On Thu, Oct 09, 2003 at 06:55:40PM +0200, Thomas Schwarzkopf wrote:
>Hello,
>
>I try to run XFree86 on my Alpha PC 164 box.
>SRM Console V5.5-1, OS is FreeBSD-4.9-RC1,
>my graphics card is a Matrox Millennium II, 8MB.
>I installed XFree86 via ports.
>The card gets recognized as:
>
>pci0: <Matrox MGA Millennium II 2164W graphics accelerator> at 5.0 irq 2
>
>When I try to start X I get an error "No devices detected"
>Here is the output in /var/log/XFree86.0.log:
XFree86 isn't identifying this as the primary video device. Not sure why --
can you send the output of 'scanpci -v'?
This means you need to specify it explicitly in the XF86Config file:
># Device configured by xf86config:
>
>Section "Device"
> Identifier "matrox"
> Driver "mga"
BusID "0:5:0" <-- ADD THIS LINE
> #VideoRam 8192
>VideoRam 8192
> # Insert Clocks lines here if appropriate
>EndSection
David
--
David Dawes X-Oz Technologies
www.XFree86.org/~dawes www.x-oz.com
_______________________________________________
XFree86 mailing list
XFree86@xxxxxxxxxxx
http://XFree86.Org/mailman/listinfo/xfree86
