--- Begin Message ---
Folks:
OS: FreeBSD 4.9
X : 4.3.0
HW: PPro @ 200MHz, 96MB RAM, 4 Gig HD,
video card = STB Nitro 3D with 4 MB
Symptomes: striking <Enter>, when in X, produces
the same effect as entering Ctrl-Del-+,
it causes the screen's resolution to change.
I have been running FreeBSD 4.3 for over a year
on this box, so I know the hardware is ok. On 4.9,
I am using lesstif, not so when I ws running 4.3.
HOWEVER, bringing up X, without the window manager,
produces the same symptomes.
Using the FreeBSD "sysinstall' utility, I have
tried three different key maps, with no difference
in effect:
USA ISO <==> us.iso
USA CAPSLOCK-CTRL <==> us.pc-ctrl
no key map <==> NO
The right hand side lists the value written to rc.conf.
The environmental var XKEYSYMDB is set to:
/usr/X11R6/lib/X11/XkeysysDB,
which is, indeed, the file's location.
At this point, I'm not sure what to do next.
Attached are the XFree86 config file, the XFree86 log
and the output of the "startx" command. If anything
else is needed, please let me know.
Thanks,
August
ursamax@xxxxxxxxxxxxx
# File generated by xf86config.
#
# Copyright (c) 1999 by The XFree86 Project, Inc.
#
# Permission is hereby granted, free of charge, to any person obtaining a
# copy of this software and associated documentation files (the "Software"),
# to deal in the Software without restriction, including without limitation
# the rights to use, copy, modify, merge, publish, distribute, sublicense,
# and/or sell copies of the Software, and to permit persons to whom the
# Software is furnished to do so, subject to the following conditions:
#
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
#
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
# THE XFREE86 PROJECT BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
# WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
# OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
# SOFTWARE.
#
# Except as contained in this notice, the name of the XFree86 Project shall
# not be used in advertising or otherwise to promote the sale, use or other
# dealings in this Software without prior written authorization from the
# XFree86 Project.
#
# **********************************************************************
# Refer to the XF86Config(4/5) man page for details about the format of
# this file.
# **********************************************************************
# **********************************************************************
# Module section -- this section is used to specify
# which dynamically loadable modules to load.
# **********************************************************************
#
Section "Module"
# This loads the DBE extension module.
Load "dbe" # Double buffer extension
# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
SubSection "extmod"
Option "omit xfree86-dga" # don't initialise the DGA extension
EndSubSection
# This loads the Type1 and FreeType font modules
Load "type1"
Load "speedo"
# Load "freetype"
# Load "xtt"
# This loads the GLX module
# Load "glx"
# This loads the DRI module
# Load "dri"
EndSection
# **********************************************************************
# Files section. This allows default font and rgb paths to be set
# **********************************************************************
Section "Files"
# The location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.
RgbPath "/usr/X11R6/lib/X11/rgb"
# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
#
# If you don't have a floating point coprocessor and emacs, Mosaic or other
# programs take long to start up, try moving the Type1 and Speedo directory
# to the end of this list (or comment them out).
#
FontPath "/usr/X11R6/lib/X11/fonts/local/"
FontPath "/usr/X11R6/lib/X11/fonts/misc/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/Speedo/"
FontPath "/usr/X11R6/lib/X11/fonts/Type1/"
# FontPath "/usr/X11R6/lib/X11/fonts/TrueType/"
# FontPath "/usr/X11R6/lib/X11/fonts/freefont/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/"
# The module search path. The default path is shown here.
# ModulePath "/usr/X11R6/lib/modules"
EndSection
# **********************************************************************
# Server flags section.
# **********************************************************************
Section "ServerFlags"
# Uncomment this to cause a core dump at the spot where a signal is
# received. This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging
# Option "NoTrapSignals"
# Uncomment this to disable the <Crtl><Alt><Fn> VT switch sequence
# (where n is 1 through 12). This allows clients to receive these key
# events.
# Option "DontVTSwitch"
# Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
# This allows clients to receive this key event.
# Option "DontZap"
# Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
# sequences. This allows clients to receive these key events.
# Option "Dont Zoom"
# Uncomment this to disable tuning with the xvidtune client. With
# it the client can still run and fetch card and monitor attributes,
# but it will not be allowed to change them. If it tries it will
# receive a protocol error.
# Option "DisableVidModeExtension"
# Uncomment this to enable the use of a non-local xvidtune client.
# Option "AllowNonLocalXvidtune"
# Uncomment this to disable dynamically modifying the input device
# (mouse and keyboard) settings.
# Option "DisableModInDev"
# Uncomment this to enable the use of a non-local client to
# change the keyboard or mouse settings (currently only xset).
# Option "AllowNonLocalModInDev"
EndSection
# **********************************************************************
# Input devices
# **********************************************************************
# **********************************************************************
# Core keyboard's InputDevice section
# **********************************************************************
Section "InputDevice"
Identifier "Keyboard1"
Driver "Keyboard"
# For most OSs the protocol can be omitted (it defaults to "Standard").
# When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
# uncomment the following line.
# Option "Protocol" "Xqueue"
Option "AutoRepeat" "500 30"
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
# Option "Xleds" "1 2 3"
# Option "LeftAlt" "Meta"
# Option "RightAlt" "ModeShift"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"
# These are the default XKB settings for XFree86
# Option "XkbRules" "xfree86"
# Option "XkbModel" "pc101"
# Option "XkbLayout" "us"
# Option "XkbVariant" ""
# Option "XkbOptions" ""
# Option "XkbDisable"
Option "XkbRules" "xfree86"
Option "XkbModel" "pc101"
Option "XkbLayout" "us"
EndSection
# **********************************************************************
# Core Pointer's InputDevice section
# **********************************************************************
Section "InputDevice"
# Identifier and driver
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "Auto"
Option "Device" "/dev/sysmouse"
# Mouse-speed setting for PS/2 mouse.
# Option "Resolution" "256"
# When using XQUEUE, comment out the above two lines, and uncomment
# the following line.
# Option "Protocol" "Xqueue"
# Baudrate and SampleRate are only for some Logitech mice. In
# almost every case these lines should be omitted.
# Option "BaudRate" "9600"
# Option "SampleRate" "150"
# Emulate3Buttons is an option for 2-button Microsoft mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)
# Option "Emulate3Buttons"
# Option "Emulate3Timeout" "50"
# ChordMiddle is an option for some 3-button Logitech mice
# Option "ChordMiddle"
EndSection
# **********************************************************************
# Other input device sections
# this is optional and is required only if you
# are using extended input devices. This is for example only. Refer
# to the XF86Config man page for a description of the options.
# **********************************************************************
#
# Section "InputDevice"
# Identifier "Mouse2"
# Driver "mouse"
# Option "Protocol" "MouseMan"
# Option "Device" "/dev/mouse2"
# EndSection
#
# Section "InputDevice"
# Identifier "spaceball"
# Driver "magellan"
# Option "Device" "/dev/cua0"
# EndSection
#
# Section "InputDevice"
# Identifier "spaceball2"
# Driver "spaceorb"
# Option "Device" "/dev/cua0"
# EndSection
#
# Section "InputDevice"
# Identifier "touchscreen0"
# Driver "microtouch"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "1412"
# Option "MaxX" "15184"
# Option "MinY" "15372"
# Option "MaxY" "1230"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
#
# Section "InputDevice"
# Identifier "touchscreen1"
# Driver "elo2300"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "231"
# Option "MaxX" "3868"
# Option "MinY" "3858"
# Option "MaxY" "272"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonThreshold" "17"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
# **********************************************************************
# Monitor section
# **********************************************************************
# Any number of monitor sections may be present
Section "Monitor"
Identifier "Diamond Pro 17TX"
# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
HorizSync 31.5 - 57.0
# HorizSync 30-64 # multisync
# HorizSync 31.5, 35.2 # multiple fixed sync frequencies
# HorizSync 15-25, 30-50 # multiple ranges of sync frequencies
# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
VertRefresh 50-150
EndSection
# **********************************************************************
# Graphics device section
# **********************************************************************
# Any number of graphics device sections may be present
# Standard VGA Device:
Section "Device"
Identifier "Standard VGA"
VendorName "Unknown"
BoardName "Unknown"
# The chipset line is optional in most cases. It can be used to override
# the driver's chipset detection, and should not normally be specified.
# Chipset "generic"
# The Driver line must be present. When using run-time loadable driver
# modules, this line instructs the server to load the specified driver
# module. Even when not using loadable driver modules, this line
# indicates which driver should interpret the information in this section.
Driver "vga"
# The BusID line is used to specify which of possibly multiple devices
# this section is intended for. When this line isn't present, a device
# section can only match up with the primary video device. For PCI
# devices a line like the following could be used. This line should not
# normally be included unless there is more than one video device
# intalled.
# BusID "PCI:0:10:0"
# VideoRam 256
# Clocks 25.2 28.3
EndSection
# Device configured by xf86config:
Section "Device"
Identifier "STB Nitro 3D"
Driver "s3virge"
#VideoRam 4096
#Option "xaa_benchmark"
#Option "fifo_moderate"
#Option "pci_burst_on"
#Option "pci_retry"
# Insert Clocks lines here if appropriate
EndSection
# **********************************************************************
# Screen sections
# **********************************************************************
# Any number of screen sections may be present. Each describes
# the configuration of a single screen. A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.
Section "Screen"
Identifier "Screen 1"
Device "STB Nitro 3D"
Monitor "Diamond Pro 17TX"
DefaultDepth 8
Subsection "Display"
Depth 8
Modes "1280x1024" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 16
Modes "1280x1024" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 24
Modes "1280x1024" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
EndSection
# **********************************************************************
# ServerLayout sections.
# **********************************************************************
# Any number of ServerLayout sections may be present. Each describes
# the way multiple screens are organised. A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option. In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.
Section "ServerLayout"
# The Identifier line must be present
Identifier "Simple Layout"
# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens. The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen. In this example, screen 2 is located to the
# right of screen 1.
Screen "Screen 1"
# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used. Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".
InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection
# Section "DRI"
# Mode 0666
# EndSection
XFree86 Version 4.3.0
Release Date: 27 February 2003
X Protocol Version 11, Revision 0, Release 6.6
Build Operating System: FreeBSD 4.9 i386 [ELF]
Build Date: 07 October 2003
Before reporting problems, check http://www.XFree86.Org/
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/XFree86.0.log", Time: Mon Apr 12 17:28:05 2004
(==) Using config file: "/etc/X11/XF86Config"
(==) ServerLayout "Simple Layout"
(**) |-->Screen "Screen 1" (0)
(**) | |-->Monitor "Diamond Pro 17TX"
(**) | |-->Device "STB Nitro 3D"
(**) |-->Input Device "Mouse1"
(**) |-->Input Device "Keyboard1"
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xfree86"
(**) XKB: rules: "xfree86"
(**) Option "XkbModel" "pc101"
(**) XKB: model: "pc101"
(**) Option "XkbLayout" "us"
(**) XKB: layout: "us"
(==) Keyboard: CustomKeycode disabled
(WW) `fonts.dir' not found (or not valid) in "/usr/X11R6/lib/X11/fonts/local/".
Entry deleted from font path.
(Run 'mkfontdir' on "/usr/X11R6/lib/X11/fonts/local/").
(**) FontPath set to "/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/75dpi/:unscaled,/usr/X11R6/lib/X11/fonts/100dpi/:unscaled,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/"
(**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(==) ModulePath set to "/usr/X11R6/lib/modules"
(--) Using syscons driver with X support (version 2.0)
(--) using VT number 9
(II) Module ABI versions:
XFree86 ANSI C Emulation: 0.2
XFree86 Video Driver: 0.6
XFree86 XInput driver : 0.4
XFree86 Server Extension : 0.2
XFree86 Font Renderer : 0.4
(II) Loader running on freebsd
(II) LoadModule: "bitmap"
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.6
(II) PCI: Probing config type using method 1
(II) PCI: Config type is 1
(II) PCI: stages = 0x03, oldVal1 = 0x00000000, mode1Res1 = 0x80000000
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 8086,1237 card 0000,0000 rev 02 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 8086,7000 card 0000,0000 rev 01 class 06,01,00 hdr 80
(II) PCI: 00:01:1: chip 8086,7010 card 0000,0000 rev 00 class 01,01,80 hdr 00
(II) PCI: 00:01:2: chip 8086,7020 card 0000,0000 rev 01 class 0c,03,00 hdr 00
(II) PCI: 00:06:0: chip 5333,8a01 card 10b4,1717 rev 01 class 03,00,00 hdr 00
(II) PCI: 00:0b:0: chip 9004,7178 card 0000,0000 rev 00 class 01,00,00 hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,0), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:1:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(--) PCI:*(0:6:0) S3 Inc. ViRGE/DX or /GX rev 1, Mem @ 0x40000000/26
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) Active PCI resource ranges:
[0] -1 0 0x50000000 - 0x5fffffff (0x10000000) MX[B]E
[1] -1 0 0x40000000 - 0x43ffffff (0x4000000) MX[B](B)
[2] -1 0 0x00005000 - 0x000050ff (0x100) IX[B]E
[3] -1 0 0x00005400 - 0x000054ff (0x100) IX[B]E
[4] -1 0 0x0000fff0 - 0x0000ffff (0x10) IX[B]E
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0x50000000 - 0x5fffffff (0x10000000) MX[B]E
[1] -1 0 0x40000000 - 0x43ffffff (0x4000000) MX[B](B)
[2] -1 0 0x00005000 - 0x000050ff (0x100) IX[B]E
[3] -1 0 0x00005400 - 0x000054ff (0x100) IX[B]E
[4] -1 0 0x0000fff0 - 0x0000ffff (0x10) IX[B]E
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x50000000 - 0x5fffffff (0x10000000) MX[B]E
[6] -1 0 0x40000000 - 0x43ffffff (0x4000000) MX[B](B)
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[8] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[9] -1 0 0x00005000 - 0x000050ff (0x100) IX[B]E
[10] -1 0 0x00005400 - 0x000054ff (0x100) IX[B]E
[11] -1 0 0x0000fff0 - 0x0000ffff (0x10) IX[B]E
(II) LoadModule: "dbe"
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension DPMS
(II) Loading extension FontCache
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "type1"
(II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
(II) Module type1: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.2
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font Type1
(II) Loading font CID
(II) LoadModule: "speedo"
(II) Loading /usr/X11R6/lib/modules/fonts/libspeedo.a
(II) Module speedo: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.1
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font Speedo
(II) LoadModule: "s3virge"
(II) Loading /usr/X11R6/lib/modules/drivers/s3virge_drv.o
(II) Module s3virge: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.8.6
Module class: XFree86 Video Driver
ABI class: XFree86 Video Driver, version 0.6
(II) LoadModule: "mouse"
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
Module class: XFree86 XInput Driver
ABI class: XFree86 XInput driver, version 0.4
(II) S3VIRGE: driver (version 1.8.6) for S3 ViRGE chipsets: virge, 86C325,
virge vx, 86C988, virge dx, virge gx, 86C375, 86C385, virge gx2,
86C357, virge mx, 86C260, virge mx+, 86C280, trio 3d, 86C365,
trio 3d/2x, 86C362, 86C368
(II) Primary Device is: PCI 00:06:0
(--) Assigning device section with no busID to primary device
(--) Chipset virge dx found
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x50000000 - 0x5fffffff (0x10000000) MX[B]E
[6] -1 0 0x40000000 - 0x43ffffff (0x4000000) MX[B](B)
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[8] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[9] -1 0 0x00005000 - 0x000050ff (0x100) IX[B]E
[10] -1 0 0x00005400 - 0x000054ff (0x100) IX[B]E
[11] -1 0 0x0000fff0 - 0x0000ffff (0x10) IX[B]E
(II) resource ranges after probing:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x50000000 - 0x5fffffff (0x10000000) MX[B]E
[6] -1 0 0x40000000 - 0x43ffffff (0x4000000) MX[B](B)
[7] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[8] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[9] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[10] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[11] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[12] -1 0 0x00005000 - 0x000050ff (0x100) IX[B]E
[13] -1 0 0x00005400 - 0x000054ff (0x100) IX[B]E
[14] -1 0 0x0000fff0 - 0x0000ffff (0x10) IX[B]E
[15] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[16] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/X11R6/lib/modules/libvgahw.a
(II) Module vgahw: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.6
(**) S3VIRGE(0): Depth 8, (--) framebuffer bpp 8
(==) S3VIRGE(0): Default visual is PseudoColor
(==) S3VIRGE(0): Using HW Cursor
(==) S3VIRGE(0): Using fb.
(==) S3VIRGE(0): mx_cr3a_fix.
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/X11R6/lib/modules/libvbe.a
(II) Module vbe: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.1.0
ABI class: XFree86 Video Driver, version 0.6
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/X11R6/lib/modules/libint10.a
(II) Module int10: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.6
(II) S3VIRGE(0): initializing int10
(==) S3VIRGE(0): Write-combining range (0xa0000,0x20000) was already clear
(==) S3VIRGE(0): Write-combining range (0xc0000,0x40000) was already clear
(II) S3VIRGE(0): Primary V_BIOS segment is: 0xc000
(==) S3VIRGE(0): Write-combining range (0x0,0x1000) was already clear
(II) S3VIRGE(0): VESA BIOS detected
(II) S3VIRGE(0): VESA VBE Version 1.2
(II) S3VIRGE(0): VESA VBE Total Mem: 4096 kB
(II) S3VIRGE(0): VESA VBE OEM: STB Nitro 3D (86C385)
(--) S3VIRGE(0): Chipset: "virge dx"
(==) S3VIRGE(0): XVideo not supported.
(==) S3VIRGE(0): Write-combining range (0x41000000,0x10000) was already clear
(==) S3VIRGE(0): Write-combining range (0x41000000,0x8000) was already clear
(II) S3VIRGE(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(II) S3VIRGE(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(==) S3VIRGE(0): Write-combining range (0xa0000,0x10000) was already clear
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Loading /usr/X11R6/lib/modules/libddc.a
(II) Module ddc: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.6
(--) S3VIRGE(0): No DDC signal
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Loading /usr/X11R6/lib/modules/libi2c.a
(II) Module i2c: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.2.0
ABI class: XFree86 Video Driver, version 0.6
(II) S3VIRGE(0): I2C bus "I2C bus" initialized.
(II) S3VIRGE(0): I2C device "I2C bus:ddc2" registered at address 0xA0.
(II) S3VIRGE(0): I2C device "I2C bus:ddc2" removed.
(==) S3VIRGE(0): Write-combining range (0x0,0x1000) was already clear
(==) S3VIRGE(0): Using gamma correction (1.0, 1.0, 1.0)
(--) S3VIRGE(0): videoram: 4096k
(--) S3VIRGE(0): Detected current MCLK value of 75.170 MHz
(II) S3VIRGE(0): Diamond Pro 17TX: Using hsync range of 31.50-57.00 kHz
(II) S3VIRGE(0): Diamond Pro 17TX: Using vrefresh range of 50.00-150.00 Hz
(II) S3VIRGE(0): Clock range: 10.00 to 270.00 MHz
(II) S3VIRGE(0): Not using default mode "1024x768" (hsync out of range)
(II) S3VIRGE(0): Not using default mode "512x384" (hsync out of range)
(II) S3VIRGE(0): Not using default mode "1024x768" (hsync out of range)
(II) S3VIRGE(0): Not using default mode "512x384" (hsync out of range)
(II) S3VIRGE(0): Not using default mode "1152x864" (hsync out of range)
(II) S3VIRGE(0): Not using default mode "576x432" (hsync out of range)
(II) S3VIRGE(0): Not using default mode "1280x960" (hsync out of range)
(II) S3VIRGE(0): Not using default mode "640x480" (hsync out of range)
(II) S3VIRGE(0): Not using default mode "1280x960" (hsync out of range)
(II) S3VIRGE(0): Not using default mode "640x480" (hsync out of range)
(II) S3VIRGE(0): Not using default mode "1280x1024" (hsync out of range)
(II) S3VIRGE(0): Not using default mode "640x512" (hsync out of range)
(II) S3VIRGE(0): Not using default mode "1280x1024" (hsync out of range)
(II) S3VIRGE(0): Not using default mode "640x512" (hsync out of range)
(II) S3VIRGE(0): Not using default mode "1280x1024" (hsync out of range)
(II) S3VIRGE(0): Not using default mode "640x512" (hsync out of range)
(II) S3VIRGE(0): Not using default mode "1600x1200" (horizontal timing out of range)
(II) S3VIRGE(0): Not using default mode "800x600" (hsync out of range)
(II) S3VIRGE(0): Not using default mode "1600x1200" (horizontal timing out of range)
(II) S3VIRGE(0): Not using default mode "800x600" (hsync out of range)
(II) S3VIRGE(0): Not using default mode "1600x1200" (horizontal timing out of range)
(II) S3VIRGE(0): Not using default mode "800x600" (hsync out of range)
(II) S3VIRGE(0): Not using default mode "1600x1200" (horizontal timing out of range)
(II) S3VIRGE(0): Not using default mode "800x600" (hsync out of range)
(II) S3VIRGE(0): Not using default mode "1600x1200" (horizontal timing out of range)
(II) S3VIRGE(0): Not using default mode "800x600" (hsync out of range)
(II) S3VIRGE(0): Not using default mode "1792x1344" (horizontal timing out of range)
(II) S3VIRGE(0): Not using default mode "896x672" (hsync out of range)
(II) S3VIRGE(0): Not using default mode "1792x1344" (horizontal timing out of range)
(II) S3VIRGE(0): Not using default mode "896x672" (hsync out of range)
(II) S3VIRGE(0): Not using default mode "1856x1392" (horizontal timing out of range)
(II) S3VIRGE(0): Not using default mode "928x696" (hsync out of range)
(II) S3VIRGE(0): Not using default mode "1856x1392" (horizontal timing out of range)
(II) S3VIRGE(0): Not using default mode "928x696" (hsync out of range)
(II) S3VIRGE(0): Not using default mode "1920x1440" (horizontal timing out of range)
(II) S3VIRGE(0): Not using default mode "960x720" (hsync out of range)
(II) S3VIRGE(0): Not using default mode "1920x1440" (horizontal timing out of range)
(II) S3VIRGE(0): Not using default mode "960x720" (hsync out of range)
(II) S3VIRGE(0): Not using default mode "1400x1050" (hsync out of range)
(II) S3VIRGE(0): Not using default mode "700x525" (hsync out of range)
(II) S3VIRGE(0): Not using default mode "1400x1050" (hsync out of range)
(II) S3VIRGE(0): Not using default mode "700x525" (hsync out of range)
(II) S3VIRGE(0): Not using default mode "1600x1024" (hsync out of range)
(II) S3VIRGE(0): Not using default mode "800x512" (hsync out of range)
(II) S3VIRGE(0): Not using default mode "1920x1440" (horizontal timing out of range)
(II) S3VIRGE(0): Not using default mode "960x720" (hsync out of range)
(II) S3VIRGE(0): Not using default mode "2048x1536" (horizontal timing out of range)
(II) S3VIRGE(0): Not using default mode "1024x768" (hsync out of range)
(II) S3VIRGE(0): Not using default mode "2048x1536" (horizontal timing out of range)
(II) S3VIRGE(0): Not using default mode "1024x768" (hsync out of range)
(II) S3VIRGE(0): Not using default mode "2048x1536" (horizontal timing out of range)
(II) S3VIRGE(0): Not using default mode "1024x768" (hsync out of range)
(II) S3VIRGE(0): Not using mode "1280x1024" (no mode of this name)
(II) S3VIRGE(0): Not using default mode "1152x768" (width too large for virtual size)
(--) S3VIRGE(0): Virtual size is 1024x768 (pitch 1024)
(**) S3VIRGE(0): *Default mode "1024x768": 75.0 MHz, 56.5 kHz, 70.1 Hz
(II) S3VIRGE(0): Modeline "1024x768" 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync
(**) S3VIRGE(0): *Default mode "800x600": 56.3 MHz, 53.7 kHz, 85.1 Hz
(II) S3VIRGE(0): Modeline "800x600" 56.30 800 832 896 1048 600 601 604 631 +hsync +vsync
(**) S3VIRGE(0): *Default mode "640x480": 36.0 MHz, 43.3 kHz, 85.0 Hz
(II) S3VIRGE(0): Modeline "640x480" 36.00 640 696 752 832 480 481 484 509 -hsync -vsync
(**) S3VIRGE(0): Default mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz
(II) S3VIRGE(0): Modeline "1024x768" 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync
(**) S3VIRGE(0): Default mode "1024x768": 44.9 MHz, 35.5 kHz, 87.1 Hz (I)
(II) S3VIRGE(0): Modeline "1024x768" 44.90 1024 1032 1208 1264 768 768 776 817 interlace +hsync +vsync
(**) S3VIRGE(0): Default mode "832x624": 57.3 MHz, 49.7 kHz, 74.6 Hz
(II) S3VIRGE(0): Modeline "832x624" 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync
(**) S3VIRGE(0): Default mode "800x600": 49.5 MHz, 46.9 kHz, 75.0 Hz
(II) S3VIRGE(0): Modeline "800x600" 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync
(**) S3VIRGE(0): Default mode "800x600": 50.0 MHz, 48.1 kHz, 72.2 Hz
(II) S3VIRGE(0): Modeline "800x600" 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync
(**) S3VIRGE(0): Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
(II) S3VIRGE(0): Modeline "800x600" 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync
(**) S3VIRGE(0): Default mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz
(II) S3VIRGE(0): Modeline "800x600" 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync
(**) S3VIRGE(0): Default mode "640x480": 31.5 MHz, 37.5 kHz, 75.0 Hz
(II) S3VIRGE(0): Modeline "640x480" 31.50 640 656 720 840 480 481 484 500 -hsync -vsync
(**) S3VIRGE(0): Default mode "640x480": 31.5 MHz, 37.9 kHz, 72.8 Hz
(II) S3VIRGE(0): Modeline "640x480" 31.50 640 664 704 832 480 489 491 520 -hsync -vsync
(**) S3VIRGE(0): Default mode "640x480": 25.2 MHz, 31.5 kHz, 60.0 Hz
(II) S3VIRGE(0): Modeline "640x480" 25.20 640 656 752 800 480 490 492 525 -hsync -vsync
(**) S3VIRGE(0): Default mode "720x400": 35.5 MHz, 37.9 kHz, 85.0 Hz
(II) S3VIRGE(0): Modeline "720x400" 35.50 720 756 828 936 400 401 404 446 -hsync +vsync
(**) S3VIRGE(0): Default mode "640x400": 31.5 MHz, 37.9 kHz, 85.1 Hz
(II) S3VIRGE(0): Modeline "640x400" 31.50 640 672 736 832 400 401 404 445 -hsync +vsync
(**) S3VIRGE(0): Default mode "640x350": 31.5 MHz, 37.9 kHz, 85.1 Hz
(II) S3VIRGE(0): Modeline "640x350" 31.50 640 672 736 832 350 382 385 445 +hsync -vsync
(**) S3VIRGE(0): Default mode "576x384": 32.5 MHz, 44.2 kHz, 54.8 Hz (D)
(II) S3VIRGE(0): Modeline "576x384" 32.50 576 589 657 736 384 385 388 403 doublescan +hsync +vsync
(**) S3VIRGE(0): Default mode "512x384": 37.5 MHz, 56.5 kHz, 70.1 Hz (D)
(II) S3VIRGE(0): Modeline "512x384" 37.50 512 524 592 664 384 385 388 403 doublescan -hsync -vsync
(**) S3VIRGE(0): Default mode "512x384": 32.5 MHz, 48.4 kHz, 60.0 Hz (D)
(II) S3VIRGE(0): Modeline "512x384" 32.50 512 524 592 672 384 385 388 403 doublescan -hsync -vsync
(**) S3VIRGE(0): Default mode "512x384": 22.4 MHz, 35.5 kHz, 87.1 Hz (D)
(II) S3VIRGE(0): Modeline "512x384" 22.45 512 516 604 632 384 384 388 409 interlace doublescan +hsync +vsync
(**) S3VIRGE(0): Default mode "416x312": 28.6 MHz, 49.7 kHz, 74.7 Hz (D)
(II) S3VIRGE(0): Modeline "416x312" 28.64 416 432 464 576 312 312 314 333 doublescan -hsync -vsync
(**) S3VIRGE(0): Default mode "400x300": 28.1 MHz, 53.7 kHz, 85.3 Hz (D)
(II) S3VIRGE(0): Modeline "400x300" 28.15 400 416 448 524 300 300 302 315 doublescan +hsync +vsync
(**) S3VIRGE(0): Default mode "400x300": 24.8 MHz, 46.9 kHz, 75.1 Hz (D)
(II) S3VIRGE(0): Modeline "400x300" 24.75 400 408 448 528 300 300 302 312 doublescan +hsync +vsync
(**) S3VIRGE(0): Default mode "400x300": 25.0 MHz, 48.1 kHz, 72.2 Hz (D)
(II) S3VIRGE(0): Modeline "400x300" 25.00 400 428 488 520 300 318 321 333 doublescan +hsync +vsync
(**) S3VIRGE(0): Default mode "400x300": 20.0 MHz, 37.9 kHz, 60.3 Hz (D)
(II) S3VIRGE(0): Modeline "400x300" 20.00 400 420 484 528 300 300 302 314 doublescan +hsync +vsync
(**) S3VIRGE(0): Default mode "400x300": 18.0 MHz, 35.2 kHz, 56.3 Hz (D)
(II) S3VIRGE(0): Modeline "400x300" 18.00 400 412 448 512 300 300 301 312 doublescan +hsync +vsync
(**) S3VIRGE(0): Default mode "320x240": 18.0 MHz, 43.3 kHz, 85.2 Hz (D)
(II) S3VIRGE(0): Modeline "320x240" 18.00 320 348 376 416 240 240 242 254 doublescan -hsync -vsync
(**) S3VIRGE(0): Default mode "320x240": 15.8 MHz, 37.5 kHz, 75.0 Hz (D)
(II) S3VIRGE(0): Modeline "320x240" 15.75 320 328 360 420 240 240 242 250 doublescan -hsync -vsync
(**) S3VIRGE(0): Default mode "320x240": 15.8 MHz, 37.9 kHz, 72.8 Hz (D)
(II) S3VIRGE(0): Modeline "320x240" 15.75 320 332 352 416 240 244 245 260 doublescan -hsync -vsync
(**) S3VIRGE(0): Default mode "320x240": 12.6 MHz, 31.5 kHz, 60.1 Hz (D)
(II) S3VIRGE(0): Modeline "320x240" 12.60 320 328 376 400 240 245 246 262 doublescan -hsync -vsync
(**) S3VIRGE(0): Default mode "360x200": 17.8 MHz, 37.9 kHz, 85.0 Hz (D)
(II) S3VIRGE(0): Modeline "360x200" 17.75 360 378 414 468 200 200 202 223 doublescan -hsync +vsync
(**) S3VIRGE(0): Default mode "320x200": 15.8 MHz, 37.9 kHz, 85.3 Hz (D)
(II) S3VIRGE(0): Modeline "320x200" 15.75 320 336 368 416 200 200 202 222 doublescan -hsync +vsync
(**) S3VIRGE(0): Default mode "320x175": 15.8 MHz, 37.9 kHz, 85.3 Hz (D)
(II) S3VIRGE(0): Modeline "320x175" 15.75 320 336 368 416 175 191 192 222 doublescan +hsync -vsync
(==) S3VIRGE(0): DPI set to (75, 75)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/X11R6/lib/modules/libfb.a
(II) Module fb: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
ABI class: XFree86 ANSI C Emulation, version 0.2
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/X11R6/lib/modules/libxaa.a
(II) Module xaa: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.1.0
ABI class: XFree86 Video Driver, version 0.6
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/X11R6/lib/modules/libramdac.a
(II) Module ramdac: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.6
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] 0 0 0x40000000 - 0x43ffffff (0x4000000) MS[B]
[1] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[2] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[3] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[4] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[5] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[6] -1 0 0x50000000 - 0x5fffffff (0x10000000) MX[B]E
[7] -1 0 0x40000000 - 0x43ffffff (0x4000000) MX[B](B)
[8] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprD)
[9] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD)
[10] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprD)
[11] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[12] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[13] -1 0 0x00005000 - 0x000050ff (0x100) IX[B]E
[14] -1 0 0x00005400 - 0x000054ff (0x100) IX[B]E
[15] -1 0 0x0000fff0 - 0x0000ffff (0x10) IX[B]E
[16] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
[17] 0 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU)
(==) S3VIRGE(0): Write-combining range (0x41000000,0x10000) was already clear
(==) S3VIRGE(0): Write-combining range (0x41000000,0x8000) was already clear
(==) S3VIRGE(0): Write-combining range (0x40000000,0x400000)
(II) S3VIRGE(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(II) S3VIRGE(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(==) S3VIRGE(0): Write-combining range (0xa0000,0x10000) was already clear
(**) S3VIRGE(0): Using FB
(II) S3VIRGE(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
CPU to Screen color expansion
Solid Horizontal and Vertical Lines
Image Writes
Offscreen Pixmaps
Setting up tile and stipple cache:
32 128x128 slots
18 256x256 slots
6 512x512 slots
(==) S3VIRGE(0): Backing store disabled
(==) S3VIRGE(0): Silken mouse enabled
(==) RandR enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension LBX
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(**) Option "Protocol" "Auto"
(**) Mouse1: Protocol: "Auto"
(**) Option "CorePointer"
(**) Mouse1: Core Pointer
(**) Option "Device" "/dev/sysmouse"
(**) Mouse1: Emulate3Buttons, Emulate3Timeout: 50
(==) Mouse1: Buttons: 3
(II) Keyboard "Keyboard1" handled by legacy driver
(II) XINPUT: Adding extended input device "Mouse1" (type: MOUSE)
(II) Mouse1: SetupAuto: hw.iftype is 4, hw.model is 0
(II) Mouse1: SetupAuto: protocol is SysMouse
XFree86 Version 4.3.0
Release Date: 27 February 2003
X Protocol Version 11, Revision 0, Release 6.6
Build Operating System: FreeBSD 4.9 i386 [ELF]
Build Date: 07 October 2003
Before reporting problems, check http://www.XFree86.Org/
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/XFree86.0.log", Time: Mon Apr 12 13:23:53 2004
(==) Using config file: "/etc/X11/XF86Config"
expected keysym, got XF86_Switch_VT_1: line 8 of xfree86
expected keysym, got XF86_Switch_VT_2: line 11 of xfree86
expected keysym, got XF86_Switch_VT_3: line 14 of xfree86
expected keysym, got XF86_Switch_VT_4: line 17 of xfree86
expected keysym, got XF86_Switch_VT_5: line 20 of xfree86
expected keysym, got XF86_Switch_VT_6: line 23 of xfree86
expected keysym, got XF86_Switch_VT_7: line 26 of xfree86
expected keysym, got XF86_Switch_VT_8: line 29 of xfree86
expected keysym, got XF86_Switch_VT_9: line 32 of xfree86
expected keysym, got XF86_Switch_VT_10: line 35 of xfree86
expected keysym, got XF86_Switch_VT_11: line 38 of xfree86
expected keysym, got XF86_Switch_VT_12: line 41 of xfree86
expected keysym, got XF86_Ungrab: line 45 of xfree86
expected keysym, got XF86_ClearGrab: line 48 of xfree86
expected keysym, got XF86_Next_VMode: line 51 of xfree86
expected keysym, got XF86_Prev_VMode: line 54 of xfree86
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning: Multiple interpretations of "NoSymbol+AnyOfOrNone(all)"
> Using last definition for duplicate fields
> Warning: Multiple interpretations of "NoSymbol+AnyOfOrNone(all)"
> Using last definition for duplicate fields
> Warning: Multiple interpretations of "NoSymbol+AnyOfOrNone(all)"
> Using last definition for duplicate fields
> Warning: Multiple interpretations of "NoSymbol+AnyOfOrNone(all)"
> Using last definition for duplicate fields
> Warning: Multiple interpretations of "NoSymbol+AnyOfOrNone(all)"
> Using last definition for duplicate fields
> Warning: Multiple interpretations of "NoSymbol+AnyOfOrNone(all)"
> Using last definition for duplicate fields
> Warning: Multiple interpretations of "NoSymbol+AnyOfOrNone(all)"
> Using last definition for duplicate fields
> Warning: Multiple interpretations of "NoSymbol+AnyOfOrNone(all)"
> Using last definition for duplicate fields
> Warning: Multiple interpretations of "NoSymbol+AnyOfOrNone(all)"
> Using last definition for duplicate fields
> Warning: Multiple interpretations of "NoSymbol+AnyOfOrNone(all)"
> Using last definition for duplicate fields
> Warning: Multiple interpretations of "NoSymbol+AnyOfOrNone(all)"
> Using last definition for duplicate fields
> Warning: Multiple interpretations of "NoSymbol+AnyOfOrNone(all)"
> Using last definition for duplicate fields
> Warning: Multiple interpretations of "NoSymbol+AnyOfOrNone(all)"
> Using last definition for duplicate fields
> Warning: Multiple interpretations of "NoSymbol+AnyOfOrNone(all)"
> Using last definition for duplicate fields
> Warning: Multiple interpretations of "NoSymbol+AnyOfOrNone(all)"
> Using last definition for duplicate fields
expected keysym, got XF86_Switch_VT_1: line 51 of pc/pc
expected keysym, got XF86_Switch_VT_2: line 55 of pc/pc
expected keysym, got XF86_Switch_VT_3: line 59 of pc/pc
expected keysym, got XF86_Switch_VT_4: line 63 of pc/pc
expected keysym, got XF86_Switch_VT_5: line 67 of pc/pc
expected keysym, got XF86_Switch_VT_6: line 71 of pc/pc
expected keysym, got XF86_Switch_VT_7: line 75 of pc/pc
expected keysym, got XF86_Switch_VT_8: line 79 of pc/pc
expected keysym, got XF86_Switch_VT_9: line 83 of pc/pc
expected keysym, got XF86_Switch_VT_10: line 87 of pc/pc
expected keysym, got XF86_Switch_VT_11: line 91 of pc/pc
expected keysym, got XF86_Switch_VT_12: line 95 of pc/pc
expected keysym, got XF86_Ungrab: line 135 of pc/pc
expected keysym, got XF86_ClearGrab: line 141 of pc/pc
expected keysym, got XF86_Prev_VMode: line 147 of pc/pc
expected keysym, got XF86_Next_VMode: line 157 of pc/pc
Errors from xkbcomp are not fatal to the X server
parse error at line 202
Invalid mnemonic, accelerator, or function at line 202
Invalid mnemonic, accelerator, or function at line 202
parse error at line 205
Invalid mnemonic, accelerator, or function at line 205
Invalid mnemonic, accelerator, or function at line 205
parse error at line 230
Invalid mnemonic, accelerator, or function at line 230
Invalid key binding at line 230
parse error at line 231
Invalid mnemonic, accelerator, or function at line 231
Invalid key binding at line 231
parse error at line 231
Invalid mnemonic, accelerator, or function at line 231
Invalid key binding at line 231
parse error at line 231
Invalid key binding at line 231
parse error at line 231
Invalid key binding at line 231
parse error at line 231
Invalid key binding at line 231
parse error at line 232
Invalid key binding at line 232
parse error at line 232
Invalid mnemonic, accelerator, or function at line 232
Invalid key binding at line 232
parse error at line 232
Invalid key binding at line 232
parse error at line 232
Invalid key binding at line 232
parse error at line 233
Invalid key binding at line 233
parse error at line 233
Invalid mnemonic, accelerator, or function at line 233
Invalid key binding at line 233
parse error at line 233
Invalid key binding at line 233
parse error at line 233
Invalid key binding at line 233
parse error at line 233
Invalid key binding at line 233
parse error at line 234
Invalid key binding at line 234
parse error at line 234
Invalid mnemonic, accelerator, or function at line 234
Invalid key binding at line 234
parse error at line 234
Invalid key binding at line 234
parse error at line 234
Invalid key binding at line 234
parse error at line 235
Invalid key binding at line 235
parse error at line 254
Invalid mnemonic, accelerator, or function at line 254
Invalid button binding at line 254
parse error at line 255
Invalid mnemonic, accelerator, or function at line 255
Invalid button binding at line 255
parse error at line 272
Invalid mnemonic, accelerator, or function at line 272
Invalid button binding at line 272
parse error at line 273
Invalid mnemonic, accelerator, or function at line 273
Invalid button binding at line 273
Can't find requested menu: Can't find requested menu: Can't find requested menu: Ursa1: fatal IO error 32 (Broken pipe) or KillClient on X server ":0.0"
Ursa3: fatal IO error 32 (Broken pipe) or KillClient on X server ":0.0"
X connection to :0.0 broken (explicit kill or server shutdown).
SysAdmin: fatal IO error 32 (Broken pipe) or KillClient on X server ":0.0"
xinit: connection to X server lost.
waiting for X server to shut down Ursa2: fatal IO error 32 (Broken pipe) or KillClient on X server ":0.0"
Ursa4: fatal IO error 32 (Broken pipe) or KillClient on X server ":0.0"
--- End Message ---
