> Nice to know that!
>
> Could you let me know what version of Linux , and (especially) XFree86
> are you running?
The details:
Kernel: 2.4.22, vanilla (not benh branch)
XFree86: 4.3.99.14 (cvs from a couple of days ago)
/proc/pci entry:
VGA compatible controller: PCI device 10de:0329 (nVidia Corporation) (rev 161).
IRQ 48.
Master Capable. Latency=248. Min Gnt=5.Max Lat=1.
Non-prefetchable 32 bit memory at 0x91000000 [0x91ffffff].
Prefetchable 32 bit memory at 0xa0000000 [0xa7ffffff].
lspci entry:
00:10.0 VGA compatible controller: nVidia Corporation: Unknown device 0329 (rev a1)
XF86Config (edited):
Section "ServerFlags"
AllowMouseOpenFail
Option "PCI type" "UniNorth"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Unknown"
HorizSync 30.0-100.0
VertRefresh 50-160
# 12" PowerBook G4
# 1024x768 @ 76 Hz, 62.5 kHz hsync
Modeline "1024x768" 85 1024 1032 1152 1360 768 784 787 823
EndSection
Section "Device"
Identifier "NV"
Driver "nv"
EndSection
XFree startup, edited:
This is a pre-release version of XFree86, and is not supported in any
way. Bugs may be reported to XFree86@xxxxxxxxxxx and patches submitted
to fixes@xxxxxxxxxxxx Before reporting bugs in pre-release versions,
please check the latest version in the XFree86 CVS repository
(http://www.XFree86.Org/cvs).
XFree86 Version 4.3.99.14
Release Date: 10 October 2003
X Protocol Version 11, Revision 0, Release 6.6
Build Operating System: Linux 2.4.22 ppc [ELF]
Current Operating System: Linux shiny 2.4.22 #4 Fri Oct 24 23:14:22 PDT 2003 ppc
Build Date: 24 October 2003
Changelog Date: 24 October 2003
Before reporting problems, check http://www.XFree86.Org/
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/XFree86.0.log", Time: Sat Oct 25 09:07:27 2003
(==) Using config file: "/etc/X11/XF86Config-4"
(==) ServerLayout "XFree86 Configured"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "NV"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="The XFree86 Project"
compiled for 4.3.99.14, module version = 1.0.0
(--) using VT number 7
(--) PCI:*(0:16:0) nVidia Corporation unknown chipset (0x0329) rev 161, Mem @ 0x91000000/24, 0xa0000000/27, BIOS @ 0x90000000/17
(II) Loading /usr/X11R6/lib/modules/drivers/nv_drv.o
(II) Module nv: vendor="The XFree86 Project"
compiled for 4.3.99.14, module version = 1.0.1
(II) NV: driver for NVIDIA chipsets: RIVA 128, RIVA TNT, RIVA TNT2,
Unknown TNT2, Vanta, RIVA TNT2 Ultra, RIVA TNT2 Model 64,
Aladdin TNT2, GeForce 256, GeForce DDR, Quadro, GeForce2 MX/MX 400,
GeForce2 MX 100/200, GeForce2 Go, Quadro2 MXR/EX/Go,
GeForce2 Integrated GPU, GeForce2 GTS, GeForce2 Ti, GeForce2 Ultra,
Quadro2 Pro, GeForce4 MX 460, GeForce4 MX 440, GeForce4 MX 420,
GeForce4 MX 440-SE, GeForce4 440 Go, GeForce4 420 Go,
GeForce4 420 Go 32M, GeForce4 460 Go, GeForce4 440 Go 64M,
GeForce4 410 Go 16M, Quadro4 500 GoGL, Quadro4 550 XGL, Quadro4 NVS,
GeForce4 MX 440 with AGP8X, GeForce4 MX 440SE with AGP8X,
GeForce4 MX 420 with AGP8X, GeForce4 448 Go, GeForce4 488 Go,
Quadro4 580 XGL, Quadro4 280 NVS, Quadro4 380 XGL,
GeForce4 MX Integrated GPU, GeForce3, GeForce3 Ti 200,
GeForce3 Ti 500, Quadro DCC, GeForce4 Ti 4600, GeForce4 Ti 4400,
0x0252, GeForce4 Ti 4200, Quadro4 900 XGL, Quadro4 750 XGL,
Quadro4 700 XGL, GeForce4 Ti 4800, GeForce4 Ti 4200 with AGP8X,
GeForce4 Ti 4800 SE, GeForce4 4200 Go, Quadro4 700 GoGL,
Quadro4 980 XGL, Quadro4 780 XGL, GeForce FX 5800 Ultra,
GeForce FX 5800, Quadro FX 2000, Quadro FX 1000,
GeForce FX 5600 Ultra, GeForce FX 5600, 0x0313, GeForce FX 5600SE,
0x0316, 0x0317, GeForce FX Go5600, GeForce FX Go5650,
Quadro FX Go700, 0x031D, 0x031E, 0x031F, GeForce FX 5200 Ultra,
GeForce FX 5200, GeForce FX 5200SE, GeForce FX Go5200,
GeForce FX Go5250, GeForce FX Go5200 32M/64M, 0x0329, 0x032A,
Quadro FX 500, GeForce FX Go5300, GeForce FX Go5100, 0x032F,
GeForce FX 5900 Ultra, GeForce FX 5900, 0x0332,
GeForce FX 5950 Ultra, 0x0334, Quadro FX 3000, 0x0341, 0x0342,
0x0343, 0x0347, 0x0348, 0x0349, 0x034B, 0x034C, 0x034E, 0x034F
(--) Assigning device section with no busID to primary device
(--) Chipset 0x0329 found
(--) NV(0): Chipset: "0x0329"
(**) NV(0): Depth 24, (--) framebuffer bpp 32
(==) NV(0): RGB weight 888
(==) NV(0): Default visual is TrueColor
(II) Loading /usr/X11R6/lib/modules/libvgahw.a
(II) Module vgahw: vendor="The XFree86 Project"
compiled for 4.3.99.14, module version = 0.1.0
(==) NV(0): Using HW cursor
(--) NV(0): Linear framebuffer at 0xA0000000
(--) NV(0): MMIO registers at 0x91000000
(II) Loading /usr/X11R6/lib/modules/libi2c.a
(II) Module i2c: vendor="The XFree86 Project"
compiled for 4.3.99.14, module version = 1.2.0
(II) NV(0): I2C bus "DDC" initialized.
(II) NV(0): Probing for analog device on output A...
(--) NV(0): ...can't find one
(II) NV(0): Probing for analog device on output B...
(--) NV(0): ...can't find one
(II) NV(0): Probing for EDID on I2C bus A...
(II) NV(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) NV(0): I2C device "DDC:ddc2" removed.
(II) NV(0): ... none found
(II) NV(0): Probing for EDID on I2C bus B...
(II) NV(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) NV(0): I2C device "DDC:ddc2" removed.
(II) NV(0): ... none found
(--) NV(0): CRTC 1 is currently programmed for DFP
(II) NV(0): Using DFP on CRTC 1
(--) NV(0): Panel size is 1024 x 768
(--) NV(0): VideoRAM: 32768 kBytes
(==) NV(0): Using gamma correction (1.0, 1.0, 1.0)
(II) NV(0): Monitor0: Using hsync range of 30.00-100.00 kHz
(II) NV(0): Monitor0: Using vrefresh range of 50.00-160.00 Hz
(II) NV(0): Clock range: 12.00 to 350.00 MHz
(II) NV(0): Not using default mode "320x175" (bad mode clock/interlace/doublescan)
(--) NV(0): Virtual size is 1024x768 (pitch 1024)
(**) NV(0): *Mode "1024x768": 85.0 MHz, 62.5 kHz, 75.9 Hz
(==) NV(0): DPI set to (75, 75)
(II) Loading /usr/X11R6/lib/modules/libxaa.a
(II) Module xaa: vendor="The XFree86 Project"
compiled for 4.3.99.14, module version = 1.1.0
(II) Loading /usr/X11R6/lib/modules/libramdac.a
(II) Module ramdac: vendor="The XFree86 Project"
compiled for 4.3.99.14, module version = 0.1.0
(--) Depth 24 pixmap format is 32 bpp
(II) NV(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
Indirect CPU to Screen color expansion
Solid Lines
Scanline Image Writes
Offscreen Pixmaps
Setting up tile and stipple cache:
32 128x128 slots
32 256x256 slots
16 512x512 slots
(==) NV(0): Backing store disabled
(==) NV(0): Silken mouse enabled
(==) RandR enabled
_______________________________________________
XFree86 mailing list
XFree86@xxxxxxxxxxx
http://XFree86.Org/mailman/listinfo/xfree86
