Well the mail is long enough now. I will repeat the question again and list the files requested. And try to find the thread about secondary cards for Radeon. Regards, Marcel -------------------------------------------------------------------------- Yesterday I installed three Appian Typhoon 64 cards in a system with XFree86 - 4.3.0. The Appian has an ATI Radeon VE on it. The first strange thing is that both displays of the first graphical card show the same from startup where I would expect only the first monitor to show the boot sequence etc. Second I tried to create 6 seperate display. Then the Server crashes. Adding the Load "ddc" Module resolved next messages: Symbol xf86SetDDCproperties from module /usr/X11R6/lib/modules/drivers/radeon_drv.o is unresolved! But still the server crashes. Attached are the /etc?X11/XF86config file and the /var/log/XFree86.0.log file. Just using Screen0 and screen1 and thus only the first graphical card works. Has anyone an idea what the problem is. Regards, Marcel Stegehuis ---------------------------------------------------------------------------- # ## lspci -vvx ### ########################################################################## 00:00.0 Host bridge: Intel Corp.: Unknown device 2578 (rev 02) Subsystem: Hewlett-Packard Company: Unknown device 12bf Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- Latency: 0 Region 0: Memory at d8000000 (32-bit, prefetchable) [size=128M] Capabilities: [e4] #09 [2106] Capabilities: [a0] AGP version 3.0 Status: RQ=31 SBA+ 64bit- FW+ Rate=x1,x2,x4 Command: RQ=0 SBA- AGP- 64bit- FW- Rate=<none> 00: 86 80 78 25 06 01 90 20 02 00 00 06 00 00 00 00 10: 08 00 00 d8 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 bf 12 30: 00 00 00 00 e4 00 00 00 00 00 00 00 00 00 00 00 00:01.0 PCI bridge: Intel Corp.: Unknown device 2579 (rev 02) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap- 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 Bus: primary=00, secondary=01, subordinate=01, sec-latency=32 BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- 00: 86 80 79 25 07 01 a0 00 02 00 04 06 00 40 01 00 10: 00 00 00 00 00 00 00 00 00 01 01 20 f0 00 a0 22 20: f0 ff 00 00 f0 ff 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 04 00 00:1d.0 USB Controller: Intel Corp. 82801EB USB (Hub #1) (rev 02) (prog-if 00 [UHCI]) Subsystem: Hewlett-Packard Company: Unknown device 12bf Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin A routed to IRQ 10 Region 4: I/O ports at 2440 [size=32] 00: 86 80 d2 24 05 00 80 02 02 00 03 0c 00 00 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 41 24 00 00 00 00 00 00 00 00 00 00 3c 10 bf 12 30: 00 00 00 00 00 00 00 00 00 00 00 00 0a 01 00 00 00:1d.1 USB Controller: Intel Corp. 82801EB USB (Hub #2) (rev 02) (prog-if 00 [UHCI]) Subsystem: Hewlett-Packard Company: Unknown device 12bf Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin B routed to IRQ 5 Region 4: I/O ports at 2460 [size=32] 00: 86 80 d4 24 05 00 80 02 02 00 03 0c 00 00 00 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 61 24 00 00 00 00 00 00 00 00 00 00 3c 10 bf 12 30: 00 00 00 00 00 00 00 00 00 00 00 00 05 02 00 00 00:1d.2 USB Controller: Intel Corp. 82801EB USB (Hub #3) (rev 02) (prog-if 00 [UHCI]) Subsystem: Hewlett-Packard Company: Unknown device 12bf Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin C routed to IRQ 5 Region 4: I/O ports at 2480 [size=32] 00: 86 80 d7 24 05 00 80 02 02 00 03 0c 00 00 00 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 81 24 00 00 00 00 00 00 00 00 00 00 3c 10 bf 12 30: 00 00 00 00 00 00 00 00 00 00 00 00 05 03 00 00 00:1d.7 USB Controller: Intel Corp. 82801EB USB EHCI Controller (rev 02) (prog-if 20 [EHCI]) Subsystem: Hewlett-Packard Company: Unknown device 12bf Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin D routed to IRQ 11 Region 0: Memory at f8500000 (32-bit, non-prefetchable) [size=1K] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [58] #0a [20a0] 00: 86 80 dd 24 06 01 90 02 02 20 03 0c 00 00 00 00 10: 00 00 50 f8 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 bf 12 30: 00 00 00 00 50 00 00 00 00 00 00 00 0b 04 00 00 00:1e.0 PCI bridge: Intel Corp. 82801BA/CA/DB PCI Bridge (rev c2) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Bus: primary=00, secondary=05, subordinate=05, sec-latency=64 I/O behind bridge: 00001000-00001fff Memory behind bridge: f8200000-f84fffff Prefetchable memory behind bridge: e0000000-f81fffff BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B- 00: 86 80 4e 24 07 01 80 00 c2 00 04 06 00 00 01 00 10: 00 00 00 00 00 00 00 00 00 05 05 40 10 10 80 22 20: 20 f8 40 f8 00 e0 10 f8 00 00 00 00 00 00 00 00 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0a 00 00:1f.0 ISA bridge: Intel Corp. 82801EB ISA Bridge (LPC) (rev 02) Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 00: 86 80 d0 24 0f 01 80 02 02 00 01 06 00 00 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:1f.1 IDE interface: Intel Corp. 82801EB ICH5 IDE (rev 02) (prog-if 8a [Master SecP PriP]) Subsystem: Hewlett-Packard Company: Unknown device 12bf Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin A routed to IRQ 5 Region 0: I/O ports at <ignored> Region 1: I/O ports at <ignored> Region 2: I/O ports at <ignored> Region 3: I/O ports at <ignored> Region 4: I/O ports at 24c0 [size=16] Region 5: Memory at 40000000 (32-bit, non-prefetchable) [size=1K] 00: 86 80 db 24 07 00 88 02 02 8a 01 01 00 00 00 00 10: e1 24 00 00 01 28 00 00 e9 24 00 00 05 28 00 00 20: c1 24 00 00 00 00 00 40 00 00 00 00 3c 10 bf 12 30: 00 00 00 00 00 00 00 00 00 00 00 00 05 01 00 00 00:1f.2 IDE interface: Intel Corp.: Unknown device 24d1 (rev 02) (prog-if 8f [Master SecP SecO PriP PriO]) Subsystem: Hewlett-Packard Company: Unknown device 12bf Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin A routed to IRQ 5 Region 0: I/O ports at 24f0 [size=8] Region 1: I/O ports at 2808 [size=4] Region 2: I/O ports at 24f8 [size=8] Region 3: I/O ports at 280c [size=4] Region 4: I/O ports at 24d0 [size=16] 00: 86 80 d1 24 05 00 a0 02 02 8f 01 01 00 00 00 00 10: f1 24 00 00 09 28 00 00 f9 24 00 00 0d 28 00 00 20: d1 24 00 00 00 00 00 00 00 00 00 00 3c 10 bf 12 30: 00 00 00 00 00 00 00 00 00 00 00 00 05 01 00 00 00:1f.5 Multimedia audio controller: Intel Corp. 82801EB AC'97 Audio (rev 02) Subsystem: Hewlett-Packard Company: Unknown device 12bf Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin B routed to IRQ 5 Region 0: I/O ports at 2000 [size=256] Region 1: I/O ports at 2400 [size=64] Region 2: Memory at f8500400 (32-bit, non-prefetchable) [size=512] Region 3: Memory at f8500600 (32-bit, non-prefetchable) [size=256] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00: 86 80 d5 24 07 00 90 02 02 00 01 04 00 00 00 00 10: 01 20 00 00 01 24 00 00 00 04 50 f8 00 06 50 f8 20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 bf 12 30: 00 00 00 00 50 00 00 00 00 00 00 00 05 02 00 00 05:02.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5782 Gigabit Ethernet (rev 03) Subsystem: Hewlett-Packard Company: Unknown device 12bf Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 (16000ns min), cache line size 10 Interrupt: pin A routed to IRQ 5 Region 0: Memory at f8400000 (64-bit, non-prefetchable) [size=64K] Capabilities: [48] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=1 PME- Capabilities: [50] Vital Product Data Capabilities: [58] Message Signalled Interrupts: 64bit+ Queue=0/3 Enable- Address: ffffbff6ffffbbbc Data: b7ff 00: e4 14 96 16 06 01 b0 02 03 00 00 02 10 40 00 00 10: 04 00 40 f8 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 07 00 00 00 3c 10 bf 12 30: 00 00 f4 fb 48 00 00 00 00 00 00 00 05 01 40 00 05:04.0 VGA compatible controller: ATI Technologies Inc Radeon VE QY (prog-if 00 [VGA]) Subsystem: Appian Technology: Unknown device a320 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR+ FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 66 (2000ns min), cache line size 10 Interrupt: pin A routed to IRQ 10 Region 0: Memory at e0000000 (32-bit, prefetchable) [size=128M] Region 1: I/O ports at 1000 [size=256] Region 2: Memory at f8410000 (32-bit, non-prefetchable) [size=64K] Expansion ROM at <unassigned> [disabled] [size=128K] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00: 02 10 59 51 87 01 90 02 00 00 00 03 10 42 00 00 10: 08 00 00 e0 01 10 00 00 00 00 41 f8 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 97 10 20 a3 30: 00 00 00 00 50 00 00 00 00 00 00 00 0a 01 08 00 05:0a.0 Display controller: ATI Technologies Inc Radeon VE QY Subsystem: Appian Technology: Unknown device a320 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR+ FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 66 (2000ns min), cache line size 10 Interrupt: pin A routed to IRQ 11 Region 0: Memory at e8000000 (32-bit, prefetchable) [size=128M] Region 1: I/O ports at 1400 [size=256] Region 2: Memory at f8420000 (32-bit, non-prefetchable) [size=64K] Expansion ROM at <unassigned> [disabled] [size=128K] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00: 02 10 59 51 87 01 90 02 00 00 80 03 10 42 00 00 10: 08 00 00 e8 01 14 00 00 00 00 42 f8 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 97 10 20 a3 30: 00 00 00 00 50 00 00 00 00 00 00 00 0b 01 08 00 05:0d.0 Display controller: ATI Technologies Inc Radeon VE QY Subsystem: Appian Technology: Unknown device a320 Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR+ FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 66 (2000ns min), cache line size 10 Interrupt: pin A routed to IRQ 0 Region 0: Memory at 48000000 (32-bit, prefetchable) [disabled] [size=128M] Region 1: I/O ports at 1800 [disabled] [size=256] Region 2: Memory at 40010000 (32-bit, non-prefetchable) [disabled] [size=64K] Expansion ROM at <unassigned> [disabled] [size=128K] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00: 02 10 59 51 84 01 90 02 00 00 80 03 10 42 00 00 10: 08 00 00 48 01 18 00 00 00 00 01 40 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 97 10 20 a3 30: 00 00 00 00 50 00 00 00 00 00 00 00 ff 01 08 00 # ## XFree86.0.log ### ########################################################################## XFree86 Version 4.3.0 (Red Hat Linux release: 4.3.0-2) Release Date: 27 February 2003 X Protocol Version 11, Revision 0, Release 6.6 Build Operating System: Linux 2.4.20-3bigmem i686 [ELF] Build Date: 27 February 2003 Build Host: porky.devel.redhat.com Before reporting problems, check http://www.XFree86.Org/ to make sure that you have the latest version. Module Loader present OS Kernel: Linux version 2.4.20-8 (bhcompile@xxxxxxxxxxxxxxxxxxxxxx) (gcc version 3.2.2 20030222 (Red Hat Linux 3.2.2-5)) #1 Thu Mar 13 17:54:28 EST 2003 Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/XFree86.0.log", Time: Thu Nov 6 13:22:28 2003 (++) Using config file: "/etc/X11/XF86Config" (==) ServerLayout "Default Layout" (**) |-->Screen "Screen2" (0) (**) | |-->Monitor "Eizo Flexscan T57S" (**) | |-->Device "Videocard2" (**) |-->Screen "Screen1" (1) (**) | |-->Monitor "Eizo Flexscan F77" (**) | |-->Device "Videocard1" (**) |-->Screen "Screen0" (2) (**) | |-->Monitor "Eizo Flexscan T57S" (**) | |-->Device "Videocard0" (**) |-->Input Device "Mouse0" (**) |-->Input Device "Keyboard0" (**) Option "XkbRules" "xfree86" (**) XKB: rules: "xfree86" (**) Option "XkbModel" "pc105" (**) XKB: model: "pc105" (**) Option "XkbLayout" "us" (**) XKB: layout: "us" (==) Keyboard: CustomKeycode disabled (**) FontPath set to "unix/:7100" (**) RgbPath set to "/usr/X11R6/lib/X11/rgb" (==) ModulePath set to "/usr/X11R6/lib/modules" (--) using VT number 5 (WW) Open APM failed (/dev/apm_bios) (No such device) (II) Module ABI versions: XFree86 ANSI C Emulation: 0.2 XFree86 Video Driver: 0.6 XFree86 XInput driver : 0.4 XFree86 Server Extension : 0.2 XFree86 Font Renderer : 0.4 (II) Loader running on linux (II) LoadModule: "bitmap" (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a (II) Module bitmap: vendor="The XFree86 Project" compiled for 4.3.0, module version = 1.0.0 Module class: XFree86 Font Renderer ABI class: XFree86 Font Renderer, version 0.4 (II) Loading font Bitmap (II) LoadModule: "pcidata" (II) Loading /usr/X11R6/lib/modules/libpcidata.a (II) Module pcidata: vendor="The XFree86 Project" compiled for 4.3.0, module version = 1.0.0 ABI class: XFree86 Video Driver, version 0.6 (II) PCI: Probing config type using method 1 (II) PCI: Config type is 1 (II) PCI: stages = 0x03, oldVal1 = 0x00000000, mode1Res1 = 0x80000000 (II) PCI: PCI scan (all values are in hex) (II) PCI: 00:00:0: chip 8086,2578 card 103c,12bf rev 02 class 06,00,00 hdr 00 (II) PCI: 00:01:0: chip 8086,2579 card 0000,0000 rev 02 class 06,04,00 hdr 01 (II) PCI: 00:1d:0: chip 8086,24d2 card 103c,12bf rev 02 class 0c,03,00 hdr 80 (II) PCI: 00:1d:1: chip 8086,24d4 card 103c,12bf rev 02 class 0c,03,00 hdr 00 (II) PCI: 00:1d:2: chip 8086,24d7 card 103c,12bf rev 02 class 0c,03,00 hdr 00 (II) PCI: 00:1d:7: chip 8086,24dd card 103c,12bf rev 02 class 0c,03,20 hdr 00 (II) PCI: 00:1e:0: chip 8086,244e card 0000,0000 rev c2 class 06,04,00 hdr 01 (II) PCI: 00:1f:0: chip 8086,24d0 card 0000,0000 rev 02 class 06,01,00 hdr 80 (II) PCI: 00:1f:1: chip 8086,24db card 103c,12bf rev 02 class 01,01,8a hdr 00 (II) PCI: 00:1f:2: chip 8086,24d1 card 103c,12bf rev 02 class 01,01,8f hdr 00 (II) PCI: 00:1f:5: chip 8086,24d5 card 103c,12bf rev 02 class 04,01,00 hdr 00 (II) PCI: 05:02:0: chip 14e4,1696 card 103c,12bf rev 03 class 02,00,00 hdr 00 (II) PCI: 05:04:0: chip 1002,5159 card 1097,a320 rev 00 class 03,00,00 hdr 00 (II) PCI: 05:0a:0: chip 1002,5159 card 1097,a320 rev 00 class 03,80,00 hdr 00 (II) PCI: 05:0d:0: chip 1002,5159 card 1097,a320 rev 00 class 03,80,00 hdr 00 (II) PCI: End of PCI scan (II) Host-to-PCI bridge: (II) Bus 0: bridge is at (0:0:0), (0,0,5), BCTRL: 0x0008 (VGA_EN is set) (II) Bus 0 I/O range: [0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B] (II) Bus 0 non-prefetchable memory range: [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B] (II) Bus 0 prefetchable memory range: [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B] (II) PCI-to-PCI bridge: (II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x0004 (VGA_EN is cleared) (II) PCI-to-PCI bridge: (II) Bus 5: bridge is at (0:30:0), (0,5,5), BCTRL: 0x000a (VGA_EN is set) (II) Bus 5 I/O range: [0] -1 0 0x00001000 - 0x00001fff (0x1000) IX[B] (II) Bus 5 non-prefetchable memory range: [0] -1 0 0xf8200000 - 0xf84fffff (0x300000) MX[B] (II) Bus 5 prefetchable memory range: [0] -1 0 0xe0000000 - 0xf81fffff (0x18200000) MX[B] (II) PCI-to-ISA bridge: (II) Bus -1: bridge is at (0:31:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set) (--) PCI:*(5:4:0) ATI Technologies Inc Radeon RV100 QY [Radeon 7000/VE] rev 0, Mem @ 0xe0000000/27, 0xf8410000/16, I/O @ 0x1000/8 (--) PCI: (5:10:0) ATI Technologies Inc Radeon RV100 QY [Radeon 7000/VE] rev 0, Mem @ 0xe8000000/27, 0xf8420000/16, I/O @ 0x1400/8 (--) PCI: (5:13:0) ATI Technologies Inc Radeon RV100 QY [Radeon 7000/VE] rev 0, Mem @ 0x48000000/27, 0x40010000/16, I/O @ 0x1800/8 (II) Addressable bus resource ranges are [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B] [1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B] (II) OS-reported resource ranges: [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] (II) PCI Memory resource overlap reduced 0xd8000000 from 0xdfffffff to 0xd7ffffff (II) Active PCI resource ranges: [0] -1 0 0xf8500600 - 0xf85006ff (0x100) MX[B] [1] -1 0 0xf8500400 - 0xf85005ff (0x200) MX[B] [2] -1 0 0x40000000 - 0x400003ff (0x400) MX[B] [3] -1 0 0xf8500000 - 0xf85003ff (0x400) MX[B] [4] -1 0 0xd8000000 - 0xd7ffffff (0x0) MX[B]O [5] -1 0 0xf8420000 - 0xf842ffff (0x10000) MX[B](B) [6] -1 0 0xe8000000 - 0xefffffff (0x8000000) MX[B](B) [7] -1 0 0xf8410000 - 0xf841ffff (0x10000) MX[B](B) [8] -1 0 0xe0000000 - 0xe7ffffff (0x8000000) MX[B](B) [9] -1 0 0x00002400 - 0x0000243f (0x40) IX[B] [10] -1 0 0x00002000 - 0x000020ff (0x100) IX[B] [11] -1 0 0x000024d0 - 0x000024df (0x10) IX[B] [12] -1 0 0x0000280c - 0x0000280f (0x4) IX[B] [13] -1 0 0x000024f8 - 0x000024ff (0x8) IX[B] [14] -1 0 0x00002808 - 0x0000280b (0x4) IX[B] [15] -1 0 0x000024f0 - 0x000024f7 (0x8) IX[B] [16] -1 0 0x000024c0 - 0x000024cf (0x10) IX[B] [17] -1 0 0x00002804 - 0x00002804 (0x1) IX[B] [18] -1 0 0x000024e8 - 0x000024e8 (0x1) IX[B] [19] -1 0 0x00002800 - 0x00002800 (0x1) IX[B] [20] -1 0 0x000024e0 - 0x000024e0 (0x1) IX[B] [21] -1 0 0x00002480 - 0x0000249f (0x20) IX[B] [22] -1 0 0x00002460 - 0x0000247f (0x20) IX[B] [23] -1 0 0x00002440 - 0x0000245f (0x20) IX[B] [24] -1 0 0x00001400 - 0x000014ff (0x100) IX[B](B) [25] -1 0 0x00001000 - 0x000010ff (0x100) IX[B](B) (II) Inactive PCI resource ranges: [0] -1 0 0x40010000 - 0x4001ffff (0x10000) MX[B](B) [1] -1 0 0x48000000 - 0x4fffffff (0x8000000) MX[B](B) [2] -1 0 0x00001800 - 0x000018ff (0x100) IX[B](B) (II) Active PCI resource ranges after removing overlaps: [0] -1 0 0xf8500600 - 0xf85006ff (0x100) MX[B] [1] -1 0 0xf8500400 - 0xf85005ff (0x200) MX[B] [2] -1 0 0x40000000 - 0x400003ff (0x400) MX[B] [3] -1 0 0xf8500000 - 0xf85003ff (0x400) MX[B] [4] -1 0 0xd8000000 - 0xd7ffffff (0x0) MX[B]O [5] -1 0 0xf8420000 - 0xf842ffff (0x10000) MX[B](B) [6] -1 0 0xe8000000 - 0xefffffff (0x8000000) MX[B](B) [7] -1 0 0xf8410000 - 0xf841ffff (0x10000) MX[B](B) [8] -1 0 0xe0000000 - 0xe7ffffff (0x8000000) MX[B](B) [9] -1 0 0x00002400 - 0x0000243f (0x40) IX[B] [10] -1 0 0x00002000 - 0x000020ff (0x100) IX[B] [11] -1 0 0x000024d0 - 0x000024df (0x10) IX[B] [12] -1 0 0x0000280c - 0x0000280f (0x4) IX[B] [13] -1 0 0x000024f8 - 0x000024ff (0x8) IX[B] [14] -1 0 0x00002808 - 0x0000280b (0x4) IX[B] [15] -1 0 0x000024f0 - 0x000024f7 (0x8) IX[B] [16] -1 0 0x000024c0 - 0x000024cf (0x10) IX[B] [17] -1 0 0x00002804 - 0x00002804 (0x1) IX[B] [18] -1 0 0x000024e8 - 0x000024e8 (0x1) IX[B] [19] -1 0 0x00002800 - 0x00002800 (0x1) IX[B] [20] -1 0 0x000024e0 - 0x000024e0 (0x1) IX[B] [21] -1 0 0x00002480 - 0x0000249f (0x20) IX[B] [22] -1 0 0x00002460 - 0x0000247f (0x20) IX[B] [23] -1 0 0x00002440 - 0x0000245f (0x20) IX[B] [24] -1 0 0x00001400 - 0x000014ff (0x100) IX[B](B) [25] -1 0 0x00001000 - 0x000010ff (0x100) IX[B](B) (II) Inactive PCI resource ranges after removing overlaps: [0] -1 0 0x40010000 - 0x4001ffff (0x10000) MX[B](B) [1] -1 0 0x48000000 - 0x4fffffff (0x8000000) MX[B](B) [2] -1 0 0x00001800 - 0x000018ff (0x100) IX[B](B) (II) OS-reported resource ranges after removing overlaps with PCI: [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] (II) All system resource ranges: [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [5] -1 0 0xf8500600 - 0xf85006ff (0x100) MX[B] [6] -1 0 0xf8500400 - 0xf85005ff (0x200) MX[B] [7] -1 0 0x40000000 - 0x400003ff (0x400) MX[B] [8] -1 0 0xf8500000 - 0xf85003ff (0x400) MX[B] [9] -1 0 0xd8000000 - 0xd7ffffff (0x0) MX[B]O [10] -1 0 0xf8420000 - 0xf842ffff (0x10000) MX[B](B) [11] -1 0 0xe8000000 - 0xefffffff (0x8000000) MX[B](B) [12] -1 0 0xf8410000 - 0xf841ffff (0x10000) MX[B](B) [13] -1 0 0xe0000000 - 0xe7ffffff (0x8000000) MX[B](B) [14] -1 0 0x40010000 - 0x4001ffff (0x10000) MX[B](B) [15] -1 0 0x48000000 - 0x4fffffff (0x8000000) MX[B](B) [16] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [17] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [18] -1 0 0x00002400 - 0x0000243f (0x40) IX[B] [19] -1 0 0x00002000 - 0x000020ff (0x100) IX[B] [20] -1 0 0x000024d0 - 0x000024df (0x10) IX[B] [21] -1 0 0x0000280c - 0x0000280f (0x4) IX[B] [22] -1 0 0x000024f8 - 0x000024ff (0x8) IX[B] [23] -1 0 0x00002808 - 0x0000280b (0x4) IX[B] [24] -1 0 0x000024f0 - 0x000024f7 (0x8) IX[B] [25] -1 0 0x000024c0 - 0x000024cf (0x10) IX[B] [26] -1 0 0x00002804 - 0x00002804 (0x1) IX[B] [27] -1 0 0x000024e8 - 0x000024e8 (0x1) IX[B] [28] -1 0 0x00002800 - 0x00002800 (0x1) IX[B] [29] -1 0 0x000024e0 - 0x000024e0 (0x1) IX[B] [30] -1 0 0x00002480 - 0x0000249f (0x20) IX[B] [31] -1 0 0x00002460 - 0x0000247f (0x20) IX[B] [32] -1 0 0x00002440 - 0x0000245f (0x20) IX[B] [33] -1 0 0x00001400 - 0x000014ff (0x100) IX[B](B) [34] -1 0 0x00001000 - 0x000010ff (0x100) IX[B](B) [35] -1 0 0x00001800 - 0x000018ff (0x100) IX[B](B) (II) LoadModule: "ddc" (II) Loading /usr/X11R6/lib/modules/libddc.a (II) Module ddc: vendor="The XFree86 Project" compiled for 4.3.0, module version = 1.0.0 ABI class: XFree86 Video Driver, version 0.6 (II) LoadModule: "dbe" (II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a (II) Module dbe: vendor="The XFree86 Project" compiled for 4.3.0, module version = 1.0.0 Module class: XFree86 Server Extension ABI class: XFree86 Server Extension, version 0.2 (II) Loading extension DOUBLE-BUFFER (II) LoadModule: "extmod" (II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a (II) Module extmod: vendor="The XFree86 Project" compiled for 4.3.0, module version = 1.0.0 Module class: XFree86 Server Extension ABI class: XFree86 Server Extension, version 0.2 (II) Loading extension SHAPE (II) Loading extension MIT-SUNDRY-NONSTANDARD (II) Loading extension BIG-REQUESTS (II) Loading extension SYNC (II) Loading extension MIT-SCREEN-SAVER (II) Loading extension XC-MISC (II) Loading extension XFree86-VidModeExtension (II) Loading extension XFree86-Misc (II) Loading extension XFree86-DGA (II) Loading extension DPMS (II) Loading extension FontCache (II) Loading extension TOG-CUP (II) Loading extension Extended-Visual-Information (II) Loading extension XVideo (II) Loading extension XVideo-MotionCompensation (II) Loading extension X-Resource (II) LoadModule: "fbdevhw" (II) Loading /usr/X11R6/lib/modules/linux/libfbdevhw.a (II) Module fbdevhw: vendor="The XFree86 Project" compiled for 4.3.0, module version = 0.0.2 ABI class: XFree86 Video Driver, version 0.6 (II) LoadModule: "radeon" (II) Loading /usr/X11R6/lib/modules/drivers/radeon_drv.o (II) Module radeon: vendor="The XFree86 Project" compiled for 4.3.0, module version = 4.0.1 Module class: XFree86 Video Driver ABI class: XFree86 Video Driver, version 0.6 (II) LoadModule: "ati" (II) Loading /usr/X11R6/lib/modules/drivers/ati_drv.o (II) Module ati: vendor="The XFree86 Project" compiled for 4.3.0, module version = 6.4.18 Module class: XFree86 Video Driver ABI class: XFree86 Video Driver, version 0.6 (II) LoadModule: "mouse" (II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o (II) Module mouse: vendor="The XFree86 Project" compiled for 4.3.0, module version = 1.0.0 Module class: XFree86 XInput Driver ABI class: XFree86 XInput driver, version 0.4 (II) ATI: ATI driver (version 6.4.18) for chipsets: ati, ativga (II) R128: Driver for ATI Rage 128 chipsets: ATI Rage 128 Mobility M3 LE (PCI), ATI Rage 128 Mobility M3 LF (AGP), ATI Rage 128 Mobility M4 MF (AGP), ATI Rage 128 Mobility M4 ML (AGP), ATI Rage 128 Pro GL PA (AGP?), ATI Rage 128 Pro GL PB (AGP?), ATI Rage 128 Pro GL PC (AGP?), ATI Rage 128 Pro GL PD (PCI), ATI Rage 128 Pro GL PE (AGP?), ATI Rage 128 Pro GL PF (AGP), ATI Rage 128 Pro VR PG (AGP?), ATI Rage 128 Pro VR PH (AGP?), ATI Rage 128 Pro VR PI (AGP?), ATI Rage 128 Pro VR PJ (AGP?), ATI Rage 128 Pro VR PK (AGP?), ATI Rage 128 Pro VR PL (AGP?), ATI Rage 128 Pro VR PM (AGP?), ATI Rage 128 Pro VR PN (AGP?), ATI Rage 128 Pro VR PO (AGP?), ATI Rage 128 Pro VR PP (PCI), ATI Rage 128 Pro VR PQ (AGP?), ATI Rage 128 Pro VR PR (PCI), ATI Rage 128 Pro VR PS (AGP?), ATI Rage 128 Pro VR PT (AGP?), ATI Rage 128 Pro VR PU (AGP?), ATI Rage 128 Pro VR PV (AGP?), ATI Rage 128 Pro VR PW (AGP?), ATI Rage 128 Pro VR PX (AGP?), ATI Rage 128 GL RE (PCI), ATI Rage 128 GL RF (AGP), ATI Rage 128 RG (AGP), ATI Rage 128 VR RK (PCI), ATI Rage 128 VR RL (AGP), ATI Rage 128 4X SE (AGP?), ATI Rage 128 4X SF (AGP?), ATI Rage 128 4X SG (AGP?), ATI Rage 128 4X SH (AGP?), ATI Rage 128 4X SK (AGP?), ATI Rage 128 4X SL (AGP?), ATI Rage 128 4X SM (AGP), ATI Rage 128 4X SN (AGP?), ATI Rage 128 Pro ULTRA TF (AGP), ATI Rage 128 Pro ULTRA TL (AGP), ATI Rage 128 Pro ULTRA TR (AGP), ATI Rage 128 Pro ULTRA TS (AGP?), ATI Rage 128 Pro ULTRA TT (AGP?), ATI Rage 128 Pro ULTRA TU (AGP?) (II) RADEON: Driver for ATI Radeon chipsets: ATI Radeon QD (AGP), ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP), ATI Radeon VE/7000 QY (AGP), ATI Radeon VE/7000 QZ (AGP), ATI Radeon Mobility M7 LW (AGP), ATI Mobility FireGL 7800 M7 LX (AGP), ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP), ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QI (AGP), ATI Radeon 8500 QJ (AGP), ATI Radeon 8500 QK (AGP), ATI Radeon 8500 QL (AGP), ATI Radeon 9100 QM (AGP), ATI Radeon 8500 QN (AGP), ATI Radeon 8500 QO (AGP), ATI Radeon 8500 Qh (AGP), ATI Radeon 8500 Qi (AGP), ATI Radeon 8500 Qj (AGP), ATI Radeon 8500 Qk (AGP), ATI Radeon 8500 Ql (AGP), ATI Radeon 8500 BB (AGP), ATI Radeon 7500 QW (AGP), ATI Radeon 7500 QX (AGP), ATI Radeon 9000 Id (AGP), ATI Radeon 9000 Ie (AGP), ATI Radeon 9000 If (AGP), ATI Radeon 9000 Ig (AGP), ATI Radeon Mobility M9 Ld (AGP), ATI Radeon Mobility M9 Le (AGP), ATI Radeon Mobility M9 Lf (AGP), ATI Radeon Mobility M9 Lg (AGP), ATI Radeon 9500 AD (AGP), ATI Radeon 9500 AE (AGP), ATI Radeon 9500 AF (AGP), ATI FireGL Z1/X1 AG (AGP), ATI Radeon 9700 Pro ND (AGP), ATI Radeon 9700/9500Pro NE (AGP), ATI Radeon 9700 NF (AGP), ATI FireGL X1 NG (AGP) (II) Primary Device is: PCI 05:04:0 (WW) RADEON: No matching Device section for instance (BusID PCI:5:13:0) found (--) Chipset ATI Radeon VE/7000 QY (AGP) found (--) Chipset ATI Radeon VE/7000 QY (AGP) found (--) Chipset ATI Radeon VE/7000 QY (AGP) found (II) resource ranges after xf86ClaimFixedResources() call: [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [5] -1 0 0xf8500600 - 0xf85006ff (0x100) MX[B] [6] -1 0 0xf8500400 - 0xf85005ff (0x200) MX[B] [7] -1 0 0x40000000 - 0x400003ff (0x400) MX[B] [8] -1 0 0xf8500000 - 0xf85003ff (0x400) MX[B] [9] -1 0 0xd8000000 - 0xd7ffffff (0x0) MX[B]O [10] -1 0 0xf8420000 - 0xf842ffff (0x10000) MX[B](B) [11] -1 0 0xe8000000 - 0xefffffff (0x8000000) MX[B](B) [12] -1 0 0xf8410000 - 0xf841ffff (0x10000) MX[B](B) [13] -1 0 0xe0000000 - 0xe7ffffff (0x8000000) MX[B](B) [14] -1 0 0x40010000 - 0x4001ffff (0x10000) MX[B](B) [15] -1 0 0x48000000 - 0x4fffffff (0x8000000) MX[B](B) [16] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [17] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [18] -1 0 0x00002400 - 0x0000243f (0x40) IX[B] [19] -1 0 0x00002000 - 0x000020ff (0x100) IX[B] [20] -1 0 0x000024d0 - 0x000024df (0x10) IX[B] [21] -1 0 0x0000280c - 0x0000280f (0x4) IX[B] [22] -1 0 0x000024f8 - 0x000024ff (0x8) IX[B] [23] -1 0 0x00002808 - 0x0000280b (0x4) IX[B] [24] -1 0 0x000024f0 - 0x000024f7 (0x8) IX[B] [25] -1 0 0x000024c0 - 0x000024cf (0x10) IX[B] [26] -1 0 0x00002804 - 0x00002804 (0x1) IX[B] [27] -1 0 0x000024e8 - 0x000024e8 (0x1) IX[B] [28] -1 0 0x00002800 - 0x00002800 (0x1) IX[B] [29] -1 0 0x000024e0 - 0x000024e0 (0x1) IX[B] [30] -1 0 0x00002480 - 0x0000249f (0x20) IX[B] [31] -1 0 0x00002460 - 0x0000247f (0x20) IX[B] [32] -1 0 0x00002440 - 0x0000245f (0x20) IX[B] [33] -1 0 0x00001400 - 0x000014ff (0x100) IX[B](B) [34] -1 0 0x00001000 - 0x000010ff (0x100) IX[B](B) [35] -1 0 0x00001800 - 0x000018ff (0x100) IX[B](B) (II) Loading sub module "radeon" (II) LoadModule: "radeon" (II) Reloading /usr/X11R6/lib/modules/drivers/radeon_drv.o (II) resource ranges after xf86ClaimFixedResources() call: [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [5] -1 0 0xf8500600 - 0xf85006ff (0x100) MX[B] [6] -1 0 0xf8500400 - 0xf85005ff (0x200) MX[B] [7] -1 0 0x40000000 - 0x400003ff (0x400) MX[B] [8] -1 0 0xf8500000 - 0xf85003ff (0x400) MX[B] [9] -1 0 0xd8000000 - 0xd7ffffff (0x0) MX[B]O [10] -1 0 0xf8420000 - 0xf842ffff (0x10000) MX[B](B) [11] -1 0 0xe8000000 - 0xefffffff (0x8000000) MX[B](B) [12] -1 0 0xf8410000 - 0xf841ffff (0x10000) MX[B](B) [13] -1 0 0xe0000000 - 0xe7ffffff (0x8000000) MX[B](B) [14] -1 0 0x40010000 - 0x4001ffff (0x10000) MX[B](B) [15] -1 0 0x48000000 - 0x4fffffff (0x8000000) MX[B](B) [16] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [17] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [18] -1 0 0x00002400 - 0x0000243f (0x40) IX[B] [19] -1 0 0x00002000 - 0x000020ff (0x100) IX[B] [20] -1 0 0x000024d0 - 0x000024df (0x10) IX[B] [21] -1 0 0x0000280c - 0x0000280f (0x4) IX[B] [22] -1 0 0x000024f8 - 0x000024ff (0x8) IX[B] [23] -1 0 0x00002808 - 0x0000280b (0x4) IX[B] [24] -1 0 0x000024f0 - 0x000024f7 (0x8) IX[B] [25] -1 0 0x000024c0 - 0x000024cf (0x10) IX[B] [26] -1 0 0x00002804 - 0x00002804 (0x1) IX[B] [27] -1 0 0x000024e8 - 0x000024e8 (0x1) IX[B] [28] -1 0 0x00002800 - 0x00002800 (0x1) IX[B] [29] -1 0 0x000024e0 - 0x000024e0 (0x1) IX[B] [30] -1 0 0x00002480 - 0x0000249f (0x20) IX[B] [31] -1 0 0x00002460 - 0x0000247f (0x20) IX[B] [32] -1 0 0x00002440 - 0x0000245f (0x20) IX[B] [33] -1 0 0x00001400 - 0x000014ff (0x100) IX[B](B) [34] -1 0 0x00001000 - 0x000010ff (0x100) IX[B](B) [35] -1 0 0x00001800 - 0x000018ff (0x100) IX[B](B) (II) Loading sub module "radeon" (II) LoadModule: "radeon" (II) Reloading /usr/X11R6/lib/modules/drivers/radeon_drv.o *** If unresolved symbols were reported above, they might not *** be the reason for the server aborting. Fatal server error: Caught signal 11. Server aborting When reporting a problem related to a server crash, please send the full server output, not just the last messages. This can be found in the log file "/var/log/XFree86.0.log". Please report problems to xfree86@xxxxxxxxxxxx # ## XF86config ### ########################################################################## # XFree86 4 configuration created by redhat-config-xfree86 Section "ServerLayout" Identifier "Default Layout" Screen "Screen2" Screen "Screen1" Screen "Screen0" # Screen 0 "Screen0" 0 0 # Screen 1 "Screen1" RightOf "Screen0" # Screen 2 "Screen2" RightOf "Screen1" # Screen 3 "Screen3" RightOf "Screen2" # Screen 4 "Screen4" RightOf "Screen3" # Screen 5 "Screen5" RightOf "Screen4" # Screen 6 "Screen6" RightOf "Screen5" # Screen 7 "Screen7" RightOf "Screen6" InputDevice "Mouse0" "CorePointer" InputDevice "Keyboard0" "CoreKeyboard" EndSection Section "Files" # RgbPath is the location of the RGB database. Note, this is the name of the # file minus the extension (like ".txt" or ".db"). There is normally # no need to change the default. # Multiple FontPath entries are allowed (they are concatenated together) # By default, Red Hat 6.0 and later now use a font server independent of # the X server to render fonts. RgbPath "/usr/X11R6/lib/X11/rgb" FontPath "unix/:7100" EndSection Section "Module" Load "ddc" Load "dbe" Load "extmod" Load "fbdevhw" # Load "glx" # Load "record" # Load "freetype" # Load "type1" EndSection Section "InputDevice" # Specify which keyboard LEDs can be user-controlled (eg, with xset(1)) # Option "Xleds" "1 2 3" # To disable the XKEYBOARD extension, uncomment XkbDisable. # Option "XkbDisable" # To customise the XKB settings to suit your keyboard, modify the # lines below (which are the defaults). For example, for a non-U.S. # keyboard, you will probably want to use: # Option "XkbModel" "pc102" # If you have a US Microsoft Natural keyboard, you can use: # Option "XkbModel" "microsoft" # # Then to change the language, change the Layout setting. # For example, a german layout can be obtained with: # Option "XkbLayout" "de" # or: # Option "XkbLayout" "de" # Option "XkbVariant" "nodeadkeys" # # If you'd like to switch the positions of your capslock and # control keys, use: # Option "XkbOptions" "ctrl:swapcaps" # Or if you just want both to be control, use: # Option "XkbOptions" "ctrl:nocaps" # Identifier "Keyboard0" Driver "keyboard" Option "XkbRules" "xfree86" Option "XkbModel" "pc105" Option "XkbLayout" "us" EndSection Section "InputDevice" Identifier "Mouse0" Driver "mouse" Option "Protocol" "PS/2" Option "Device" "/dev/psaux" # Option "ZAxisMapping" "4 5" # Option "Emulate3Buttons" "no" EndSection # # Monitor section # ########################################################## Section "Monitor" Identifier "Eizo Flexscan T57S" VendorName "Eizo" ModelName "Flexscan T57S" HorizSync 30.0 - 92.0 VertRefresh 50.0 - 160.0 Option "dpms" EndSection Section "Monitor" Identifier "Eizo Flexscan F77" VendorName "Eizo" ModelName "Flexscan F77" HorizSync 30.0 - 92.0 VertRefresh 50.0 - 160.0 Option "dpms" EndSection # # Device section # ########################################################## Section "Device" Identifier "Videocard0" Screen 0 Driver "radeon" VendorName "Videocard vendor" BoardName "ATI Radeon VE" BusID "05:04:0" Option "NoDDC" EndSection Section "Device" Identifier "Videocard1" Screen 1 Driver "radeon" VendorName "Videocard vendor" BoardName "ATI Radeon VE" BusID "05:04:0" Option "NoDDC" EndSection Section "Device" Identifier "Videocard2" Screen 0 Driver "radeon" VendorName "Videocard vendor" BoardName "ATI Radeon VE" BusID "05:10:0" Option "NoDDC" EndSection Section "Device" Identifier "Videocard3" Screen 1 Driver "radeon" VendorName "Videocard vendor" BoardName "ATI Radeon VE" BusID "05:10:0" Option "NoDDC" EndSection Section "Device" Identifier "Videocard4" Screen 0 Driver "radeon" VendorName "Videocard vendor" BoardName "ATI Radeon VE" BusID "05:13:0" Option "NoDDC" EndSection Section "Device" Identifier "Videocard5" Screen 1 Driver "radeon" VendorName "Videocard vendor" BoardName "ATI Radeon VE" BusID "05:13:0" Option "NoDDC" EndSection # # Screen section # ########################################################## Section "Screen" Identifier "Screen0" Device "Videocard0" Monitor "Eizo Flexscan T57S" DefaultDepth 8 SubSection "Display" Depth 8 Modes "1280x1024" EndSubSection EndSection Section "Screen" Identifier "Screen1" Device "Videocard1" Monitor "Eizo Flexscan F77" DefaultDepth 8 SubSection "Display" Depth 8 Modes "1280x1024" EndSubSection EndSection Section "Screen" Identifier "Screen2" Device "Videocard2" Monitor "Eizo Flexscan T57S" DefaultDepth 8 SubSection "Display" Depth 8 Modes "1280x1024" EndSubSection EndSection Section "Screen" Identifier "Screen3" Device "Videocard3" Monitor "Eizo Flexscan T57S" DefaultDepth 8 SubSection "Display" Depth 8 Modes "1280x1024" EndSubSection EndSection Section "Screen" Identifier "Screen4" Device "Videocard4" Monitor "Eizo Flexscan T57S" DefaultDepth 8 SubSection "Display" Depth 8 Modes "1280x1024" EndSubSection EndSection Section "Screen" Identifier "Screen5" Device "Videocard5" Monitor "Eizo Flexscan T57S" DefaultDepth 8 SubSection "Display" Depth 8 Modes "1280x1024" EndSubSection EndSection Section "DRI" Group 0 Mode 0666 EndSection # ## Original mail ### ########################################################################## >-- Oorspronkelijk bericht -- >From: Alex Deucher <agd5f@xxxxxxxxx> >Subject: [XFree86] Multiple Dualhead card problem ATI Radeon VE / Appian >Typhoon 64 >To: xfree86@xxxxxxxxxxx >Reply-To: xfree86@xxxxxxxxxxx >Date: Thu, 6 Nov 2003 07:28:48 -0800 (PST) > > >This may be related to the problem discussed a while back with the posting of seconday radeon cards. Can you send a copy of your xfree86 log and the output of lspci? Alex --------------------------------- Yesterday I installed three Appian >yphoon 64 cards in a system with XFree86 - 4.3.0. The Appian has an ATI Radeon VE on it. The first strange thing is that both displays of the first graphical card show the same from startup where I would expect only the first monitor to show t >e boot sequence etc. Second I tried to create 6 seperate display. Then the Server crashes. Adding the Load "ddc" Module resolved next messages: Symbol xf86SetDDCproperties from module /usr/X11R6/lib/modules/drivers/radeon_drv.o is unresolved! > But still the server crashes. Attached are the /etc?X11/XF86config file and the /var/log/XFree86.0.log file. Just using Screen0 and screen1 and thus only the first graphical card works. Has anyone an idea what the problem is. Regards, > Marcel Stegehuis __________________________________ Do you Yahoo!? Protect your identity with Yahoo! Mail AddressGuard http://antispam.yahoo.com/whatsnewfree _______________________________________________ XFree86 mailing list XFree86@XFree8 >.Org http://XFree86.Org/mailman/listinfo/xfree86 _______________________________________________ XFree86 mailing list XFree86@xxxxxxxxxxx http://XFree86.Org/mailman/listinfo/xfree86
