Hi ya all, I have a problem, with my X. ( nooooooooo ;-) ) I run Debian sid, kernel 2.6.2, xserver-xfree8 4.3.0-2,gcc 3.3.2-3, so I upgraded my system and at start ( the next day ), my X goes only in 800x600 instead 1024x748, I use vesa driver because my laptop has Prosavage 8 on VIA KN400 chipset, and drivers does not function well. That's it, the /var/log/XFree86.0.log errors seems only to be: - Open APM failed (/dev/apm_bios) (No such file or directory) - VESA(0): VESA VBE DDC read failed - VESA(0): VBESetVBEMode failed...Tried again without customized values - VESA(0): Failed to set up write-combining range (0xf0000000,0x4000000) - (II) VESA(0): Total Memory: 1024 64KB banks (65536kB) (II) VESA(0): monitor1: Using hsync range of 31.50-48.50 kHz (II) VESA(0): monitor1: Using vrefresh range of 70.00-130.00 Hz (II) VESA(0): Not using mode "1024x768" (no mode of this name) (--) VESA(0): Virtual size is 800x600 (pitch 800) (**) VESA(0): Built-in mode "800x600" (**) VESA(0): Built-in mode "640x480" (++) VESA(0): DPI set to (100, 100) (II) VESA(0): Attempting to use 72Hz refresh for mode "800x600" (114) (II) VESA(0): Attempting to use 85Hz refresh for mode "640x480" (111) (**) VESA(0): Using "Shadow Framebuffer" but I didn't touched in anyway neither X nor anything concerned. I just killed X and poweroff'ed. What's going on? Help me please I can't stand 800x600 no more, since my video card is not supported ( :-(( why me! ) -- "If a train station is where a train stops. Then what stops at a workstation?" _______________________________________________ XFree86 mailing list XFree86@xxxxxxxxxxx http://XFree86.Org/mailman/listinfo/xfree86