Sir, I 've recently installed linux kernel 2.6.0 and all things X related seem to be functioning fine, except for switching terminals and shutting down...when i try to kill x, or switch a terminal(ctrl-alt-F1-6) or restarting, all i get is a blank screen. i know my keyboard is working cause ctrl-alt F7 switched back to the active X terminal. i had no problems with kernel 2.4.22 anyway here are the required log files: The log file XFree86 Version 4.3.0 Release Date: 27 February 2003 X Protocol Version 11, Revision 0, Release 6.6 Build Operating System: Linux 2.4.22 i686 [ELF] Build Date: 16 September 2003 Before reporting problems, check http://www.XFree86.Org/ to make sure that you have the latest version. Module Loader present Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/XFree86.0.log", Time: Sun Jan 11 15:57:22 2004 (==) Using config file: "/etc/X11/XF86Config" (==) ServerLayout "Simple Layout" (**) |-->Screen "Screen 1" (0) (**) | |-->Monitor "My Monitor" (**) | |-->Device "VESA Framebuffer" (**) |-->Input Device "Mouse1" (**) |-->Input Device "Keyboard1" (==) Keyboard: CustomKeycode disabled (**) FontPath set to "/usr/X11R6/lib/X11/fonts/local/,/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/75dpi/:unscaled,/usr/X11R6/lib/X11/fonts/100dpi/:unscaled,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/CID/,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/,/usr/X11R6/lib/X11/fonts/cyrillic/" (**) RgbPath set to "/usr/X11R6/lib/X11/rgb" (==) ModulePath set to "/usr/X11R6/lib/modules" (++) using VT number 7 (WW) Open APM failed (/dev/apm_bios) (No such device) (II) Module ABI versions: XFree86 ANSI C Emulation: 0.2 XFree86 Video Driver: 0.6 XFree86 XInput driver : 0.4 XFree86 Server Extension : 0.2 XFree86 Font Renderer : 0.4 (II) Loader running on linux (II) LoadModule: "bitmap" (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a (II) Module bitmap: vendor="The XFree86 Project" compiled for 4.3.0, module version = 1.0.0 Module class: XFree86 Font Renderer ABI class: XFree86 Font Renderer, version 0.4 (II) Loading font Bitmap (II) LoadModule: "pcidata" (II) Loading /usr/X11R6/lib/modules/libpcidata.a (II) Module pcidata: vendor="The XFree86 Project" compiled for 4.3.0, module version = 1.0.0 ABI class: XFree86 Video Driver, version 0.6 (II) PCI: Probing config type using method 1 (II) PCI: Config type is 1 (II) PCI: stages = 0x03, oldVal1 = 0x80010044, mode1Res1 = 0x80000000 (II) PCI: PCI scan (all values are in hex) (II) PCI: 00:00:0: chip 1106,3099 card 1043,8064 rev 00 class 06,00,00 hdr 00 (II) PCI: 00:01:0: chip 1106,b099 card 0000,0000 rev 00 class 06,04,00 hdr 01 (II) PCI: 00:05:0: chip 13f6,0111 card 1043,80e2 rev 10 class 04,01,00 hdr 00 (II) PCI: 00:0f:0: chip 3388,0021 card 0000,0000 rev 13 class 06,04,00 hdr 01 (II) PCI: 00:11:0: chip 1106,3147 card 1043,8052 rev 00 class 06,01,00 hdr 80 (II) PCI: 00:11:1: chip 1106,0571 card 1043,8052 rev 06 class 01,01,8a hdr 00 (II) PCI: 00:11:2: chip 1106,3038 card 0925,1234 rev 23 class 0c,03,00 hdr 00 (II) PCI: 00:11:3: chip 1106,3038 card 0925,1234 rev 23 class 0c,03,00 hdr 00 (II) PCI: 01:00:0: chip 10de,0250 card 1043,800b rev a3 class 03,00,00 hdr 00 (II) PCI: 02:08:0: chip 1033,0035 card 9004,0235 rev 41 class 0c,03,10 hdr 80 (II) PCI: 02:08:1: chip 1033,0035 card 9004,0235 rev 41 class 0c,03,10 hdr 00 (II) PCI: 02:08:2: chip 1033,00e0 card 9004,02e0 rev 02 class 0c,03,20 hdr 00 (II) PCI: 02:0b:0: chip 104c,8020 card 104c,8010 rev 00 class 0c,00,10 hdr 00 (II) PCI: End of PCI scan (II) Host-to-PCI bridge: (II) Bus 0: bridge is at (0:0:0), (0,0,2), BCTRL: 0x0008 (VGA_EN is set) (II) Bus 0 I/O range: [0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B] (II) Bus 0 non-prefetchable memory range: [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B] (II) Bus 0 prefetchable memory range: [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B] (II) PCI-to-PCI bridge: (II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x0008 (VGA_EN is set) (II) Bus 1 non-prefetchable memory range: [0] -1 0 0xe6000000 - 0xe76fffff (0x1700000) MX[B] (II) Bus 1 prefetchable memory range: [0] -1 0 0xe7700000 - 0xefffffff (0x8900000) MX[B] (II) PCI-to-PCI bridge: (II) Bus 2: bridge is at (0:15:0), (0,2,2), BCTRL: 0x0004 (VGA_EN is cleared) (II) Bus 2 non-prefetchable memory range: [0] -1 0 0xe3800000 - 0xe5ffffff (0x2800000) MX[B] (II) PCI-to-ISA bridge: (II) Bus -1: bridge is at (0:17:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set) (--) PCI:*(1:0:0) nVidia Corporation NV25 [GeForce4 Ti 4600] rev 163, Mem @ 0xe6000000/24, 0xe8000000/27, 0xe7800000/19, BIOS @ 0xe77e0000/17 (II) Addressable bus resource ranges are [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B] [1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B] (II) OS-reported resource ranges: [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] (II) PCI Memory resource overlap reduced 0xf0000000 from 0xf7ffffff to 0xefffffff (II) Active PCI resource ranges: [0] -1 0 0xe3800000 - 0xe3803fff (0x4000) MX[B] [1] -1 0 0xe4000000 - 0xe40007ff (0x800) MX[B] [2] -1 0 0xe4800000 - 0xe48000ff (0x100) MX[B] [3] -1 0 0xe5000000 - 0xe5000fff (0x1000) MX[B] [4] -1 0 0xe5800000 - 0xe5800fff (0x1000) MX[B] [5] -1 0 0xf0000000 - 0xefffffff (0x0) MX[B]O [6] -1 0 0xe77e0000 - 0xe77fffff (0x20000) MX[B](B) [7] -1 0 0xe7800000 - 0xe787ffff (0x80000) MX[B](B) [8] -1 0 0xe8000000 - 0xefffffff (0x8000000) MX[B](B) [9] -1 0 0xe6000000 - 0xe6ffffff (0x1000000) MX[B](B) [10] -1 0 0x0000b000 - 0x0000b01f (0x20) IX[B] [11] -1 0 0x0000b400 - 0x0000b41f (0x20) IX[B] [12] -1 0 0x0000b800 - 0x0000b80f (0x10) IX[B] [13] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[B] (II) Active PCI resource ranges after removing overlaps: [0] -1 0 0xe3800000 - 0xe3803fff (0x4000) MX[B] [1] -1 0 0xe4000000 - 0xe40007ff (0x800) MX[B] [2] -1 0 0xe4800000 - 0xe48000ff (0x100) MX[B] [3] -1 0 0xe5000000 - 0xe5000fff (0x1000) MX[B] [4] -1 0 0xe5800000 - 0xe5800fff (0x1000) MX[B] [5] -1 0 0xf0000000 - 0xefffffff (0x0) MX[B]O [6] -1 0 0xe77e0000 - 0xe77fffff (0x20000) MX[B](B) [7] -1 0 0xe7800000 - 0xe787ffff (0x80000) MX[B](B) [8] -1 0 0xe8000000 - 0xefffffff (0x8000000) MX[B](B) [9] -1 0 0xe6000000 - 0xe6ffffff (0x1000000) MX[B](B) [10] -1 0 0x0000b000 - 0x0000b01f (0x20) IX[B] [11] -1 0 0x0000b400 - 0x0000b41f (0x20) IX[B] [12] -1 0 0x0000b800 - 0x0000b80f (0x10) IX[B] [13] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[B] (II) OS-reported resource ranges after removing overlaps with PCI: [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] (II) All system resource ranges: [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [5] -1 0 0xe3800000 - 0xe3803fff (0x4000) MX[B] [6] -1 0 0xe4000000 - 0xe40007ff (0x800) MX[B] [7] -1 0 0xe4800000 - 0xe48000ff (0x100) MX[B] [8] -1 0 0xe5000000 - 0xe5000fff (0x1000) MX[B] [9] -1 0 0xe5800000 - 0xe5800fff (0x1000) MX[B] [10] -1 0 0xf0000000 - 0xefffffff (0x0) MX[B]O [11] -1 0 0xe77e0000 - 0xe77fffff (0x20000) MX[B](B) [12] -1 0 0xe7800000 - 0xe787ffff (0x80000) MX[B](B) [13] -1 0 0xe8000000 - 0xefffffff (0x8000000) MX[B](B) [14] -1 0 0xe6000000 - 0xe6ffffff (0x1000000) MX[B](B) [15] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [16] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [17] -1 0 0x0000b000 - 0x0000b01f (0x20) IX[B] [18] -1 0 0x0000b400 - 0x0000b41f (0x20) IX[B] [19] -1 0 0x0000b800 - 0x0000b80f (0x10) IX[B] [20] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[B] (II) LoadModule: "dbe" (II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a (II) Module dbe: vendor="The XFree86 Project" compiled for 4.3.0, module version = 1.0.0 Module class: XFree86 Server Extension ABI class: XFree86 Server Extension, version 0.2 (II) Loading extension DOUBLE-BUFFER (II) LoadModule: "extmod" (II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a (II) Module extmod: vendor="The XFree86 Project" compiled for 4.3.0, module version = 1.0.0 Module class: XFree86 Server Extension ABI class: XFree86 Server Extension, version 0.2 (II) Loading extension SHAPE (II) Loading extension MIT-SUNDRY-NONSTANDARD (II) Loading extension BIG-REQUESTS (II) Loading extension SYNC (II) Loading extension MIT-SCREEN-SAVER (II) Loading extension XC-MISC (II) Loading extension XFree86-VidModeExtension (II) Loading extension XFree86-Misc (II) Loading extension DPMS (II) Loading extension FontCache (II) Loading extension TOG-CUP (II) Loading extension Extended-Visual-Information (II) Loading extension XVideo (II) Loading extension XVideo-MotionCompensation (II) Loading extension X-Resource (II) LoadModule: "type1" (II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a (II) Module type1: vendor="The XFree86 Project" compiled for 4.3.0, module version = 1.0.2 Module class: XFree86 Font Renderer ABI class: XFree86 Font Renderer, version 0.4 (II) Loading font Type1 (II) Loading font CID (II) LoadModule: "freetype" (II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.a (II) Module freetype: vendor="The XFree86 Project" compiled for 4.3.0, module version = 2.0.2 Module class: XFree86 Font Renderer ABI class: XFree86 Font Renderer, version 0.4 (II) Loading font FreeType (II) LoadModule: "speedo" (II) Loading /usr/X11R6/lib/modules/fonts/libspeedo.a (II) Module speedo: vendor="The XFree86 Project" compiled for 4.3.0, module version = 1.0.1 Module class: XFree86 Font Renderer ABI class: XFree86 Font Renderer, version 0.4 (II) Loading font Speedo (II) LoadModule: "glx" (II) Loading /usr/X11R6/lib/modules/extensions/libglx.a (II) Module glx: vendor="The XFree86 Project" compiled for 4.3.0, module version = 1.0.0 ABI class: XFree86 Server Extension, version 0.2 (II) Loading sub module "GLcore" (II) LoadModule: "GLcore" (II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a (II) Module GLcore: vendor="The XFree86 Project" compiled for 4.3.0, module version = 1.0.0 ABI class: XFree86 Server Extension, version 0.2 (II) Loading extension GLX (II) LoadModule: "nvidia" (II) Loading /usr/X11R6/lib/modules/drivers/nvidia_drv.o (II) Module nvidia: vendor="NVIDIA Corporation" compiled for 4.0.2, module version = 1.0.5328 Module class: XFree86 Video Driver (II) LoadModule: "mouse" (II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o (II) Module mouse: vendor="The XFree86 Project" compiled for 4.3.0, module version = 1.0.0 Module class: XFree86 XInput Driver ABI class: XFree86 XInput driver, version 0.4 (II) NVIDIA XFree86 Driver 1.0-5328 Wed Dec 17 13:56:09 PST 2003 (II) NVIDIA Unified Driver for all NVIDIA GPUs (II) Primary Device is: PCI 01:00:0 (--) Assigning device section with no busID to primary device (--) Chipset NVIDIA GPU found (II) resource ranges after xf86ClaimFixedResources() call: [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [5] -1 0 0xe3800000 - 0xe3803fff (0x4000) MX[B] [6] -1 0 0xe4000000 - 0xe40007ff (0x800) MX[B] [7] -1 0 0xe4800000 - 0xe48000ff (0x100) MX[B] [8] -1 0 0xe5000000 - 0xe5000fff (0x1000) MX[B] [9] -1 0 0xe5800000 - 0xe5800fff (0x1000) MX[B] [10] -1 0 0xf0000000 - 0xefffffff (0x0) MX[B]O [11] -1 0 0xe77e0000 - 0xe77fffff (0x20000) MX[B](B) [12] -1 0 0xe7800000 - 0xe787ffff (0x80000) MX[B](B) [13] -1 0 0xe8000000 - 0xefffffff (0x8000000) MX[B](B) [14] -1 0 0xe6000000 - 0xe6ffffff (0x1000000) MX[B](B) [15] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [16] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [17] -1 0 0x0000b000 - 0x0000b01f (0x20) IX[B] [18] -1 0 0x0000b400 - 0x0000b41f (0x20) IX[B] [19] -1 0 0x0000b800 - 0x0000b80f (0x10) IX[B] [20] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[B] (II) resource ranges after probing: [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [5] -1 0 0xe3800000 - 0xe3803fff (0x4000) MX[B] [6] -1 0 0xe4000000 - 0xe40007ff (0x800) MX[B] [7] -1 0 0xe4800000 - 0xe48000ff (0x100) MX[B] [8] -1 0 0xe5000000 - 0xe5000fff (0x1000) MX[B] [9] -1 0 0xe5800000 - 0xe5800fff (0x1000) MX[B] [10] -1 0 0xf0000000 - 0xefffffff (0x0) MX[B]O [11] -1 0 0xe77e0000 - 0xe77fffff (0x20000) MX[B](B) [12] -1 0 0xe7800000 - 0xe787ffff (0x80000) MX[B](B) [13] -1 0 0xe8000000 - 0xefffffff (0x8000000) MX[B](B) [14] -1 0 0xe6000000 - 0xe6ffffff (0x1000000) MX[B](B) [15] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B] [16] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B] [17] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B] [18] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [19] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [20] -1 0 0x0000b000 - 0x0000b01f (0x20) IX[B] [21] -1 0 0x0000b400 - 0x0000b41f (0x20) IX[B] [22] -1 0 0x0000b800 - 0x0000b80f (0x10) IX[B] [23] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[B] [24] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B] [25] 0 0 0x000003c0 - 0x000003df (0x20) IS[B] (II) Setting vga for screen 0. (II) Loading sub module "vgahw" (II) LoadModule: "vgahw" (II) Loading /usr/X11R6/lib/modules/libvgahw.a (II) Module vgahw: vendor="The XFree86 Project" compiled for 4.3.0, module version = 0.1.0 ABI class: XFree86 Video Driver, version 0.6 (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32 (==) NVIDIA(0): RGB weight 888 (==) NVIDIA(0): Default visual is TrueColor (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0) (--) NVIDIA(0): Linear framebuffer at 0xE8000000 (--) NVIDIA(0): MMIO registers at 0xE6000000 (II) NVIDIA(0): NVIDIA GPU detected as: GeForce4 Ti 4600 (--) NVIDIA(0): VideoBIOS: 04.25.00.19.00 (--) NVIDIA(0): VideoRAM: 131072 kBytes (II) NVIDIA(0): Connected display device(s): CRT-1 (--) NVIDIA(0): Detected TV Encoder: Brooktree 871 (--) NVIDIA(0): Display device CRT-1: maximum pixel clock at 8 bpp: 350 MHz (--) NVIDIA(0): Display device CRT-1: maximum pixel clock at 16 bpp: 350 MHz (--) NVIDIA(0): Display device CRT-1: maximum pixel clock at 32 bpp: 350 MHz (II) Loading sub module "ddc" (II) LoadModule: "ddc" (II) Loading /usr/X11R6/lib/modules/libddc.a (II) Module ddc: vendor="The XFree86 Project" compiled for 4.3.0, module version = 1.0.0 ABI class: XFree86 Video Driver, version 0.6 (II) NVIDIA(0): My Monitor: Using hsync range of 30.00-130.00 kHz (II) NVIDIA(0): My Monitor: Using vrefresh range of 48.00-170.00 Hz (II) NVIDIA(0): Clock range: 12.00 to 350.00 MHz (II) NVIDIA(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan) (II) NVIDIA(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan) (II) NVIDIA(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan) (II) NVIDIA(0): Not using default mode "1024x768" (hsync out of range) (II) NVIDIA(0): Not using default mode "2048x1536" (width too large for virtual size) (II) NVIDIA(0): Not using default mode "2048x1536" (width too large for virtual size) (II) NVIDIA(0): Not using default mode "1920x1440" (width too large for virtual size) (II) NVIDIA(0): Not using default mode "1920x1440" (width too large for virtual size) (II) NVIDIA(0): Not using default mode "1920x1440" (width too large for virtual size) (II) NVIDIA(0): Not using mode "1800x1440/70Hz" (width too large for virtual size) (II) NVIDIA(0): Not using default mode "1856x1392" (width too large for virtual size) (II) NVIDIA(0): Not using default mode "1856x1392" (width too large for virtual size) (II) NVIDIA(0): Not using default mode "1792x1344" (width too large for virtual size) (II) NVIDIA(0): Not using default mode "1792x1344" (width too large for virtual size) (II) NVIDIA(0): Not using mode "1600x1200/85Hz" (width too large for virtual size) (II) NVIDIA(0): Not using default mode "1600x1200" (width too large for virtual size) (II) NVIDIA(0): Not using default mode "1600x1200" (width too large for virtual size) (II) NVIDIA(0): Not using default mode "1600x1200" (width too large for virtual size) (II) NVIDIA(0): Not using default mode "1600x1200" (width too large for virtual size) (II) NVIDIA(0): Not using default mode "1600x1200" (width too large for virtual size) (II) NVIDIA(0): Not using default mode "1400x1050" (width too large for virtual size) (II) NVIDIA(0): Not using default mode "1400x1050" (width too large for virtual size) (WW) NVIDIA(0): Not using mode "1152x768": (WW) NVIDIA(0): horizontal sync start (1178) not a multiple of 8 (WW) NVIDIA(0): Not using mode "576x384": (WW) NVIDIA(0): horizontal sync start (589) not a multiple of 8 (WW) NVIDIA(0): Not using mode "360x200": (WW) NVIDIA(0): horizontal sync start (378) not a multiple of 8 (**) NVIDIA(0): Validated modes for display device CRT-1: (**) NVIDIA(0): Mode "1280x1024/100Hz": 181.8 MHz, 107.2 kHz, 100.0 Hz (**) NVIDIA(0): Default mode "800x600": 56.3 MHz, 53.7 kHz, 85.1 Hz (**) NVIDIA(0): Default mode "640x480": 74.2 MHz, 85.9 kHz, 85.1 Hz (D) (**) NVIDIA(0): Mode "1280x1024/85Hz": 157.5 MHz, 91.1 kHz, 85.0 Hz (**) NVIDIA(0): Default mode "1280x1024": 157.5 MHz, 91.1 kHz, 85.0 Hz (**) NVIDIA(0): Default mode "1280x1024": 135.0 MHz, 80.0 kHz, 75.0 Hz (**) NVIDIA(0): Default mode "1280x1024": 108.0 MHz, 64.0 kHz, 60.0 Hz (**) NVIDIA(0): Default mode "1280x960": 148.5 MHz, 85.9 kHz, 85.0 Hz (**) NVIDIA(0): Default mode "1280x960": 108.0 MHz, 60.0 kHz, 60.0 Hz (**) NVIDIA(0): Default mode "1152x864": 108.0 MHz, 67.5 kHz, 75.0 Hz (**) NVIDIA(0): Default mode "1024x768": 94.5 MHz, 68.7 kHz, 85.0 Hz (**) NVIDIA(0): Default mode "1024x768": 78.8 MHz, 60.1 kHz, 75.1 Hz (**) NVIDIA(0): Default mode "1024x768": 170.2 MHz, 120.2 kHz, 75.0 Hz (**) NVIDIA(0): (D) (**) NVIDIA(0): Default mode "1024x768": 75.0 MHz, 56.5 kHz, 70.1 Hz (**) NVIDIA(0): Default mode "1024x768": 133.5 MHz, 95.3 kHz, 60.0 Hz (D) (**) NVIDIA(0): Default mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz (**) NVIDIA(0): Default mode "960x720": 170.7 MHz, 128.5 kHz, 85.0 Hz (D) (**) NVIDIA(0): Default mode "960x720": 148.5 MHz, 112.5 kHz, 75.0 Hz (D) (**) NVIDIA(0): Default mode "960x720": 117.0 MHz, 90.0 kHz, 60.0 Hz (D) (**) NVIDIA(0): Default mode "928x696": 144.0 MHz, 112.5 kHz, 75.0 Hz (D) (**) NVIDIA(0): Default mode "928x696": 109.2 MHz, 86.4 kHz, 60.1 Hz (D) (**) NVIDIA(0): Default mode "896x672": 130.5 MHz, 106.3 kHz, 75.0 Hz (D) (**) NVIDIA(0): Default mode "896x672": 102.4 MHz, 83.7 kHz, 60.0 Hz (D) (**) NVIDIA(0): Default mode "832x624": 57.3 MHz, 49.7 kHz, 74.6 Hz (**) NVIDIA(0): Default mode "800x600": 114.8 MHz, 106.2 kHz, 85.0 Hz (D) (**) NVIDIA(0): Default mode "800x600": 49.5 MHz, 46.9 kHz, 75.0 Hz (**) NVIDIA(0): Default mode "800x600": 101.2 MHz, 93.8 kHz, 75.0 Hz (D) (**) NVIDIA(0): Default mode "800x600": 50.0 MHz, 48.1 kHz, 72.2 Hz (**) NVIDIA(0): Default mode "800x600": 94.5 MHz, 87.5 kHz, 70.0 Hz (D) (**) NVIDIA(0): Default mode "800x600": 87.8 MHz, 81.2 kHz, 65.0 Hz (D) (**) NVIDIA(0): Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz (**) NVIDIA(0): Default mode "800x600": 81.0 MHz, 75.0 kHz, 60.0 Hz (D) (**) NVIDIA(0): Default mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz (**) NVIDIA(0): Default mode "700x525": 77.9 MHz, 81.5 kHz, 74.8 Hz (D) (**) NVIDIA(0): Default mode "700x525": 61.0 MHz, 64.9 kHz, 60.0 Hz (D) (**) NVIDIA(0): Default mode "640x512": 78.8 MHz, 91.1 kHz, 85.0 Hz (D) (**) NVIDIA(0): Default mode "640x512": 67.5 MHz, 80.0 kHz, 75.0 Hz (D) (**) NVIDIA(0): Default mode "640x512": 54.0 MHz, 64.0 kHz, 60.0 Hz (D) (**) NVIDIA(0): Default mode "640x480": 36.0 MHz, 43.3 kHz, 85.0 Hz (**) NVIDIA(0): Default mode "640x480": 31.5 MHz, 37.5 kHz, 75.0 Hz (**) NVIDIA(0): Default mode "640x480": 31.5 MHz, 37.9 kHz, 72.8 Hz (**) NVIDIA(0): Default mode "640x480": 25.2 MHz, 31.5 kHz, 60.0 Hz (**) NVIDIA(0): Default mode "640x480": 54.0 MHz, 60.0 kHz, 60.0 Hz (D) (**) NVIDIA(0): Default mode "720x400": 35.5 MHz, 37.9 kHz, 85.0 Hz (**) NVIDIA(0): Default mode "640x400": 31.5 MHz, 37.9 kHz, 85.1 Hz (**) NVIDIA(0): Default mode "576x432": 54.0 MHz, 67.5 kHz, 75.0 Hz (D) (**) NVIDIA(0): Default mode "640x350": 31.5 MHz, 37.9 kHz, 85.1 Hz (**) NVIDIA(0): Default mode "512x384": 47.2 MHz, 68.7 kHz, 85.0 Hz (D) (**) NVIDIA(0): Default mode "512x384": 39.4 MHz, 60.1 kHz, 75.1 Hz (D) (**) NVIDIA(0): Default mode "512x384": 37.5 MHz, 56.5 kHz, 70.1 Hz (D) (**) NVIDIA(0): Default mode "512x384": 32.5 MHz, 48.4 kHz, 60.0 Hz (D) (**) NVIDIA(0): Default mode "416x312": 28.6 MHz, 49.7 kHz, 74.7 Hz (D) (**) NVIDIA(0): Default mode "400x300": 28.1 MHz, 53.7 kHz, 85.3 Hz (D) (**) NVIDIA(0): Default mode "400x300": 24.8 MHz, 46.9 kHz, 75.1 Hz (D) (**) NVIDIA(0): Default mode "400x300": 25.0 MHz, 48.1 kHz, 72.2 Hz (D) (**) NVIDIA(0): Default mode "400x300": 20.0 MHz, 37.9 kHz, 60.3 Hz (D) (**) NVIDIA(0): Default mode "400x300": 18.0 MHz, 35.2 kHz, 56.3 Hz (D) (**) NVIDIA(0): Default mode "320x240": 18.0 MHz, 43.3 kHz, 85.2 Hz (D) (**) NVIDIA(0): Default mode "320x240": 15.8 MHz, 37.5 kHz, 75.0 Hz (D) (**) NVIDIA(0): Default mode "320x240": 15.8 MHz, 37.9 kHz, 72.8 Hz (D) (**) NVIDIA(0): Default mode "320x240": 12.6 MHz, 31.5 kHz, 60.1 Hz (D) (**) NVIDIA(0): Default mode "320x200": 15.8 MHz, 37.9 kHz, 85.3 Hz (D) (**) NVIDIA(0): Default mode "320x175": 15.8 MHz, 37.9 kHz, 85.3 Hz (D) (II) NVIDIA(0): Virtual screen size determined to be 1280 x 1024 (--) NVIDIA(0): Display dimensions: (400, 300) mm (--) NVIDIA(0): DPI set to (81, 86) (II) Loading sub module "fb" (II) LoadModule: "fb" (II) Loading /usr/X11R6/lib/modules/libfb.a (II) Module fb: vendor="The XFree86 Project" compiled for 4.3.0, module version = 1.0.0 ABI class: XFree86 ANSI C Emulation, version 0.2 (II) Loading sub module "ramdac" (II) LoadModule: "ramdac" (II) Loading /usr/X11R6/lib/modules/libramdac.a (II) Module ramdac: vendor="The XFree86 Project" compiled for 4.3.0, module version = 0.1.0 ABI class: XFree86 Video Driver, version 0.6 (--) Depth 24 pixmap format is 32 bpp (II) do I need RAC? No, I don't. (II) resource ranges after preInit: [0] 0 0 0xe7800000 - 0xe787ffff (0x80000) MX[B] [1] 0 0 0xe8000000 - 0xefffffff (0x8000000) MX[B] [2] 0 0 0xe6000000 - 0xe6ffffff (0x1000000) MX[B] [3] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [4] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [5] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [6] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [7] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [8] -1 0 0xe3800000 - 0xe3803fff (0x4000) MX[B] [9] -1 0 0xe4000000 - 0xe40007ff (0x800) MX[B] [10] -1 0 0xe4800000 - 0xe48000ff (0x100) MX[B] [11] -1 0 0xe5000000 - 0xe5000fff (0x1000) MX[B] [12] -1 0 0xe5800000 - 0xe5800fff (0x1000) MX[B] [13] -1 0 0xf0000000 - 0xefffffff (0x0) MX[B]O [14] -1 0 0xe77e0000 - 0xe77fffff (0x20000) MX[B](B) [15] -1 0 0xe7800000 - 0xe787ffff (0x80000) MX[B](B) [16] -1 0 0xe8000000 - 0xefffffff (0x8000000) MX[B](B) [17] -1 0 0xe6000000 - 0xe6ffffff (0x1000000) MX[B](B) [18] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprD) [19] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD) [20] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprD) [21] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [22] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [23] -1 0 0x0000b000 - 0x0000b01f (0x20) IX[B] [24] -1 0 0x0000b400 - 0x0000b41f (0x20) IX[B] [25] -1 0 0x0000b800 - 0x0000b80f (0x10) IX[B] [26] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[B] [27] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU) [28] 0 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU) (II) NVIDIA(0): AGP 4X successfully initialized (II) NVIDIA(0): Setting mode "1280x1024/100Hz" (II) Loading extension NV-GLX (II) NVIDIA(0): NVIDIA 3D Acceleration Architecture Initialized (II) NVIDIA(0): Using the NVIDIA 2D acceleration architecture (==) NVIDIA(0): Backing store disabled (==) NVIDIA(0): Silken mouse enabled (II) Loading extension NV-CONTROL (EE) NVIDIA(0): Failed to load GLX (==) RandR enabled (II) Initializing built-in extension MIT-SHM (II) Initializing built-in extension XInputExtension (II) Initializing built-in extension XTEST (II) Initializing built-in extension XKEYBOARD (II) Initializing built-in extension LBX (II) Initializing built-in extension XC-APPGROUP (II) Initializing built-in extension SECURITY (II) Initializing built-in extension XINERAMA (II) Initializing built-in extension XFree86-Bigfont (II) Initializing built-in extension RENDER (II) Initializing built-in extension RANDR (**) Option "Protocol" "ExplorerPS/2" (**) Mouse1: Protocol: "ExplorerPS/2" (**) Option "CorePointer" (**) Mouse1: Core Pointer (**) Option "Device" "/dev/mouse" (**) Option "Buttons" "7" (**) Option "Emulate3Buttons" "no" (**) Option "ZAxisMapping" "6 7" (**) Mouse1: ZAxisMapping: buttons 6 and 7 (**) Mouse1: Buttons: 7 (**) Option "SampleRate" "1000" (**) Mouse1: SampleRate: 1000 (**) Option "Resolution" "600" (**) Mouse1: Resolution: 600 (II) Keyboard "Keyboard1" handled by legacy driver (II) XINPUT: Adding extended input device "Mouse1" (type: MOUSE) (II) XINPUT: Adding extended input device "NVIDIA Event Handler" (type: Other) (II) Mouse1: ps2EnableDataReporting: succeeded (WW) Open APM failed (/dev/apm_bios) (No such device) (II) NVIDIA(0): Setting mode "1280x1024/100Hz" (II) Mouse1: ps2EnableDataReporting: succeeded (WW) Open APM failed (/dev/apm_bios) (No such device) (II) NVIDIA(0): Setting mode "1280x1024/100Hz" (II) Mouse1: ps2EnableDataReporting: succeeded the XF86Config file:(only the relevant stuff) # ********************************************************************** # Module section -- this section is used to specify # which dynamically loadable modules to load. # ********************************************************************** # Section "Module" # This loads the DBE extension module. Load "dbe" # Double buffer extension # This loads the miscellaneous extensions module, and disables # initialisation of the XFree86-DGA extension within that module. SubSection "extmod" Option "omit xfree86-dga" # don't initialise the DGA extension EndSubSection # This loads the font modules Load "type1" Load "freetype" Load "speedo" # This loads the GLX module Load "glx" EndSection # ********************************************************************** # Files section. This allows default font and rgb paths to be set # ********************************************************************** Section "Files" # The location of the RGB database. Note, this is the name of the # file minus the extension (like ".txt" or ".db"). There is normally # no need to change the default. RgbPath "/usr/X11R6/lib/X11/rgb" # Multiple FontPath entries are allowed (which are concatenated together), # as well as specifying multiple comma-separated entries in one FontPath # command (or a combination of both methods) # # If you don't have a floating point coprocessor and emacs, Mosaic or other # programs take long to start up, try moving the Type1 and Speedo directory # to the end of this list (or comment them out). # FontPath "/usr/X11R6/lib/X11/fonts/local/" FontPath "/usr/X11R6/lib/X11/fonts/misc/" FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/Type1/" FontPath "/usr/X11R6/lib/X11/fonts/CID/" FontPath "/usr/X11R6/lib/X11/fonts/Speedo/" FontPath "/usr/X11R6/lib/X11/fonts/75dpi/" FontPath "/usr/X11R6/lib/X11/fonts/100dpi/" FontPath "/usr/X11R6/lib/X11/fonts/cyrillic/" # ModulePath can be used to set a search path for the X server modules. # The default path is shown here. # ModulePath "/usr/X11R6/lib/modules" EndSection # ********************************************************************** # Server flags section. # ********************************************************************** Section "ServerFlags" # Uncomment this to cause a core dump at the spot where a signal is # received. This may leave the console in an unusable state, but may # provide a better stack trace in the core dump to aid in debugging # Option "NoTrapSignals" # Uncomment this to disable the <Crtl><Alt><Fn> VT switch sequence # (where n is 1 through 12). This allows clients to receive these key # events. # Option "DontVTSwitch" # Uncomment this to disable the <Crtl><Alt><BS> server abort sequence # This allows clients to receive this key event. # Option "DontZap" # Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching # sequences. This allows clients to receive these key events. # Option "DontZoom" # Uncomment this to disable tuning with the xvidtune client. With # it the client can still run and fetch card and monitor attributes, # but it will not be allowed to change them. If it tries it will # receive a protocol error. # Option "DisableVidModeExtension" # Uncomment this to enable the use of a non-local xvidtune client. # Option "AllowNonLocalXvidtune" # Uncomment this to disable dynamically modifying the input device # (mouse and keyboard) settings. # Option "DisableModInDev" # Uncomment this to enable the use of a non-local client to # change the keyboard or mouse settings (currently only xset). # Option "AllowNonLocalModInDev" # Set the basic blanking screen saver timeout. # Option "blank time" "10" # 10 minutes # Set the DPMS timeouts. These are set here because they are global # rather than screen-specific. These settings alone don't enable DPMS. # It is enabled per-screen (or per-monitor), and even then only when # the driver supports it. # Option "standby time" "20" # Option "suspend time" "30" # Option "off time" "60" # On some platform the server needs to estimate the sizes of PCI # memory and pio ranges. This is done by assuming that PCI ranges # don't overlap. Some broken BIOSes tend to set ranges of inactive # devices wrong. Here one can adjust how aggressive the assumptions # should be. Default is 0. # Option "EstimateSizesAggresively" "0" EndSection # ********************************************************************** # Input devices # ********************************************************************** # ********************************************************************** # Core keyboard's InputDevice section # ********************************************************************** Section "InputDevice" Identifier "Keyboard1" Driver "Keyboard" # For most OSs the protocol can be omitted (it defaults to "Standard"). # When using XQUEUE (only for SVR3 and SVR4, but not Solaris), # uncomment the following line. # Option "Protocol" "Xqueue" # Set the keyboard auto repeat parameters. Not all platforms implement # this. # Option "AutoRepeat" "500 5" # Specifiy which keyboard LEDs can be user-controlled (eg, with xset(1)). # Option "Xleds" "1 2 3" # To disable the XKEYBOARD extension, uncomment XkbDisable. # Option "XkbDisable" # To customise the XKB settings to suit your keyboard, modify the # lines below (which are the defaults). For example, for a European # keyboard, you will probably want to use one of: # # Option "XkbModel" "pc102" # Option "XkbModel" "pc105" # # If you have a Microsoft Natural keyboard, you can use: # # Option "XkbModel" "microsoft" # # If you have a US "windows" keyboard you will want: # # Option "XkbModel" "pc104" # # Then to change the language, change the Layout setting. # For example, a german layout can be obtained with: # # Option "XkbLayout" "de" # # or: # # Option "XkbLayout" "de" # Option "XkbVariant" "nodeadkeys" # # If you'd like to switch the positions of your capslock and # control keys, use: # # Option "XkbOptions" "ctrl:swapcaps" # These are the default XKB settings for XFree86 # # Option "XkbRules" "xfree86" # Option "XkbModel" "pc101" # Option "XkbLayout" "us" # Option "XkbVariant" "" # Option "XkbOptions" "" EndSection # ********************************************************************** # Core Pointer's InputDevice section # ********************************************************************** Section "InputDevice" # Identifier and driver Identifier "Mouse1" Driver "mouse" Option "Protocol" "ExplorerPS/2" Option "Device" "/dev/mouse" Option "Buttons" "7" Option "ZAxisMapping" "6 7" Option "Emulate3Buttons" "no" Option "Resolution" "600" Option "Samplerate" "1000" # On platforms where PnP mouse detection is supported the following # protocol setting can be used when using a newer PnP mouse: # Option "Protocol" "Auto" # The available mouse protocols types that you can set below are: # Auto BusMouse GlidePoint GlidePointPS/2 IntelliMouse IMPS/2 # Logitech Microsoft MMHitTab MMSeries Mouseman MouseManPlusPS/2 # MouseSystems NetMousePS/2 NetScrollPS/2 OSMouse PS/2 SysMouse # ThinkingMouse ThinkingMousePS/2 Xqueue # The mouse device. The device is normally set to /dev/mouse, # which is usually a symbolic link to the real device. # Option "Device" "/dev/psaux" # Option "Device" "/dev/ttyS0" # Option "Device" "/dev/ttyS1" # When using XQUEUE, comment out the above two lines, and uncomment # the following line. # Option "Protocol" "Xqueue" # Baudrate and SampleRate are only for some Logitech mice. In # almost every case these lines should be omitted. # Option "BaudRate" "9600" # Option "SampleRate" "150" # Emulate3Buttons is an option for 2-button Microsoft mice # Emulate3Timeout is the timeout in milliseconds (default is 50ms) # Option "Emulate3Buttons" # Option "Emulate3Timeout" "50" # ChordMiddle is an option for some 3-button Logitech mice # Option "ChordMiddle" EndSection # Some examples of extended input devices # Section "InputDevice" # Identifier "spaceball" # Driver "magellan" # Option "Device" "/dev/cua0" # EndSection # # Section "InputDevice" # Identifier "spaceball2" # Driver "spaceorb" # Option "Device" "/dev/cua0" # EndSection # # Section "InputDevice" # Identifier "touchscreen0" # Driver "microtouch" # Option "Device" "/dev/ttyS0" # Option "MinX" "1412" # Option "MaxX" "15184" # Option "MinY" "15372" # Option "MaxY" "1230" # Option "ScreenNumber" "0" # Option "ReportingMode" "Scaled" # Option "ButtonNumber" "1" # Option "SendCoreEvents" # EndSection # # Section "InputDevice" # Identifier "touchscreen1" # Driver "elo2300" # Option "Device" "/dev/ttyS0" # Option "MinX" "231" # Option "MaxX" "3868" # Option "MinY" "3858" # Option "MaxY" "272" # Option "ScreenNumber" "0" # Option "ReportingMode" "Scaled" # Option "ButtonThreshold" "17" # Option "ButtonNumber" "1" # Option "SendCoreEvents" # EndSection # ********************************************************************** # Monitor section # ********************************************************************** # Any number of monitor sections may be present Section "Monitor" Identifier "My Monitor" # HorizSync is in kHz unless units are specified. # HorizSync may be a comma separated list of discrete values, or a # comma separated list of ranges of values. # NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S # USER MANUAL FOR THE CORRECT NUMBERS. HorizSync 30-130 # HorizSync 30-64 # multisync # HorizSync 31.5, 35.2 # multiple fixed sync frequencies # HorizSync 15-25, 30-50 # multiple ranges of sync frequencies # VertRefresh is in Hz unless units are specified. # VertRefresh may be a comma separated list of discrete values, or a # comma separated list of ranges of values. # NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S # USER MANUAL FOR THE CORRECT NUMBERS. VertRefresh 48-170 vendorname "Sony" modelname "CPD G520" ModeLine "1280x1024/85Hz" 157.5 1280 1344 1504 1728 1024 1025 1028 1072 +HSync +VSync ModeLine "1280x1024/100Hz" 181.75 1280 1312 1440 1696 1024 1031 1046 1072 -HSync -VSync ModeLine "1800x1440/70Hz" 250 1800 1896 2088 2392 1440 1441 1444 1490 +HSync +VSync ModeLine "1600x1200/85Hz" 220 1600 1616 1808 2080 1200 1204 1207 1244 +HSync +VSync EndSection # ********************************************************************** # Graphics device section # ********************************************************************** # Any number of graphics device sections may be present Section "Device" Identifier "VESA Framebuffer" Driver "nvidia" #VideoRam 4096 # Insert Clocks lines here if appropriate vendorname "Generic" boardname "nv" EndSection # ********************************************************************** # Screen sections # ********************************************************************** # Any number of screen sections may be present. Each describes # the configuration of a single screen. A single specific screen section # may be specified from the X server command line with the "-screen" # option. Section "Screen" Identifier "Screen 1" Device "VESA Framebuffer" Monitor "My Monitor" # If your card can handle it, a higher default color depth (like 24 or 32) # is highly recommended. # DefaultDepth 8 # DefaultDepth 16 DefaultDepth 24 # DefaultDepth 32 # "1024x768" is also a conservative usable default resolution. If you # have a better monitor, feel free to try resolutions such as # "1152x864", "1280x1024", "1600x1200", and "1800x1400" (or whatever your # card/monitor can produce) Subsection "Display" Depth 8 Modes "1280x1024/100Hz" "800x600" "640x480" Virtual 0 0 EndSubsection Subsection "Display" Depth 16 Modes "1280x1024/100Hz" "800x600" "640x480" Virtual 0 0 EndSubsection Subsection "Display" Depth 24 Modes "1280x1024/100Hz" "800x600" "640x480" Virtual 0 0 EndSubsection Subsection "Display" Depth 32 Modes "1280x1024/100Hz" "800x600" "640x480" Virtual 0 0 EndSubsection EndSection # ********************************************************************** # ServerLayout sections. # ********************************************************************** # Any number of ServerLayout sections may be present. Each describes # the way multiple screens are organised. A specific ServerLayout # section may be specified from the X server command line with the # "-layout" option. In the absence of this, the first section is used. # When now ServerLayout section is present, the first Screen section # is used alone. Section "ServerLayout" # The Identifier line must be present Identifier "Simple Layout" # Each Screen line specifies a Screen section name, and optionally # the relative position of other screens. The four names after # primary screen name are the screens to the top, bottom, left and right # of the primary screen. In this example, screen 2 is located to the # right of screen 1. Screen "Screen 1" # Each InputDevice line specifies an InputDevice section name and # optionally some options to specify the way the device is to be # used. Those options include "CorePointer", "CoreKeyboard" and # "SendCoreEvents". InputDevice "Mouse1" "CorePointer" InputDevice "Keyboard1" "CoreKeyboard" EndSection Section "InputDevice" Identifier "Keyboard" Option "XkbModel" "pc104" Option "XkbLayout" "us" Driver "keyboard" EndSection Section "InputDevice" Identifier "Mouse" Option "Protocol" "" Option "Device" "/dev/mouse" Driver "mouse" Option "ZAxisMapping" "4 5" EndSection ----------------------------------------------- other details: im using Slackware 9.0 and have a Geforce 4 ti 4600. i have the same problem with framebuffer on or off.. Thanks for all the help in advance... -- _______________________________________________ http://www.ign.com Upgrade to Premium IGN Email - 15MB of space - No ads! - Pop3 Downloads Powered by Outblaze _______________________________________________ XFree86 mailing list XFree86@xxxxxxxxxxx http://XFree86.Org/mailman/listinfo/xfree86
