On Wed, 29 Oct 2003, Colin Hyatt Bortner wrote: > Mark, > > Whoo-hoo! Thanks for your help, Mark. Everything seems to be working > wonderfully. I seem to be experiencing more ghosting using my > desktop, however, than when I hooked up the same LCD to my laptop. If > anyone has any ideas about why that could be, I would love to hear them. > It's not really an issue though. Ghosting with DVI? Never heard of that. At least not in the sense that CRTs ghost. Mark. > > Thanks again for all the help! > > Colin > cbortner@xxxxxxxxxxxxxxxxxx > > On Wed, 29 Oct 2003, Mark Vojkovich wrote: > > > On Wed, 29 Oct 2003, Colin Hyatt Bortner wrote: > > > > > Mark, > > > > > > It's great to hear that I should be able to get the nv driver working! > > > I've made a big step of progress, I can now start up X well enough using > > > the nv driver, but I can't seem to be able to get a resolution higher than > > > 1024x786. Ideally, I would like to be able to use 1280x1024, the > > > monitor's native resolution. > > > > > > I've posted the relevant files online, as I didn't know if the list server > > > stripped attachments, and I didn't want to put the contents in the body > > > of the message. > > > > > > So, here they are: > > > > > > http://chb.orangekids.net/XFree86.0.log > > > http://chb.orangekids.net/XF86Config > > > > > > Thanks in advance for any advice! > > > > It says: > > > > (II) NV(0): Not using default mode "1280x1024" (hsync out of range) > > > > The XF86Config file says your monitor's specs are: > > > > (II) NV(0): Samsung SyncMaster 172T: Using hsync range of 30.00-63.00 kHz > > (II) NV(0): Samsung SyncMaster 172T: Using vrefresh range of 56.00-75.00 Hz > > > > but the VESA, 1280x1024 mode that the server would try to use has a > > 64 kHz hsync. This would imply that a monitor with those specs > > can't do that mode. It seems the correct specs are not entered > > into the XF86Config. On samsung's web page: > > > > http://www.samsung.com/Products/Monitor/LCDMonitor/Monitor_LCDMonitor_172T_sp.htm > > > > The hsync range is listed as 30-81 > > The vsync range is listed as 56-75 > > > > Which would have no problem with 1280x1024. Update the HorizSync > > entry in the XF86Config file. > > > > > > Mark. > > > > > > > > Colin > > > cbortner@xxxxxxxxxxxxxxxxxx > > > > > > On Tue, 28 Oct 2003, Mark Vojkovich wrote: > > > > > > > > > > > We can't support NVIDIA's binary drivers but we can support the > > > > "nv" driver. The "nv" driver in 4.3.0 should work fine with DVI on > > > > GeForce3 Ti500. The CrtcNumber option isn't used on the GeForce3 > > > > as that option is only for dual-head cards. I'll need to see > > > > the /var/log/XFree86.0.log when running the "nv" driver to diagnose > > > > why it's not working. > > > > > > > > > > > > Mark. > > > > > > > > > > > > On Tue, 28 Oct 2003, Colin Hyatt Bortner wrote: > > > > > > > > > Hello, > > > > > > > > > > I've been having problems with my new monitor, a Samsung SyncMaster 172T, > > > > > on the DVI output of my nVidia GeForce 3 Ti500 with xfree86 4.3.0. The > > > > > monitor has duel inputs, analog and digital, but I'd like to, if > > > > > possible, use the DVI input. > > > > > > > > > > It functions adequately using the vesa driver, limited to 1024x786. I'd > > > > > like to be able to use nVidia's binary driver, nvidia, or at least the > > > > > nv driver. > > > > > > > > > > When I try to use the nv driver, the screen will go blank and flash > > > > > slightly, eventually the led on the LCD will begin to flash, and I have to > > > > > press Ctrl+Alt+BackSpace to drop out of X. Similar behavior is observed > > > > > using the nvidia driver. > > > > > > > > > > I've been looking around for advice, including this list's archives, and > > > > > have integrated that advice into my XFree86Config file. I've attached it, > > > > > with the added/modified lines highlighted. None of them have seemed to > > > > > made an impact on this particular problem however. > > > > > > > > > > On the Samsung website, the horizontal sync range for 'digital' is 30-63 > > > > > and the vertical sync range is 56-75. > > > > > > > > > > >>SNIP>> > > > > > > > > > > Section "Module" > > > > > Load "dbe" > > > > > SubSection "extmod" > > > > > Option "omit xfree86-dga" > > > > > EndSubSection > > > > > Load "type1" > > > > > Load "speedo" > > > > > Load "glx" > > > > > EndSection > > > > > Section "Files" > > > > > RgbPath "/usr/X11R6/lib/X11/rgb" > > > > > FontPath "/usr/X11R6/lib/X11/fonts/local/" > > > > > FontPath "/usr/X11R6/lib/X11/fonts/misc/" > > > > > FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled" > > > > > FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled" > > > > > FontPath "/usr/X11R6/lib/X11/fonts/Speedo/" > > > > > FontPath "/usr/X11R6/lib/X11/fonts/Type1/" > > > > > FontPath "/usr/X11R6/lib/X11/fonts/75dpi/" > > > > > FontPath "/usr/X11R6/lib/X11/fonts/100dpi/" > > > > > EndSection > > > > > Section "ServerFlags" > > > > > EndSection > > > > > Section "InputDevice" > > > > > Identifier "Keyboard1" > > > > > Driver "Keyboard" > > > > > Option "AutoRepeat" "500 30" > > > > > Option "XkbRules" "xfree86" > > > > > Option "XkbModel" "pc101" > > > > > Option "XkbLayout" "us" > > > > > EndSection > > > > > Section "InputDevice" > > > > > Identifier "Mouse1" > > > > > Driver "mouse" > > > > > Option "Protocol" "IMPS/2" > > > > > Option "Device" "/dev/input/mice" > > > > > Option "ZAxisMapping" "4 5" > > > > > EndSection > > > > > Section "Monitor" > > > > > Identifier "Samsung SyncMaster 172T" > > > > > HorizSync 30-63 > > > > > VertRefresh 56-75 > > > > > EndSection > > > > > Section "Device" > > > > > Identifier "Standard VGA" > > > > > VendorName "Unknown" > > > > > BoardName "Unknown" > > > > > Driver "vga" > > > > > EndSection > > > > > Section "Device" > > > > > Identifier "nVidia GeForce 3 Ti500" > > > > > Driver "nvidia" > > > > > Option "FlatPanel" <-- ADDED > > > > > Option "CrtcNumber" "1" <-- ADDED > > > > > EndSection > > > > > Section "Screen" > > > > > Identifier "Screen 1" > > > > > Device "nVidia GeForce 3 Ti500" > > > > > Monitor "Samsung SyncMaster 172T" > > > > > DefaultDepth 24 > > > > > Subsection "Display" > > > > > Depth 8 > > > > > Modes "1024x768" "800x600" "640x480" > > > > > ViewPort 0 0 > > > > > EndSubsection > > > > > Subsection "Display" > > > > > Depth 16 > > > > > Modes "1024x768" "800x600" "640x480" > > > > > ViewPort 0 0 > > > > > EndSubsection > > > > > Subsection "Display" > > > > > Depth 24 > > > > > Modes "1280x1024" "1024x768" "800x600" "640x480" > > > > > ViewPort 0 0 > > > > > EndSubsection > > > > > EndSection > > > > > Section "ServerLayout" > > > > > Identifier "Simple Layout" > > > > > Screen "Screen 1" > > > > > InputDevice "Mouse1" "CorePointer" > > > > > InputDevice "Keyboard1" "CoreKeyboard" > > > > > EndSection > > > > > > > > > > <<SNIP<< > > > > > > > > > > If the log would also be helpful, I will gladly send that as well. > > > > > > > > > > Thank you very much! > > > > > > > > > > Regards, > > > > > > > > > > Colin > > > > > cbortner@xxxxxxxxxxxxxxxxxx > > > > > _______________________________________________ > > > > > XFree86 mailing list > > > > > XFree86@xxxxxxxxxxx > > > > > http://XFree86.Org/mailman/listinfo/xfree86 > > > > > > > > > > > > > _______________________________________________ > > > > XFree86 mailing list > > > > XFree86@xxxxxxxxxxx > > > > http://XFree86.Org/mailman/listinfo/xfree86 > > > > > > > _______________________________________________ > > > XFree86 mailing list > > > XFree86@xxxxxxxxxxx > > > http://XFree86.Org/mailman/listinfo/xfree86 > > > > > > > _______________________________________________ > > XFree86 mailing list > > XFree86@xxxxxxxxxxx > > http://XFree86.Org/mailman/listinfo/xfree86 > > > _______________________________________________ > XFree86 mailing list > XFree86@xxxxxxxxxxx > http://XFree86.Org/mailman/listinfo/xfree86 > _______________________________________________ XFree86 mailing list XFree86@xxxxxxxxxxx http://XFree86.Org/mailman/listinfo/xfree86
