|
Hi, I have attached the log file for my problem... I have NetBSD 1.6.1 and XFree86 4.3.0 I cannot get X graphics to work. please help. logfile and dmesg output attached. thanks, Shane |
NetBSD 1.6.1 (GENERIC) #0: Tue Apr 8 12:05:52 UTC 2003
autobuild@xxxxxxxxxxxxxx:/autobuild/netbsd-1-6/i386/OBJ/autobuild/netbsd-1-6/src/sys/arch/i386/compile/GENERIC
cpu0: Intel Pentium III (Coppermine) (686-class), 1002.33 MHz
cpu0: I-cache 16 KB 32b/line 4-way, D-cache 16 KB 32b/line 2-way
cpu0: L2 cache 256 KB 32b/line 8-way
cpu0: features 383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR>
cpu0: features 383f9ff<PGE,MCA,CMOV,FGPAT,PSE36,MMX>
cpu0: features 383f9ff<FXSR,SSE>
total memory = 255 MB
avail memory = 230 MB
using 3295 buffers containing 13180 KB of memory
BIOS32 rev. 0 found at 0xffe90
mainbus0 (root)
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: Intel 82443BX Host Bridge/Controller (rev. 0x03)
agp0 at pchb0: aperture at 0xf4000000, size 0x4000000
ppb0 at pci0 dev 1 function 0: Intel 82443BX AGP Interface (rev. 0x03)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
vga1 at pci1 dev 0 function 0: ATI Technologies Rage Mobility M3 (AGP) (rev. 0x02)
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
Texas Instruments PCI1420 PCI-CardBus Bridge (CardBus bridge) at pci0 dev 3 function 0 not configured
Texas Instruments PCI1420 PCI-CardBus Bridge (CardBus bridge) at pci0 dev 3 function 1 not configured
pcib0 at pci0 dev 7 function 0
pcib0: Intel 82371AB PCI-to-ISA Bridge (PIIX4) (rev. 0x02)
pciide0 at pci0 dev 7 function 1: Intel 82371AB IDE controller (PIIX4) (rev. 0x01)
pciide0: bus-master DMA support present
pciide0: primary channel wired to compatibility mode
wd0 at pciide0 channel 0 drive 0: <HITACHI_DK23BA-20>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 19077 MB, 16383 cyl, 16 head, 63 sec, 512 bytes/sect x 39070080 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 4 (Ultra/66)
pciide0: primary channel interrupting at irq 14
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA data transfers)
pciide0: secondary channel wired to compatibility mode
atapibus0 at pciide0 channel 1: 2 targets
cd0 at atapibus0 drive 0: <SONY CD-RW CRX700E, , 1.4r> type 5 cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2
pciide0: secondary channel interrupting at irq 15
cd0(pciide0:1:0): using PIO mode 4, DMA mode 2 (using DMA data transfers)
uhci0 at pci0 dev 7 function 2: Intel 82371AB USB Host Controller (PIIX4) (rev. 0x01)
uhci0: interrupting at irq 11
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
Intel 82371AB Power Management Controller (PIIX4) (miscellaneous bridge, revision 0x03) at pci0 dev 7 function 3 not configured
esa0 at pci0 dev 8 function 0: ESS Technology Inc Maestro 3 PCI Audio Accelerator (rev. 0x10)
esa0: interrupting at irq 5
esa0: SigmaTel STAC9721/23 codec; 18 bit DAC, 18 bit ADC, SigmaTel 3D
audio0 at esa0: full duplex, mmap, independent
ex0 at pci0 dev 16 function 0: 3Com 3c556 MiniPCI 10/100 Ethernet (rev. 0x10)
ex0: interrupting at irq 11
ex0: MAC address 00:01:03:89:09:c5
tqphy0 at ex0 phy 0: 78Q2120 10/100 media interface, rev. 11
tqphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
3Com 3c556 V.90 MiniPCI Modem (miscellaneous communications, revision 0x10) at pci0 dev 16 function 1 not configured
isa0 at pcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
lpt0 at isa0 port 0x378-0x37b irq 7
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff: using exception 16
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
pcic0 at isa0 port 0x3e0-0x3e1 iomem 0xd0000-0xdffff irq
pcic0: controller 0 (Intel 82365SL Revision 1) has sockets A and B
pcic0: controller 1 (Intel 82365SL Revision 1) has no sockets
pcmcia0 at pcic0 controller 0 socket 0
pcmcia1 at pcic0 controller 0 socket 1
isapnp0: no ISA Plug 'n Play devices found
biomask ef4d netmask ef4d ttymask ffcf
pcic0: controller 0 detecting irqs with mask 0xdeb8:..3..9..10
pcic0: using irq 3 for socket events
Kernelized RAIDframe activated
umass0 at uhub0 port 1 configuration 1 interface 0
umass0: Generic USB Flash Disk, rev 1.10/1.00, addr 2
umass0: using ATAPI over Bulk-Only
atapibus1 at umass0 channel 0: 2 targets
sd0 at atapibus1 drive 0: <Generic, USB Flash Disk, 1.00> type 0 direct removable
sd0: 255 MB, 0 cyl, 0 head, 0 sec, 512 bytes/sect x 522368 sectors
sd0: no disk label
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)
sd0: no disk label
sd0: no disk label
cd0: no disk label
umass0: at uhub0 port 1 (addr 2) disconnected
sd0 detached
atapibus1 detached
umass0 detached
umass0 at uhub0 port 1 configuration 1 interface 0
umass0: Generic USB Flash Disk, rev 1.10/1.00, addr 2
umass0: using ATAPI over Bulk-Only
atapibus1 at umass0 channel 0: 2 targets
sd0 at atapibus1 drive 0: <Generic, USB Flash Disk, 1.00> type 0 direct removable
sd0: 255 MB, 0 cyl, 0 head, 0 sec, 512 bytes/sect x 522368 sectors
sd0: no disk label
sd0: no disk label
umass0: at uhub0 port 1 (addr 2) disconnected
sd0 detached
atapibus1 detached
umass0 detached
umass0 at uhub0 port 1 configuration 1 interface 0
umass0: Western Digital FireWire/USB2.0 Combo, rev 2.00/ff.ff, addr 2
umass0: using SCSI over Bulk-Only
scsibus0 at umass0: 2 targets, 1 luns per target
scsibus0: waiting 2 seconds for devices to settle...
sd0 at scsibus0 target 1 lun 0: <WDC, WD800BB-75CAA0, 16.0> SCSI2 0/direct fixed
sd0: could not mode sense (4/5); using fictitious geometry
sd0: 76293 MB, 76293 cyl, 64 head, 32 sec, 512 bytes/sect x 156249072 sectors
sd0: could not mode sense (4/5); using fictitious geometry
sd0: no disk label
sd0: could not mode sense (4/5); using fictitious geometry
sd0: no disk label
sd0: could not mode sense (4/5); using fictitious geometry
sd0: no disk label
uid 0 comm mv on /: file system full
uid 0 comm mv on /: file system full
uid 0 comm mv on /: file system full
uid 0 comm mv on /: file system full
uid 0 comm mv on /: file system full
uid 0 comm mv on /: file system full
uid 0 comm mv on /: file system full
uid 0 comm mv on /: file system full
umass0: at uhub0 port 1 (addr 2) disconnected
sd0 detached
scsibus0 detached
umass0 detached
umass0 at uhub0 port 1 configuration 1 interface 0
umass0: Generic USB Flash Disk, rev 1.10/1.00, addr 2
umass0: using ATAPI over Bulk-Only
atapibus1 at umass0 channel 0: 2 targets
sd0 at atapibus1 drive 0: <Generic, USB Flash Disk, 1.00> type 0 direct removable
sd0: 255 MB, 0 cyl, 0 head, 0 sec, 512 bytes/sect x 522368 sectors
sd0: no disk label
sd0: no disk label
Attachment:
XFree86.0.log
Description: Binary data
