Hello I have a system that i've loaded FreeBSD on. I am currently running 5.2.1 but it also failed on 5.2-rc. I have xfree86 version 4.4.0 installed but it also failed on 4.3. It is an older system with a KU440EX mother board with a celeron 266MHz processor and 128MB ram. The onboard video driver is an ATI Rage IIC Controller. I do a: "XFree86 -configure" and I get a XF86Config.new file. When I try to test with "XFree86 -xf86config /root/XF86Config.new" the system starts to run and I get the start of the log screen and then all systems stop. No keyboard response or anything. "Ctl-Alt-Del" does nothing. I have to powerdown reboot. When the system comes back up the XFree86.0.log has not been updated so I don't know what failed. I have tried remaking out the module loads one at a time without success (sort of). Every once in a while it will go to the test screen and all will look fine. I'll exit with Ctl-Alt-Bkspc and the exit is fine. If I try to do a retest without changing anything, it always fails. Now, here's the weird part, I can install Slackware 9.1 on the system, on the same partition and it works. The XF86Config file is exactly the same as the one from FReeBSD. Attached are the Xf86Config.new, XFree86.0.log and the output of dmesg as dmesg.txt. I hope someone can point me in the right direction. Please cc your answer to my email. Thank you Robert
Attachment:
XF86Config.new
Description: Binary data
Attachment:
XFree86.0.log
Description: Binary data
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.2.1-RC2 #0: Thu Feb 12 16:28:31 GMT 2004
root@xxxxxxxxxxxxxxxxxxxx:/usr/obj/usr/src/sys/GENERIC
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0a35000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0a3521c.
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Pentium II/Pentium II Xeon/Celeron (265.47-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x650 Stepping = 0
Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
real memory = 134217728 (128 MB)
avail memory = 120737792 (115 MB)
Pentium Pro MTRR support enabled
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <PTLTD RSDT > on motherboard
pcibios: BIOS version 2.10
Using $PIR table, 8 entries at 0xc00fdf40
acpi0: Power Button (fixed)
Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x8008-0x800b on acpi0
acpi_cpu0: <CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib0: slot 7 INTD is routed to irq 9
pcib0: slot 18 INTA is routed to irq 11
agp0: <Intel 82443LX (440 LX) host to PCI bridge> mem 0xf8000000-0xfbffffff at device 0.0 on pci0
pcib1: <PCIBIOS PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci_cfgintr: 1:0 INTA BIOS irq 11
pci1: <display, VGA> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 UDMA33 controller> port 0x1000-0x100f at device 7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata0: [MPSAFE]
ata1: at 0x170 irq 15 on atapci0
ata1: [MPSAFE]
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0x1020-0x103f irq 9 at device 7.2 on pci0
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
pci0: <bridge, PCI-unknown> at device 7.3 (no driver attached)
dc0: <ADMtek AN985 10/100BaseTX> port 0x1400-0x14ff mem 0xf4000000-0xf40003ff irq 11 at device 18.0 on pci0
dc0: Ethernet address: 00:20:78:18:31:be
miibus0: <MII bus> on dc0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
sio1: configured irq 0 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: configured irq 0 not in bitmap of probed irqs 0
sio1: port may not be enabled
orm0: <Option ROMs> at iomem 0xe8000-0xeffff,0xe0000-0xe3fff,0xc0000-0xc7fff on isa0
pmtimer0 on isa0
ppc0: parallel port not found.
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 265465595 Hz quality 800
Timecounters tick every 10.000 msec
GEOM: create disk ad0 dp=0xc205a660
ad0: 76319MB <WDC WD800JB-32FSA0> [155061/16/63] at ata0-master UDMA33
acd0: CDROM <ATAPI 48X CDROM> at ata1-master PIO4
Mounting root from ufs:/dev/ad0s1a
