Hello Walde, could it be a problem with the window manager ?? -I don't know create a ~/.xinitrc file like: #~/.xinitrc xterm go with 'startx' again -> your should get a xterm window Veikko > -----Original Message----- > From: Walde Requena [mailto:walde@xxxxxxxxxxxxxx] > Sent: Thursday, January 22, 2004 3:09 PM > To: xfree86@xxxxxxxxxxx > Subject: RE: XFree86 don't work > > > hi Veikko, > > when i use startx, the monitor comes black (like if it is > going to work), but after 3 seconds i come to the console, > but now no error messages is displayed, just the informations > about the system, log file and the config file > > i tried XFree86 and the gray graphical screen appear (like > you said), then i kill the screen > > obs: i'm not finding any error too in my XFree log > > Walde > > > On Thu, 22 Jan 2004 14:27:17 +0100, "Veikko Werner" <veikko> escreveu: > > > De: "Veikko Werner" <veikko> > > Data: Thu, 22 Jan 2004 14:27:17 +0100 > > Para: <xfree86> > > Assunto: RE: XFree86 don't work > > > > Hello Walde, > > > > - normally a normal RedHat9 should work with your S3-Virge > card (I suppose it is one) > > - what exactly happens when you use 'startx' (I can't see > any error in your XFree log) > > - try 'XFree86' and tell what happens (normally a gray > graphical screen will appear wich you can kill with > CTRL-ALT-BACKSPACE) > > > > Veikko > > > > > > > -----Original Message----- > > > From: Walde Requena [mailto:walde@xxxxxxxxxxxxxx] > > > Sent: Thursday, January 22, 2004 2:10 PM > > > To: xfree86@xxxxxxxxxxx > > > Subject: XFree86 don't work > > > > > > > > > Hello Everyone, > > > > > > i need help with my XFree86, i tried startx but didn't work > > > i'm using a Red Had 9 linux OS > > > first i had the font path error, then i remove the wrong > > > lines and add new ones ( how i found at another email) > > > the font path error disapear, but startx still dont work > > > > > > Can someone help me, please? > > > > > > thank's > > > Walde > > > > > > > > > On the XFree86.0.log is written: > > > > > > ************************************************ > > > XFree86 Version 4.3.0 (Red Hat Linux release: 4.3.0-2) > > > Release Date: 27 February 2003 > > > X Protocol Version 11, Revision 0, Release 6.6 > > > Build Operating System: Linux 2.4.20-3bigmem i686 [ELF] > > > Build Date: 27 February 2003 > > > Build Host: porky.devel.redhat.com > > > > > > Before reporting problems, check http://www.XFree86.Org/ > > > to make sure that you have the latest version. > > > Module Loader present > > > OS Kernel: Linux version 2.4.20-8 > > > (bhcompile@xxxxxxxxxxxxxxxxxxxxxx) (gcc version 3.2.2 > > > 20030222 (Red Hat Linux 3.2.2-5)) #1 Thu Mar 13 17:54:28 EST 2003 > > > Markers: (--) probed, (**) from config file, (==) default setting, > > > (++) from command line, (!!) notice, (II) informational, > > > (WW) warning, (EE) error, (NI) not implemented, > (??) unknown. > > > (==) Log file: "/var/log/XFree86.0.log", Time: Thu Jan 22 > > > 10:56:36 2004 > > > (==) Using config file: "/etc/X11/XF86Config" > > > (==) ServerLayout "Default Layout" > > > (**) |-->Screen "Screen0" (0) > > > (**) | |-->Monitor "Monitor0" > > > (**) | |-->Device "Videocard0" > > > (**) |-->Input Device "Mouse0" > > > (**) |-->Input Device "Keyboard0" > > > (**) Option "XkbRules" "xfree86" > > > (**) XKB: rules: "xfree86" > > > (**) Option "XkbModel" "abnt2" > > > (**) XKB: model: "abnt2" > > > (**) Option "XkbLayout" "br" > > > (**) XKB: layout: "br" > > > (==) Keyboard: CustomKeycode disabled > > > (**) |-->Input Device "DevInputMice" > > > (**) FontPath set to > > > "/usr/X11R6/lib/X11/fonts/local/,/usr/X11R6/lib/X11/fonts/misc > > > /,/usr/X11R6/lib/X11/fonts/75dpi/:unscaled,/usr/X11R6/lib/X11/ > > > fonts/100dpi/:unscaled,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X1 > > > 1R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/" > > > (**) RgbPath set to "/usr/X11R6/lib/X11/rgb" > > > (==) ModulePath set to "/usr/X11R6/lib/modules" > > > (--) using VT number 7 > > > > > > (II) Open APM successful > > > (II) Module ABI versions: > > > XFree86 ANSI C Emulation: 0.2 > > > XFree86 Video Driver: 0.6 > > > XFree86 XInput driver : 0.4 > > > XFree86 Server Extension : 0.2 > > > XFree86 Font Renderer : 0.4 > > > (II) Loader running on linux > > > (II) LoadModule: "bitmap" > > > (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a > > > (II) Module bitmap: vendor="The XFree86 Project" > > > compiled for 4.3.0, module version = 1.0.0 > > > Module class: XFree86 Font Renderer > > > ABI class: XFree86 Font Renderer, version 0.4 > > > (II) Loading font Bitmap > > > (II) LoadModule: "pcidata" > > > (II) Loading /usr/X11R6/lib/modules/libpcidata.a > > > (II) Module pcidata: vendor="The XFree86 Project" > > > compiled for 4.3.0, module version = 1.0.0 > > > ABI class: XFree86 Video Driver, version 0.6 > > > (II) PCI: Probing config type using method 1 > > > (II) PCI: Config type is 1 > > > (II) PCI: stages = 0x03, oldVal1 = 0x00000000, mode1Res1 > = 0x80000000 > > > (II) PCI: PCI scan (all values are in hex) > > > (II) PCI: 00:00:0: chip 8086,7190 card 0000,0000 rev 03 class > > > 06,00,00 hdr 00 > > > (II) PCI: 00:01:0: chip 8086,7191 card 0000,0000 rev 03 class > > > 06,04,00 hdr 01 > > > (II) PCI: 00:04:0: chip 8086,7110 card 0000,0000 rev 02 class > > > 06,01,00 hdr 80 > > > (II) PCI: 00:04:1: chip 8086,7111 card 0000,0000 rev 01 class > > > 01,01,80 hdr 00 > > > (II) PCI: 00:04:2: chip 8086,7112 card 0000,0000 rev 01 class > > > 0c,03,00 hdr 00 > > > (II) PCI: 00:04:3: chip 8086,7113 card 0000,0000 rev 02 class > > > 06,80,00 hdr 00 > > > (II) PCI: 00:09:0: chip 5333,8a01 card 5333,8a01 rev 01 class > > > 03,00,00 hdr 00 > > > (II) PCI: 00:0a:0: chip 1013,6003 card 0000,0000 rev 01 class > > > 04,01,00 hdr 00 > > > (II) PCI: 00:0b:0: chip 10ec,8139 card 10ec,8139 rev 10 class > > > 02,00,00 hdr 00 > > > (II) PCI: End of PCI scan > > > (II) Host-to-PCI bridge: > > > (II) Bus 0: bridge is at (0:0:0), (0,0,1), BCTRL: 0x0008 > > > (VGA_EN is set) > > > (II) Bus 0 I/O range: > > > [0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B] > > > (II) Bus 0 non-prefetchable memory range: > > > [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B] > > > (II) Bus 0 prefetchable memory range: > > > [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B] > > > (II) PCI-to-PCI bridge: > > > (II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x0080 > > > (VGA_EN is cleared) > > > (II) PCI-to-ISA bridge: > > > (II) Bus -1: bridge is at (0:4:0), (0,-1,-1), BCTRL: 0x0008 > > > (VGA_EN is set) > > > (--) PCI:*(0:9:0) S3 Inc. ViRGE/DX or /GX rev 1, Mem @ > > > 0xdc000000/26, BIOS @ 0x000c0000/16 > > > (II) Addressable bus resource ranges are > > > [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B] > > > [1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B] > > > (II) OS-reported resource ranges: > > > [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) > > > [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) > > > [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] > > > [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] > > > [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] > > > [5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] > > > [6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] > > > (II) PCI Memory resource overlap reduced 0xe4000000 from > > > 0xe7ffffff to 0xe3ffffff > > > (II) Active PCI resource ranges: > > > [0] -1 0 0xda800000 - 0xda8000ff (0x100) MX[B] > > > [1] -1 0 0xdb000000 - 0xdb0fffff (0x100000) MX[B] > > > [2] -1 0 0xdb800000 - 0xdb800fff (0x1000) MX[B] > > > [3] -1 0 0xe4000000 - 0xe3ffffff (0x0) MX[B]O > > > [4] -1 0 0x000c0000 - 0x000cffff (0x10000) MX[B](B) > > > [5] -1 0 0xdc000000 - 0xdfffffff (0x4000000) MX[B](B) > > > [6] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[B] > > > [7] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[B] > > > [8] -1 0 0x0000d800 - 0x0000d80f (0x10) IX[B] > > > (II) Active PCI resource ranges after removing overlaps: > > > [0] -1 0 0xda800000 - 0xda8000ff (0x100) MX[B] > > > [1] -1 0 0xdb000000 - 0xdb0fffff (0x100000) MX[B] > > > [2] -1 0 0xdb800000 - 0xdb800fff (0x1000) MX[B] > > > [3] -1 0 0xe4000000 - 0xe3ffffff (0x0) MX[B]O > > > [4] -1 0 0x000c0000 - 0x000cffff (0x10000) MX[B](B) > > > [5] -1 0 0xdc000000 - 0xdfffffff (0x4000000) MX[B](B) > > > [6] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[B] > > > [7] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[B] > > > [8] -1 0 0x0000d800 - 0x0000d80f (0x10) IX[B] > > > (II) OS-reported resource ranges after removing overlaps with PCI: > > > [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) > > > [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) > > > [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] > > > [3] -1 0 0x000c0000 - 0x000cffff (0x10000) MX[B] > > > [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] > > > [5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] > > > [6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] > > > (II) All system resource ranges: > > > [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) > > > [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) > > > [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] > > > [3] -1 0 0x000c0000 - 0x000cffff (0x10000) MX[B] > > > [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] > > > [5] -1 0 0xda800000 - 0xda8000ff (0x100) MX[B] > > > [6] -1 0 0xdb000000 - 0xdb0fffff (0x100000) MX[B] > > > [7] -1 0 0xdb800000 - 0xdb800fff (0x1000) MX[B] > > > [8] -1 0 0xe4000000 - 0xe3ffffff (0x0) MX[B]O > > > [9] -1 0 0x000c0000 - 0x000cffff (0x10000) MX[B](B) > > > [10] -1 0 0xdc000000 - 0xdfffffff (0x4000000) MX[B](B) > > > [11] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] > > > [12] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] > > > [13] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[B] > > > [14] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[B] > > > [15] -1 0 0x0000d800 - 0x0000d80f (0x10) IX[B] > > > (II) LoadModule: "dbe" > > > (II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a > > > (II) Module dbe: vendor="The XFree86 Project" > > > compiled for 4.3.0, module version = 1.0.0 > > > Module class: XFree86 Server Extension > > > ABI class: XFree86 Server Extension, version 0.2 > > > (II) Loading extension DOUBLE-BUFFER > > > (II) LoadModule: "extmod" > > > (II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a > > > (II) Module extmod: vendor="The XFree86 Project" > > > compiled for 4.3.0, module version = 1.0.0 > > > Module class: XFree86 Server Extension > > > ABI class: XFree86 Server Extension, version 0.2 > > > (II) Loading extension SHAPE > > > (II) Loading extension MIT-SUNDRY-NONSTANDARD > > > (II) Loading extension BIG-REQUESTS > > > (II) Loading extension SYNC > > > (II) Loading extension MIT-SCREEN-SAVER > > > (II) Loading extension XC-MISC > > > (II) Loading extension XFree86-VidModeExtension > > > (II) Loading extension XFree86-Misc > > > (II) Loading extension XFree86-DGA > > > (II) Loading extension DPMS > > > (II) Loading extension FontCache > > > (II) Loading extension TOG-CUP > > > (II) Loading extension Extended-Visual-Information > > > (II) Loading extension XVideo > > > (II) Loading extension XVideo-MotionCompensation > > > (II) Loading extension X-Resource > > > (II) LoadModule: "fbdevhw" > > > (II) Loading /usr/X11R6/lib/modules/linux/libfbdevhw.a > > > (II) Module fbdevhw: vendor="The XFree86 Project" > > > compiled for 4.3.0, module version = 0.0.2 > > > ABI class: XFree86 Video Driver, version 0.6 > > > (II) LoadModule: "glx" > > > (II) Loading /usr/X11R6/lib/modules/extensions/libglx.a > > > (II) Module glx: vendor="The XFree86 Project" > > > compiled for 4.3.0, module version = 1.0.0 > > > ABI class: XFree86 Server Extension, version 0.2 > > > (II) Loading sub module "GLcore" > > > (II) LoadModule: "GLcore" > > > (II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a > > > (II) Module GLcore: vendor="The XFree86 Project" > > > compiled for 4.3.0, module version = 1.0.0 > > > ABI class: XFree86 Server Extension, version 0.2 > > > (II) Loading extension GLX > > > (II) LoadModule: "record" > > > (II) Loading /usr/X11R6/lib/modules/extensions/librecord.a > > > (II) Module record: vendor="The XFree86 Project" > > > compiled for 4.3.0, module version = 1.13.0 > > > Module class: XFree86 Server Extension > > > ABI class: XFree86 Server Extension, version 0.2 > > > (II) Loading extension RECORD > > > (II) LoadModule: "freetype" > > > (II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.a > > > (II) Module freetype: vendor="The XFree86 Project" > > > compiled for 4.3.0, module version = 2.0.2 > > > Module class: XFree86 Font Renderer > > > ABI class: XFree86 Font Renderer, version 0.4 > > > (II) Loading font FreeType > > > (II) LoadModule: "type1" > > > (II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a > > > (II) Module type1: vendor="The XFree86 Project" > > > compiled for 4.3.0, module version = 1.0.2 > > > Module class: XFree86 Font Renderer > > > ABI class: XFree86 Font Renderer, version 0.4 > > > (II) Loading font Type1 > > > (II) Loading font CID > > > (II) LoadModule: "dri" > > > (II) Loading /usr/X11R6/lib/modules/extensions/libdri.a > > > (II) Module dri: vendor="The XFree86 Project" > > > compiled for 4.3.0, module version = 1.0.0 > > > ABI class: XFree86 Server Extension, version 0.2 > > > (II) Loading sub module "drm" > > > (II) LoadModule: "drm" > > > (II) Loading /usr/X11R6/lib/modules/linux/libdrm.a > > > (II) Module drm: vendor="The XFree86 Project" > > > compiled for 4.3.0, module version = 1.0.0 > > > ABI class: XFree86 Server Extension, version 0.2 > > > (II) Loading extension XFree86-DRI > > > (II) LoadModule: "s3virge" > > > (II) Loading /usr/X11R6/lib/modules/drivers/s3virge_drv.o > > > (II) Module s3virge: vendor="The XFree86 Project" > > > compiled for 4.3.0, module version = 1.8.6 > > > Module class: XFree86 Video Driver > > > ABI class: XFree86 Video Driver, version 0.6 > > > (II) LoadModule: "mouse" > > > (II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o > > > (II) Module mouse: vendor="The XFree86 Project" > > > compiled for 4.3.0, module version = 1.0.0 > > > Module class: XFree86 XInput Driver > > > ABI class: XFree86 XInput driver, version 0.4 > > > (II) S3VIRGE: driver (version 1.8.6) for S3 ViRGE chipsets: > > > virge, 86C325, > > > virge vx, 86C988, virge dx, virge gx, 86C375, 86C385, virge gx2, > > > 86C357, virge mx, 86C260, virge mx+, 86C280, trio 3d, 86C365, > > > trio 3d/2x, 86C362, 86C368 > > > (II) Primary Device is: PCI 00:09:0 > > > (--) Assigning device section with no busID to primary device > > > (--) Chipset virge dx found > > > (II) resource ranges after xf86ClaimFixedResources() call: > > > [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) > > > [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) > > > [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] > > > [3] -1 0 0x000c0000 - 0x000cffff (0x10000) MX[B] > > > [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] > > > [5] -1 0 0xda800000 - 0xda8000ff (0x100) MX[B] > > > [6] -1 0 0xdb000000 - 0xdb0fffff (0x100000) MX[B] > > > [7] -1 0 0xdb800000 - 0xdb800fff (0x1000) MX[B] > > > [8] -1 0 0xe4000000 - 0xe3ffffff (0x0) MX[B]O > > > [9] -1 0 0x000c0000 - 0x000cffff (0x10000) MX[B](B) > > > [10] -1 0 0xdc000000 - 0xdfffffff (0x4000000) MX[B](B) > > > [11] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] > > > [12] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] > > > [13] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[B] > > > [14] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[B] > > > [15] -1 0 0x0000d800 - 0x0000d80f (0x10) IX[B] > > > (II) resource ranges after probing: > > > [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) > > > [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) > > > [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] > > > [3] -1 0 0x000c0000 - 0x000cffff (0x10000) MX[B] > > > [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] > > > [5] -1 0 0xda800000 - 0xda8000ff (0x100) MX[B] > > > [6] -1 0 0xdb000000 - 0xdb0fffff (0x100000) MX[B] > > > [7] -1 0 0xdb800000 - 0xdb800fff (0x1000) MX[B] > > > [8] -1 0 0xe4000000 - 0xe3ffffff (0x0) MX[B]O > > > [9] -1 0 0x000c0000 - 0x000cffff (0x10000) MX[B](B) > > > [10] -1 0 0xdc000000 - 0xdfffffff (0x4000000) MX[B](B) > > > [11] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B] > > > [12] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B] > > > [13] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B] > > > [14] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] > > > [15] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] > > > [16] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[B] > > > [17] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[B] > > > [18] -1 0 0x0000d800 - 0x0000d80f (0x10) IX[B] > > > [19] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B] > > > [20] 0 0 0x000003c0 - 0x000003df (0x20) IS[B] > > > (II) Setting vga for screen 0. > > > (II) Loading sub module "vgahw" > > > (II) LoadModule: "vgahw" > > > (II) Loading /usr/X11R6/lib/modules/libvgahw.a > > > (II) Module vgahw: vendor="The XFree86 Project" > > > compiled for 4.3.0, module version = 0.1.0 > > > ABI class: XFree86 Video Driver, version 0.6 > > > (**) S3VIRGE(0): Depth 8, (--) framebuffer bpp 8 > > > (==) S3VIRGE(0): Default visual is PseudoColor > > > (==) S3VIRGE(0): Using HW Cursor > > > (==) S3VIRGE(0): Using fb. > > > (==) S3VIRGE(0): mx_cr3a_fix. > > > (II) Loading sub module "vbe" > > > (II) LoadModule: "vbe" > > > (II) Loading /usr/X11R6/lib/modules/libvbe.a > > > (II) Module vbe: vendor="The XFree86 Project" > > > compiled for 4.3.0, module version = 1.1.0 > > > ABI class: XFree86 Video Driver, version 0.6 > > > (II) Loading sub module "int10" > > > (II) LoadModule: "int10" > > > (II) Loading /usr/X11R6/lib/modules/linux/libint10.a > > > (II) Module int10: vendor="The XFree86 Project" > > > compiled for 4.3.0, module version = 1.0.0 > > > ABI class: XFree86 Video Driver, version 0.6 > > > (II) S3VIRGE(0): initializing int10 > > > (II) S3VIRGE(0): Primary V_BIOS segment is: 0xc000 > > > (II) S3VIRGE(0): VESA BIOS detected > > > (II) S3VIRGE(0): VESA VBE Version 2.0 > > > (II) S3VIRGE(0): VESA VBE Total Mem: 2048 kB > > > (II) S3VIRGE(0): VESA VBE OEM: S3 Incorporated. 86C375/86C385 > > > (II) S3VIRGE(0): VESA VBE OEM Software Rev: 2.0 > > > (II) S3VIRGE(0): VESA VBE OEM Vendor: Diamond Multimedia > Systems, Inc. > > > (II) S3VIRGE(0): VESA VBE OEM Product: Stealth 3D 2000 Pro > > > (II) S3VIRGE(0): VESA VBE OEM Product Rev: V1.0 > > > (--) S3VIRGE(0): Chipset: "virge dx" > > > (==) S3VIRGE(0): XVideo not supported. > > > (II) S3VIRGE(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, > > > hwp->PIOOffset is 0x0000 > > > (II) S3VIRGE(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, > > > hwp->PIOOffset is 0x0000 > > > (II) Loading sub module "ddc" > > > (II) LoadModule: "ddc" > > > (II) Loading /usr/X11R6/lib/modules/libddc.a > > > (II) Module ddc: vendor="The XFree86 Project" > > > compiled for 4.3.0, module version = 1.0.0 > > > ABI class: XFree86 Video Driver, version 0.6 > > > (II) Loading sub module "ddc" > > > (II) LoadModule: "ddc" > > > (II) Reloading /usr/X11R6/lib/modules/libddc.a > > > (II) S3VIRGE(0): VESA VBE DDC supported > > > (II) S3VIRGE(0): VESA VBE DDC Level 2 > > > (II) S3VIRGE(0): VESA VBE DDC transfer in appr. 1 sec. > > > (II) S3VIRGE(0): VESA VBE DDC read successfully > > > (II) S3VIRGE(0): Manufacturer: SAM Model: 1035 Serial#: > 1146368309 > > > (II) S3VIRGE(0): Year: 2000 Week: 32 > > > (II) S3VIRGE(0): EDID Version: 1.1 > > > (II) S3VIRGE(0): Analog Display Input, Input Voltage Level: > > > 0.700/0.700 V > > > (II) S3VIRGE(0): Sync: Separate > > > (II) S3VIRGE(0): Max H-Image Size [cm]: horiz.: 28 vert.: 21 > > > (II) S3VIRGE(0): Gamma: 2.12 > > > (II) S3VIRGE(0): DPMS capabilities: StandBy Suspend Off; > > > RGB/Color Display > > > (II) S3VIRGE(0): redX: 0.632 redY: 0.335 greenX: 0.295 > greenY: 0.593 > > > (II) S3VIRGE(0): blueX: 0.143 blueY: 0.066 whiteX: 0.283 > > > whiteY: 0.298 > > > (II) S3VIRGE(0): Supported VESA Video Modes: > > > (II) S3VIRGE(0): 720x400@70Hz > > > (II) S3VIRGE(0): 720x400@88Hz > > > (II) S3VIRGE(0): 640x480@60Hz > > > (II) S3VIRGE(0): 640x480@67Hz > > > (II) S3VIRGE(0): 640x480@72Hz > > > (II) S3VIRGE(0): 640x480@75Hz > > > (II) S3VIRGE(0): 800x600@56Hz > > > (II) S3VIRGE(0): 800x600@60Hz > > > (II) S3VIRGE(0): 800x600@72Hz > > > (II) S3VIRGE(0): 800x600@75Hz > > > (II) S3VIRGE(0): 832x624@75Hz > > > (II) S3VIRGE(0): 1024x768@87Hz (interlaced) > > > (II) S3VIRGE(0): 1024x768@60Hz > > > (II) S3VIRGE(0): 1024x768@70Hz > > > (II) S3VIRGE(0): 1024x768@75Hz > > > (II) S3VIRGE(0): Manufacturer's mask: 0 > > > (II) S3VIRGE(0): Supported Future Video Modes: > > > (II) S3VIRGE(0): #0: hsize: 640 vsize 480 refresh: 85 > vid: 22833 > > > (II) S3VIRGE(0): #1: hsize: 800 vsize 600 refresh: 85 > vid: 22853 > > > (II) S3VIRGE(0): #2: hsize: 1024 vsize 768 refresh: 75 > vid: 20321 > > > (II) S3VIRGE(0): Supported additional Video Mode: > > > (II) S3VIRGE(0): clock: 36.0 MHz Image Size: 267 x 200 mm > > > (II) S3VIRGE(0): h_active: 640 h_sync: 696 h_sync_end 752 > > > h_blank_end 832 h_border: 0 > > > (II) S3VIRGE(0): v_active: 480 v_sync: 481 v_sync_end 484 > > > v_blanking: 509 v_border: 0 > > > (II) S3VIRGE(0): Supported additional Video Mode: > > > (II) S3VIRGE(0): clock: 56.2 MHz Image Size: 267 x 200 mm > > > (II) S3VIRGE(0): h_active: 800 h_sync: 832 h_sync_end 896 > > > h_blank_end 1048 h_border: 0 > > > (II) S3VIRGE(0): v_active: 600 v_sync: 601 v_sync_end 604 > > > v_blanking: 631 v_border: 0 > > > (II) S3VIRGE(0): Ranges: V min: 50 V max: 120 Hz, H min: 30 > > > H max: 61 kHz, PixClock max 80 MHz > > > (II) S3VIRGE(0): Serial No: HXBN800007 > > > (==) S3VIRGE(0): Using gamma correction (1.0, 1.0, 1.0) > > > (--) S3VIRGE(0): videoram: 2048k > > > (--) S3VIRGE(0): Detected current MCLK value of 72.187 MHz > > > (II) S3VIRGE(0): Monitor0: Using hsync range of 30.00-61.00 kHz > > > (II) S3VIRGE(0): Monitor0: Using vrefresh range of 50.00-120.00 Hz > > > (II) S3VIRGE(0): Clock range: 10.00 to 270.00 MHz > > > (II) S3VIRGE(0): Not using default mode "1024x768" (hsync out > > > of range) > > > (II) S3VIRGE(0): Not using default mode "512x384" (hsync > out of range) > > > (II) S3VIRGE(0): Not using default mode "1152x864" (hsync out > > > of range) > > > (II) S3VIRGE(0): Not using default mode "576x432" (hsync > out of range) > > > (WW) (1280x960,Monitor0) mode clock 108MHz exceeds DDC > maximum 80MHz > > > (II) S3VIRGE(0): Not using default mode "1280x960" (hsync out > > > of range) > > > (II) S3VIRGE(0): Not using default mode "640x480" (hsync > out of range) > > > (II) S3VIRGE(0): Not using default mode "1280x1024" (hsync > > > out of range) > > > (II) S3VIRGE(0): Not using default mode "640x512" (hsync > out of range) > > > (II) S3VIRGE(0): Not using default mode "1280x1024" (hsync > > > out of range) > > > (II) S3VIRGE(0): Not using default mode "640x512" (hsync > out of range) > > > (II) S3VIRGE(0): Not using default mode "1280x1024" (hsync > > > out of range) > > > (II) S3VIRGE(0): Not using default mode "640x512" (hsync > out of range) > > > (II) S3VIRGE(0): Not using default mode "1600x1200" > > > (horizontal timing out of range) > > > (II) S3VIRGE(0): Not using default mode "800x600" (hsync > out of range) > > > (II) S3VIRGE(0): Not using default mode "1600x1200" > > > (horizontal timing out of range) > > > (II) S3VIRGE(0): Not using default mode "800x600" (hsync > out of range) > > > (II) S3VIRGE(0): Not using default mode "1600x1200" > > > (horizontal timing out of range) > > > (II) S3VIRGE(0): Not using default mode "800x600" (hsync > out of range) > > > (II) S3VIRGE(0): Not using default mode "1600x1200" > > > (horizontal timing out of range) > > > (II) S3VIRGE(0): Not using default mode "800x600" (hsync > out of range) > > > (II) S3VIRGE(0): Not using default mode "1600x1200" > > > (horizontal timing out of range) > > > (II) S3VIRGE(0): Not using default mode "800x600" (hsync > out of range) > > > (II) S3VIRGE(0): Not using default mode "1792x1344" > > > (insufficient memory for mode) > > > (II) S3VIRGE(0): Not using default mode "896x672" (hsync > out of range) > > > (II) S3VIRGE(0): Not using default mode "1792x1344" > > > (insufficient memory for mode) > > > (II) S3VIRGE(0): Not using default mode "896x672" (hsync > out of range) > > > (II) S3VIRGE(0): Not using default mode "1856x1392" > > > (insufficient memory for mode) > > > (II) S3VIRGE(0): Not using default mode "928x696" (hsync > out of range) > > > (II) S3VIRGE(0): Not using default mode "1856x1392" > > > (insufficient memory for mode) > > > (II) S3VIRGE(0): Not using default mode "928x696" (hsync > out of range) > > > (II) S3VIRGE(0): Not using default mode "1920x1440" > > > (insufficient memory for mode) > > > (II) S3VIRGE(0): Not using default mode "960x720" (hsync > out of range) > > > (II) S3VIRGE(0): Not using default mode "1920x1440" > > > (insufficient memory for mode) > > > (II) S3VIRGE(0): Not using default mode "960x720" (hsync > out of range) > > > (II) S3VIRGE(0): Not using default mode "1152x864" (hsync out > > > of range) > > > (II) S3VIRGE(0): Not using default mode "576x432" (hsync > out of range) > > > (II) S3VIRGE(0): Not using default mode "1400x1050" (hsync > > > out of range) > > > (II) S3VIRGE(0): Not using default mode "700x525" (hsync > out of range) > > > (II) S3VIRGE(0): Not using default mode "1400x1050" (hsync > > > out of range) > > > (II) S3VIRGE(0): Not using default mode "700x525" (hsync > out of range) > > > (II) S3VIRGE(0): Not using default mode "1400x1050" (hsync > > > out of range) > > > (II) S3VIRGE(0): Not using default mode "700x525" (hsync > out of range) > > > (II) S3VIRGE(0): Not using default mode "1400x1050" (hsync > > > out of range) > > > (II) S3VIRGE(0): Not using default mode "700x525" (hsync > out of range) > > > (II) S3VIRGE(0): Not using default mode "1600x1024" (hsync > > > out of range) > > > (II) S3VIRGE(0): Not using default mode "800x512" (hsync > out of range) > > > (II) S3VIRGE(0): Not using default mode "1920x1200" > > > (insufficient memory for mode) > > > (II) S3VIRGE(0): Not using default mode "960x600" (hsync > out of range) > > > (II) S3VIRGE(0): Not using default mode "1920x1440" > > > (insufficient memory for mode) > > > (II) S3VIRGE(0): Not using default mode "960x720" (hsync > out of range) > > > (II) S3VIRGE(0): Not using default mode "2048x1536" > > > (insufficient memory for mode) > > > (II) S3VIRGE(0): Not using default mode "1024x768" (hsync out > > > of range) > > > (II) S3VIRGE(0): Not using default mode "2048x1536" > > > (insufficient memory for mode) > > > (II) S3VIRGE(0): Not using default mode "1024x768" (hsync out > > > of range) > > > (II) S3VIRGE(0): Not using default mode "2048x1536" > > > (insufficient memory for mode) > > > (II) S3VIRGE(0): Not using default mode "1024x768" (hsync out > > > of range) > > > (II) S3VIRGE(0): Not using default mode "1280x960" (width too > > > large for virtual size) > > > (II) S3VIRGE(0): Not using default mode "1152x768" (width too > > > large for virtual size) > > > (--) S3VIRGE(0): Virtual size is 1024x768 (pitch 1024) > > > (**) S3VIRGE(0): *Default mode "1024x768": 78.8 MHz, 60.1 > kHz, 75.1 Hz > > > (II) S3VIRGE(0): Modeline "1024x768" 78.80 1024 1040 1136 > > > 1312 768 769 772 800 +hsync +vsync > > > (**) S3VIRGE(0): *Default mode "800x600": 56.3 MHz, 53.7 > kHz, 85.1 Hz > > > (II) S3VIRGE(0): Modeline "800x600" 56.30 800 832 896 1048 > > > 600 601 604 631 +hsync +vsync > > > (**) S3VIRGE(0): *Default mode "640x480": 36.0 MHz, 43.3 > kHz, 85.0 Hz > > > (II) S3VIRGE(0): Modeline "640x480" 36.00 640 696 752 832 > > > 480 481 484 509 -hsync -vsync > > > (**) S3VIRGE(0): Default mode "1024x768": 75.0 MHz, 56.5 > kHz, 70.1 Hz > > > (II) S3VIRGE(0): Modeline "1024x768" 75.00 1024 1048 1184 > > > 1328 768 771 777 806 -hsync -vsync > > > (**) S3VIRGE(0): Default mode "1024x768": 65.0 MHz, 48.4 > kHz, 60.0 Hz > > > (II) S3VIRGE(0): Modeline "1024x768" 65.00 1024 1048 1184 > > > 1344 768 771 777 806 -hsync -vsync > > > (**) S3VIRGE(0): Default mode "1024x768": 44.9 MHz, 35.5 > > > kHz, 87.1 Hz (I) > > > (II) S3VIRGE(0): Modeline "1024x768" 44.90 1024 1032 1208 > > > 1264 768 768 776 817 interlace +hsync +vsync > > > (**) S3VIRGE(0): Default mode "832x624": 57.3 MHz, 49.7 > kHz, 74.6 Hz > > > (II) S3VIRGE(0): Modeline "832x624" 57.28 832 864 928 1152 > > > 624 625 628 667 -hsync -vsync > > > (**) S3VIRGE(0): Default mode "800x600": 49.5 MHz, 46.9 > kHz, 75.0 Hz > > > (II) S3VIRGE(0): Modeline "800x600" 49.50 800 816 896 1056 > > > 600 601 604 625 +hsync +vsync > > > (**) S3VIRGE(0): Default mode "800x600": 50.0 MHz, 48.1 > kHz, 72.2 Hz > > > (II) S3VIRGE(0): Modeline "800x600" 50.00 800 856 976 1040 > > > 600 637 643 666 +hsync +vsync > > > (**) S3VIRGE(0): Default mode "800x600": 40.0 MHz, 37.9 > kHz, 60.3 Hz > > > (II) S3VIRGE(0): Modeline "800x600" 40.00 800 840 968 1056 > > > 600 601 605 628 +hsync +vsync > > > (**) S3VIRGE(0): Default mode "800x600": 36.0 MHz, 35.2 > kHz, 56.2 Hz > > > (II) S3VIRGE(0): Modeline "800x600" 36.00 800 824 896 1024 > > > 600 601 603 625 +hsync +vsync > > > (**) S3VIRGE(0): Default mode "640x480": 31.5 MHz, 37.5 > kHz, 75.0 Hz > > > (II) S3VIRGE(0): Modeline "640x480" 31.50 640 656 720 840 > > > 480 481 484 500 -hsync -vsync > > > (**) S3VIRGE(0): Default mode "640x480": 31.5 MHz, 37.9 > kHz, 72.8 Hz > > > (II) S3VIRGE(0): Modeline "640x480" 31.50 640 664 704 832 > > > 480 489 491 520 -hsync -vsync > > > (**) S3VIRGE(0): Default mode "640x480": 25.2 MHz, 31.5 > kHz, 60.0 Hz > > > (II) S3VIRGE(0): Modeline "640x480" 25.20 640 656 752 800 > > > 480 490 492 525 -hsync -vsync > > > (**) S3VIRGE(0): Default mode "640x480": 54.0 MHz, 60.0 kHz, > > > 60.0 Hz (D) > > > (II) S3VIRGE(0): Modeline "640x480" 54.00 640 688 744 900 > > > 480 480 482 500 doublescan +hsync +vsync > > > (**) S3VIRGE(0): Default mode "720x400": 35.5 MHz, 37.9 > kHz, 85.0 Hz > > > (II) S3VIRGE(0): Modeline "720x400" 35.50 720 756 828 936 > > > 400 401 404 446 -hsync +vsync > > > (**) S3VIRGE(0): Default mode "640x400": 31.5 MHz, 37.9 > kHz, 85.1 Hz > > > (II) S3VIRGE(0): Modeline "640x400" 31.50 640 672 736 832 > > > 400 401 404 445 -hsync +vsync > > > (**) S3VIRGE(0): Default mode "640x350": 31.5 MHz, 37.9 > kHz, 85.1 Hz > > > (II) S3VIRGE(0): Modeline "640x350" 31.50 640 672 736 832 > > > 350 382 385 445 +hsync -vsync > > > (**) S3VIRGE(0): Default mode "576x384": 32.5 MHz, 44.2 kHz, > > > 54.8 Hz (D) > > > (II) S3VIRGE(0): Modeline "576x384" 32.50 576 589 657 736 > > > 384 385 388 403 doublescan +hsync +vsync > > > (**) S3VIRGE(0): Default mode "512x384": 39.4 MHz, 60.1 kHz, > > > 75.1 Hz (D) > > > (II) S3VIRGE(0): Modeline "512x384" 39.40 512 520 568 656 > > > 384 384 386 400 doublescan +hsync +vsync > > > (**) S3VIRGE(0): Default mode "512x384": 37.5 MHz, 56.5 kHz, > > > 70.1 Hz (D) > > > (II) S3VIRGE(0): Modeline "512x384" 37.50 512 524 592 664 > > > 384 385 388 403 doublescan -hsync -vsync > > > (**) S3VIRGE(0): Default mode "512x384": 32.5 MHz, 48.4 kHz, > > > 60.0 Hz (D) > > > (II) S3VIRGE(0): Modeline "512x384" 32.50 512 524 592 672 > > > 384 385 388 403 doublescan -hsync -vsync > > > (**) S3VIRGE(0): Default mode "512x384": 22.4 MHz, 35.5 kHz, > > > 87.1 Hz (D) > > > (II) S3VIRGE(0): Modeline "512x384" 22.45 512 516 604 632 > > > 384 384 388 409 interlace doublescan +hsync +vsync > > > (**) S3VIRGE(0): Default mode "416x312": 28.6 MHz, 49.7 kHz, > > > 74.7 Hz (D) > > > (II) S3VIRGE(0): Modeline "416x312" 28.64 416 432 464 576 > > > 312 312 314 333 doublescan -hsync -vsync > > > (**) S3VIRGE(0): Default mode "400x300": 28.1 MHz, 53.7 kHz, > > > 85.3 Hz (D) > > > (II) S3VIRGE(0): Modeline "400x300" 28.15 400 416 448 524 > > > 300 300 302 315 doublescan +hsync +vsync > > > (**) S3VIRGE(0): Default mode "400x300": 24.8 MHz, 46.9 kHz, > > > 75.1 Hz (D) > > > (II) S3VIRGE(0): Modeline "400x300" 24.75 400 408 448 528 > > > 300 300 302 312 doublescan +hsync +vsync > > > (**) S3VIRGE(0): Default mode "400x300": 25.0 MHz, 48.1 kHz, > > > 72.2 Hz (D) > > > (II) S3VIRGE(0): Modeline "400x300" 25.00 400 428 488 520 > > > 300 318 321 333 doublescan +hsync +vsync > > > (**) S3VIRGE(0): Default mode "400x300": 20.0 MHz, 37.9 kHz, > > > 60.3 Hz (D) > > > (II) S3VIRGE(0): Modeline "400x300" 20.00 400 420 484 528 > > > 300 300 302 314 doublescan +hsync +vsync > > > (**) S3VIRGE(0): Default mode "400x300": 18.0 MHz, 35.2 kHz, > > > 56.3 Hz (D) > > > (II) S3VIRGE(0): Modeline "400x300" 18.00 400 412 448 512 > > > 300 300 301 312 doublescan +hsync +vsync > > > (**) S3VIRGE(0): Default mode "320x240": 18.0 MHz, 43.3 kHz, > > > 85.2 Hz (D) > > > (II) S3VIRGE(0): Modeline "320x240" 18.00 320 348 376 416 > > > 240 240 242 254 doublescan -hsync -vsync > > > (**) S3VIRGE(0): Default mode "320x240": 15.8 MHz, 37.5 kHz, > > > 75.0 Hz (D) > > > (II) S3VIRGE(0): Modeline "320x240" 15.75 320 328 360 420 > > > 240 240 242 250 doublescan -hsync -vsync > > > (**) S3VIRGE(0): Default mode "320x240": 15.8 MHz, 37.9 kHz, > > > 72.8 Hz (D) > > > (II) S3VIRGE(0): Modeline "320x240" 15.75 320 332 352 416 > > > 240 244 245 260 doublescan -hsync -vsync > > > (**) S3VIRGE(0): Default mode "320x240": 12.6 MHz, 31.5 kHz, > > > 60.1 Hz (D) > > > (II) S3VIRGE(0): Modeline "320x240" 12.60 320 328 376 400 > > > 240 245 246 262 doublescan -hsync -vsync > > > (**) S3VIRGE(0): Default mode "360x200": 17.8 MHz, 37.9 kHz, > > > 85.0 Hz (D) > > > (II) S3VIRGE(0): Modeline "360x200" 17.75 360 378 414 468 > > > 200 200 202 223 doublescan -hsync +vsync > > > (**) S3VIRGE(0): Default mode "320x200": 15.8 MHz, 37.9 kHz, > > > 85.3 Hz (D) > > > (II) S3VIRGE(0): Modeline "320x200" 15.75 320 336 368 416 > > > 200 200 202 222 doublescan -hsync +vsync > > > (**) S3VIRGE(0): Default mode "320x175": 15.8 MHz, 37.9 kHz, > > > 85.3 Hz (D) > > > (II) S3VIRGE(0): Modeline "320x175" 15.75 320 336 368 416 > > > 175 191 192 222 doublescan +hsync -vsync > > > (**) S3VIRGE(0): Display dimensions: (280, 210) mm > > > (**) S3VIRGE(0): DPI set to (92, 92) > > > (II) Loading sub module "fb" > > > (II) LoadModule: "fb" > > > (II) Loading /usr/X11R6/lib/modules/libfb.a > > > (II) Module fb: vendor="The XFree86 Project" > > > compiled for 4.3.0, module version = 1.0.0 > > > ABI class: XFree86 ANSI C Emulation, version 0.2 > > > (II) Loading sub module "xaa" > > > (II) LoadModule: "xaa" > > > (II) Loading /usr/X11R6/lib/modules/libxaa.a > > > (II) Module xaa: vendor="The XFree86 Project" > > > compiled for 4.3.0, module version = 1.1.0 > > > ABI class: XFree86 Video Driver, version 0.6 > > > (II) Loading sub module "ramdac" > > > (II) LoadModule: "ramdac" > > > (II) Loading /usr/X11R6/lib/modules/libramdac.a > > > (II) Module ramdac: vendor="The XFree86 Project" > > > compiled for 4.3.0, module version = 0.1.0 > > > ABI class: XFree86 Video Driver, version 0.6 > > > (II) do I need RAC? No, I don't. > > > (II) resource ranges after preInit: > > > [0] 0 0 0xdc000000 - 0xdfffffff (0x4000000) MS[B] > > > [1] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) > > > [2] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) > > > [3] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] > > > [4] -1 0 0x000c0000 - 0x000cffff (0x10000) MX[B] > > > [5] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] > > > [6] -1 0 0xda800000 - 0xda8000ff (0x100) MX[B] > > > [7] -1 0 0xdb000000 - 0xdb0fffff (0x100000) MX[B] > > > [8] -1 0 0xdb800000 - 0xdb800fff (0x1000) MX[B] > > > [9] -1 0 0xe4000000 - 0xe3ffffff (0x0) MX[B]O > > > [10] -1 0 0x000c0000 - 0x000cffff (0x10000) MX[B](B) > > > [11] -1 0 0xdc000000 - 0xdfffffff (0x4000000) MX[B](B) > > > [12] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprD) > > > [13] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD) > > > [14] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprD) > > > [15] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] > > > [16] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] > > > [17] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[B] > > > [18] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[B] > > > [19] -1 0 0x0000d800 - 0x0000d80f (0x10) IX[B] > > > [20] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU) > > > [21] 0 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU) > > > (==) S3VIRGE(0): Write-combining range (0xdc000000,0x200000) > > > (II) S3VIRGE(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, > > > hwp->PIOOffset is 0x0000 > > > (II) S3VIRGE(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, > > > hwp->PIOOffset is 0x0000 > > > (**) S3VIRGE(0): Using FB > > > (II) S3VIRGE(0): Using XFree86 Acceleration Architecture (XAA) > > > Screen to screen bit blits > > > Solid filled rectangles > > > 8x8 mono pattern filled rectangles > > > CPU to Screen color expansion > > > Solid Horizontal and Vertical Lines > > > Image Writes > > > Offscreen Pixmaps > > > Setting up tile and stipple cache: > > > 32 128x128 slots > > > 10 256x256 slots > > > (==) S3VIRGE(0): Backing store disabled > > > (==) S3VIRGE(0): Silken mouse enabled > > > (**) Option "dpms" > > > (**) S3VIRGE(0): DPMS enabled > > > (==) RandR enabled > > > (II) Initializing built-in extension MIT-SHM > > > (II) Initializing built-in extension XInputExtension > > > (II) Initializing built-in extension XTEST > > > (II) Initializing built-in extension XKEYBOARD > > > (II) Initializing built-in extension LBX > > > (II) Initializing built-in extension XC-APPGROUP > > > (II) Initializing built-in extension SECURITY > > > (II) Initializing built-in extension XINERAMA > > > (II) Initializing built-in extension XFree86-Bigfont > > > (II) Initializing built-in extension RENDER > > > (II) Initializing built-in extension RANDR > > > (**) Option "Protocol" "IMPS/2" > > > (**) Mouse0: Protocol: "IMPS/2" > > > (**) Option "CorePointer" > > > (**) Mouse0: Core Pointer > > > (**) Option "Device" "/dev/psaux" > > > (**) Option "Emulate3Buttons" "yes" > > > (**) Mouse0: Emulate3Buttons, Emulate3Timeout: 50 > > > (**) Option "ZAxisMapping" "4 5" > > > (**) Mouse0: ZAxisMapping: buttons 4 and 5 > > > (**) Mouse0: Buttons: 5 > > > (II) Keyboard "Keyboard0" handled by legacy driver > > > (**) Option "Protocol" "IMPS/2" > > > (**) DevInputMice: Protocol: "IMPS/2" > > > (**) Option "AlwaysCore" > > > (**) DevInputMice: always reports core events > > > (**) Option "Device" "/dev/input/mice" > > > (**) Option "Emulate3Buttons" "no" > > > (**) Option "ZAxisMapping" "4 5" > > > (**) DevInputMice: ZAxisMapping: buttons 4 and 5 > > > (**) DevInputMice: Buttons: 5 > > > (II) XINPUT: Adding extended input device "DevInputMice" > (type: MOUSE) > > > (II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE) > > > (II) Mouse0: ps2EnableDataReporting: succeeded > > > (II) DevInputMice: ps2EnableDataReporting: succeeded > > > > > > ************************************************************** > > > *********** > > > > > > > > > > > > > > > _______________________________________________ > > > XFree86 mailing list > > > XFree86@xxxxxxxxxxx > > > http://XFree86.Org/mailman/listinfo/xfree86 > > > > > > > _______________________________________________ > > XFree86 mailing list > > XFree86@xxxxxxxxxxx > > http://XFree86.Org/mailman/listinfo/xfree86 > > > > > > > _______________________________________________ > XFree86 mailing list > XFree86@xxxxxxxxxxx > http://XFree86.Org/mailman/listinfo/xfree86 > _______________________________________________ XFree86 mailing list XFree86@xxxxxxxxxxx http://XFree86.Org/mailman/listinfo/xfree86
