|
Hello: Could you help me with this trouble. I can’t start X console with the startx command in Red Hat Advanced Server running in virtual machine (VMware WorkStation 4.0.5) . I have installed VMware tools, but not start anyway. The message error is attach to this mail. Thanks for all. Martín Ríos
|
[root@VIRTUAL root]# startx
XFree86 Version 4.1.0 (Red Hat Linux release: 4.1.0-29) / X Window System
(protocol Version 11, revision 0, vendor release 6510)
Release Date: 2 June 2001
If the server is older than 6-12 months, or if your card is
newer than the above date, look for a newer version before
reporting problems. (See http://www.XFree86.Org/FAQ)
Build Operating System: Linux 2.4.9-31smp i686 [ELF]
Build Host: stripples.devel.redhat.com
Module Loader present
(==) Log file: "/var/log/XFree86.0.log", Time: Wed Oct 15 05:29:15 2003
(==) Using config file: "/etc/X11/XF86Config-4"
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) ServerLayout "Simple Layout"
(**) |-->Screen "Screen 1" (0)
(**) | |-->Monitor "vmware"
(**) | |-->Device "VMware SVGA"
(**) |-->Input Device "Mouse1"
(**) |-->Input Device "Keyboard1"
(WW) Option "XkbCompat" requires an string value
(**) XKB: rules: "xfree86"
(**) XKB: model: "pc104"
(**) XKB: layout: "us"
(**) FontPath set to "/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/75dpi/:unscaled,/usr/X11R6/lib/X11/fonts/100dpi/:unscaled,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/"
(**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(==) ModulePath set to "/usr/X11R6/lib/modules"
(--) using VT number 7
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 0.1.0
(II) Loading /usr/X11R6/lib/modules/libscanpci.a
(II) Module scanpci: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 0.1.0
(II) Unloading /usr/X11R6/lib/modules/libscanpci.a
(--) PCI:*(0:15:0) VMware PCI SVGA (FIFO) rev 0, Mem @ 0xfa000000/24, 0xf9000000/24, I/O @ 0x10e0/4
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
(II) Module type1: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.a
(II) Module freetype: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.1.9
(II) Loading /usr/X11R6/lib/modules/drivers/vmware_drv.o
(II) Module vmware: vendor="The XFree86 Project"
compiled for 4.0.2, module version = 10.4.0
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
(II) VMWARE: driver for VMware SVGA: vmware0405, vmware0710
(--) VMware Guest X Server 10.4.0 - build=
(--) Assigning device section with no busID to primary device
(--) Chipset vmware0405 found
(--) VMWARE(0): VMware SVGA regs at (0x10e0, 0x10e1)
(II) Loading /usr/X11R6/lib/modules/libvgahw.a
(II) Module vgahw: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 0.1.0
(==) VMWARE(0): Depth 24, (==) framebuffer bpp 32
(==) VMWARE(0): RGB weight 888
(==) VMWARE(0): Default visual is TrueColor
(==) VMWARE(0): Using HW cursor
(==) VMWARE(0): Using gamma correction (1.0, 1.0, 1.0)
(II) VMWARE(0): vmware: Using hsync range of 1.00-10000.00 kHz
(II) VMWARE(0): vmware: Using vrefresh range of 1.00-10000.00 Hz
(II) VMWARE(0): Clock range: 0.00 to 400000.00 MHz
(II) VMWARE(0): Not using mode "2364x1773" (width requires unsupported line pitch)
(--) VMWARE(0): Virtual size is 800x600 (pitch 800)
(**) VMWARE(0): Mode "800x600": 100.0 MHz, 90.9 kHz, 101.0 Hz
(==) VMWARE(0): DPI set to (75, 75)
(II) Loading /usr/X11R6/lib/modules/libcfb32.a
(II) Module cfb32: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/libcfb.a
(II) Module cfb: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/libmfb.a
(II) Module mfb: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/libxaa.a
(II) Module xaa: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
Symbol cfb24ScreenInit from module /usr/X11R6/lib/modules/drivers/vmware_drv.o is unresolved!
Symbol cfb24CopyPlane from module /usr/X11R6/lib/modules/drivers/vmware_drv.o is unresolved!
Symbol cfb16ScreenInit from module /usr/X11R6/lib/modules/drivers/vmware_drv.o is unresolved!
Symbol cfb16CopyPlane from module /usr/X11R6/lib/modules/drivers/vmware_drv.o is unresolved!
(--) Depth 24 pixmap format is 32 bpp
(WW) VMWARE(0): Failed to set up write-combining range (0xfa000000,0x1000000)
(**) Mouse1: Protocol: "IMPS/2"
(**) Mouse1: Core Pointer
(EE) xf86OpenSerial: Cannot open device /dev/mouse
No such device.
(EE) Mouse1: cannot open input device
(EE) PreInit failed for input device "Mouse1"
(II) Keyboard "Keyboard1" handled by legacy driver
(WW) No core pointer registered
No core pointer
Fatal server error:
failed to initialize core devices
When reporting a problem related to a server crash, please send
the full server output, not just the last messages.
This can be found in the log file "/var/log/XFree86.0.log".
Please report problems to xfree86@xxxxxxxxxxxx
XIO: fatal IO error 104 (Connection reset by peer) on X server ":0.0"
after 0 requests (0 known processed) with 0 events remaining.
[root@VIRTUAL root]#
