Re: "sync out of range" in textmode after leaving X (or in VCs)

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



--- Dennis Veatch <dveatch@woh.rr.com> wrote:
> On Saturday 07 December 2002 05:10 pm, Vern W Heesch wrote:
> > On Sat, 7 Dec 2002 13:28:25 -0800 (PST)
> >
> > "rq8ia" <rq8ia@yahoo.com> wrote:
> > > --- Dennis Veatch <dveatch@woh.rr.com> wrote:
> > > > On Saturday 07 December 2002 04:03 pm, rq8ia wrote:
> > > > > upon a cold boot, my VG800 1280x1024 panels run in textmode ok.
> > > > >
> > > > > but after starting X, my panels show a "sync out of range"
> > > > > message when i toggle to a virtual console, or, when i
> > > > > leave X.  so i blindly issue either a startx or a halt after
> > > > > leaving X.
> > > >
> > > > Check your HorizSync and VertRefresh settings in /etc/X11/XF86Config
> > > > file. Generally that error tells you these two settings (or one of
> > > > them) are beyond the capabilities of your monitor.
> > >
> > > (note: X is working fine)
> > >
> > > currently:
> > >   HorizSync  30-82
> > >   VertRefresh 50-85
> >
> > the specs for the VG800 say 30-82 and 50-75
> >
> >
> 
> Looks like VertRefresh is out of range.
>

i've tried:

(a)  VertRefresh 60-85  (worked with FX70 1024x768)
(b) VertRefresh 50-85  (Viewsonic's email suggestion)
(c)  VertRefresh 60     (my idea)
(d)  VertRefresh 50-75  (this thread)

all lead to X working properly, but
all lead to "sync out of range" in textmode when toggling from 
X to virtual consoles, or upon leaving X

immediately upon a cold power-on, the panel's 
OSD (on screen display) shows:
  Resolution: 640x480
  Frequency: H: 31.6  KHz  
             V: 60.1  Hz

then linux boots, the font becomes smaller and 
the OSD shows:
  Resolution: 1024x768
  Frequency: H: 48.4  KHz
             V: 60.1  Hz

then i login and startx with an XF86Config-4 VertRefresh 50-75, 
(X runs fine) and the OSD shows:
  Resolution: 1280x1024
  Frequency: H: 80.0  KHz
             V: 75.0  Hz

then modify XF86Config-4 to VertRefresh 60

then leave X

then startx (blindly since textmode is not working) with an 
XF86Config-4 VertRefresh 60 (X runs fine again) and 
the OSD shows:
  Resolution: 1280x1024
  Frequency: H: 64.0  KHz
             V: 60.0  Hz








__________________________________________________
Do you Yahoo!?
Yahoo! Mail Plus - Powerful. Affordable. Sign up now.
http://mailplus.yahoo.com
_______________________________________________

Newbie@XFree86.Org
*** To unsubscribe , or change message options, see:
http://XFree86.Org/mailman/listinfo/newbie

[Index of Archives]     [XFree86]     [Xfree86 Xpert]     [X.org]     [IETF Annouce]     [Security]     [Bugtraq]     [Yosemite]     [MIPS Linux]     [ARM Linux]     [Picture Sharing]     [Linux Security]     [Linux RAID]

  Powered by Linux