I've been fighting with this for a day or two now, and I've run out of leads
to fix it. Help pointing me in the right direction would be appreciated.
I have an IBM T40 running FreeBSD 5.1 (stock) with a ports collection from
9/24, as there were apparently some changes to the XFree86 port between 5.1 and
that date (and I wanted to make sure I had the latest patches).
Using X -configure and xf86config generate similar, yet distinctly different
config files. Both have the same problem, however, in that when I start X,
I get either signal 6s, or signal 11s, and it crashes, whether I use XFree86
directly, or run xdm.
I've gone through the log, and made changes to load the modules to get rid
of the missing symbols from the generated config file. At this point, the
only thing that looks odd is the reported screen resolution of 65536x65535,
but can't find a way to over ride it.
I've included my dmesg output from the laptop, so that the hardware I'm
running can be seen. I've also included my XF86Config file, and the log from
a typical run.
Again, a working config or pointers on what to try next would be greatly
appreciated.
-Brian
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.1-RELEASE #2: Sat Sep 20 23:03:44 EDT 2003
root@xxxxxxxxxxxxxx:/usr/src/sys/i386/compile/LAPTOP
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0651000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc065126c.
Timecounter "i8254" frequency 1193182 Hz
Timecounter "TSC" frequency 1495157978 Hz
CPU: Intel(R) Pentium(R) M processor 1500MHz (1495.16-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x695 Stepping = 5
Features=0xa7e9f9bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,TM,PBE>
real memory = 536215552 (511 MB)
avail memory = 513974272 (490 MB)
netsmb_dev: loaded
Pentium Pro MTRR support enabled
VESA: v2.0, 32704k memory, flags:0x1, mode table:0xc05468a2 (1000022)
VESA: ATI MOBILITY RADEON 7500
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <IBM TP-1R > on motherboard
pcibios: BIOS version 2.10
Using $PIR table, 15 entries at 0xc00fdea0
ACPI-1287: *** Error: Method execution failed [\\_SB_.PCI0.LPC_.FDC_._INI] (Node 0xc4065b00), AE_NOT_EXIST
ACPI-1287: *** Error: Method execution failed [\\_SB_.PCI0.LPC_.EC__._INI] (Node 0xc405c1a0), AE_NOT_EXIST
ACPI-1287: *** Error: Method execution failed [\\_SB_.PCI0.LPC_.EC__.BAT0._STA] (Node 0xc405d900), AE_NOT_EXIST
ACPI-0175: *** Error: Method execution failed [\\_SB_.PCI0.LPC_.EC__.BAT0._STA] (Node 0xc405d900), AE_NOT_EXIST
ACPI-1287: *** Error: Method execution failed [\\_SB_.PCI0.LPC_.EC__.BAT1._STA] (Node 0xc405d780), AE_NOT_EXIST
ACPI-0175: *** Error: Method execution failed [\\_SB_.PCI0.LPC_.EC__.BAT1._STA] (Node 0xc405d780), AE_NOT_EXIST
ACPI-1287: *** Error: Method execution failed [\\_SB_.PCI0.LPC_.EC__.BGID] (Node 0xc4065c40), AE_NOT_EXIST
ACPI-1287: *** Error: Method execution failed [\\_SB_.PCI0.LPC_.EC__.BINI] (Node 0xc4065c60), AE_NOT_EXIST
ACPI-1287: *** Error: Method execution failed [\\_SB_.PCI0.LPC_.EC__.BSTA] (Node 0xc4065ca0), AE_NOT_EXIST
ACPI-1287: *** Error: Method execution failed [\\_SB_.PCI0.IDE0.SCND.MSTR._STA] (Node 0xc4065b60), AE_NOT_EXIST
ACPI-0175: *** Error: Method execution failed [\\_SB_.PCI0.IDE0.SCND.MSTR._STA] (Node 0xc4065b60), AE_NOT_EXIST
ACPI-1287: *** Error: Method execution failed [\\_SB_.PCI0.USB7._INI] (Node 0xc40670a0), AE_AML_REGION_LIMIT
acpi0: power button is handled as a fixed feature programming model.
Timecounter "ACPI-fast" frequency 3579545 Hz
ACPI-1287: *** Error: Method execution failed [\\_SB_.PCI0.LPC_.EC__.BAT0._STA] (Node 0xc405d900), AE_NOT_EXIST
ACPI-0175: *** Error: Method execution failed [\\_SB_.PCI0.LPC_.EC__.BAT0._STA] (Node 0xc405d900), AE_NOT_EXIST
ACPI-1287: *** Error: Method execution failed [\\_SB_.PCI0.LPC_.EC__.BAT1._STA] (Node 0xc405d780), AE_NOT_EXIST
ACPI-0175: *** Error: Method execution failed [\\_SB_.PCI0.LPC_.EC__.BAT1._STA] (Node 0xc405d780), AE_NOT_EXIST
ACPI-1287: *** Error: Method execution failed [\\_SB_.PCI0.LPC_.EC__.BGID] (Node 0xc4065c40), AE_NOT_EXIST
ACPI-1287: *** Error: Method execution failed [\\_SB_.PCI0.LPC_.EC__.BINI] (Node 0xc4065c60), AE_NOT_EXIST
ACPI-1287: *** Error: Method execution failed [\\_SB_.PCI0.LPC_.EC__.BSTA] (Node 0xc4065ca0), AE_NOT_EXIST
ACPI-1287: *** Error: Method execution failed [\\_SB_.PCI0.IDE0.SCND.MSTR._STA] (Node 0xc4065b60), AE_NOT_EXIST
ACPI-0175: *** Error: Method execution failed [\\_SB_.PCI0.IDE0.SCND.MSTR._STA] (Node 0xc4065b60), AE_NOT_EXIST
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
acpi_cpu0: <CPU> port 0x530-0x537 on acpi0
acpi_tz0: <thermal zone> port 0x530-0x537 on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
ACPI-1287: *** Error: Method execution failed [\\_SB_.LID_._PSW] (Node 0xc3fb2d00), AE_NOT_EXIST
acpi_button0: <Sleep Button> on acpi0
ACPI-1287: *** Error: Method execution failed [\\_SB_.SLPB._PSW] (Node 0xc3fb2c80), AE_NOT_EXIST
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <Intel Generic host to PCI bridge> mem 0xd0000000-0xdfffffff at device 0.0 on pci0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
drm0: <ATI Radeon LW Mobility 7500 M7> port 0x3000-0x30ff mem 0xc0100000-0xc010ffff,0xe0000000-0xe7ffffff irq 11 at device 0.0 on pci1
info: [drm] AGP at 0xd0000000 256MB
info: [drm] Initialized radeon 1.8.0 20020828 on minor 0
uhci0: <Intel 82801DB (ICH4) USB controller USB-A> port 0x1800-0x181f irq 11 at device 29.0 on pci0
usb0: <Intel 82801DB (ICH4) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801DB (ICH4) USB controller USB-B> port 0x1820-0x183f irq 11 at device 29.1 on pci0
usb1: <Intel 82801DB (ICH4) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801DB (ICH4) USB controller USB-C> port 0x1840-0x185f irq 11 at device 29.2 on pci0
usb2: <Intel 82801DB (ICH4) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
pci0: <serial bus, USB> at device 29.7 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci2: <ACPI PCI bus> on pcib2
cbb0: <TI1520 PCI-CardBus Bridge> mem 0xb0000000-0xb0000fff irq 11 at device 0.0 on pci2
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
cbb1: <TI1520 PCI-CardBus Bridge> mem 0xb1000000-0xb1000fff irq 11 at device 0.1 on pci2
cardbus1: <CardBus bus> on cbb1
pccard1: <16-bit PCCard bus> on cbb1
em0: <Intel(R) PRO/1000 Network Connection, Version - 1.5.31> port 0x8400-0x843f mem 0xc0200000-0xc020ffff,0xc0220000-0xc023ffff irq 11 at device 1.0 on pci2
em0: The EEPROM Checksum Is Not Valid
em0: Unable to initialize the hardware
device_probe_and_attach: em0 attach returned 5
an0: <Cisco Aironet MPI350> port 0x8000-0x80ff mem 0xc0400000-0xc07fffff,0xc0210000-0xc0213fff irq 11 at device 2.0 on pci2
an0: got RSSI <-> dBM map
an0: Ethernet address: 00:02:8a:ab:07:db
an0: supported rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH4 UDMA100 controller> port 0x1860-0x186f,0-0x3,0-0x7,0-0x3,0-0x7 at device 31.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
ichsmb0: <Intel 82801DC (ICH4) SMBus controller> port 0x1880-0x189f irq 11 at device 31.3 on pci0
smbus0: <System Management Bus> on ichsmb0
smb0: <SMBus generic I/O> on smbus0
pcm0: <Intel 82801DB (ICH4)> port 0x18c0-0x18ff,0x1c00-0x1cff mem 0xc0000800-0xc00008ff,0xc0000c00-0xc0000dff irq 11 at device 31.5 on pci0
pcm0: <Analog Devices AD1981B AC97 Codec>
pci0: <simple comms> at device 31.6 (no driver attached)
speaker0 port 0x61 on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
sio1 port 0x2f8-0x2ff irq 3 drq 3 on acpi0
sio1: type 16550A
acpi_ec0: <embedded controller> port 0x66,0x62 on acpi0
acpi_cmbat0: <Control method Battery> on acpi0
acpi_cmbat1: <Control method Battery> on acpi0
acpi_acad0: <AC adapter> on acpi0
pmtimer0 on isa0
orm0: <Option ROMs> at iomem 0xe0000-0xeffff,0xdc000-0xdffff,0xd1000-0xd1fff,0xd0000-0xd0fff,0xc0000-0xcffff on isa0
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x200>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ppc0: parallel port not found.
Timecounters tick every 10.000 msec
ipfw2 initialized, divert enabled, rule-based forwarding enabled, default to accept, logging limited to 100 packets/entry by default
IPv6 packet filtering initialized, default to accept, logging limited to 100 packets/entry
DUMMYNET initialized (011031)
acpi_cpu: throttling enabled, 8 steps (100% to 12.5%), currently 100.0%
system power profile changed to 'economy'
ACPI-0432: *** Error: Handler for [EmbeddedControl] returned AE_ERROR
ACPI-1287: *** Error: Method execution failed [\\_SB_.PCI0.LPC_.EC__.BAT0._STA] (Node 0xc405d900), AE_ERROR
ACPI-0175: *** Error: Method execution failed [\\_SB_.PCI0.LPC_.EC__.BAT0._STA] (Node 0xc405d900), AE_ERROR
ACPI-0432: *** Error: Handler for [EmbeddedControl] returned AE_ERROR
ACPI-1287: *** Error: Method execution failed [\\_SB_.PCI0.LPC_.EC__.BAT1._STA] (Node 0xc405d780), AE_ERROR
ACPI-0175: *** Error: Method execution failed [\\_SB_.PCI0.LPC_.EC__.BAT1._STA] (Node 0xc405d780), AE_ERROR
ACPI-0432: *** Error: Handler for [EmbeddedControl] returned AE_ERROR
ACPI-1287: *** Error: Method execution failed [\\_SB_.PCI0.LPC_.EC__.BAT1._BST] (Node 0xc405d740), AE_ERROR
ACPI-0432: *** Error: Handler for [EmbeddedControl] returned AE_ERROR
ACPI-1287: *** Error: Method execution failed [\\_SB_.PCI0.LPC_.EC__.BAT1._BIF] (Node 0xc405d760), AE_ERROR
ata1-slave: timeout waiting for interrupt
ata1-slave: ATAPI identify failed
ad0: 38154MB <IC25N040ATCS05-0> [77520/16/63] at ata0-master UDMA100
system power profile changed to 'performance'
acd0: CD-RW <UJDA745 DVD/CDRW> at ata1-master PIO4
Mounting root from ufs:/dev/ad0s2a
XFree86 Version 4.3.0
Release Date: 27 February 2003
X Protocol Version 11, Revision 0, Release 6.6
Build Operating System: FreeBSD 5.1 i386 [ELF]
Build Date: 24 September 2003
Before reporting problems, check http://www.XFree86.Org/
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/XFree86.0.log", Time: Fri Sep 26 10:10:47 2003
(==) Using config file: "/etc/X11/XF86Config"
(==) ServerLayout "Simple Layout"
(**) |-->Screen "Screen 1" (0)
(**) | |-->Monitor "My Monitor"
(**) | |-->Device "** ATI Radeon (generic) [radeon]"
(**) |-->Input Device "Mouse1"
(**) |-->Input Device "Keyboard1"
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xfree86"
(**) XKB: rules: "xfree86"
(**) Option "XkbModel" "pc101"
(**) XKB: model: "pc101"
(**) Option "XkbLayout" "us"
(**) XKB: layout: "us"
(==) Keyboard: CustomKeycode disabled
(**) FontPath set to "/usr/X11R6/lib/X11/fonts/local/,/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/75dpi/:unscaled,/usr/X11R6/lib/X11/fonts/100dpi/:unscaled,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/"
(**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(==) ModulePath set to "/usr/X11R6/lib/modules"
(--) Using syscons driver with X support (version 2.0)
(--) using VT number 9
(II) Module ABI versions:
XFree86 ANSI C Emulation: 0.2
XFree86 Video Driver: 0.6
XFree86 XInput driver : 0.4
XFree86 Server Extension : 0.2
XFree86 Font Renderer : 0.4
(II) Loader running on freebsd
(II) LoadModule: "bitmap"
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.6
(II) PCI: Probing config type using method 1
(II) PCI: Config type is 1
(II) PCI: stages = 0x03, oldVal1 = 0x00000000, mode1Res1 = 0x80000000
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 8086,3340 card 1014,0529 rev 03 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 8086,3341 card 0000,0000 rev 03 class 06,04,00 hdr 01
(II) PCI: 00:1d:0: chip 8086,24c2 card 1014,052d rev 01 class 0c,03,00 hdr 80
(II) PCI: 00:1d:1: chip 8086,24c4 card 1014,052d rev 01 class 0c,03,00 hdr 00
(II) PCI: 00:1d:2: chip 8086,24c7 card 1014,052d rev 01 class 0c,03,00 hdr 00
(II) PCI: 00:1d:7: chip 8086,24cd card 1014,052e rev 01 class 0c,03,20 hdr 00
(II) PCI: 00:1e:0: chip 8086,2448 card 0000,0000 rev 81 class 06,04,00 hdr 01
(II) PCI: 00:1f:0: chip 8086,24cc card 0000,0000 rev 01 class 06,01,00 hdr 80
(II) PCI: 00:1f:1: chip 8086,24ca card 1014,052d rev 01 class 01,01,8a hdr 00
(II) PCI: 00:1f:3: chip 8086,24c3 card 1014,052d rev 01 class 0c,05,00 hdr 00
(II) PCI: 00:1f:5: chip 8086,24c5 card 1014,0537 rev 01 class 04,01,00 hdr 00
(II) PCI: 00:1f:6: chip 8086,24c6 card 1014,0524 rev 01 class 07,03,00 hdr 00
(II) PCI: 01:00:0: chip 1002,4c57 card 1014,0530 rev 00 class 03,00,00 hdr 00
(II) PCI: 02:00:0: chip 104c,ac55 card fffc,ffff rev 01 class 06,07,00 hdr 82
(II) PCI: 02:00:1: chip 104c,ac55 card fffc,ffff rev 01 class 06,07,00 hdr 82
(II) PCI: 02:01:0: chip 8086,101e card 1014,0549 rev 03 class 02,00,00 hdr 00
(II) PCI: 02:02:0: chip 14b9,a504 card 14b9,5000 rev 00 class 02,80,00 hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,6), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x000c (VGA_EN is set)
(II) Bus 1 I/O range:
[0] -1 0 0x00003000 - 0x000030ff (0x100) IX[B]
[1] -1 0 0x00003400 - 0x000034ff (0x100) IX[B]
[2] -1 0 0x00003800 - 0x000038ff (0x100) IX[B]
[3] -1 0 0x00003c00 - 0x00003cff (0x100) IX[B]
(II) Bus 1 non-prefetchable memory range:
[0] -1 0 0xc0100000 - 0xc01fffff (0x100000) MX[B]
(II) Bus 1 prefetchable memory range:
[0] -1 0 0xe0000000 - 0xe7ffffff (0x8000000) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 2: bridge is at (0:30:0), (0,2,8), BCTRL: 0x0004 (VGA_EN is cleared)
(II) Bus 2 I/O range:
[0] -1 0 0x00004000 - 0x000040ff (0x100) IX[B]
[1] -1 0 0x00004400 - 0x000044ff (0x100) IX[B]
[2] -1 0 0x00004800 - 0x000048ff (0x100) IX[B]
[3] -1 0 0x00004c00 - 0x00004cff (0x100) IX[B]
[4] -1 0 0x00005000 - 0x000050ff (0x100) IX[B]
[5] -1 0 0x00005400 - 0x000054ff (0x100) IX[B]
[6] -1 0 0x00005800 - 0x000058ff (0x100) IX[B]
[7] -1 0 0x00005c00 - 0x00005cff (0x100) IX[B]
[8] -1 0 0x00006000 - 0x000060ff (0x100) IX[B]
[9] -1 0 0x00006400 - 0x000064ff (0x100) IX[B]
[10] -1 0 0x00006800 - 0x000068ff (0x100) IX[B]
[11] -1 0 0x00006c00 - 0x00006cff (0x100) IX[B]
[12] -1 0 0x00007000 - 0x000070ff (0x100) IX[B]
[13] -1 0 0x00007400 - 0x000074ff (0x100) IX[B]
[14] -1 0 0x00007800 - 0x000078ff (0x100) IX[B]
[15] -1 0 0x00007c00 - 0x00007cff (0x100) IX[B]
[16] -1 0 0x00008000 - 0x000080ff (0x100) IX[B]
[17] -1 0 0x00008400 - 0x000084ff (0x100) IX[B]
[18] -1 0 0x00008800 - 0x000088ff (0x100) IX[B]
[19] -1 0 0x00008c00 - 0x00008cff (0x100) IX[B]
(II) Bus 2 non-prefetchable memory range:
[0] -1 0 0xc0200000 - 0xcfffffff (0xfe00000) MX[B]
(II) Bus 2 prefetchable memory range:
[0] -1 0 0xe8000000 - 0xefffffff (0x8000000) MX[B]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:31:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(II) PCI-to-CardBus bridge:
(II) Bus 3: bridge is at (2:0:0), (2,3,5), BCTRL: 0x0740 (VGA_EN is cleared)
(II) PCI-to-CardBus bridge:
(II) Bus 6: bridge is at (2:0:1), (2,6,8), BCTRL: 0x0740 (VGA_EN is cleared)
(--) PCI:*(1:0:0) ATI Technologies Inc Radeon Mobility M7 LW [Radeon Mobility 7500] rev 0, Mem @ 0xe0000000/27, 0xc0100000/16, I/O @ 0x3000/8
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) PCI Memory resource overlap reduced 0xd0000000 from 0xdfffffff to 0xcfffffff
(II) PCI Memory resource overlap reduced 0xc0000000 from 0xffffffff to 0xc00fffff
(II) Active PCI resource ranges:
[0] -1 0 0xc0400000 - 0xc07fffff (0x400000) MX[B]E
[1] -1 0 0xc0210000 - 0xc021ffff (0x10000) MX[B]E
[2] -1 0 0xc0200000 - 0xc03fffff (0x200000) MX[B]E
[3] -1 0 0xc0220000 - 0xc023ffff (0x20000) MX[B]E
[4] -1 0 0xc0000800 - 0xc0000fff (0x800) MX[B]E
[5] -1 0 0xc0000c00 - 0xc0000fff (0x400) MX[B]E
[6] -1 0 0xc0000000 - 0xc00fffff (0x100000) MX[B]E
[7] -1 0 0xd0000000 - 0xcfffffff (0x0) MX[B]EO
[8] -1 0 0xc0100000 - 0xc010ffff (0x10000) MX[B](B)
[9] -1 0 0xe0000000 - 0xe7ffffff (0x8000000) MX[B](B)
[10] -1 0 0x00008000 - 0x000080ff (0x100) IX[B]E
[11] -1 0 0x00008400 - 0x000084ff (0x100) IX[B]E
[12] -1 0 0x00002000 - 0x000020ff (0x100) IX[B]E
[13] -1 0 0x00002400 - 0x000024ff (0x100) IX[B]E
[14] -1 0 0x000018c0 - 0x000018ff (0x40) IX[B]E
[15] -1 0 0x00001c00 - 0x00001cff (0x100) IX[B]E
[16] -1 0 0x00001880 - 0x000018ff (0x80) IX[B]E
[17] -1 0 0x00001860 - 0x0000187f (0x20) IX[B]E
[18] -1 0 0x00001840 - 0x0000187f (0x40) IX[B]E
[19] -1 0 0x00001820 - 0x0000183f (0x20) IX[B]E
[20] -1 0 0x00001800 - 0x000018ff (0x100) IX[B]E
[21] -1 0 0x00003000 - 0x000030ff (0x100) IX[B](B)
(II) PCI Memory resource overlap reduced 0xc0200000 from 0xc03fffff to 0xc020ffff
(II) PCI Memory resource overlap reduced 0xc0000800 from 0xc0000fff to 0xc0000bff
(II) PCI I/O resource overlap reduced 0x00001880 from 0x000018ff to 0x000018bf
(II) PCI Memory resource overlap reduced 0xc0000000 from 0xc00fffff to 0xc00007ff
(II) PCI I/O resource overlap reduced 0x00001840 from 0x0000187f to 0x0000185f
(II) PCI I/O resource overlap reduced 0x00001800 from 0x000018ff to 0x0000181f
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xc0400000 - 0xc07fffff (0x400000) MX[B]E
[1] -1 0 0xc0210000 - 0xc021ffff (0x10000) MX[B]E
[2] -1 0 0xc0200000 - 0xc020ffff (0x10000) MX[B]E
[3] -1 0 0xc0220000 - 0xc023ffff (0x20000) MX[B]E
[4] -1 0 0xc0000800 - 0xc0000bff (0x400) MX[B]E
[5] -1 0 0xc0000c00 - 0xc0000fff (0x400) MX[B]E
[6] -1 0 0xc0000000 - 0xc00007ff (0x800) MX[B]E
[7] -1 0 0xd0000000 - 0xcfffffff (0x0) MX[B]EO
[8] -1 0 0xc0100000 - 0xc010ffff (0x10000) MX[B](B)
[9] -1 0 0xe0000000 - 0xe7ffffff (0x8000000) MX[B](B)
[10] -1 0 0x00008000 - 0x000080ff (0x100) IX[B]E
[11] -1 0 0x00008400 - 0x000084ff (0x100) IX[B]E
[12] -1 0 0x00002000 - 0x000020ff (0x100) IX[B]E
[13] -1 0 0x00002400 - 0x000024ff (0x100) IX[B]E
[14] -1 0 0x000018c0 - 0x000018ff (0x40) IX[B]E
[15] -1 0 0x00001c00 - 0x00001cff (0x100) IX[B]E
[16] -1 0 0x00001880 - 0x000018bf (0x40) IX[B]E
[17] -1 0 0x00001860 - 0x0000187f (0x20) IX[B]E
[18] -1 0 0x00001840 - 0x0000185f (0x20) IX[B]E
[19] -1 0 0x00001820 - 0x0000183f (0x20) IX[B]E
[20] -1 0 0x00001800 - 0x0000181f (0x20) IX[B]E
[21] -1 0 0x00003000 - 0x000030ff (0x100) IX[B](B)
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xc0400000 - 0xc07fffff (0x400000) MX[B]E
[6] -1 0 0xc0210000 - 0xc021ffff (0x10000) MX[B]E
[7] -1 0 0xc0200000 - 0xc020ffff (0x10000) MX[B]E
[8] -1 0 0xc0220000 - 0xc023ffff (0x20000) MX[B]E
[9] -1 0 0xc0000800 - 0xc0000bff (0x400) MX[B]E
[10] -1 0 0xc0000c00 - 0xc0000fff (0x400) MX[B]E
[11] -1 0 0xc0000000 - 0xc00007ff (0x800) MX[B]E
[12] -1 0 0xd0000000 - 0xcfffffff (0x0) MX[B]EO
[13] -1 0 0xc0100000 - 0xc010ffff (0x10000) MX[B](B)
[14] -1 0 0xe0000000 - 0xe7ffffff (0x8000000) MX[B](B)
[15] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[16] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[17] -1 0 0x00008000 - 0x000080ff (0x100) IX[B]E
[18] -1 0 0x00008400 - 0x000084ff (0x100) IX[B]E
[19] -1 0 0x00002000 - 0x000020ff (0x100) IX[B]E
[20] -1 0 0x00002400 - 0x000024ff (0x100) IX[B]E
[21] -1 0 0x000018c0 - 0x000018ff (0x40) IX[B]E
[22] -1 0 0x00001c00 - 0x00001cff (0x100) IX[B]E
[23] -1 0 0x00001880 - 0x000018bf (0x40) IX[B]E
[24] -1 0 0x00001860 - 0x0000187f (0x20) IX[B]E
[25] -1 0 0x00001840 - 0x0000185f (0x20) IX[B]E
[26] -1 0 0x00001820 - 0x0000183f (0x20) IX[B]E
[27] -1 0 0x00001800 - 0x0000181f (0x20) IX[B]E
[28] -1 0 0x00003000 - 0x000030ff (0x100) IX[B](B)
(II) LoadModule: "dbe"
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension DPMS
(II) Loading extension FontCache
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "type1"
(II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
(II) Module type1: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.2
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font Type1
(II) Loading font CID
(II) LoadModule: "speedo"
(II) Loading /usr/X11R6/lib/modules/fonts/libspeedo.a
(II) Module speedo: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.1
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font Speedo
(II) LoadModule: "freetype"
(II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.a
(II) Module freetype: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 2.0.2
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font FreeType
(II) LoadModule: "xtt"
(II) Loading /usr/X11R6/lib/modules/fonts/libxtt.a
(II) Module xtt: vendor="X-TrueType Server Project"
compiled for 4.3.0, module version = 1.3.1
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font xtt
(II) LoadModule: "ddc"
(II) Loading /usr/X11R6/lib/modules/libddc.a
(II) Module ddc: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.6
(II) LoadModule: "glx"
(II) Loading /usr/X11R6/lib/modules/extensions/libglx.a
(II) Module glx: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.2
(II) Loading sub module "GLcore"
(II) LoadModule: "GLcore"
(II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a
(II) Module GLcore: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension GLX
(II) LoadModule: "dri"
(II) Loading /usr/X11R6/lib/modules/extensions/libdri.a
(II) Module dri: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.2
(II) Loading sub module "drm"
(II) LoadModule: "drm"
(II) Loading /usr/X11R6/lib/modules/freebsd/libdrm.a
(II) Module drm: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension XFree86-DRI
(II) LoadModule: "radeon"
(II) Loading /usr/X11R6/lib/modules/drivers/radeon_drv.o
(II) Module radeon: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 4.0.1
Module class: XFree86 Video Driver
ABI class: XFree86 Video Driver, version 0.6
(II) LoadModule: "ati"
(II) Loading /usr/X11R6/lib/modules/drivers/ati_drv.o
(II) Module ati: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 6.4.18
Module class: XFree86 Video Driver
ABI class: XFree86 Video Driver, version 0.6
(II) LoadModule: "mouse"
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
Module class: XFree86 XInput Driver
ABI class: XFree86 XInput driver, version 0.4
(II) ATI: ATI driver (version 6.4.18) for chipsets: ati, ativga
(II) R128: Driver for ATI Rage 128 chipsets:
ATI Rage 128 Mobility M3 LE (PCI), ATI Rage 128 Mobility M3 LF (AGP),
ATI Rage 128 Mobility M4 MF (AGP), ATI Rage 128 Mobility M4 ML (AGP),
ATI Rage 128 Pro GL PA (PCI/AGP), ATI Rage 128 Pro GL PB (PCI/AGP),
ATI Rage 128 Pro GL PC (PCI/AGP), ATI Rage 128 Pro GL PD (PCI),
ATI Rage 128 Pro GL PE (PCI/AGP), ATI Rage 128 Pro GL PF (AGP),
ATI Rage 128 Pro VR PG (PCI/AGP), ATI Rage 128 Pro VR PH (PCI/AGP),
ATI Rage 128 Pro VR PI (PCI/AGP), ATI Rage 128 Pro VR PJ (PCI/AGP),
ATI Rage 128 Pro VR PK (PCI/AGP), ATI Rage 128 Pro VR PL (PCI/AGP),
ATI Rage 128 Pro VR PM (PCI/AGP), ATI Rage 128 Pro VR PN (PCI/AGP),
ATI Rage 128 Pro VR PO (PCI/AGP), ATI Rage 128 Pro VR PP (PCI),
ATI Rage 128 Pro VR PQ (PCI/AGP), ATI Rage 128 Pro VR PR (PCI),
ATI Rage 128 Pro VR PS (PCI/AGP), ATI Rage 128 Pro VR PT (PCI/AGP),
ATI Rage 128 Pro VR PU (PCI/AGP), ATI Rage 128 Pro VR PV (PCI/AGP),
ATI Rage 128 Pro VR PW (PCI/AGP), ATI Rage 128 Pro VR PX (PCI/AGP),
ATI Rage 128 GL RE (PCI), ATI Rage 128 GL RF (AGP),
ATI Rage 128 RG (AGP), ATI Rage 128 VR RK (PCI),
ATI Rage 128 VR RL (AGP), ATI Rage 128 4X SE (PCI/AGP),
ATI Rage 128 4X SF (PCI/AGP), ATI Rage 128 4X SG (PCI/AGP),
ATI Rage 128 4X SH (PCI/AGP), ATI Rage 128 4X SK (PCI/AGP),
ATI Rage 128 4X SL (PCI/AGP), ATI Rage 128 4X SM (AGP),
ATI Rage 128 4X SN (PCI/AGP), ATI Rage 128 Pro ULTRA TF (AGP),
ATI Rage 128 Pro ULTRA TL (AGP), ATI Rage 128 Pro ULTRA TR (AGP),
ATI Rage 128 Pro ULTRA TS (AGP?), ATI Rage 128 Pro ULTRA TT (AGP?),
ATI Rage 128 Pro ULTRA TU (AGP?)
(II) RADEON: Driver for ATI Radeon chipsets: ATI Radeon QD (AGP),
ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
ATI Radeon VE/7000 QY (AGP), ATI Radeon VE/7000 QZ (AGP),
ATI Radeon Mobility M7 LW (AGP),
ATI Mobility FireGL 7800 M7 LX (AGP),
ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QI (AGP),
ATI Radeon 8500 QJ (AGP), ATI Radeon 8500 QK (AGP),
ATI Radeon 8500 QL (AGP), ATI Radeon 9100 QM (AGP),
ATI Radeon 8500 QN (AGP), ATI Radeon 8500 QO (AGP),
ATI Radeon 8500 Qh (AGP), ATI Radeon 8500 Qi (AGP),
ATI Radeon 8500 Qj (AGP), ATI Radeon 8500 Qk (AGP),
ATI Radeon 8500 Ql (AGP), ATI Radeon 8500 BB (AGP),
ATI Radeon 7500 QW (AGP), ATI Radeon 7500 QX (AGP),
ATI Radeon 9000 Id (AGP), ATI Radeon 9000 Ie (AGP),
ATI Radeon 9000 If (AGP), ATI Radeon 9000 Ig (AGP),
ATI Radeon Mobility M9 Ld (AGP), ATI Radeon Mobility M9 Le (AGP),
ATI Radeon Mobility M9 Lf (AGP), ATI Radeon Mobility M9 Lg (AGP),
ATI Radeon 9500 AD (AGP), ATI Radeon 9500 AE (AGP),
ATI Radeon 9500 AF (AGP), ATI FireGL Z1/X1 AG (AGP),
ATI Radeon 9700 Pro ND (AGP), ATI Radeon 9700/9500Pro NE (AGP),
ATI Radeon 9700 NF (AGP), ATI FireGL X1 NG (AGP)
(II) Primary Device is: PCI 01:00:0
(--) Assigning device section with no busID to primary device
(--) Chipset ATI Radeon Mobility M7 LW (AGP) found
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xc0400000 - 0xc07fffff (0x400000) MX[B]E
[6] -1 0 0xc0210000 - 0xc021ffff (0x10000) MX[B]E
[7] -1 0 0xc0200000 - 0xc020ffff (0x10000) MX[B]E
[8] -1 0 0xc0220000 - 0xc023ffff (0x20000) MX[B]E
[9] -1 0 0xc0000800 - 0xc0000bff (0x400) MX[B]E
[10] -1 0 0xc0000c00 - 0xc0000fff (0x400) MX[B]E
[11] -1 0 0xc0000000 - 0xc00007ff (0x800) MX[B]E
[12] -1 0 0xd0000000 - 0xcfffffff (0x0) MX[B]EO
[13] -1 0 0xc0100000 - 0xc010ffff (0x10000) MX[B](B)
[14] -1 0 0xe0000000 - 0xe7ffffff (0x8000000) MX[B](B)
[15] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[16] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[17] -1 0 0x00008000 - 0x000080ff (0x100) IX[B]E
[18] -1 0 0x00008400 - 0x000084ff (0x100) IX[B]E
[19] -1 0 0x00002000 - 0x000020ff (0x100) IX[B]E
[20] -1 0 0x00002400 - 0x000024ff (0x100) IX[B]E
[21] -1 0 0x000018c0 - 0x000018ff (0x40) IX[B]E
[22] -1 0 0x00001c00 - 0x00001cff (0x100) IX[B]E
[23] -1 0 0x00001880 - 0x000018bf (0x40) IX[B]E
[24] -1 0 0x00001860 - 0x0000187f (0x20) IX[B]E
[25] -1 0 0x00001840 - 0x0000185f (0x20) IX[B]E
[26] -1 0 0x00001820 - 0x0000183f (0x20) IX[B]E
[27] -1 0 0x00001800 - 0x0000181f (0x20) IX[B]E
[28] -1 0 0x00003000 - 0x000030ff (0x100) IX[B](B)
(II) Loading sub module "radeon"
(II) LoadModule: "radeon"
(II) Reloading /usr/X11R6/lib/modules/drivers/radeon_drv.o
(II) resource ranges after probing:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xc0400000 - 0xc07fffff (0x400000) MX[B]E
[6] -1 0 0xc0210000 - 0xc021ffff (0x10000) MX[B]E
[7] -1 0 0xc0200000 - 0xc020ffff (0x10000) MX[B]E
[8] -1 0 0xc0220000 - 0xc023ffff (0x20000) MX[B]E
[9] -1 0 0xc0000800 - 0xc0000bff (0x400) MX[B]E
[10] -1 0 0xc0000c00 - 0xc0000fff (0x400) MX[B]E
[11] -1 0 0xc0000000 - 0xc00007ff (0x800) MX[B]E
[12] -1 0 0xd0000000 - 0xcfffffff (0x0) MX[B]EO
[13] -1 0 0xc0100000 - 0xc010ffff (0x10000) MX[B](B)
[14] -1 0 0xe0000000 - 0xe7ffffff (0x8000000) MX[B](B)
[15] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[16] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[17] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[18] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[19] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[20] -1 0 0x00008000 - 0x000080ff (0x100) IX[B]E
[21] -1 0 0x00008400 - 0x000084ff (0x100) IX[B]E
[22] -1 0 0x00002000 - 0x000020ff (0x100) IX[B]E
[23] -1 0 0x00002400 - 0x000024ff (0x100) IX[B]E
[24] -1 0 0x000018c0 - 0x000018ff (0x40) IX[B]E
[25] -1 0 0x00001c00 - 0x00001cff (0x100) IX[B]E
[26] -1 0 0x00001880 - 0x000018bf (0x40) IX[B]E
[27] -1 0 0x00001860 - 0x0000187f (0x20) IX[B]E
[28] -1 0 0x00001840 - 0x0000185f (0x20) IX[B]E
[29] -1 0 0x00001820 - 0x0000183f (0x20) IX[B]E
[30] -1 0 0x00001800 - 0x0000181f (0x20) IX[B]E
[31] -1 0 0x00003000 - 0x000030ff (0x100) IX[B](B)
[32] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[33] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/X11R6/lib/modules/libvgahw.a
(II) Module vgahw: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.6
(II) RADEON(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(II) RADEON(0): PCI bus 1 card 0 func 0
(**) RADEON(0): Depth 24, (--) framebuffer bpp 32
(II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) RADEON(0): Default visual is TrueColor
(**) RADEON(0): Option "CloneDisplay" "0"
(==) RADEON(0): RGB weight 888
(II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/X11R6/lib/modules/libint10.a
(II) Module int10: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.6
(II) RADEON(0): initializing int10
(==) RADEON(0): Write-combining range (0xa0000,0x20000) was already clear
(==) RADEON(0): Write-combining range (0xc0000,0x40000) was already clear
(WW) RADEON(0): Bad V_BIOS checksum
(II) RADEON(0): Primary V_BIOS segment is: 0xc000
(==) RADEON(0): Write-combining range (0x0,0x1000) was already clear
(--) RADEON(0): Chipset: "ATI Radeon Mobility M7 LW (AGP)" (ChipID = 0x4c57)
(--) RADEON(0): Linear framebuffer at 0xe0000000
(--) RADEON(0): MMIO registers at 0xc0100000
(==) RADEON(0): Write-combining range (0xc0100000,0x80000) was already clear
(--) RADEON(0): VideoRAM: 32768 kByte (64-bit DDR SDRAM)
(==) RADEON(0): Write-combining range (0xc0100000,0x80000) was already clear
(II) RADEON(0): CloneDisplay option: Disable (0)
(II) RADEON(0): Primary Display == Type 2
(II) RADEON(0): Panel ID string: ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ
(II) RADEON(0): Panel Size from BIOS: 65535x65535
*** If unresolved symbols were reported above, they might not
*** be the reason for the server aborting.
Fatal server error:
Caught signal 11. Server aborting
When reporting a problem related to a server crash, please send
the full server output, not just the last messages.
This can be found in the log file "/var/log/XFree86.0.log".
Please report problems to xfree86@xxxxxxxxxxxx
# File generated by xf86config.
#
# Copyright (c) 1999 by The XFree86 Project, Inc.
#
# Permission is hereby granted, free of charge, to any person obtaining a
# copy of this software and associated documentation files (the "Software"),
# to deal in the Software without restriction, including without limitation
# the rights to use, copy, modify, merge, publish, distribute, sublicense,
# and/or sell copies of the Software, and to permit persons to whom the
# Software is furnished to do so, subject to the following conditions:
#
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
#
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
# THE XFREE86 PROJECT BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
# WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
# OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
# SOFTWARE.
#
# Except as contained in this notice, the name of the XFree86 Project shall
# not be used in advertising or otherwise to promote the sale, use or other
# dealings in this Software without prior written authorization from the
# XFree86 Project.
#
# **********************************************************************
# Refer to the XF86Config(4/5) man page for details about the format of
# this file.
# **********************************************************************
# **********************************************************************
# Module section -- this section is used to specify
# which dynamically loadable modules to load.
# **********************************************************************
#
Section "Module"
# This loads the DBE extension module.
Load "dbe" # Double buffer extension
# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
SubSection "extmod"
Option "omit xfree86-dga" # don't initialise the DGA extension
EndSubSection
# This loads the Type1 and FreeType font modules
Load "type1"
Load "speedo"
Load "freetype"
Load "xtt"
Load "ddc"
# This loads the GLX module
Load "glx"
# This loads the DRI module
Load "dri"
EndSection
# **********************************************************************
# Files section. This allows default font and rgb paths to be set
# **********************************************************************
Section "Files"
# The location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.
RgbPath "/usr/X11R6/lib/X11/rgb"
# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
#
# If you don't have a floating point coprocessor and emacs, Mosaic or other
# programs take long to start up, try moving the Type1 and Speedo directory
# to the end of this list (or comment them out).
#
FontPath "/usr/X11R6/lib/X11/fonts/local/"
FontPath "/usr/X11R6/lib/X11/fonts/misc/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/Speedo/"
FontPath "/usr/X11R6/lib/X11/fonts/Type1/"
# FontPath "/usr/X11R6/lib/X11/fonts/TrueType/"
# FontPath "/usr/X11R6/lib/X11/fonts/freefont/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/"
# The module search path. The default path is shown here.
# ModulePath "/usr/X11R6/lib/modules"
EndSection
# **********************************************************************
# Server flags section.
# **********************************************************************
Section "ServerFlags"
# Uncomment this to cause a core dump at the spot where a signal is
# received. This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging
# Option "NoTrapSignals"
# Uncomment this to disable the <Crtl><Alt><Fn> VT switch sequence
# (where n is 1 through 12). This allows clients to receive these key
# events.
# Option "DontVTSwitch"
# Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
# This allows clients to receive this key event.
# Option "DontZap"
# Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
# sequences. This allows clients to receive these key events.
# Option "Dont Zoom"
# Uncomment this to disable tuning with the xvidtune client. With
# it the client can still run and fetch card and monitor attributes,
# but it will not be allowed to change them. If it tries it will
# receive a protocol error.
# Option "DisableVidModeExtension"
# Uncomment this to enable the use of a non-local xvidtune client.
# Option "AllowNonLocalXvidtune"
# Uncomment this to disable dynamically modifying the input device
# (mouse and keyboard) settings.
# Option "DisableModInDev"
# Uncomment this to enable the use of a non-local client to
# change the keyboard or mouse settings (currently only xset).
# Option "AllowNonLocalModInDev"
EndSection
# **********************************************************************
# Input devices
# **********************************************************************
# **********************************************************************
# Core keyboard's InputDevice section
# **********************************************************************
Section "InputDevice"
Identifier "Keyboard1"
Driver "Keyboard"
# For most OSs the protocol can be omitted (it defaults to "Standard").
# When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
# uncomment the following line.
# Option "Protocol" "Xqueue"
Option "AutoRepeat" "500 30"
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
# Option "Xleds" "1 2 3"
# Option "LeftAlt" "Meta"
# Option "RightAlt" "ModeShift"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"
# These are the default XKB settings for XFree86
# Option "XkbRules" "xfree86"
# Option "XkbModel" "pc101"
# Option "XkbLayout" "us"
# Option "XkbVariant" ""
# Option "XkbOptions" ""
# Option "XkbDisable"
Option "XkbRules" "xfree86"
Option "XkbModel" "pc101"
Option "XkbLayout" "us"
EndSection
# **********************************************************************
# Core Pointer's InputDevice section
# **********************************************************************
Section "InputDevice"
# Identifier and driver
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "PS/2"
Option "Device" "/dev/sysmouse"
# Mouse-speed setting for PS/2 mouse.
# Option "Resolution" "256"
# When using XQUEUE, comment out the above two lines, and uncomment
# the following line.
# Option "Protocol" "Xqueue"
# Baudrate and SampleRate are only for some Logitech mice. In
# almost every case these lines should be omitted.
# Option "BaudRate" "9600"
# Option "SampleRate" "150"
# Emulate3Buttons is an option for 2-button Microsoft mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)
# Option "Emulate3Buttons"
# Option "Emulate3Timeout" "50"
# ChordMiddle is an option for some 3-button Logitech mice
# Option "ChordMiddle"
EndSection
# **********************************************************************
# Other input device sections
# this is optional and is required only if you
# are using extended input devices. This is for example only. Refer
# to the XF86Config man page for a description of the options.
# **********************************************************************
#
# Section "InputDevice"
# Identifier "Mouse2"
# Driver "mouse"
# Option "Protocol" "MouseMan"
# Option "Device" "/dev/mouse2"
# EndSection
#
# Section "InputDevice"
# Identifier "spaceball"
# Driver "magellan"
# Option "Device" "/dev/cua0"
# EndSection
#
# Section "InputDevice"
# Identifier "spaceball2"
# Driver "spaceorb"
# Option "Device" "/dev/cua0"
# EndSection
#
# Section "InputDevice"
# Identifier "touchscreen0"
# Driver "microtouch"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "1412"
# Option "MaxX" "15184"
# Option "MinY" "15372"
# Option "MaxY" "1230"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
#
# Section "InputDevice"
# Identifier "touchscreen1"
# Driver "elo2300"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "231"
# Option "MaxX" "3868"
# Option "MinY" "3858"
# Option "MaxY" "272"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonThreshold" "17"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
# **********************************************************************
# Monitor section
# **********************************************************************
# Any number of monitor sections may be present
Section "Monitor"
Identifier "My Monitor"
# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
HorizSync 31.5 - 57.0
# HorizSync 30-64 # multisync
# HorizSync 31.5, 35.2 # multiple fixed sync frequencies
# HorizSync 15-25, 30-50 # multiple ranges of sync frequencies
# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
VertRefresh 40-150
EndSection
# **********************************************************************
# Graphics device section
# **********************************************************************
# Any number of graphics device sections may be present
# Standard VGA Device:
Section "Device"
Identifier "Standard VGA"
VendorName "Unknown"
BoardName "Unknown"
# The chipset line is optional in most cases. It can be used to override
# the driver's chipset detection, and should not normally be specified.
# Chipset "generic"
# The Driver line must be present. When using run-time loadable driver
# modules, this line instructs the server to load the specified driver
# module. Even when not using loadable driver modules, this line
# indicates which driver should interpret the information in this section.
Driver "vga"
# The BusID line is used to specify which of possibly multiple devices
# this section is intended for. When this line isn't present, a device
# section can only match up with the primary video device. For PCI
# devices a line like the following could be used. This line should not
# normally be included unless there is more than one video device
# intalled.
# BusID "PCI:0:10:0"
# VideoRam 256
# Clocks 25.2 28.3
EndSection
# Device configured by xf86config:
Section "Device"
Identifier "** ATI Radeon (generic) [radeon]"
Driver "radeon"
#VideoRam 32768
# Insert Clocks lines here if appropriate
Option "CloneDisplay" "0"
EndSection
# **********************************************************************
# Screen sections
# **********************************************************************
# Any number of screen sections may be present. Each describes
# the configuration of a single screen. A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.
Section "Screen"
Identifier "Screen 1"
Device "** ATI Radeon (generic) [radeon]"
Monitor "My Monitor"
DefaultDepth 24
Subsection "Display"
Depth 8
Modes "1024x768"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 16
Modes "1024x768"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 24
Modes "1024x768"
ViewPort 0 0
EndSubsection
EndSection
# **********************************************************************
# ServerLayout sections.
# **********************************************************************
# Any number of ServerLayout sections may be present. Each describes
# the way multiple screens are organised. A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option. In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.
Section "ServerLayout"
# The Identifier line must be present
Identifier "Simple Layout"
# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens. The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen. In this example, screen 2 is located to the
# right of screen 1.
Screen "Screen 1"
# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used. Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".
InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection
Section "DRI"
Mode 0666
EndSection
_______________________________________________
XFree86 mailing list
XFree86@xxxxxxxxxxx
http://XFree86.Org/mailman/listinfo/xfree86
