I have problem running my Cirrus Logic
card at 800x600 and 16-bit color.
Below I attatch my XFree config file
and report. System Debian Sarge.
I can use 640x380@24bit or 1024x768@8bit .
But there is no way to use
800x600 with 16bit color.
Section "Files"
RgbPath "/usr/X11R6/lib/X11/rgb"
ModulePath "/usr/X11R6/lib/modules"
FontPath "/usr/X11R6/lib/X11/fonts/misc/"
FontPath "/usr/X11R6/lib/X11/fonts/Speedo/"
FontPath "/usr/X11R6/lib/X11/fonts/Type1/"
FontPath "/usr/X11R6/lib/X11/fonts/CID/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "keyboard"
Option "CoreKeyboard"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/psaux"
Option "Protocol" "PS/2"
Option "Emulate3Buttons" "true"
Option "ZAxisMapping" "4 5"
EndSection
Section "Device"
Identifier "asdfmyc"
Driver "cirrus"
EndSection
Section "Monitor"
Identifier "mymon"
HorizSync 30-70
VertRefresh 20-160
EndSection
Section "Screen"
Identifier "Default Screen"
Device "asdfmyc"
Monitor "mymon"
DefaultDepth 16
SubSection "Display"
Depth 8
Modes "1024x768"
EndSubSection
SubSection "Display"
Depth 16
Modes "800x600"
EndSubSection
SubSection "Display"
Depth 24
Modes "640x480"
EndSubSection
EndSection
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
EndSection
XFree86 Version 4.3.0.1 (Debian 4.3.0-7 20040318043201
root@xxxxxxxxxxxxxxxxxxxxxxxxxxxxx)
Release Date: 15 August 2003
X Protocol Version 11, Revision 0, Release 6.6
Build Operating System: Linux 2.6.4 i686 [ELF]
Build Date: 18 March 2004
Before reporting problems, check http://www.XFree86.Org/
to make sure that you have the latest version.
Module Loader present
OS Kernel: Linux version 2.2.20-idepci (herbert@gondolin) (gcc version
2.7.2.3) #1 Sat Apr 20 12:45:19 EST 2002 TF
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/XFree86.0.log", Time: Fri Apr 16 00:57:20 2004
(==) Using config file: "/etc/X11/XF86Config-4"
(==) ServerLayout "Default Layout"
(**) |-->Screen "Default Screen" (0)
(**) | |-->Monitor "mymon"
(**) | |-->Device "asdfmyc"
(**) |-->Input Device "Generic Keyboard"
(==) Keyboard: CustomKeycode disabled
(**) |-->Input Device "Configured Mouse"
(WW) The directory "/usr/X11R6/lib/X11/fonts/CID/" does not exist.
Entry deleted from font path.
(**) FontPath set to
"/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/
lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/font
s/100dpi/"
(**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(**) ModulePath set to "/usr/X11R6/lib/modules"
(++) using VT number 7
(WW) Open APM failed (/dev/apm_bios) (No such device)
(II) Module ABI versions:
XFree86 ANSI C Emulation: 0.2
XFree86 Video Driver: 0.6
XFree86 XInput driver : 0.4
XFree86 Server Extension : 0.2
XFree86 Font Renderer : 0.4
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.6
(II) PCI: Probing config type using method 1
(II) PCI: Config type is 1
(II) PCI: stages = 0x03, oldVal1 = 0x00000000, mode1Res1 = 0x80000000
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 8086,1250 card 0000,0000 rev 03 class 06,00,00 hdr
00
(II) PCI: 00:02:0: chip 10ec,8139 card 1432,9503 rev 10 class 02,00,00 hdr
00
(II) PCI: 00:07:0: chip 8086,7000 card 0000,0000 rev 01 class 06,01,00 hdr
80
(II) PCI: 00:07:1: chip 8086,7010 card 0000,0000 rev 00 class 01,01,80 hdr
00
(II) PCI: 00:0f:0: chip 1013,00ac card 0000,0000 rev 00 class 03,00,00 hdr
00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,0), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:7:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(--) PCI:*(0:15:0) Cirrus Logic GD 5436 [Alpine] rev 0, Mem @ 0x40000000/24
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) Active PCI resource ranges:
[0] -1 0 0x41000000 - 0x41ffffff (0x1000000) MX[B]E
[1] -1 0 0x40000000 - 0x40ffffff (0x1000000) MX[B](B)
[2] -1 0 0x00001400 - 0x000014ff (0x100) IX[B]E
[3] -1 0 0x00001000 - 0x000010ff (0x100) IX[B]E
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0x41000000 - 0x41ffffff (0x1000000) MX[B]E
[1] -1 0 0x40000000 - 0x40ffffff (0x1000000) MX[B](B)
[2] -1 0 0x00001400 - 0x000014ff (0x100) IX[B]E
[3] -1 0 0x00001000 - 0x000010ff (0x100) IX[B]E
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x41000000 - 0x41ffffff (0x1000000) MX[B]E
[6] -1 0 0x40000000 - 0x40ffffff (0x1000000) MX[B](B)
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[8] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[9] -1 0 0x00001400 - 0x000014ff (0x100) IX[B]E
[10] -1 0 0x00001000 - 0x000010ff (0x100) IX[B]E
(II) LoadModule: "cirrus"
(II) Loading /usr/X11R6/lib/modules/drivers/cirrus_drv.o
(II) Module cirrus: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
Module class: XFree86 Video Driver
ABI class: XFree86 Video Driver, version 0.6
(II) LoadModule: "mouse"
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
Module class: XFree86 XInput Driver
ABI class: XFree86 XInput driver, version 0.4
(II) CIRRUS: driver for Cirrus chipsets: CLGD5430, CLGD5434-4, CLGD5434-8,
CLGD5436, CLGD5446, CLGD5480, CL-GD5462, CL-GD5464, CL-GD5464BD,
CL-GD5465, CL-GD7548
(II) Primary Device is: PCI 00:0f:0
(--) Assigning device section with no busID to primary device
(--) Chipset CLGD5436 found
(II) Loading sub module "cirrus_alpine"
(II) LoadModule: "cirrus_alpine"
(II) Loading /usr/X11R6/lib/modules/drivers/cirrus_alpine.o
(II) Module cirrus_alpine: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.6
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x41000000 - 0x41ffffff (0x1000000) MX[B]E
[6] -1 0 0x40000000 - 0x40ffffff (0x1000000) MX[B](B)
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[8] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[9] -1 0 0x00001400 - 0x000014ff (0x100) IX[B]E
[10] -1 0 0x00001000 - 0x000010ff (0x100) IX[B]E
(II) resource ranges after probing:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x41000000 - 0x41ffffff (0x1000000) MX[B]E
[6] -1 0 0x40000000 - 0x40ffffff (0x1000000) MX[B](B)
[7] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[8] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[9] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[10] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[11] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[12] -1 0 0x00001400 - 0x000014ff (0x100) IX[B]E
[13] -1 0 0x00001000 - 0x000010ff (0x100) IX[B]E
[14] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[15] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/X11R6/lib/modules/libvgahw.a
(II) Module vgahw: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.6
(II) CIRRUS(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is
0x0000
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/X11R6/lib/modules/linux/libint10.a
(II) Module int10: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.6
(II) CIRRUS(0): initializing int10
(II) CIRRUS(0): Primary V_BIOS segment is: 0xc000
(WW) System lacks support for changing MTRRs
(**) CIRRUS(0): Depth 16, (--) framebuffer bpp 16
(==) CIRRUS(0): RGB weight 565
(==) CIRRUS(0): Default visual is TrueColor
(==) CIRRUS(0): Using SW cursor
(--) CIRRUS(0): Linear framebuffer at 0x40000000
(EE) CIRRUS(0): No valid MMIO address in PCI config space
(--) CIRRUS(0): Not Using MMIO
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Loading /usr/X11R6/lib/modules/libi2c.a
(II) Module i2c: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.2.0
ABI class: XFree86 Video Driver, version 0.6
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Loading /usr/X11R6/lib/modules/libddc.a
(II) Module ddc: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.6
(EE) CIRRUS(0): I2C initialization failed
(==) CIRRUS(0): Using gamma correction (1.0, 1.0, 1.0)
(--) CIRRUS(0): Memory Config reg 1 is 0x11
(--) CIRRUS(0): Memory Config reg 2 is 0x21
(--) CIRRUS(0): VideoRAM: 1024 kByte
(==) CIRRUS(0): Min pixel clock is 12 MHz
(--) CIRRUS(0): Max pixel clock is 50 MHz
(II) CIRRUS(0): mymon: Using hsync range of 30.00-70.00 kHz
(II) CIRRUS(0): mymon: Using vrefresh range of 20.00-160.00 Hz
(II) CIRRUS(0): Clock range: 12.00 to 50.00 MHz
(II) CIRRUS(0): Not using default mode "320x175" (bad mode
clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "320x200" (bad mode
clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "360x200" (bad mode
clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "320x240" (bad mode
clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "320x240" (bad mode
clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "320x240" (bad mode
clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "320x240" (bad mode
clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "400x300" (bad mode
clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "400x300" (bad mode
clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "400x300" (bad mode
clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "400x300" (bad mode
clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "800x600" (bad mode
clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "400x300" (bad mode
clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "1024x768" (insufficient memory for
mode)
(II) CIRRUS(0): Not using default mode "512x384" (bad mode
clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "1024x768" (insufficient memory for
mode)
(II) CIRRUS(0): Not using default mode "512x384" (bad mode
clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "1024x768" (insufficient memory for
mode)
(II) CIRRUS(0): Not using default mode "512x384" (bad mode
clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "1024x768" (insufficient memory for
mode)
(II) CIRRUS(0): Not using default mode "512x384" (bad mode
clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "1024x768" (insufficient memory for
mode)
(II) CIRRUS(0): Not using default mode "512x384" (bad mode
clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "1152x864" (insufficient memory for
mode)
(II) CIRRUS(0): Not using default mode "576x432" (bad mode
clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "1280x960" (insufficient memory for
mode)
(II) CIRRUS(0): Not using default mode "640x480" (bad mode
clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "1280x960" (insufficient memory for
mode)
(II) CIRRUS(0): Not using default mode "640x480" (bad mode
clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "1280x1024" (insufficient memory for
mode)
(II) CIRRUS(0): Not using default mode "640x512" (bad mode
clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "1280x1024" (insufficient memory for
mode)
(II) CIRRUS(0): Not using default mode "640x512" (bad mode
clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "1280x1024" (insufficient memory for
mode)
(II) CIRRUS(0): Not using default mode "640x512" (bad mode
clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "1600x1200" (insufficient memory for
mode)
(II) CIRRUS(0): Not using default mode "800x600" (bad mode
clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "1600x1200" (insufficient memory for
mode)
(II) CIRRUS(0): Not using default mode "800x600" (bad mode
clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "1600x1200" (insufficient memory for
mode)
(II) CIRRUS(0): Not using default mode "800x600" (bad mode
clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "1600x1200" (insufficient memory for
mode)
(II) CIRRUS(0): Not using default mode "800x600" (bad mode
clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "1600x1200" (insufficient memory for
mode)
(II) CIRRUS(0): Not using default mode "800x600" (bad mode
clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "1792x1344" (insufficient memory for
mode)
(II) CIRRUS(0): Not using default mode "896x672" (insufficient memory for
mode)
(II) CIRRUS(0): Not using default mode "1792x1344" (insufficient memory for
mode)
(II) CIRRUS(0): Not using default mode "896x672" (insufficient memory for
mode)
(II) CIRRUS(0): Not using default mode "1856x1392" (insufficient memory for
mode)
(II) CIRRUS(0): Not using default mode "928x696" (insufficient memory for
mode)
(II) CIRRUS(0): Not using default mode "1856x1392" (insufficient memory for
mode)
(II) CIRRUS(0): Not using default mode "928x696" (insufficient memory for
mode)
(II) CIRRUS(0): Not using default mode "1920x1440" (insufficient memory for
mode)
(II) CIRRUS(0): Not using default mode "960x720" (insufficient memory for
mode)
(II) CIRRUS(0): Not using default mode "1920x1440" (insufficient memory for
mode)
(II) CIRRUS(0): Not using default mode "960x720" (insufficient memory for
mode)
(II) CIRRUS(0): Not using default mode "832x624" (bad mode
clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "416x312" (bad mode
clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "1152x768" (insufficient memory for
mode)
(II) CIRRUS(0): Not using default mode "576x384" (bad mode
clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "1400x1050" (insufficient memory for
mode)
(II) CIRRUS(0): Not using default mode "700x525" (bad mode
clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "1400x1050" (insufficient memory for
mode)
(II) CIRRUS(0): Not using default mode "700x525" (bad mode
clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "1600x1024" (insufficient memory for
mode)
(II) CIRRUS(0): Not using default mode "800x512" (bad mode
clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "1920x1440" (insufficient memory for
mode)
(II) CIRRUS(0): Not using default mode "960x720" (insufficient memory for
mode)
(II) CIRRUS(0): Not using default mode "2048x1536" (insufficient memory for
mode)
(II) CIRRUS(0): Not using default mode "1024x768" (insufficient memory for
mode)
(II) CIRRUS(0): Not using default mode "2048x1536" (insufficient memory for
mode)
(II) CIRRUS(0): Not using default mode "1024x768" (insufficient memory for
mode)
(II) CIRRUS(0): Not using default mode "2048x1536" (insufficient memory for
mode)
(II) CIRRUS(0): Not using default mode "1024x768" (insufficient memory for
mode)
(II) CIRRUS(0): Not using default mode "800x600" (insufficient memory given
virtual size)
(II) CIRRUS(0): Not using default mode "800x600" (insufficient memory given
virtual size)
(II) CIRRUS(0): Not using default mode "800x600" (insufficient memory given
virtual size)
(II) CIRRUS(0): Not using default mode "800x600" (insufficient memory given
virtual size)
(II) CIRRUS(0): Not using default mode "720x400" (width too large for
virtual size)
(--) CIRRUS(0): Virtual size is 640x480 (pitch 640)
(**) CIRRUS(0): Default mode "640x480": 36.0 MHz, 43.3 kHz, 85.0 Hz
(II) CIRRUS(0): Modeline "640x480" 36.00 640 696 752 832 480 481 484
509 -hsync -vsync
(**) CIRRUS(0): Default mode "640x480": 31.5 MHz, 37.5 kHz, 75.0 Hz
(II) CIRRUS(0): Modeline "640x480" 31.50 640 656 720 840 480 481 484
500 -hsync -vsync
(**) CIRRUS(0): Default mode "640x480": 31.5 MHz, 37.9 kHz, 72.8 Hz
(II) CIRRUS(0): Modeline "640x480" 31.50 640 664 704 832 480 489 491
520 -hsync -vsync
(**) CIRRUS(0): Default mode "640x480": 25.2 MHz, 31.5 kHz, 60.0 Hz
(II) CIRRUS(0): Modeline "640x480" 25.20 640 656 752 800 480 490 492
525 -hsync -vsync
(**) CIRRUS(0): Default mode "640x400": 31.5 MHz, 37.9 kHz, 85.1 Hz
(II) CIRRUS(0): Modeline "640x400" 31.50 640 672 736 832 400 401 404
445 -hsync +vsync
(**) CIRRUS(0): Default mode "640x350": 31.5 MHz, 37.9 kHz, 85.1 Hz
(II) CIRRUS(0): Modeline "640x350" 31.50 640 672 736 832 350 382 385 445
+hsync -vsync
(==) CIRRUS(0): DPI set to (75, 75)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/X11R6/lib/modules/libfb.a
(II) Module fb: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
ABI class: XFree86 ANSI C Emulation, version 0.2
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/X11R6/lib/modules/libxaa.a
(II) Module xaa: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.1.0
ABI class: XFree86 Video Driver, version 0.6
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] 0 0 0x40000000 - 0x40ffffff (0x1000000) MX[B]
[1] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[2] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[3] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[4] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[5] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[6] -1 0 0x41000000 - 0x41ffffff (0x1000000) MX[B]E
[7] -1 0 0x40000000 - 0x40ffffff (0x1000000) MX[B](B)
[8] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprU)
[9] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprU)
[10] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprU)
[11] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[12] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[13] -1 0 0x00001400 - 0x000014ff (0x100) IX[B]E
[14] -1 0 0x00001000 - 0x000010ff (0x100) IX[B]E
[15] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[16] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) CIRRUS(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is
0x0000
(II) CIRRUS(0): Using 339 lines for offscreen memory
(II) CIRRUS(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
Solid Horizontal and Vertical Lines
(==) CIRRUS(0): Silken mouse enabled
(==) RandR enabled
(II) Setting vga for screen 0.
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension LBX
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Keyboard "Generic Keyboard" handled by legacy driver
(**) Option "Protocol" "PS/2"
(**) Configured Mouse: Protocol: "PS/2"
(**) Option "CorePointer"
(**) Configured Mouse: Core Pointer
(**) Option "Device" "/dev/psaux"
(**) Option "Emulate3Buttons" "true"
(**) Configured Mouse: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5"
(**) Configured Mouse: ZAxisMapping: buttons 4 and 5
(**) Configured Mouse: Buttons: 5
(II) XINPUT: Adding extended input device "Configured Mouse" (type: MOUSE)
(II) Configured Mouse: ps2EnableDataReporting: succeeded
Could not init font path element /usr/X11R6/lib/X11/fonts/Speedo/, removing
from list!
Could not init font path element /usr/X11R6/lib/X11/fonts/Type1/, removing
from list!
_______________________________________________
XFree86 mailing list
XFree86@xxxxxxxxxxx
http://XFree86.Org/mailman/listinfo/xfree86
