Hi, That is precisely the part that I am having trouble understanding. How could Xfree possible know that there are 2 heads if I have given it the same BusID, However all the XF86Config examples I have of radeon dual head cards ( 8500, 7500 , and 9000 ) all specify the same busID. When I do scanpci, or pciconf ( this is freebsd ) it only shows the one device under the agp slot ( ie. 01:xx:xx ) that busID being 01:00:0. I even tried using a live linux cd ( linux toolkit business card cd ) so I could use the command lspci, and still it appeared to give me the same results. The example 8500 config I got of the net was from a debian user, and from speaking to other FreeBSD users, they to have had difficulty with this. However I dont beleive it to be a FreeBSD issue, as this is handled by Xfree86. I am not a linux user, so my use of lspci to determine the busid for the second head could be wrong, any suggestions on the best way to use it for this cause? Thanks for the sugestions Any other suggestions appreciated Thanks David > David, > > I looked at your /var/log/XFree86.0.log and saw that only one head was > recognized ! > > Lines: > (--) PCI:*(1:0:0) ATI Technologies Inc Radeon R200 QL [Radeon 8500 LE] rev > 0, > > There should have been another line like > (--) PCI:*(1:4:0) ATI Technologies Inc Radeon R200 QL [Radeon 8500 LE] rev > 0, > > > The problem in your XFree config file is that you have defined two device > that are exactly the same even for the BusID. So how can XFree see the > difference. > > So try to find out why XFree only sees one head ? > > Regards, > > Marcel Stegehuis > > >-- Oorspronkelijk bericht -- > > From: David L <dlodeiro@xxxxxxxxxxxxxxx> > > >To: xfree86@xxxxxxxxxxx > >Reply-To: xfree86@xxxxxxxxxxx > >Subject: [XFree86] Radeon 8500 Dual Head > >Date: Wed, 1 Oct 2003 00:17:14 +1000 > > > > > >Hi , > > Im trying to set up Dual Screen on my FreeBSD 5.1 Release Machine using > a > Hercules Radeon 8500 LE Dual Head ( one VGA and one DVI ) the card has > an > ATI chip. I have had a look at a few configurations of people using the > 7000 > > and I bele > > >ve I did find one with a 8500. However I have not had any luck > > getting it to work. The screen I have connected to the VGA is a CRT with > a > vga plug, and the monitor I have connected to the DVI is an LCD with a vga > > plug, so I am using an adaptor. > > > Does anyone have this sort of setup working, and if so can I get some tips? > > My XF86Config file follows > > Section "ServerLayout" > Identifier "Layout0" > # Screen "Screen1" > Screen "Screen0" 0 0 > Screen "Screen1" Right > > >f "Screen0" > > InputDevice "Mouse0" "CorePointer" > InputDevice "Keyboard0" "CoreKeyboard" > Option "Xinerama" "true" > EndSection > > Section "Files" > RgbPath "/usr/X11R6/lib/X11/rgb" > ModulePath "/usr/X11R6/lib/modules" > FontPat > > > "/usr/X11R6/lib/X11/fonts/misc/" > > FontPath "/usr/X11R6/lib/X11/fonts/Speedo/" > FontPath "/usr/X11R6/lib/X11/fonts/Type1/" > FontPath "/usr/X11R6/lib/X11/fonts/75dpi/" > FontPath "/usr/X11R6/lib/X11/fonts/100dpi/" > FontPat > > > "/usr/X11R6/lib/X11/fonts/CID/" > > EndSection > > Section "Module" > Load "GLcore" > Load "bitmap" > Load "dbe" > Load "ddc" > Load "dri" > Load "extmod" > Load "freetype" > Load "glx" > Load "int10" > Load "record" > Load "xtrap" > Load > > >speedo" > > Load "type1" > EndSection > > Section "DRI" > Mode 0666 > EndSection > > Section "InputDevice" > Identifier "Keyboard0" > Driver "keyboard" > Option "XkbModel" "microsoft" > Option "XkbLayout" "us" > EndSection > > Section "InputDevi > > >e" > > Identifier "Mouse0" > Driver "mouse" > Option "Protocol" "Auto" > Option "Device" "/dev/sysmouse" > Option "Buttons" "7" > Option "ZAxisMapping" "4 5" > EndSection > > Section "Monitor" > Identifier "Monitor0" > VendorName > > >"Apple" > > ModelName "Colorsync" > HorizSync 31.5 - 57.0 > VertRefresh 50.0 - 90.0 > # Option "DPMS" > EndSection > > Section "Monitor" > Identifier "Monitor1" > VendorName "Avixe" > ModelName "Avixe" > HorizSync 31.5 - 57.0 > VertRefresh > > > 50.0 - 90.0 > > # Option "DPMS" > EndSection > > Section "Device" > ### Available Driver options are:- > ### Values: <i>: integer, <f>: float, <bool>: "True"/"False", > ### <string>: "String", <freq>: "<f> Hz/kHz/MHz" > ### [arg > > >: arg optional > > #Option "slow_edodram" # [<bool>] > #Option "slow_dram" # [<bool>] > #Option "fast_dram" # [<bool>] > #Option "fpm_vram" # [<bool>] > #Option > > >pci_burst" # [<bool>] > > #Option "fifo_conservative" # [<bool>] > #Option "fifo_moderate" # [<bool>] > #Option "fifo_aggressive" # [<bool>] > #Option "pci_retry" # [<bool>] > > > #Option "NoAccel" # [<bool>] > > #Option "early_ras_precharge" # [<bool>] > #Option "late_ras_precharge" # [<bool>] > #Option "lcd_center" # [<bool>] > #Option "set_lcdclk" > > > # <i> > > #Option "set_mclk" # <freq> > #Option "set_refclk" # <freq> > #Option "show_cache" # [<bool>] > #Option "HWCursor" # [<bool>] > #Option "SWCursor" > > > # [<bool>] > > #Option "ShadowFB" # [<bool>] > #Option "Rotate" # [<str>] > #Option "UseFB" # [<bool>] > #Option "mxcr3afix" # [<bool>] > #Option > > > "XVideo" # [<bool>] > > Identifier "Card0" > Driver "radeon" > VendorName "ATI Technologies Inc" > BoardName "Radeon R200 QL [Radeon 8500 LE]" > BusID "PCI:1:0:0" > Option "AGPMode" "4" > Option "AGPFastWrite" " > > >rue" > > # Option "crt_screen" > Option "CloneDisplay" "4" > Screen 0 > EndSection > > Section "Device" > ### Available Driver options are:- > ### Values: <i>: integer, <f>: float, <bool>: "True"/"False", > ### <string>: "S > > >ring", <freq>: "<f> Hz/kHz/MHz" > > ### [arg]: arg optional > #Option "NoAccel" # [<bool>] > #Option "SWcursor" # [<bool>] > #Option "Dac6Bit" # [<bool>] > #Option "Dac > > >Bit" # [<bool>] > > #Option "ForcePCIMode" # [<bool>] > #Option "CPPIOMode" # [<bool>] > #Option "CPusecTimeout" # <i> > #Option "AGPMode" # <i> > #Option > > > "AGPFastWrite" # [<bool>] > > #Option "AGPSize" # <i> > #Option "RingSize" # <i> > #Option "BufferSize" # <i> > #Option "EnableDepthMoves" # [<bool>] > #Option > > > "EnablePageFlip" # [<bool>] > > #Option "NoBackBuffer" # [<bool>] > #Option "PanelOff" # [<bool>] > #Option "DDCMode" # [<bool>] > #Option "CloneDisplay" # <i> > > > #Option "CloneMode" # [<str>] > > #Option "CloneHSync" # [<str>] > #Option "CloneVRefresh" # [<str>] > #Option "UseFBDev" # [<bool>] > #Option "VideoKey" # > > ><i> > > Identifier "Card1" > Driver "radeon" > VendorName "ATI Technologies Inc" > BoardName "Radeon R200 QL [Radeon 8500 LE]" > BusID "PCI:1:0:0" > Option "AGPMode" "4" > Option "AGPFastWrite" "true" > # Option "crt_screen" > > >Option "CloneDisplay" "4" > > Screen 1 > EndSection > > Section "Screen" > Identifier "Screen0" > Device "Card0" > Monitor "Monitor0" > DefaultDepth 24 > SubSection "Display" > Depth 24 > Modes "1024x768" > Viewport 0 0 > EndS > > >bSection > > EndSection > > Section "Screen" > Identifier "Screen1" > Device "Card1" > Monitor "Monitor1" > DefaultDepth 24 > SubSection "Display" > Depth 24 > Modes "1024x768" > Viewport 0 0 > EndSubSection > EndSection > > Thanks in adva > > >ce > > David > > _______________________________________________ > XFree86 mailing list > XFree86@xxxxxxxxxxx > http://XFree86.Org/mailman/listinfo/xfree86 > > > _______________________________________________ > XFree86 mailing list > XFree86@xxxxxxxxxxx > http://XFree86.Org/mailman/listinfo/xfree86 _______________________________________________ XFree86 mailing list XFree86@xxxxxxxxxxx http://XFree86.Org/mailman/listinfo/xfree86
