Hi ,
Im trying to set up Dual Screen on my FreeBSD 5.1 Release Machine using a
Hercules Radeon 8500 LE Dual Head ( one VGA and one DVI ) the card has an
ATI chip. I have had a look at a few configurations of people using the 7000
and I beleive I did find one with a 8500. However I have not had any luck
getting it to work. The screen I have connected to the VGA is a CRT with a
vga plug, and the monitor I have connected to the DVI is an LCD with a vga
plug, so I am using an adaptor.
Does anyone have this sort of setup working, and if so can I get some tips?
My XF86Config file follows
Section "ServerLayout"
Identifier "Layout0"
# Screen "Screen1"
Screen "Screen0" 0 0
Screen "Screen1" RightOf "Screen0"
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
Option "Xinerama" "true"
EndSection
Section "Files"
RgbPath "/usr/X11R6/lib/X11/rgb"
ModulePath "/usr/X11R6/lib/modules"
FontPath "/usr/X11R6/lib/X11/fonts/misc/"
FontPath "/usr/X11R6/lib/X11/fonts/Speedo/"
FontPath "/usr/X11R6/lib/X11/fonts/Type1/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/"
FontPath "/usr/X11R6/lib/X11/fonts/CID/"
EndSection
Section "Module"
Load "GLcore"
Load "bitmap"
Load "dbe"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "record"
Load "xtrap"
Load "speedo"
Load "type1"
EndSection
Section "DRI"
Mode 0666
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "keyboard"
Option "XkbModel" "microsoft"
Option "XkbLayout" "us"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "Auto"
Option "Device" "/dev/sysmouse"
Option "Buttons" "7"
Option "ZAxisMapping" "4 5"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Apple"
ModelName "Colorsync"
HorizSync 31.5 - 57.0
VertRefresh 50.0 - 90.0
# Option "DPMS"
EndSection
Section "Monitor"
Identifier "Monitor1"
VendorName "Avixe"
ModelName "Avixe"
HorizSync 31.5 - 57.0
VertRefresh 50.0 - 90.0
# Option "DPMS"
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "slow_edodram" # [<bool>]
#Option "slow_dram" # [<bool>]
#Option "fast_dram" # [<bool>]
#Option "fpm_vram" # [<bool>]
#Option "pci_burst" # [<bool>]
#Option "fifo_conservative" # [<bool>]
#Option "fifo_moderate" # [<bool>]
#Option "fifo_aggressive" # [<bool>]
#Option "pci_retry" # [<bool>]
#Option "NoAccel" # [<bool>]
#Option "early_ras_precharge" # [<bool>]
#Option "late_ras_precharge" # [<bool>]
#Option "lcd_center" # [<bool>]
#Option "set_lcdclk" # <i>
#Option "set_mclk" # <freq>
#Option "set_refclk" # <freq>
#Option "show_cache" # [<bool>]
#Option "HWCursor" # [<bool>]
#Option "SWCursor" # [<bool>]
#Option "ShadowFB" # [<bool>]
#Option "Rotate" # [<str>]
#Option "UseFB" # [<bool>]
#Option "mxcr3afix" # [<bool>]
#Option "XVideo" # [<bool>]
Identifier "Card0"
Driver "radeon"
VendorName "ATI Technologies Inc"
BoardName "Radeon R200 QL [Radeon 8500 LE]"
BusID "PCI:1:0:0"
Option "AGPMode" "4"
Option "AGPFastWrite" "true"
# Option "crt_screen"
Option "CloneDisplay" "4"
Screen 0
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "NoAccel" # [<bool>]
#Option "SWcursor" # [<bool>]
#Option "Dac6Bit" # [<bool>]
#Option "Dac8Bit" # [<bool>]
#Option "ForcePCIMode" # [<bool>]
#Option "CPPIOMode" # [<bool>]
#Option "CPusecTimeout" # <i>
#Option "AGPMode" # <i>
#Option "AGPFastWrite" # [<bool>]
#Option "AGPSize" # <i>
#Option "RingSize" # <i>
#Option "BufferSize" # <i>
#Option "EnableDepthMoves" # [<bool>]
#Option "EnablePageFlip" # [<bool>]
#Option "NoBackBuffer" # [<bool>]
#Option "PanelOff" # [<bool>]
#Option "DDCMode" # [<bool>]
#Option "CloneDisplay" # <i>
#Option "CloneMode" # [<str>]
#Option "CloneHSync" # [<str>]
#Option "CloneVRefresh" # [<str>]
#Option "UseFBDev" # [<bool>]
#Option "VideoKey" # <i>
Identifier "Card1"
Driver "radeon"
VendorName "ATI Technologies Inc"
BoardName "Radeon R200 QL [Radeon 8500 LE]"
BusID "PCI:1:0:0"
Option "AGPMode" "4"
Option "AGPFastWrite" "true"
# Option "crt_screen"
Option "CloneDisplay" "4"
Screen 1
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 24
Modes "1024x768"
Viewport 0 0
EndSubSection
EndSection
Section "Screen"
Identifier "Screen1"
Device "Card1"
Monitor "Monitor1"
DefaultDepth 24
SubSection "Display"
Depth 24
Modes "1024x768"
Viewport 0 0
EndSubSection
EndSection
Thanks in advance
David
_______________________________________________
XFree86 mailing list
XFree86@xxxxxxxxxxx
http://XFree86.Org/mailman/listinfo/xfree86
