Hi guyz,
I would really appreciate if anybody could help me with my
issue. I am using RedHat Linux 7.1 on my computer with a Pentium II
266Mhz, 81MB of RAM, 2MB VRAM with a Cirrus Logic 5446 Video Card. The
Motherboard is a Intel 440LX Motherboard bought in August 1998. ( Pretty
Old I would guess). I am using Xine to play Audio/Video on my computer.
The issue is that when the fullscreen mode is run, I find the Video is
slightly jerky and after reading the documentation, I found that I don't
have Xv extention on my computer.
Is it that I have to upgrade my Xfree86 version to 4.3 or should I
change my video card?
Is there any other means of avoiding dropped frames while playing Video
using Xine in fullscreen mode only?
I am enclosing herewith my XF86Config and XFree86.0.log as mentioned on
the Xfree86.org website.
Thanks and Regards,
Satej J A
# File generated by XConfigurator.
# **********************************************************************
# Refer to the XF86Config(4/5) man page for details about the format of
# this file.
# **********************************************************************
# **********************************************************************
# Files section. This allows default font and rgb paths to be set
# **********************************************************************
Section "Files"
# The location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.
RgbPath "/usr/X11R6/lib/X11/rgb"
# Multiple FontPath entries are allowed (they are concatenated together)
# By default, Red Hat 6.0 and later now use a font server independent of
# the X server to render fonts.
FontPath "unix/:7100"
EndSection
# **********************************************************************
# Server flags section.
# **********************************************************************
Section "ServerFlags"
# Uncomment this to cause a core dump at the spot where a signal is
# received. This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging
#NoTrapSignals
# Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
# This allows clients to receive this key event.
#DontZap
# Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
# sequences. This allows clients to receive these key events.
#DontZoom
EndSection
# **********************************************************************
# Input devices
# **********************************************************************
# **********************************************************************
# Keyboard section
# **********************************************************************
Section "Keyboard"
Protocol "Standard"
# when using XQUEUE, comment out the above line, and uncomment the
# following line
#Protocol "Xqueue"
AutoRepeat 500 5
# Let the server do the NumLock processing. This should only be
# required when using pre-R6 clients
#ServerNumLock
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
#Xleds 1 2 3
#To set the LeftAlt to Meta, RightAlt key to ModeShift,
#RightCtl key to Compose, and ScrollLock key to ModeLock:
LeftAlt Meta
RightAlt Meta
ScrollLock Compose
RightCtl Control
# To disable the XKEYBOARD extension, uncomment XkbDisable.
# XkbDisable
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# XkbModel "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
# XkbModel "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# XkbLayout "de"
# or:
# XkbLayout "de"
# XkbVariant "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
# XkbOptions "ctrl:swapcaps"
# These are the default XKB settings for XFree86
# XkbRules "xfree86"
# XkbModel "pc101"
# XkbLayout "us"
# XkbVariant ""
# XkbOptions ""
XkbKeycodes "xfree86"
XkbTypes "default"
XkbCompat "default"
XkbSymbols "us(pc101)"
XkbGeometry "pc"
XkbRules "xfree86"
XkbModel "pc101"
XkbLayout "us"
EndSection
# **********************************************************************
# Pointer section
# **********************************************************************
Section "Pointer"
Protocol "IntelliMouse"
Device "/dev/mouse"
ZAxisMapping 4 5
# When using XQUEUE, comment out the above two lines, and uncomment
# the following line.
# Protocol "Xqueue"
# Baudrate and SampleRate are only for some Logitech mice
# BaudRate 9600
# SampleRate 150
# Emulate3Buttons is an option for 2-button Microsoft mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)
# Emulate3Buttons
# Emulate3Timeout 50
# ChordMiddle is an option for some 3-button Logitech mice
# ChordMiddle
EndSection
# **********************************************************************
# Monitor section
# **********************************************************************
# Any number of monitor sections may be present
Section "Monitor"
Identifier "Samsung Samtron 5Ei"
VendorName "Unknown"
ModelName "Unknown"
# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
HorizSync 30-55
# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
VertRefresh 50-120
# Modes can be specified in two formats. A compact one-line format, or
# a multi-line format.
# These two are equivalent
# ModeLine "1024x768i" 45 1024 1048 1208 1264 768 776 784 817 Interlace
# Mode "1024x768i"
# DotClock 45
# HTimings 1024 1048 1208 1264
# VTimings 768 776 784 817
# Flags "Interlace"
# EndMode
# This is a set of standard mode timings. Modes that are out of monitor spec
# are automatically deleted by the server (provided the HorizSync and
# VertRefresh lines are correct), so there's no immediate need to
# delete mode timings (unless particular mode timings don't work on your
# monitor). With these modes, the best standard mode that your monitor
# and video card can support for a given resolution is automatically
# used.
# 512x384 @ 78 Hz, 31.50 kHz hsync
Modeline "512x384" 20.160 512 528 592 640 384 385 388 404 -HSync -VSync
# 512x384 @ 85 Hz, 34.38 kHz hsync
Modeline "512x384" 22 512 528 592 640 384 385 388 404 -HSync -VSync
# 640x400 @ 70 Hz, 31.5 kHz hsync
Modeline "640x400" 25.175 640 664 760 800 400 409 411 450
# 640x400 @ 85 Hz, 37.86 kHz hsync
Modeline "640x400" 31.5 640 672 736 832 400 401 404 445 -HSync +VSync
# 640x480 @ 100 Hz, 53.01 kHz hsync
Modeline "640x480" 45.8 640 672 768 864 480 488 494 530 -HSync -VSync
# 640x480 @ 60 Hz, 31.5 kHz hsync
Modeline "640x480" 25.175 640 664 760 800 480 491 493 525
# 640x480 @ 72 Hz, 36.5 kHz hsync
Modeline "640x480" 31.5 640 680 720 864 480 488 491 521
# 640x480 @ 75 Hz, 37.50 kHz hsync
ModeLine "640x480" 31.5 640 656 720 840 480 481 484 500 -HSync -VSync
# 640x480 @ 85 Hz, 43.27 kHz hsync
Modeline "640x480" 36 640 696 752 832 480 481 484 509 -HSync -VSync
# 800x600 @ 100 Hz, 64.02 kHz hsync
Modeline "800x600" 69.65 800 864 928 1088 600 604 610 640 -HSync -VSync
# 800x600 @ 56 Hz, 35.15 kHz hsync
ModeLine "800x600" 36 800 824 896 1024 600 601 603 625
# 800x600 @ 60 Hz, 37.8 kHz hsync
Modeline "800x600" 40 800 840 968 1056 600 601 605 628 +hsync +vsync
# 800x600 @ 72 Hz, 48.0 kHz hsync
Modeline "800x600" 50 800 856 976 1040 600 637 643 666 +hsync +vsync
# 800x600 @ 85 Hz, 55.84 kHz hsync
Modeline "800x600" 60.75 800 864 928 1088 600 616 621 657 -HSync -VSync
# 1024x480 for certain Vaios
Modeline "1024x480" 65 1024 1032 1176 1344 480 491 493 525 -HSync -VSync
# 1024x768 @ 100Hz, 80.21 kHz hsync
Modeline "1024x768" 115.5 1024 1056 1248 1440 768 771 781 802 -HSync -VSync
# 1024x768 @ 60 Hz, 48.4 kHz hsync
Modeline "1024x768" 65 1024 1032 1176 1344 768 771 777 806 -hsync -vsync
# 1024x768 @ 70 Hz, 56.5 kHz hsync
Modeline "1024x768" 75 1024 1048 1184 1328 768 771 777 806 -hsync -vsync
# 1024x768 @ 76 Hz, 62.5 kHz hsync
Modeline "1024x768" 85 1024 1032 1152 1360 768 784 787 823
# 1024x768 @ 85 Hz, 70.24 kHz hsync
Modeline "1024x768" 98.9 1024 1056 1216 1408 768 782 788 822 -HSync -VSync
# 1152x864 @ 100 Hz, 89.62 kHz hsync
Modeline "1152x864" 137.65 1152 1184 1312 1536 864 866 885 902 -HSync -VSync
# 1152x864 @ 60 Hz, 53.5 kHz hsync
Modeline "1152x864" 89.9 1152 1216 1472 1680 864 868 876 892 -HSync -VSync
# 1152x864 @ 70 Hz, 62.4 kHz hsync
Modeline "1152x864" 92 1152 1208 1368 1474 864 865 875 895
# 1152x864 @ 78 Hz, 70.8 kHz hsync
Modeline "1152x864" 110 1152 1240 1324 1552 864 864 876 908
# 1152x864 @ 84 Hz, 76.0 kHz hsync
Modeline "1152x864" 135 1152 1464 1592 1776 864 864 876 908
# 1280x960 @ 60 HzModeline "1280x960" 108 1280 1376 1488 1800 960 961 964 1000 +HSync +VSync
# 1280x960 @ 85 HzModeline "1280x960" 148.5 1280 1344 1504 1728 960 961 964 1011 +HSync +VSync
# 1280x1024 @ 100 Hz, 107.16 kHz hsync
Modeline "1280x1024" 181.75 1280 1312 1440 1696 1024 1031 1046 1072 -HSync -VSync
# 1280x1024 @ 61 Hz, 64.2 kHz hsync
Modeline "1280x1024" 110 1280 1328 1512 1712 1024 1025 1028 1054
# 1280x1024 @ 70 Hz, 74.59 kHz hsync
Modeline "1280x1024" 126.5 1280 1312 1472 1696 1024 1032 1040 1068 -HSync -VSync
# 1280x1024 @ 74 Hz, 78.85 kHz hsync
Modeline "1280x1024" 135 1280 1312 1456 1712 1024 1027 1030 1064
# 1280x1024 @ 76 Hz, 81.13 kHz hsync
Modeline "1280x1024" 135 1280 1312 1416 1664 1024 1027 1030 1064
# 1280x1024 @ 85 Hz, 91.15 kHz hsync
Modeline "1280x1024" 157.5 1280 1344 1504 1728 1024 1025 1028 1072 +HSync +VSync
# 1400x1050 @ 60Hz, 65.8 kHz hsync
Modeline "1400x1050" 129 1400 1464 1656 1960 1050 1051 1054 1100 +HSync +VSync
# 1400x1050 @ 70Hz, 76.8 kHz hsync
Modeline "1400x1050" 151 1400 1464 1656 1960 1050 1051 1054 1100 +HSync +VSync
# 1400x1050 @ 75Hz, 82.3 kHz hsync
Modeline "1400x1050" 162 1400 1464 1656 1960 1050 1051 1054 1100 +HSync +VSync
# 1400x1050 @ 85Hz, 93.2 kHz hsync
Modeline "1400x1050" 184 1400 1464 1656 1960 1050 1051 1054 1100 +HSync +VSync
# 1600x1200 @ 60Hz, 75.00 kHz hsync
Modeline "1600x1200" 162 1600 1664 1856 2160 1200 1201 1204 1250 +HSync +VSync
# 1600x1200 @ 70 Hz, 87.50 kHz hsync
Modeline "1600x1200" 189 1600 1664 1856 2160 1200 1201 1204 1250 -HSync -VSync
# 1600x1200 @ 75 Hz, 93.75 kHz hsync
Modeline "1600x1200" 202.5 1600 1664 1856 2160 1200 1201 1204 1250 +HSync +VSync
# 1600x1200 @ 85 Hz, 105.77 kHz hsync
Modeline "1600x1200" 220 1600 1616 1808 2080 1200 1204 1207 1244 +HSync +VSync
# 1800x1440 @ 64Hz, 96.15 kHz hsync
ModeLine "1800X1440" 230 1800 1896 2088 2392 1440 1441 1444 1490 +HSync +VSync
# 1800x1440 @ 70Hz, 104.52 kHz hsync
ModeLine "1800X1440" 250 1800 1896 2088 2392 1440 1441 1444 1490 +HSync +VSync
# Low-res Doublescan modes
# If your chipset does not support doublescan, you get a 'squashed'
# resolution like 320x400.
# 320x200 @ 70 Hz, 31.5 kHz hsync, 8:5 aspect ratio
Modeline "320x200" 12.588 320 336 384 400 200 204 205 225 Doublescan
# 320x240 @ 60 Hz, 31.5 kHz hsync, 4:3 aspect ratio
Modeline "320x240" 12.588 320 336 384 400 240 245 246 262 Doublescan
# 320x240 @ 72 Hz, 36.5 kHz hsync
Modeline "320x240" 15.750 320 336 384 400 240 244 246 262 Doublescan
# 400x300 @ 56 Hz, 35.2 kHz hsync, 4:3 aspect ratio
ModeLine "400x300" 18 400 416 448 512 300 301 302 312 Doublescan
# 400x300 @ 60 Hz, 37.8 kHz hsync
Modeline "400x300" 20 400 416 480 528 300 301 303 314 Doublescan
# 400x300 @ 72 Hz, 48.0 kHz hsync
Modeline "400x300" 25 400 424 488 520 300 319 322 333 Doublescan
# 480x300 @ 56 Hz, 35.2 kHz hsync, 8:5 aspect ratio
ModeLine "480x300" 21.656 480 496 536 616 300 301 302 312 Doublescan
# 480x300 @ 60 Hz, 37.8 kHz hsync
Modeline "480x300" 23.890 480 496 576 632 300 301 303 314 Doublescan
# 480x300 @ 63 Hz, 39.6 kHz hsync
Modeline "480x300" 25 480 496 576 632 300 301 303 314 Doublescan
# 480x300 @ 72 Hz, 48.0 kHz hsync
Modeline "480x300" 29.952 480 504 584 624 300 319 322 333 Doublescan
EndSection
# **********************************************************************
# Graphics device section
# **********************************************************************
# Any number of graphics device sections may be present
Section "Device"
Identifier "Generic VGA"
VendorName "Unknown"
BoardName "Unknown"
Chipset "generic"
# VideoRam 256
# Clocks 25.2 28.3
EndSection
# Device configured by Xconfigurator:
Section "Device"
Identifier "Cirrus Logic|GD 5446"
VendorName "Unknown"
BoardName "Unknown"
#VideoRam 2048
Option "NoAccel"
# Use Option "no_bitblt" if you have graphics problems. If that fails
# try Option "noaccel".
# Refer to /usr/X11R6/lib/doc/README.cirrus.
# To allow linear addressing, uncomment the Option line and the
# address that the card maps the framebuffer to.
# Insert Clocks lines here if appropriate
EndSection
# **********************************************************************
# Screen sections
# **********************************************************************
# The Colour SVGA server
Section "Screen"
Driver "svga"
Device "Generic VGA"
#Device "Cirrus Logic|GD 5446"
Monitor "Samsung Samtron 5Ei"
Subsection "Display"
Depth 8
#Modes (null)
ViewPort 0 0
EndSubsection
EndSection
# The 16-color VGA server
Section "Screen"
Driver "vga16"
Device "Generic VGA"
Monitor "Samsung Samtron 5Ei"
Subsection "Display"
Modes "640x480" "800x600"
ViewPort 0 0
EndSubsection
EndSection
# The Mono server
Section "Screen"
Driver "vga2"
Device "Generic VGA"
Monitor "Samsung Samtron 5Ei"
Subsection "Display"
Modes "640x480" "800x600"
ViewPort 0 0
EndSubsection
EndSection
# The accelerated servers (S3, Mach32, Mach8, 8514, P9000, AGX, W32, Mach64
# I128, and S3V)
Section "Screen"
Driver "accel"
Device "Cirrus Logic|GD 5446"
Monitor "Samsung Samtron 5Ei"
DefaultColorDepth 16
Subsection "Display"
Depth 16
Modes "800x600"
ViewPort 0 0
EndSubsection
EndSection
XFree86 Version 4.0.3 / X Window System
(protocol Version 11, revision 0, vendor release 6400)
Release Date: 16 March 2001
If the server is older than 6-12 months, or if your card is
newer than the above date, look for a newer version before
reporting problems. (See http://www.XFree86.Org/FAQ)
Operating System: Linux 2.2.17-8smp i686 [ELF]
Module Loader present
(==) Log file: "/var/log/XFree86.0.log", Time: Mon Sep 15 01:30:17 2003
(==) Using config file: "/etc/X11/XF86Config-4"
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (??) unknown.
(==) ServerLayout "XFree86 Configured"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Samsung Samtron 5Ei"
(**) | |-->Device "Cirrus Logic|GD 5446"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(**) Option "XkbLayout" "us"
(**) XKB: layout: "us"
(**) FontPath set to "unix/:7100"
(==) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(==) ModulePath set to "/usr/X11R6/lib/modules"
(--) using VT number 7
(II) Open APM successful
(II) Module ABI versions:
XFree86 ANSI C Emulation: 0.1
XFree86 Video Driver: 0.3
XFree86 XInput driver : 0.1
XFree86 Server Extension : 0.1
XFree86 Font Renderer : 0.2
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="The XFree86 Project"
compiled for 4.0.3, module version = 1.0.0
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.2
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="The XFree86 Project"
compiled for 4.0.3, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.3
(II) PCI: Probing config type using method 1
(II) PCI: Config type is 1
(II) PCI: stages = 0x03, oldVal1 = 0x80000058, mode1Res1 = 0x80000000
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 8086,7180 card 0000,0000 rev 03 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 8086,7181 card 0000,0000 rev 03 class 06,04,00 hdr 01
(II) PCI: 00:07:0: chip 8086,7110 card 0000,0000 rev 01 class 06,01,00 hdr 80
(II) PCI: 00:07:1: chip 8086,7111 card 0000,0000 rev 01 class 01,01,80 hdr 00
(II) PCI: 00:07:2: chip 8086,7112 card 0000,0000 rev 01 class 0c,03,00 hdr 00
(II) PCI: 00:07:3: chip 8086,7113 card 0000,0000 rev 01 class 06,80,00 hdr 00
(II) PCI: 00:12:0: chip 1013,00b8 card 0000,0000 rev 45 class 03,00,00 hdr 00
(II) PCI: End of PCI scan
(II) LoadModule: "scanpci"
(II) Loading /usr/X11R6/lib/modules/libscanpci.a
(II) Module scanpci: vendor="The XFree86 Project"
compiled for 4.0.3, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.3
(II) UnloadModule: "scanpci"
(II) Unloading /usr/X11R6/lib/modules/libscanpci.a
(II) Host-to-PCI bridge:
(II) PCI-to-ISA bridge:
(II) PCI-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (-1,0,0), BCTRL: 0x00 (VGA_EN is cleared)
(II) Bus 0 I/O range:
[0] -1 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
[0] -1 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x03 (VGA_EN is cleared)
(II) Bus 1 I/O range:
[0] -1 0x0000e000 - 0x0000efff (0x1000) IX[B]
(II) Bus 1 non-prefetchable memory range:
[0] -1 0xdf000000 - 0xdfffffff (0x1000000) MX[B]
(II) Bus 1 prefetchable memory range:
[0] -1 0xaff00000 - 0xafffffff (0x100000) MX[B]
(II) Bus -1: bridge is at (0:7:0), (0,-1,0), BCTRL: 0x00 (VGA_EN is cleared)
(II) Bus -1 I/O range:
(II) Bus -1 non-prefetchable memory range:
(II) Bus -1 prefetchable memory range:
(--) PCI:*(0:18:0) Cirrus Logic GD5446 rev 69, Mem @ 0xe8000000/25, 0xea000000/12
(II) Addressable bus resource ranges are
[0] -1 0x00000000 - 0xffffffff (0x0) MX[B]
[1] -1 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
[0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0x00000000 - 0x000001ff (0x200) IX[B]E
(II) Active PCI resource ranges:
[0] -1 0xe0000000 - 0xe7ffffff (0x8000000) MX[B]
[1] -1 0xea000000 - 0xea000fff (0x1000) MX[B](B)
[2] -1 0xe8000000 - 0xe9ffffff (0x2000000) MX[B](B)
[3] -1 0x00006400 - 0x0000641f (0x20) IX[B]
[4] -1 0x0000f000 - 0x0000f00f (0x10) IX[B]
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0xe0000000 - 0xe7ffffff (0x8000000) MX[B]
[1] -1 0xea000000 - 0xea000fff (0x1000) MX[B](B)
[2] -1 0xe8000000 - 0xe9ffffff (0x2000000) MX[B](B)
[3] -1 0x00006400 - 0x0000641f (0x20) IX[B]
[4] -1 0x0000f000 - 0x0000f00f (0x10) IX[B]
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0x00000000 - 0x000001ff (0x200) IX[B]E
(II) All system resource ranges:
[0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0xe0000000 - 0xe7ffffff (0x8000000) MX[B]
[6] -1 0xea000000 - 0xea000fff (0x1000) MX[B](B)
[7] -1 0xe8000000 - 0xe9ffffff (0x2000000) MX[B](B)
[8] -1 0x00000000 - 0x000001ff (0x200) IX[B]E
[9] -1 0x00006400 - 0x0000641f (0x20) IX[B]
[10] -1 0x0000f000 - 0x0000f00f (0x10) IX[B]
(II) LoadModule: "dbe"
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="The XFree86 Project"
compiled for 4.0.3, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "GLcore"
(II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a
(II) Module GLcore: vendor="The XFree86 Project"
compiled for 4.0.3, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.1
(II) LoadModule: "dri"
(II) Loading /usr/X11R6/lib/modules/extensions/libdri.a
(II) Module dri: vendor="The XFree86 Project"
compiled for 4.0.3, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension XFree86-DRI
(II) Loading sub module "drm"
(II) LoadModule: "drm"
(II) Loading /usr/X11R6/lib/modules/linux/libdrm.a
(II) Module drm: vendor="The XFree86 Project"
compiled for 4.0.3, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.1
(II) LoadModule: "glx"
(II) Loading /usr/X11R6/lib/modules/extensions/libglx.a
(II) Module glx: vendor="The XFree86 Project"
compiled for 4.0.3, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension GLX
(II) Loading sub module "GLcore"
(II) LoadModule: "GLcore"
(II) Reloading /usr/X11R6/lib/modules/extensions/libGLcore.a
(II) LoadModule: "extmod"
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="The XFree86 Project"
compiled for 4.0.3, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension FontCache
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) LoadModule: "v4l"
(II) Loading /usr/X11R6/lib/modules/drivers/linux/v4l_drv.o
(II) Module v4l: vendor="The XFree86 Project"
compiled for 4.0.3, module version = 0.0.1
ABI class: XFree86 Video Driver, version 0.3
(II) LoadModule: "cirrus"
(II) Loading /usr/X11R6/lib/modules/drivers/cirrus_drv.o
(II) Module cirrus: vendor="The XFree86 Project"
compiled for 4.0.3, module version = 1.0.0
Module class: XFree86 Video Driver
ABI class: XFree86 Video Driver, version 0.3
(II) LoadModule: "mouse"
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="The XFree86 Project"
compiled for 4.0.3, module version = 1.0.0
Module class: XFree86 XInput Driver
ABI class: XFree86 XInput driver, version 0.1
(II) v4l driver for Video4Linux
(II) CIRRUS: driver for Cirrus chipsets: CLGD5430, CLGD5434-4, CLGD5434-8,
CLGD5436, CLGD5446, CLGD5480, CL-GD5462, CL-GD5464, CL-GD5464BD,
CL-GD5465, CL-GD7548
(II) Primary Device is: PCI 00:12:0
(--) Assigning device section with no busID to primary device
(--) Chipset CLGD5446 found
(II) Loading sub module "cirrus_alpine"
(II) LoadModule: "cirrus_alpine"
(II) Loading /usr/X11R6/lib/modules/drivers/cirrus_alpine.o
(II) Module cirrus_alpine: vendor="The XFree86 Project"
compiled for 4.0.3, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.3
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0xe0000000 - 0xe7ffffff (0x8000000) MX[B]
[6] -1 0xea000000 - 0xea000fff (0x1000) MX[B](B)
[7] -1 0xe8000000 - 0xe9ffffff (0x2000000) MX[B](B)
[8] -1 0x00000000 - 0x000001ff (0x200) IX[B]E
[9] -1 0x00006400 - 0x0000641f (0x20) IX[B]
[10] -1 0x0000f000 - 0x0000f00f (0x10) IX[B]
(II) resource ranges after probing:
[0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0xe0000000 - 0xe7ffffff (0x8000000) MX[B]
[6] -1 0xea000000 - 0xea000fff (0x1000) MX[B](B)
[7] -1 0xe8000000 - 0xe9ffffff (0x2000000) MX[B](B)
[8] 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[9] 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[10] 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[11] -1 0x00000000 - 0x000001ff (0x200) IX[B]E
[12] -1 0x00006400 - 0x0000641f (0x20) IX[B]
[13] -1 0x0000f000 - 0x0000f00f (0x10) IX[B]
[14] 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[15] 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/X11R6/lib/modules/libvgahw.a
(II) Module vgahw: vendor="The XFree86 Project"
compiled for 4.0.3, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.3
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/X11R6/lib/modules/linux/libint10.a
(II) Module int10: vendor="The XFree86 Project"
compiled for 4.0.3, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.3
(II) CIRRUS(0): initializing int10
(II) CIRRUS(0): Primary V_BIOS segment is: 0xc000
(**) CIRRUS(0): Depth 16, (--) framebuffer bpp 16
(==) CIRRUS(0): RGB weight 565
(==) CIRRUS(0): Default visual is TrueColor
(**) CIRRUS(0): Option "NoAccel"
(==) CIRRUS(0): Using SW cursor
(**) CIRRUS(0): Acceleration disabled
(--) CIRRUS(0): Linear framebuffer at 0xE8000000
(--) CIRRUS(0): MMIO registers at 0xEA000000
(--) CIRRUS(0): Using MMIO
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Loading /usr/X11R6/lib/modules/libi2c.a
(II) Module i2c: vendor="The XFree86 Project"
compiled for 4.0.3, module version = 1.2.0
ABI class: XFree86 Video Driver, version 0.3
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Loading /usr/X11R6/lib/modules/libddc.a
(II) Module ddc: vendor="The XFree86 Project"
compiled for 4.0.3, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.3
(II) CIRRUS(0): I2C bus "I2C bus 1" initialized.
(II) CIRRUS(0): I2C bus "I2C bus 2" initialized.
(II) CIRRUS(0): I2C device "I2C bus 1:ddc2" registered.
(II) CIRRUS(0): I2C device "I2C bus 1:ddc2" removed.
(==) CIRRUS(0): Using gamma correction (1.0, 1.0, 1.0)
(==) CIRRUS(0): Write-combining range (0xe8000000,0x100000)
(--) CIRRUS(0): Memory Config reg 1 is 0x1B
(--) CIRRUS(0): Memory Config reg 2 is 0x21
(--) CIRRUS(0): VideoRAM: 2048 kByte
(==) CIRRUS(0): Min pixel clock is 12 MHz
(--) CIRRUS(0): Max pixel clock is 85 MHz
(II) CIRRUS(0): Samsung Samtron 5Ei: Using hsync range of 30.00-55.00 kHz
(II) CIRRUS(0): Samsung Samtron 5Ei: Using vrefresh range of 50.00-120.00 Hz
(II) CIRRUS(0): Clock range: 12.00 to 85.50 MHz
(WW) CIRRUS(0): Default mode "1024x768" deleted (bad mode clock/interlace/doublescan)
(WW) CIRRUS(0): Default mode "1024x768" deleted (hsync out of range)
(WW) CIRRUS(0): Default mode "1024x768" deleted (hsync out of range)
(WW) CIRRUS(0): Default mode "1024x768" deleted (bad mode clock/interlace/doublescan)
(WW) CIRRUS(0): Default mode "1152x864" deleted (bad mode clock/interlace/doublescan)
(WW) CIRRUS(0): Default mode "1280x960" deleted (insufficient memory for mode)
(WW) CIRRUS(0): Default mode "1280x960" deleted (insufficient memory for mode)
(WW) CIRRUS(0): Default mode "1280x1024" deleted (insufficient memory for mode)
(WW) CIRRUS(0): Default mode "1280x1024" deleted (insufficient memory for mode)
(WW) CIRRUS(0): Default mode "1280x1024" deleted (insufficient memory for mode)
(WW) CIRRUS(0): Default mode "1400x1050" deleted (insufficient memory for mode)
(WW) CIRRUS(0): Default mode "1400x1050" deleted (insufficient memory for mode)
(WW) CIRRUS(0): Default mode "1400x1050" deleted (insufficient memory for mode)
(WW) CIRRUS(0): Default mode "1400x1050" deleted (insufficient memory for mode)
(WW) CIRRUS(0): Default mode "1600x1200" deleted (insufficient memory for mode)
(WW) CIRRUS(0): Default mode "1600x1200" deleted (insufficient memory for mode)
(WW) CIRRUS(0): Default mode "1600x1200" deleted (insufficient memory for mode)
(WW) CIRRUS(0): Default mode "1600x1200" deleted (insufficient memory for mode)
(WW) CIRRUS(0): Default mode "1600x1200" deleted (insufficient memory for mode)
(WW) CIRRUS(0): Default mode "1792x1344" deleted (insufficient memory for mode)
(WW) CIRRUS(0): Default mode "1792x1344" deleted (insufficient memory for mode)
(WW) CIRRUS(0): Default mode "1856x1392" deleted (insufficient memory for mode)
(WW) CIRRUS(0): Default mode "1856x1392" deleted (insufficient memory for mode)
(WW) CIRRUS(0): Default mode "1920x1440" deleted (insufficient memory for mode)
(WW) CIRRUS(0): Default mode "1920x1440" deleted (insufficient memory for mode)
(--) CIRRUS(0): Virtual size is 800x600 (pitch 896)
(**) CIRRUS(0): Default mode "800x600": 56.3 MHz, 53.7 kHz, 85.1 Hz
(==) CIRRUS(0): DPI set to (75, 75)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/X11R6/lib/modules/libfb.a
(II) Module fb: vendor="The XFree86 Project"
compiled for 4.0.3, module version = 1.0.0
ABI class: XFree86 ANSI C Emulation, version 0.1
Symbol VBEInit from module /usr/X11R6/lib/modules/drivers/cirrus_drv.o is unresolved!
Symbol vbeDoEDID from module /usr/X11R6/lib/modules/drivers/cirrus_drv.o is unresolved!
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] 0 0xea000000 - 0xea000fff (0x1000) MX[B]
[1] 0 0xe8000000 - 0xe9ffffff (0x2000000) MX[B]
[2] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[3] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[4] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[5] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
[6] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[7] -1 0xe0000000 - 0xe7ffffff (0x8000000) MX[B]
[8] -1 0xea000000 - 0xea000fff (0x1000) MX[B](B)
[9] -1 0xe8000000 - 0xe9ffffff (0x2000000) MX[B](B)
[10] 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprU)
[11] 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprU)
[12] 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprU)
[13] -1 0x00000000 - 0x000001ff (0x200) IX[B]E
[14] -1 0x00006400 - 0x0000641f (0x20) IX[B]
[15] -1 0x0000f000 - 0x0000f00f (0x10) IX[B]
[16] 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
[17] 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU)
(==) CIRRUS(0): Write-combining range (0xe8000000,0x200000)
(==) CIRRUS(0): Silken mouse enabled
(II) CIRRUS(0): Using 570 lines for offscreen memory
(**) Option "dpms"
(**) CIRRUS(0): DPMS enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension LBX
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(**) Option "Protocol" "IntelliMouse"
(**) Mouse0: Protocol: "IntelliMouse"
(**) Option "CorePointer"
(**) Mouse0: Core Pointer
(**) Option "Device" "/dev/mouse"
(**) Option "BaudRate" "1200"
(**) Option "StopBits" "1"
(**) Option "DataBits" "7"
(**) Option "Parity" "None"
(**) Option "Vmin" "1"
(**) Option "Vtime" "0"
(**) Option "FlowControl" "None"
(==) Mouse0: Buttons: 3
(**) Option "Emulate3Buttons" "off"
(**) Option "ZAxisMapping" "4 5"
(**) Mouse0: ZAxisMapping: buttons 4 and 5
(**) Mouse0: BaudRate: 1200
(II) Keyboard "Keyboard0" handled by legacy driver
(II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE)
(**) Option "BaudRate" "1200"
SetKbdSettings - type: 2 rate: 30 delay: 500 snumlk: 0
SetKbdSettings - Succeeded
