Re: [XFree86] nVidia 1.0-4496 driver Vs XFree86 4.3.0-2

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



   NVIDIA's drivers replace XFree86's libGL and GLX module.  You
need to uninstall NVIDIA's drivers to get OpenGL working with the
"nv" driver.  Or at least restore XFree86's OpenGL libraries and GLX 
module.  For GLX it's merely a matter of removing NVIDIA's
/usr/X11R6/lib/modules/extensions/libglx.so.  XFree86's is the libglx.a
and the .so takes preference over the .a.  For the OpenGL libraries
you need to remove NVIDIA's which are in /usr/lib and reinstate
XFree86's which are in /usr/X11/lib (with symlinks from /usr/lib).


			Mark.




On Mon, 27 Oct 2003, Michael wrote:

> Hello:
> 
> I have installed nVidia driver 1.0-4496 on my system, with Redhat 9.0 kernel 
> 2.4.20-6 and XFree86 4.3.0-2, for an ASUS V9560VS (nVidia FX5600) card.
> 
> The driver was installed to nVidia's README, by-the-book.  All requisite 
> libraries now appear in their designated locations.  
> 
> XF86Config changed from Driver "nv" to Driver "nvidia", added Load "glx", and 
> removed Load "dri" and Load "GLcore".
> 
> Video quality is excellent., the X server works fine, GUI desktop appears, 
> and glxgears displays graphic at 3200fps.  OpenOffice fails to start with a 
> terse Segmentation fault error on the command-line terminal.
> 
> XF86Config changed from Driver "nvidia" to Driver "nv".   Now, OppenOffice 
> starts and funtions properly.  However, glxgears fails with the following 
> command-line terminal message: 
> xlib extension: "GLX" missing on display ":00".
> Error: couldn't get an RGB Double-buffered visual
> 
> According to nVidias README, their driver was built to XFree86 4.0.2 
> compatibility.  Also was told that their glx code addresses segments in a 
> manner that differs from the method in standard code.  
> 
> Does anyone have a solution, so that the nVidia FX5600 card driver does 
> provide OpenGL functionality with X 4.3.0-2 interoperability?
> 
> OS:  Redhat 9.0 / kernel 2.4.20-6 / XFree86 4.3.0-2 
> CPU:  Intel P4 / 2.60cGHz / 800MHz system bus
> Board:  Intel D865 PERLK / 1GB PC3200 DDR Memory
> Discs:  WD 120MB UATA 100 Hard drive / Sony CDRW 52-24-52
> Sound:  Creative Audigy 2
> Graphics:  ASUS V9560VS - 128MB 8xAGP, 
>   using nVidia FX5600 and nVidia driver 1.0-4496
> 
> 
> Cheers and thanks in advance, 
> Michael  - Graphics & Engineering  http://www.bowlvisions.com/
> 
> _______________________________________________
> XFree86 mailing list
> XFree86@xxxxxxxxxxx
> http://XFree86.Org/mailman/listinfo/xfree86
> 

_______________________________________________
XFree86 mailing list
XFree86@xxxxxxxxxxx
http://XFree86.Org/mailman/listinfo/xfree86

[Index of Archives]     [X Forum]     [Xorg]     [XFree86 Newbie]     [IETF Announce]     [Security]     [Font Config]     [Bugtraq]     [Yosemite]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux Kernel]

  Powered by Linux