I am sending the file XFree86.0.log to you. Thanks. Alessandro Badin. Brasil.
XFree86 Version 4.3.0 Release Date: 27 February 2003 X Protocol Version 11, Revision 0, Release 6.6 Build Operating System: Linux 2.4.20 i686 [ELF] Build Date: 01 March 2003 Before reporting problems, check http://www.XFree86.Org/ to make sure that you have the latest version. Module Loader present Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/XFree86.0.log", Time: Sat Nov 15 08:33:31 2003 (==) Using config file: "/etc/X11/XF86Config" (==) ServerLayout "Simple Layout" (**) |-->Screen "Screen 1" (0) (**) | |-->Monitor "My Monitor" (**) | |-->Device "VESA Framebuffer" (**) |-->Input Device "Mouse1" (**) |-->Input Device "Keyboard1" (==) Keyboard: CustomKeycode disabled (WW) `fonts.dir' not found (or not valid) in "/usr/X11R6/lib/X11/fonts/100dpi/". Entry deleted from font path. (Run 'mkfontdir' on "/usr/X11R6/lib/X11/fonts/100dpi/"). (WW) `fonts.dir' not found (or not valid) in "/usr/X11R6/lib/X11/fonts/100dpi/". Entry deleted from font path. (Run 'mkfontdir' on "/usr/X11R6/lib/X11/fonts/100dpi/"). (WW) `fonts.dir' not found (or not valid) in "/usr/X11R6/lib/X11/fonts/cyrillic/". Entry deleted from font path. (Run 'mkfontdir' on "/usr/X11R6/lib/X11/fonts/cyrillic/"). (**) FontPath set to "/usr/X11R6/lib/X11/fonts/local/,/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/75dpi/:unscaled,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/CID/,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/75dpi/" (**) RgbPath set to "/usr/X11R6/lib/X11/rgb" (==) ModulePath set to "/usr/X11R6/lib/modules" (--) using VT number 7 (WW) Open APM failed (/dev/apm_bios) (No such device) (II) Module ABI versions: XFree86 ANSI C Emulation: 0.2 XFree86 Video Driver: 0.6 XFree86 XInput driver : 0.4 XFree86 Server Extension : 0.2 XFree86 Font Renderer : 0.4 (II) Loader running on linux (II) LoadModule: "bitmap" (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a (II) Module bitmap: vendor="The XFree86 Project" compiled for 4.3.0, module version = 1.0.0 Module class: XFree86 Font Renderer ABI class: XFree86 Font Renderer, version 0.4 (II) Loading font Bitmap (II) LoadModule: "pcidata" (II) Loading /usr/X11R6/lib/modules/libpcidata.a (II) Module pcidata: vendor="The XFree86 Project" compiled for 4.3.0, module version = 1.0.0 ABI class: XFree86 Video Driver, version 0.6 (II) PCI: Probing config type using method 1 (II) PCI: Config type is 1 (II) PCI: stages = 0x03, oldVal1 = 0x00000000, mode1Res1 = 0x80000000 (II) PCI: PCI scan (all values are in hex) (II) PCI: 00:00:0: chip 8086,7194 card 1179,0001 rev 01 class 06,00,00 hdr 00 (II) PCI: 00:04:0: chip 1023,9525 card 1179,0002 rev 49 class 03,00,00 hdr 00 (II) PCI: 00:07:0: chip 8086,7198 card 0000,0000 rev 01 class 06,80,00 hdr 80 (II) PCI: 00:07:1: chip 8086,7199 card 0000,0000 rev 00 class 01,01,80 hdr 00 (II) PCI: 00:07:2: chip 8086,719a card 0000,0000 rev 00 class 0c,03,00 hdr 00 (II) PCI: 00:07:3: chip 8086,719b card 0000,0000 rev 00 class 06,80,00 hdr 00 (II) PCI: 00:09:0: chip 1179,0d01 card 1179,0001 rev 00 class 0d,00,00 hdr 00 (II) PCI: 00:0b:0: chip 1179,0617 card 4000,0000 rev 20 class 06,07,00 hdr 82 (II) PCI: 00:0c:0: chip 125d,1978 card 1179,0001 rev 10 class 04,01,00 hdr 00 (II) PCI: 00:0d:0: chip 11c1,0441 card 1179,0001 rev 01 class 07,80,00 hdr 00 (II) PCI: End of PCI scan (II) Host-to-PCI bridge: (II) Bus 0: bridge is at (0:0:0), (0,0,20), BCTRL: 0x0008 (VGA_EN is set) (II) Bus 0 I/O range: [0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B] (II) Bus 0 non-prefetchable memory range: [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B] (II) Bus 0 prefetchable memory range: [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B] (II) PCI-to-CardBus bridge: (II) Bus 20: bridge is at (0:11:0), (0,20,20), BCTRL: 0x0580 (VGA_EN is cleared) (II) Bus 20 I/O range: [0] -1 0 0x00004000 - 0x000040ff (0x100) IX[B] [1] -1 0 0x00004400 - 0x000044ff (0x100) IX[B] (II) Bus 20 non-prefetchable memory range: [0] -1 0 0x10800000 - 0x10bfffff (0x400000) MX[B] (II) Bus 20 prefetchable memory range: [0] -1 0 0x10400000 - 0x107fffff (0x400000) MX[B] (--) PCI:*(0:4:0) Trident Microsystems Cyber 9525 rev 73, Mem @ 0xff400000/22, 0xff3e0000/17, 0xfec00000/22 (II) Addressable bus resource ranges are [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B] [1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B] (II) OS-reported resource ranges: [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] (II) Active PCI resource ranges: [0] -1 0 0xffefff00 - 0xffefffff (0x100) MX[B] [1] -1 0 0xfec00000 - 0xfeffffff (0x400000) MX[B](B) [2] -1 0 0xff3e0000 - 0xff3fffff (0x20000) MX[B](B) [3] -1 0 0xff400000 - 0xff7fffff (0x400000) MX[B](B) [4] -1 0 0x00001c00 - 0x00001cff (0x100) IX[B] [5] -1 0 0x000002f8 - 0x000002ff (0x8) IX[B] [6] -1 0 0x0000fc00 - 0x0000fcff (0x100) IX[B] [7] -1 0 0x0000ff60 - 0x0000ff7f (0x20) IX[B] [8] -1 0 0x0000ff80 - 0x0000ff9f (0x20) IX[B] [9] -1 0 0x0000fff0 - 0x0000ffff (0x10) IX[B] (II) Active PCI resource ranges after removing overlaps: [0] -1 0 0xffefff00 - 0xffefffff (0x100) MX[B] [1] -1 0 0xfec00000 - 0xfeffffff (0x400000) MX[B](B) [2] -1 0 0xff3e0000 - 0xff3fffff (0x20000) MX[B](B) [3] -1 0 0xff400000 - 0xff7fffff (0x400000) MX[B](B) [4] -1 0 0x00001c00 - 0x00001cff (0x100) IX[B] [5] -1 0 0x000002f8 - 0x000002ff (0x8) IX[B] [6] -1 0 0x0000fc00 - 0x0000fcff (0x100) IX[B] [7] -1 0 0x0000ff60 - 0x0000ff7f (0x20) IX[B] [8] -1 0 0x0000ff80 - 0x0000ff9f (0x20) IX[B] [9] -1 0 0x0000fff0 - 0x0000ffff (0x10) IX[B] (II) OS-reported resource ranges after removing overlaps with PCI: [0] -1 0 0xffe00000 - 0xffdfffff (0x0) MX[B](B) [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] (II) All system resource ranges: [0] -1 0 0xffe00000 - 0xffdfffff (0x0) MX[B](B) [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [5] -1 0 0xffefff00 - 0xffefffff (0x100) MX[B] [6] -1 0 0xfec00000 - 0xfeffffff (0x400000) MX[B](B) [7] -1 0 0xff3e0000 - 0xff3fffff (0x20000) MX[B](B) [8] -1 0 0xff400000 - 0xff7fffff (0x400000) MX[B](B) [9] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [10] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [11] -1 0 0x00001c00 - 0x00001cff (0x100) IX[B] [12] -1 0 0x000002f8 - 0x000002ff (0x8) IX[B] [13] -1 0 0x0000fc00 - 0x0000fcff (0x100) IX[B] [14] -1 0 0x0000ff60 - 0x0000ff7f (0x20) IX[B] [15] -1 0 0x0000ff80 - 0x0000ff9f (0x20) IX[B] [16] -1 0 0x0000fff0 - 0x0000ffff (0x10) IX[B] (II) LoadModule: "dbe" (II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a (II) Module dbe: vendor="The XFree86 Project" compiled for 4.3.0, module version = 1.0.0 Module class: XFree86 Server Extension ABI class: XFree86 Server Extension, version 0.2 (II) Loading extension DOUBLE-BUFFER (II) LoadModule: "extmod" (II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a (II) Module extmod: vendor="The XFree86 Project" compiled for 4.3.0, module version = 1.0.0 Module class: XFree86 Server Extension ABI class: XFree86 Server Extension, version 0.2 (II) Loading extension SHAPE (II) Loading extension MIT-SUNDRY-NONSTANDARD (II) Loading extension BIG-REQUESTS (II) Loading extension SYNC (II) Loading extension MIT-SCREEN-SAVER (II) Loading extension XC-MISC (II) Loading extension XFree86-VidModeExtension (II) Loading extension XFree86-Misc (II) Loading extension DPMS (II) Loading extension FontCache (II) Loading extension TOG-CUP (II) Loading extension Extended-Visual-Information (II) Loading extension XVideo (II) Loading extension XVideo-MotionCompensation (II) Loading extension X-Resource (II) LoadModule: "type1" (II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a (II) Module type1: vendor="The XFree86 Project" compiled for 4.3.0, module version = 1.0.2 Module class: XFree86 Font Renderer ABI class: XFree86 Font Renderer, version 0.4 (II) Loading font Type1 (II) Loading font CID (II) LoadModule: "freetype" (II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.a (II) Module freetype: vendor="The XFree86 Project" compiled for 4.3.0, module version = 2.0.2 Module class: XFree86 Font Renderer ABI class: XFree86 Font Renderer, version 0.4 (II) Loading font FreeType (II) LoadModule: "speedo" (II) Loading /usr/X11R6/lib/modules/fonts/libspeedo.a (II) Module speedo: vendor="The XFree86 Project" compiled for 4.3.0, module version = 1.0.1 Module class: XFree86 Font Renderer ABI class: XFree86 Font Renderer, version 0.4 (II) Loading font Speedo (II) LoadModule: "glx" (II) Loading /usr/X11R6/lib/modules/extensions/libglx.a (II) Module glx: vendor="The XFree86 Project" compiled for 4.3.0, module version = 1.0.0 ABI class: XFree86 Server Extension, version 0.2 (II) Loading sub module "GLcore" (II) LoadModule: "GLcore" (II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a (II) Module GLcore: vendor="The XFree86 Project" compiled for 4.3.0, module version = 1.0.0 ABI class: XFree86 Server Extension, version 0.2 (II) Loading extension GLX (II) LoadModule: "vesa" (II) Loading /usr/X11R6/lib/modules/drivers/vesa_drv.o (II) Module vesa: vendor="The XFree86 Project" compiled for 4.3.0, module version = 1.0.0 Module class: XFree86 Video Driver ABI class: XFree86 Video Driver, version 0.6 (II) LoadModule: "mouse" (II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o (II) Module mouse: vendor="The XFree86 Project" compiled for 4.3.0, module version = 1.0.0 Module class: XFree86 XInput Driver ABI class: XFree86 XInput driver, version 0.4 (II) VESA: driver for VESA chipsets: vesa (II) Primary Device is: PCI 00:04:0 (--) Assigning device section with no busID to primary device (--) Chipset vesa found (II) resource ranges after xf86ClaimFixedResources() call: [0] -1 0 0xffe00000 - 0xffdfffff (0x0) MX[B](B) [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [5] -1 0 0xffefff00 - 0xffefffff (0x100) MX[B] [6] -1 0 0xfec00000 - 0xfeffffff (0x400000) MX[B](B) [7] -1 0 0xff3e0000 - 0xff3fffff (0x20000) MX[B](B) [8] -1 0 0xff400000 - 0xff7fffff (0x400000) MX[B](B) [9] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [10] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [11] -1 0 0x00001c00 - 0x00001cff (0x100) IX[B] [12] -1 0 0x000002f8 - 0x000002ff (0x8) IX[B] [13] -1 0 0x0000fc00 - 0x0000fcff (0x100) IX[B] [14] -1 0 0x0000ff60 - 0x0000ff7f (0x20) IX[B] [15] -1 0 0x0000ff80 - 0x0000ff9f (0x20) IX[B] [16] -1 0 0x0000fff0 - 0x0000ffff (0x10) IX[B] (II) resource ranges after probing: [0] -1 0 0xffe00000 - 0xffdfffff (0x0) MX[B](B) [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [5] -1 0 0xffefff00 - 0xffefffff (0x100) MX[B] [6] -1 0 0xfec00000 - 0xfeffffff (0x400000) MX[B](B) [7] -1 0 0xff3e0000 - 0xff3fffff (0x20000) MX[B](B) [8] -1 0 0xff400000 - 0xff7fffff (0x400000) MX[B](B) [9] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B] [10] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B] [11] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B] [12] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [13] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [14] -1 0 0x00001c00 - 0x00001cff (0x100) IX[B] [15] -1 0 0x000002f8 - 0x000002ff (0x8) IX[B] [16] -1 0 0x0000fc00 - 0x0000fcff (0x100) IX[B] [17] -1 0 0x0000ff60 - 0x0000ff7f (0x20) IX[B] [18] -1 0 0x0000ff80 - 0x0000ff9f (0x20) IX[B] [19] -1 0 0x0000fff0 - 0x0000ffff (0x10) IX[B] [20] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B] [21] 0 0 0x000003c0 - 0x000003df (0x20) IS[B] (II) Setting vga for screen 0. (II) Loading sub module "vbe" (II) LoadModule: "vbe" (II) Loading /usr/X11R6/lib/modules/libvbe.a (II) Module vbe: vendor="The XFree86 Project" compiled for 4.3.0, module version = 1.1.0 ABI class: XFree86 Video Driver, version 0.6 (II) Loading sub module "int10" (II) LoadModule: "int10" (II) Loading /usr/X11R6/lib/modules/linux/libint10.a (II) Module int10: vendor="The XFree86 Project" compiled for 4.3.0, module version = 1.0.0 ABI class: XFree86 Video Driver, version 0.6 (II) VESA(0): initializing int10 (II) VESA(0): Primary V_BIOS segment is: 0xc000 (II) VESA(0): VESA BIOS detected (II) VESA(0): VESA VBE Version 2.0 (II) VESA(0): VESA VBE Total Mem: 2560 kB (II) VESA(0): VESA VBE OEM: Copyright 1997 TRIDENT MICROSYSTEMS INC. (II) VESA(0): VESA VBE OEM Software Rev: 0.0 (II) VESA(0): VESA VBE OEM Vendor: (II) VESA(0): VESA VBE OEM Product: (II) VESA(0): VESA VBE OEM Product Rev: (**) VESA(0): Depth 24, (--) framebuffer bpp 32 (==) VESA(0): RGB weight 888 (==) VESA(0): Default visual is TrueColor (==) VESA(0): Using gamma correction (1.0, 1.0, 1.0) (II) Loading sub module "ddc" (II) LoadModule: "ddc" (II) Loading /usr/X11R6/lib/modules/libddc.a (II) Module ddc: vendor="The XFree86 Project" compiled for 4.3.0, module version = 1.0.0 ABI class: XFree86 Video Driver, version 0.6 (II) VESA(0): VESA VBE DDC supported (II) VESA(0): VESA VBE DDC Level 2 (II) VESA(0): VESA VBE DDC transfer in appr. 1 sec. (II) VESA(0): VESA VBE DDC read successfully (II) VESA(0): Manufacturer: TOS Model: 5081 Serial#: 0 (II) VESA(0): Year: 1995 Week: 20 (II) VESA(0): EDID Version: 1.0 (II) VESA(0): Digital Display Input (II) VESA(0): Max H-Image Size [cm]: horiz.: 23 vert.: 17 (II) VESA(0): Gamma: 1.00 (II) VESA(0): No DPMS capabilities specified; RGB/Color Display (II) VESA(0): redX: 0.000 redY: 0.000 greenX: 0.000 greenY: 0.000 (II) VESA(0): blueX: 0.000 blueY: 0.000 whiteX: 0.000 whiteY: 0.000 (II) VESA(0): Supported VESA Video Modes: (II) VESA(0): 640x480@60Hz (II) VESA(0): 800x600@60Hz (II) VESA(0): Manufacturer's mask: 0 (II) VESA(0): Searching for matching VESA mode(s): *Mode: 112 (640x480) ModeAttributes: 0x39b WinAAttributes: 0x7 WinBAttributes: 0x0 WinGranularity: 64 WinSize: 64 WinASegment: 0xa000 WinBSegment: 0xa000 WinFuncPtr: 0xc0008a06 BytesPerScanline: 2560 XResolution: 640 YResolution: 480 XCharSize: 8 YCharSize: 16 NumberOfPlanes: 1 BitsPerPixel: 32 NumberOfBanks: 1 MemoryModel: 6 BankSize: 0 NumberOfImages: 1 RedMaskSize: 8 RedFieldPosition: 16 GreenMaskSize: 8 GreenFieldPosition: 8 BlueMaskSize: 8 BlueFieldPosition: 0 RsvdMaskSize: 0 RsvdFieldPosition: 0 DirectColorModeInfo: 0 PhysBasePtr: 0xff400000 *Mode: 115 (800x600) ModeAttributes: 0x39b WinAAttributes: 0x7 WinBAttributes: 0x0 WinGranularity: 64 WinSize: 64 WinASegment: 0xa000 WinBSegment: 0xa000 WinFuncPtr: 0xc0008a06 BytesPerScanline: 3200 XResolution: 800 YResolution: 600 XCharSize: 8 YCharSize: 16 NumberOfPlanes: 1 BitsPerPixel: 32 NumberOfBanks: 1 MemoryModel: 6 BankSize: 0 NumberOfImages: 0 RedMaskSize: 8 RedFieldPosition: 16 GreenMaskSize: 8 GreenFieldPosition: 8 BlueMaskSize: 8 BlueFieldPosition: 0 RsvdMaskSize: 0 RsvdFieldPosition: 0 DirectColorModeInfo: 0 PhysBasePtr: 0xff400000 Mode: 113 (800x600) ModeAttributes: 0x19b WinAAttributes: 0x7 WinBAttributes: 0x0 WinGranularity: 64 WinSize: 64 WinASegment: 0xa000 WinBSegment: 0xa000 WinFuncPtr: 0xc0008a06 BytesPerScanline: 1600 XResolution: 800 YResolution: 600 XCharSize: 8 YCharSize: 16 NumberOfPlanes: 1 BitsPerPixel: 16 NumberOfBanks: 1 MemoryModel: 6 BankSize: 0 NumberOfImages: 1 RedMaskSize: 5 RedFieldPosition: 10 GreenMaskSize: 5 GreenFieldPosition: 5 BlueMaskSize: 5 BlueFieldPosition: 0 RsvdMaskSize: 1 RsvdFieldPosition: 15 DirectColorModeInfo: 0 PhysBasePtr: 0xff400000 Mode: 114 (800x600) ModeAttributes: 0x19b WinAAttributes: 0x7 WinBAttributes: 0x0 WinGranularity: 64 WinSize: 64 WinASegment: 0xa000 WinBSegment: 0xa000 WinFuncPtr: 0xc0008a06 BytesPerScanline: 1600 XResolution: 800 YResolution: 600 XCharSize: 8 YCharSize: 16 NumberOfPlanes: 1 BitsPerPixel: 16 NumberOfBanks: 1 MemoryModel: 6 BankSize: 0 NumberOfImages: 1 RedMaskSize: 5 RedFieldPosition: 11 GreenMaskSize: 6 GreenFieldPosition: 5 BlueMaskSize: 5 BlueFieldPosition: 0 RsvdMaskSize: 0 RsvdFieldPosition: 0 DirectColorModeInfo: 0 PhysBasePtr: 0xff400000 Mode: 110 (640x480) ModeAttributes: 0x19b WinAAttributes: 0x7 WinBAttributes: 0x0 WinGranularity: 64 WinSize: 64 WinASegment: 0xa000 WinBSegment: 0xa000 WinFuncPtr: 0xc0008a06 BytesPerScanline: 1280 XResolution: 640 YResolution: 480 XCharSize: 8 YCharSize: 16 NumberOfPlanes: 1 BitsPerPixel: 16 NumberOfBanks: 1 MemoryModel: 6 BankSize: 0 NumberOfImages: 2 RedMaskSize: 5 RedFieldPosition: 10 GreenMaskSize: 5 GreenFieldPosition: 5 BlueMaskSize: 5 BlueFieldPosition: 0 RsvdMaskSize: 1 RsvdFieldPosition: 15 DirectColorModeInfo: 0 PhysBasePtr: 0xff400000 Mode: 111 (640x480) ModeAttributes: 0x19b WinAAttributes: 0x7 WinBAttributes: 0x0 WinGranularity: 64 WinSize: 64 WinASegment: 0xa000 WinBSegment: 0xa000 WinFuncPtr: 0xc0008a06 BytesPerScanline: 1280 XResolution: 640 YResolution: 480 XCharSize: 8 YCharSize: 16 NumberOfPlanes: 1 BitsPerPixel: 16 NumberOfBanks: 1 MemoryModel: 6 BankSize: 0 NumberOfImages: 2 RedMaskSize: 5 RedFieldPosition: 11 GreenMaskSize: 6 GreenFieldPosition: 5 BlueMaskSize: 5 BlueFieldPosition: 0 RsvdMaskSize: 0 RsvdFieldPosition: 0 DirectColorModeInfo: 0 PhysBasePtr: 0xff400000 Mode: 100 (640x400) ModeAttributes: 0x19f WinAAttributes: 0x7 WinBAttributes: 0x0 WinGranularity: 64 WinSize: 64 WinASegment: 0xa000 WinBSegment: 0xa000 WinFuncPtr: 0xc0008a06 BytesPerScanline: 640 XResolution: 640 YResolution: 400 XCharSize: 8 YCharSize: 16 NumberOfPlanes: 1 BitsPerPixel: 8 NumberOfBanks: 1 MemoryModel: 4 BankSize: 0 NumberOfImages: 8 RedMaskSize: 0 RedFieldPosition: 0 GreenMaskSize: 0 GreenFieldPosition: 0 BlueMaskSize: 0 BlueFieldPosition: 0 RsvdMaskSize: 0 RsvdFieldPosition: 0 DirectColorModeInfo: 0 PhysBasePtr: 0xff400000 Mode: 103 (800x600) ModeAttributes: 0x19f WinAAttributes: 0x7 WinBAttributes: 0x0 WinGranularity: 64 WinSize: 64 WinASegment: 0xa000 WinBSegment: 0xa000 WinFuncPtr: 0xc0008a06 BytesPerScanline: 800 XResolution: 800 YResolution: 600 XCharSize: 8 YCharSize: 16 NumberOfPlanes: 1 BitsPerPixel: 8 NumberOfBanks: 1 MemoryModel: 4 BankSize: 0 NumberOfImages: 3 RedMaskSize: 0 RedFieldPosition: 0 GreenMaskSize: 0 GreenFieldPosition: 0 BlueMaskSize: 0 BlueFieldPosition: 0 RsvdMaskSize: 0 RsvdFieldPosition: 0 DirectColorModeInfo: 0 PhysBasePtr: 0xff400000 Mode: 102 (800x600) ModeAttributes: 0x9f WinAAttributes: 0x7 WinBAttributes: 0x0 WinGranularity: 64 WinSize: 64 WinASegment: 0xa000 WinBSegment: 0xa000 WinFuncPtr: 0xc0008a06 BytesPerScanline: 100 XResolution: 800 YResolution: 600 XCharSize: 8 YCharSize: 16 NumberOfPlanes: 4 BitsPerPixel: 4 NumberOfBanks: 1 MemoryModel: 3 BankSize: 0 NumberOfImages: 8 RedMaskSize: 0 RedFieldPosition: 0 GreenMaskSize: 0 GreenFieldPosition: 0 BlueMaskSize: 0 BlueFieldPosition: 0 RsvdMaskSize: 0 RsvdFieldPosition: 0 DirectColorModeInfo: 0 PhysBasePtr: 0xff400000 Mode: 6a (800x600) ModeAttributes: 0x9f WinAAttributes: 0x7 WinBAttributes: 0x0 WinGranularity: 64 WinSize: 64 WinASegment: 0xa000 WinBSegment: 0xa000 WinFuncPtr: 0xc0008a06 BytesPerScanline: 100 XResolution: 800 YResolution: 600 XCharSize: 8 YCharSize: 16 NumberOfPlanes: 4 BitsPerPixel: 4 NumberOfBanks: 1 MemoryModel: 3 BankSize: 0 NumberOfImages: 8 RedMaskSize: 0 RedFieldPosition: 0 GreenMaskSize: 0 GreenFieldPosition: 0 BlueMaskSize: 0 BlueFieldPosition: 0 RsvdMaskSize: 0 RsvdFieldPosition: 0 DirectColorModeInfo: 0 PhysBasePtr: 0xff400000 Mode: 101 (640x480) ModeAttributes: 0x19f WinAAttributes: 0x7 WinBAttributes: 0x0 WinGranularity: 64 WinSize: 64 WinASegment: 0xa000 WinBSegment: 0xa000 WinFuncPtr: 0xc0008a06 BytesPerScanline: 640 XResolution: 640 YResolution: 480 XCharSize: 8 YCharSize: 16 NumberOfPlanes: 1 BitsPerPixel: 8 NumberOfBanks: 1 MemoryModel: 4 BankSize: 0 NumberOfImages: 6 RedMaskSize: 0 RedFieldPosition: 0 GreenMaskSize: 0 GreenFieldPosition: 0 BlueMaskSize: 0 BlueFieldPosition: 0 RsvdMaskSize: 0 RsvdFieldPosition: 0 DirectColorModeInfo: 0 PhysBasePtr: 0xff400000 (II) VESA(0): Total Memory: 40 64KB banks (2560kB) (II) VESA(0): My Monitor: Using hsync range of 31.50-50.00 kHz (II) VESA(0): My Monitor: Using vrefresh range of 40.00-90.00 Hz (II) VESA(0): Not using mode "1024x768" (no mode of this name) (--) VESA(0): Virtual size is 800x600 (pitch 800) (**) VESA(0): *Built-in mode "800x600" (**) VESA(0): *Built-in mode "640x480" (--) VESA(0): Display dimensions: (230, 170) mm (--) VESA(0): DPI set to (88, 89) (II) VESA(0): Attempting to use 72Hz refresh for mode "800x600" (115) (II) VESA(0): Attempting to use 85Hz refresh for mode "640x480" (112) (**) VESA(0): Using "Shadow Framebuffer" (II) Loading sub module "shadow" (II) LoadModule: "shadow" (II) Loading /usr/X11R6/lib/modules/libshadow.a (II) Module shadow: vendor="The XFree86 Project" compiled for 4.3.0, module version = 1.0.0 ABI class: XFree86 ANSI C Emulation, version 0.2 (II) Loading sub module "fb" (II) LoadModule: "fb" (II) Loading /usr/X11R6/lib/modules/libfb.a (II) Module fb: vendor="The XFree86 Project" compiled for 4.3.0, module version = 1.0.0 ABI class: XFree86 ANSI C Emulation, version 0.2 (--) Depth 24 pixmap format is 32 bpp (II) do I need RAC? No, I don't. (II) resource ranges after preInit: [0] -1 0 0xffe00000 - 0xffdfffff (0x0) MX[B](B) [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [5] -1 0 0xffefff00 - 0xffefffff (0x100) MX[B] [6] -1 0 0xfec00000 - 0xfeffffff (0x400000) MX[B](B) [7] -1 0 0xff3e0000 - 0xff3fffff (0x20000) MX[B](B) [8] -1 0 0xff400000 - 0xff7fffff (0x400000) MX[B](B) [9] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B] [10] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B] [11] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B] [12] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [13] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [14] -1 0 0x00001c00 - 0x00001cff (0x100) IX[B] [15] -1 0 0x000002f8 - 0x000002ff (0x8) IX[B] [16] -1 0 0x0000fc00 - 0x0000fcff (0x100) IX[B] [17] -1 0 0x0000ff60 - 0x0000ff7f (0x20) IX[B] [18] -1 0 0x0000ff80 - 0x0000ff9f (0x20) IX[B] [19] -1 0 0x0000fff0 - 0x0000ffff (0x10) IX[B] [20] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B] [21] 0 0 0x000003c0 - 0x000003df (0x20) IS[B] (II) Loading sub module "int10" (II) LoadModule: "int10" (II) Reloading /usr/X11R6/lib/modules/linux/libint10.a (II) VESA(0): initializing int10 (II) VESA(0): Primary V_BIOS segment is: 0xc000 (II) VESA(0): VESA BIOS detected (II) VESA(0): VESA VBE Version 2.0 (II) VESA(0): VESA VBE Total Mem: 2560 kB (II) VESA(0): VESA VBE OEM: Copyright 1997 TRIDENT MICROSYSTEMS INC. (II) VESA(0): VESA VBE OEM Software Rev: 0.0 (II) VESA(0): VESA VBE OEM Vendor: (II) VESA(0): VESA VBE OEM Product: (II) VESA(0): VESA VBE OEM Product Rev: (II) VESA(0): Splitting WC range: base: 0xff400000, size: 0x280000 (==) VESA(0): Write-combining range (0xff600000,0x80000) (==) VESA(0): Write-combining range (0xff400000,0x280000) (II) VESA(0): virtual address = 0x40278000, physical address = 0xff400000, size = 2621440 (==) VESA(0): Default visual is TrueColor (==) VESA(0): Backing store disabled (==) RandR enabled (II) Setting vga for screen 0. (II) Initializing built-in extension MIT-SHM (II) Initializing built-in extension XInputExtension (II) Initializing built-in extension XTEST (II) Initializing built-in extension XKEYBOARD (II) Initializing built-in extension LBX (II) Initializing built-in extension XC-APPGROUP (II) Initializing built-in extension SECURITY (II) Initializing built-in extension XINERAMA (II) Initializing built-in extension XFree86-Bigfont (II) Initializing built-in extension RENDER (II) Initializing built-in extension RANDR (**) Option "Protocol" "PS/2" (**) Mouse1: Protocol: "PS/2" (**) Option "CorePointer" (**) Mouse1: Core Pointer (**) Option "Device" "/dev/mouse" (**) Mouse1: Emulate3Buttons, Emulate3Timeout: 50 (==) Mouse1: Buttons: 3 (II) Keyboard "Keyboard1" handled by legacy driver (II) XINPUT: Adding extended input device "Mouse1" (type: MOUSE) (II) Mouse1: ps2EnableDataReporting: succeeded (WW) Open APM failed (/dev/apm_bios) (No such device) (II) Mouse1: ps2EnableDataReporting: succeeded (WW) Open APM failed (/dev/apm_bios) (No such device) (II) Mouse1: ps2EnableDataReporting: succeeded (WW) Open APM failed (/dev/apm_bios) (No such device) (II) Mouse1: ps2EnableDataReporting: succeeded (II) 3rd Button detected: disabling emulate3Button
# File generated by xf86config.
#
# Copyright (c) 1999 by The XFree86 Project, Inc.
#
# Permission is hereby granted, free of charge, to any person obtaining a
# copy of this software and associated documentation files (the "Software"),
# to deal in the Software without restriction, including without limitation
# the rights to use, copy, modify, merge, publish, distribute, sublicense,
# and/or sell copies of the Software, and to permit persons to whom the
# Software is furnished to do so, subject to the following conditions:
#
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
#
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
# THE XFREE86 PROJECT BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
# WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
# OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
# SOFTWARE.
#
# Except as contained in this notice, the name of the XFree86 Project shall
# not be used in advertising or otherwise to promote the sale, use or other
# dealings in this Software without prior written authorization from the
# XFree86 Project.
#
# **********************************************************************
# Refer to the XF86Config(4/5) man page for details about the format of
# this file.
# **********************************************************************
# NOTE: This is a NEW IMPROVED version of XF86Config-fbdev that uses the vesa
# driver instead of the fbdev driver. Thanks to Kenneth Fanyo who pointed
# this out to me. :)
# This XF86Config file is designed for use with the VESA framebuffer.
# This generic interface should work with nearly all video cards
# (although not every card will support every resolution).
# With the new driver, it should no longer be required to have frame buffer
# support in the kernel, or to run it on the console.
#
# Enjoy! :)
# -- volkerdi@xxxxxxxxxxxxx
#
# **********************************************************************
# Module section -- this section is used to specify
# which dynamically loadable modules to load.
# **********************************************************************
#
Section "Module"
# This loads the DBE extension module.
Load "dbe" # Double buffer extension
# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
SubSection "extmod"
Option "omit xfree86-dga" # don't initialise the DGA extension
EndSubSection
# This loads the font modules
Load "type1"
Load "freetype"
Load "speedo"
# This loads the GLX module
Load "glx"
EndSection
# **********************************************************************
# Files section. This allows default font and rgb paths to be set
# **********************************************************************
Section "Files"
# The location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.
RgbPath "/usr/X11R6/lib/X11/rgb"
# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
#
# If you don't have a floating point coprocessor and emacs, Mosaic or other
# programs take long to start up, try moving the Type1 and Speedo directory
# to the end of this list (or comment them out).
#
FontPath "/usr/X11R6/lib/X11/fonts/local/"
FontPath "/usr/X11R6/lib/X11/fonts/misc/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/Type1/"
FontPath "/usr/X11R6/lib/X11/fonts/CID/"
FontPath "/usr/X11R6/lib/X11/fonts/Speedo/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/"
FontPath "/usr/X11R6/lib/X11/fonts/cyrillic/"
# ModulePath can be used to set a search path for the X server modules.
# The default path is shown here.
# ModulePath "/usr/X11R6/lib/modules"
EndSection
# **********************************************************************
# Server flags section.
# **********************************************************************
Section "ServerFlags"
# Uncomment this to cause a core dump at the spot where a signal is
# received. This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging
# Option "NoTrapSignals"
# Uncomment this to disable the <Crtl><Alt><Fn> VT switch sequence
# (where n is 1 through 12). This allows clients to receive these key
# events.
# Option "DontVTSwitch"
# Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
# This allows clients to receive this key event.
# Option "DontZap"
# Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
# sequences. This allows clients to receive these key events.
# Option "DontZoom"
# Uncomment this to disable tuning with the xvidtune client. With
# it the client can still run and fetch card and monitor attributes,
# but it will not be allowed to change them. If it tries it will
# receive a protocol error.
# Option "DisableVidModeExtension"
# Uncomment this to enable the use of a non-local xvidtune client.
# Option "AllowNonLocalXvidtune"
# Uncomment this to disable dynamically modifying the input device
# (mouse and keyboard) settings.
# Option "DisableModInDev"
# Uncomment this to enable the use of a non-local client to
# change the keyboard or mouse settings (currently only xset).
# Option "AllowNonLocalModInDev"
# Set the basic blanking screen saver timeout.
# Option "blank time" "10" # 10 minutes
# Set the DPMS timeouts. These are set here because they are global
# rather than screen-specific. These settings alone don't enable DPMS.
# It is enabled per-screen (or per-monitor), and even then only when
# the driver supports it.
# Option "standby time" "20"
# Option "suspend time" "30"
# Option "off time" "60"
# On some platform the server needs to estimate the sizes of PCI
# memory and pio ranges. This is done by assuming that PCI ranges
# don't overlap. Some broken BIOSes tend to set ranges of inactive
# devices wrong. Here one can adjust how aggressive the assumptions
# should be. Default is 0.
# Option "EstimateSizesAggresively" "0"
EndSection
# **********************************************************************
# Input devices
# **********************************************************************
# **********************************************************************
# Core keyboard's InputDevice section
# **********************************************************************
Section "InputDevice"
Identifier "Keyboard1"
Driver "Keyboard"
# For most OSs the protocol can be omitted (it defaults to "Standard").
# When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
# uncomment the following line.
# Option "Protocol" "Xqueue"
# Set the keyboard auto repeat parameters. Not all platforms implement
# this.
# Option "AutoRepeat" "500 5"
# Specifiy which keyboard LEDs can be user-controlled (eg, with xset(1)).
# Option "Xleds" "1 2 3"
# To disable the XKEYBOARD extension, uncomment XkbDisable.
# Option "XkbDisable"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a European
# keyboard, you will probably want to use one of:
#
# Option "XkbModel" "pc102"
# Option "XkbModel" "pc105"
#
# If you have a Microsoft Natural keyboard, you can use:
#
# Option "XkbModel" "microsoft"
#
# If you have a US "windows" keyboard you will want:
#
# Option "XkbModel" "pc104"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
#
# Option "XkbLayout" "de"
#
# or:
#
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
#
# Option "XkbOptions" "ctrl:swapcaps"
# These are the default XKB settings for XFree86
#
# Option "XkbRules" "xfree86"
# Option "XkbModel" "pc101"
# Option "XkbLayout" "us"
# Option "XkbVariant" ""
# Option "XkbOptions" ""
EndSection
# **********************************************************************
# Core Pointer's InputDevice section
# **********************************************************************
Section "InputDevice"
# Identifier and driver
Identifier "Mouse1"
Driver "mouse"
# On platforms where PnP mouse detection is supported the following
# protocol setting can be used when using a newer PnP mouse:
# Option "Protocol" "Auto"
# The available mouse protocols types that you can set below are:
# Auto BusMouse GlidePoint GlidePointPS/2 IntelliMouse IMPS/2
# Logitech Microsoft MMHitTab MMSeries Mouseman MouseManPlusPS/2
# MouseSystems NetMousePS/2 NetScrollPS/2 OSMouse PS/2 SysMouse
# ThinkingMouse ThinkingMousePS/2 Xqueue
Option "Protocol" "PS/2"
# The mouse device. The device is normally set to /dev/mouse,
# which is usually a symbolic link to the real device.
Option "Device" "/dev/mouse"
# Option "Device" "/dev/psaux"
# Option "Device" "/dev/ttyS0"
# Option "Device" "/dev/ttyS1"
# When using XQUEUE, comment out the above two lines, and uncomment
# the following line.
# Option "Protocol" "Xqueue"
# Baudrate and SampleRate are only for some Logitech mice. In
# almost every case these lines should be omitted.
# Option "BaudRate" "9600"
# Option "SampleRate" "150"
# Emulate3Buttons is an option for 2-button Microsoft mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)
# Option "Emulate3Buttons"
# Option "Emulate3Timeout" "50"
# ChordMiddle is an option for some 3-button Logitech mice
# Option "ChordMiddle"
EndSection
# Some examples of extended input devices
# Section "InputDevice"
# Identifier "spaceball"
# Driver "magellan"
# Option "Device" "/dev/cua0"
# EndSection
#
# Section "InputDevice"
# Identifier "spaceball2"
# Driver "spaceorb"
# Option "Device" "/dev/cua0"
# EndSection
#
# Section "InputDevice"
# Identifier "touchscreen0"
# Driver "microtouch"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "1412"
# Option "MaxX" "15184"
# Option "MinY" "15372"
# Option "MaxY" "1230"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
#
# Section "InputDevice"
# Identifier "touchscreen1"
# Driver "elo2300"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "231"
# Option "MaxX" "3868"
# Option "MinY" "3858"
# Option "MaxY" "272"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonThreshold" "17"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
# **********************************************************************
# Monitor section
# **********************************************************************
# Any number of monitor sections may be present
Section "Monitor"
Identifier "My Monitor"
# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
HorizSync 31.5 - 50.0
# HorizSync 30-64 # multisync
# HorizSync 31.5, 35.2 # multiple fixed sync frequencies
# HorizSync 15-25, 30-50 # multiple ranges of sync frequencies
# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
VertRefresh 40-90
EndSection
# **********************************************************************
# Graphics device section
# **********************************************************************
# Any number of graphics device sections may be present
Section "Device"
Identifier "VESA Framebuffer"
Driver "vesa"
#VideoRam 4096
# Insert Clocks lines here if appropriate
EndSection
# **********************************************************************
# Screen sections
# **********************************************************************
# Any number of screen sections may be present. Each describes
# the configuration of a single screen. A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.
Section "Screen"
Identifier "Screen 1"
Device "VESA Framebuffer"
Monitor "My Monitor"
# If your card can handle it, a higher default color depth (like 24 or 32)
# is highly recommended.
# DefaultDepth 8
# DefaultDepth 16
DefaultDepth 24
# DefaultDepth 32
# "1024x768" is also a conservative usable default resolution. If you
# have a better monitor, feel free to try resolutions such as
# "1152x864", "1280x1024", "1600x1200", and "1800x1400" (or whatever your
# card/monitor can produce)
Subsection "Display"
Depth 8
Modes "1024x768" "800x600" "640x480"
EndSubsection
Subsection "Display"
Depth 16
Modes "1024x768" "800x600" "640x480"
EndSubsection
Subsection "Display"
Depth 24
Modes "1024x768" "800x600" "640x480"
EndSubsection
Subsection "Display"
Depth 32
Modes "1024x768" "800x600" "640x480"
EndSubsection
EndSection
# **********************************************************************
# ServerLayout sections.
# **********************************************************************
# Any number of ServerLayout sections may be present. Each describes
# the way multiple screens are organised. A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option. In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.
Section "ServerLayout"
# The Identifier line must be present
Identifier "Simple Layout"
# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens. The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen. In this example, screen 2 is located to the
# right of screen 1.
Screen "Screen 1"
# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used. Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".
InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection
