In SaX2, select any 3DLabs chipset but add this to the Device Section. BusID "PCI:0:16:1" Alan. On Wed, Oct 08, 2003 at 02:12:52PM -0500, rick.hill@xxxxxxxxxxxx wrote: > I have encountered the same problem after installing SuSE Linux 8.2 > Professional on a Dell Workstation 400 (PII, 300MHz) with an Elsa GLoria XL > graphics card. > > The pertinent details of XFree86.0.0.log: > > PCI:*(0:16:0) unknown vendor (0x1048) unknown chipset (0x8901) rev22 > PCI: (0:16:1) 3DLabs GLINT Delta rev 1 > PCI: (0:16:2) 3DLabs GLINT MX rev 1 > > I tried all of the following graphics cards in SaX2 with no luck: > > 3DLabs > -- 3DExtreme > -- Permedia 4 > -- Permedia II 2D+3D > -- R4 > > S3 > -- Integrated Trio3D > > Re: [XFree86] RE: Elsa Gloria XL Card > > From: Alan Hourihane > Subject: Re: [XFree86] RE: Elsa Gloria XL Card > Date: Fri, 27 Jun 2003 11:09:45 -0700 > > On Sat, Jun 28, 2003 at 04:02:41AM +1000, Chris wrote: > > Dear XFree86 team, > > > > I have a Compaq Deskpro AP400 with a Elsa Gloria XL card in it, I have > > tried many things to try to get it to work but have been unsuccessful so > > far, has anyone had this experience before? > > What have you tried ? > > Check the log file in /var/log/XFree86.0.log for any errors. > > Alan. > > > > _______________________________________________ > XFree86 mailing list > XFree86@xxxxxxxxxxx > http://XFree86.Org/mailman/listinfo/xfree86 _______________________________________________ XFree86 mailing list XFree86@xxxxxxxxxxx http://XFree86.Org/mailman/listinfo/xfree86
