xe7ffffff (0x8000000) MX[B](B)
	[3] -1	0	0xec000000 - 0xecffffff (0x1000000) MX[B](B)
	[4] -1	0	0x0000e000 - 0x0000e0ff (0x100) IX[B]
	[5] -1	0	0x0000dc00 - 0x0000dc1f (0x20) IX[B]
	[6] -1	0	0x0000d800 - 0x0000d81f (0x20) IX[B]
	[7] -1	0	0x0000d400 - 0x0000d40f (0x10) IX[B]
	[8] -1	0	0x0000d000 - 0x0000d0ff (0x100) IX[B]
(II) OS-reported resource ranges after removing overlaps with PCI:
	[0] -1	0	0xffe00000 - 0xffffffff (0x200000) MX[B](B)
	[1] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[2] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[3] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[4] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[5] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[6] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
	[0] -1	0	0xffe00000 - 0xffffffff (0x200000) MX[B](B)
	[1] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[2] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[3] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[4] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[5] -1	0	0xee000000 - 0xee0000ff (0x100) MX[B]
	[6] -1	0	0xe8000000 - 0xe7ffffff (0x0) MX[B]O
	[7] -1	0	0xe0000000 - 0xe7ffffff (0x8000000) MX[B](B)
	[8] -1	0	0xec000000 - 0xecffffff (0x1000000) MX[B](B)
	[9] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[10] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
	[11] -1	0	0x0000e000 - 0x0000e0ff (0x100) IX[B]
	[12] -1	0	0x0000dc00 - 0x0000dc1f (0x20) IX[B]
	[13] -1	0	0x0000d800 - 0x0000d81f (0x20) IX[B]
	[14] -1	0	0x0000d400 - 0x0000d40f (0x10) IX[B]
	[15] -1	0	0x0000d000 - 0x0000d0ff (0x100) IX[B]
(II) LoadModule: "glx"
(II) Loading /usr/X11R6/lib/modules/extensions/libglx.so
(II) Module glx: vendor="NVIDIA Corporation"
	compiled for 4.0.2, module version = 1.0.4496
	Module class: XFree86 Server Extension
	ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension GLX
(II) LoadModule: "extmod"
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="The XFree86 Project"
	compiled for 4.3.0.1, module version = 1.0.0
	Module class: XFree86 Server Extension
	ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension DPMS
(II) Loading extension FontCache
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "type1"
(II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
(II) Module type1: vendor="The XFree86 Project"
	compiled for 4.3.0.1, module version = 1.0.2
	Module class: XFree86 Font Renderer
	ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font Type1
(II) Loading font CID
(II) LoadModule: "speedo"
(II) Loading /usr/X11R6/lib/modules/fonts/libspeedo.a
(II) Module speedo: vendor="The XFree86 Project"
	compiled for 4.3.0.1, module version = 1.0.1
	Module class: XFree86 Font Renderer
	ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font Speedo
(II) LoadModule: "vga"
(II) Loading /usr/X11R6/lib/modules/drivers/vga_drv.o
(II) Module vga: vendor="The XFree86 Project"
	compiled for 4.3.0.1, module version = 4.0.0
	Module class: XFree86 Video Driver
	ABI class: XFree86 Video Driver, version 0.6
(II) LoadModule: "mouse"
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="The XFree86 Project"
	compiled for 4.3.0.1, module version = 1.0.0
	Module class: XFree86 XInput Driver
	ABI class: XFree86 XInput driver, version 0.4
(II) VGA: Generic VGA driver (version 4.0) for chipsets: generic
(II) Primary Device is: PCI 01:00:0
(--) Assigning device section with no busID to primary device
(--) Chipset generic found
(II) resource ranges after xf86ClaimFixedResources() call:
	[0] -1	0	0xffe00000 - 0xffffffff (0x200000) MX[B](B)
	[1] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[2] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[3] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[4] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[5] -1	0	0xee000000 - 0xee0000ff (0x100) MX[B]
	[6] -1	0	0xe8000000 - 0xe7ffffff (0x0) MX[B]O
	[7] -1	0	0xe0000000 - 0xe7ffffff (0x8000000) MX[B](B)
	[8] -1	0	0xec000000 - 0xecffffff (0x1000000) MX[B](B)
	[9] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[10] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
	[11] -1	0	0x0000e000 - 0x0000e0ff (0x100) IX[B]
	[12] -1	0	0x0000dc00 - 0x0000dc1f (0x20) IX[B]
	[13] -1	0	0x0000d800 - 0x0000d81f (0x20) IX[B]
	[14] -1	0	0x0000d400 - 0x0000d40f (0x10) IX[B]
	[15] -1	0	0x0000d000 - 0x0000d0ff (0x100) IX[B]
(II) resource ranges after probing:
	[0] -1	0	0xffe00000 - 0xffffffff (0x200000) MX[B](B)
	[1] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[2] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[3] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[4] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[5] -1	0	0xee000000 - 0xee0000ff (0x100) MX[B]
	[6] -1	0	0xe8000000 - 0xe7ffffff (0x0) MX[B]O
	[7] -1	0	0xe0000000 - 0xe7ffffff (0x8000000) MX[B](B)
	[8] -1	0	0xec000000 - 0xecffffff (0x1000000) MX[B](B)
	[9] 0	0	0x000a0000 - 0x000affff (0x10000) MS[B]
	[10] 0	0	0x000b0000 - 0x000b7fff (0x8000) MS[B]
	[11] 0	0	0x000b8000 - 0x000bffff (0x8000) MS[B]
	[12] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[13] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
	[14] -1	0	0x0000e000 - 0x0000e0ff (0x100) IX[B]
	[15] -1	0	0x0000dc00 - 0x0000dc1f (0x20) IX[B]
	[16] -1	0	0x0000d800 - 0x0000d81f (0x20) IX[B]
	[17] -1	0	0x0000d400 - 0x0000d40f (0x10) IX[B]
	[18] -1	0	0x0000d000 - 0x0000d0ff (0x100) IX[B]
	[19] 0	0	0x000003b0 - 0x000003bb (0xc) IS[B]
	[20] 0	0	0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/X11R6/lib/modules/linux/libint10.a
(II) Module int10: vendor="The XFree86 Project"
	compiled for 4.3.0.1, module version = 1.0.0
	ABI class: XFree86 Video Driver, version 0.6
(II) VGA(0): initializing int10.
(II) VGA(0): Primary V_BIOS segment is: 0xc000
(EE) VGA(0): Driver can't support depth 24
(II) UnloadModule: "vga"
(II) UnloadModule: "int10"
(II) Unloading /usr/X11R6/lib/modules/linux/libint10.a
(EE) Screen(s) found, but none have a usable configuration.

Fatal server error:
no screens found

When reporting a problem related to a server crash, please send
the full server output, not just the last messages.
This can be found in the log file "/var/log/XFree86.0.log".
Please report problems to xfree86@xxxxxxxxxxxx
__________________________________________________________________





-----------------------------------------
Hot Mobiil - helinad, logod ja piltsõnumid!
http://portal.hot.ee

_______________________________________________
XFree86 mailing list
XFree86@xxxxxxxxxxx
http://XFree86.Org/mailman/listinfo/xfree86

[Index of Archives]     [X Forum]     [Xorg]     [XFree86 Newbie]     [IETF Announce]     [Security]     [Font Config]     [Bugtraq]     [Yosemite]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux Kernel]

  Powered by Linux