Your AGP module 'agpgart' is not loaded. This could be your problem as the error output was saying that the agp port could not be found (accessed, or whatever). is agpgart support built into the kernel? If so try recompiling with it as a module. Make sure the agpgart module loads before the fglrx module. Your geForce 1 may have worked fine in a PCI mode without the agpgart module, but the 9700 will need it. Hope that helps. Steve White. You can mail me off list if you like. bass.clarinet@verizon.net On Tue, 2002-12-03 at 13:59, Avnerus wrote: > Here it is. I also did lspci maybe that could help. > (note: the same motherboard worked fine on linux using a geforce1 card > and) > > > lsmod: > Module Size Used by Tainted: P > fglrx 163016 0 > ipt_MASQUERADE 2200 1 (autoclean) > iptable_nat 19928 1 (autoclean) [ipt_MASQUERADE] > ip_conntrack 21212 1 (autoclean) [ipt_MASQUERADE > iptable_nat] > autofs 13348 0 (autoclean) (unused) > 8139too 17704 1 > mii 2156 0 [8139too] > ipt_REJECT 3736 0 (autoclean) > iptable_filter 2412 1 (autoclean) > ip_tables 14840 6 [ipt_MASQUERADE iptable_nat ipt_REJECT > iptable > _filter] > CDCEther 14232 1 > acm 7872 0 (unused) > ide-scsi 10512 0 > scsi_mod 107240 1 [ide-scsi] > ide-cd 33608 0 > cdrom 33696 0 [ide-cd] > mousedev 5524 0 (unused) > keybdev 2976 0 (unused) > hid 22244 0 (unused) > input 5920 0 [mousedev keybdev hid] > usb-uhci 26188 0 (unused) > ehci-hcd 17448 0 (unused) > usbcore 77056 1 [CDCEther acm hid usb-uhci ehci-hcd] > ext3 70400 2 > jbd 52212 2 [ext3] > > > lspci: > 00:00.0 Host bridge: VIA Technologies, Inc.: Unknown device 3189 > 00:01.0 PCI bridge: VIA Technologies, Inc.: Unknown device b168 > 00:0a.0 Multimedia audio controller: Creative Labs SB Live! EMU10k1 (rev > 04) > 00:0a.1 Input device controller: Creative Labs SB Live! MIDI/Game Port > (rev 01) > 00:10.0 USB Controller: VIA Technologies, Inc. USB (rev 80) > 00:10.1 USB Controller: VIA Technologies, Inc. USB (rev 80) > 00:10.2 USB Controller: VIA Technologies, Inc. USB (rev 80) > 00:10.3 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 82) > 00:11.0 ISA bridge: VIA Technologies, Inc. VT8233A ISA Bridge > 00:11.1 IDE interface: VIA Technologies, Inc. VT82C586B PIPC Bus Master > IDE (rev > 06) > 00:13.0 Ethernet controller: Realtek Semiconductor Co., Ltd. > RTL-8139/8139C/8139 > C+ (rev 10) > 01:00.0 VGA compatible controller: ATI Technologies Inc Radeon R300 ND > [Radeon 9 > 700] > 01:00.1 Display controller: ATI Technologies Inc: Unknown device 4e64 > > > > -----Original Message----- > From: newbie-admin@XFree86.Org [mailto:newbie-admin@XFree86.Org] On > Behalf Of Steve White > Sent: Tuesday, December 03, 2002 4:22 PM > To: newbie@XFree86.Org > Subject: Re: XFree86 errors help > > With the drivers being closed source there's not much that we can do > here. It does look like your agpgart module is not loading properly. > What is the output of the command 'lsmod' (without quotes) as root? > > Steve W. > > On Tue, 2002-12-03 at 12:12, Avnerus wrote: > > Hi again, > > Well no one seems interested enough in my last post so I thought I'll > > make it simpler. > > These are the errors I get when starting X Server (ATI linux drivers): > > > > (EE) fglrx(0): [agp] unable to acquire AGP, error "xf86_ENODEV" > > (EE) fglrx(0): cannot init AGP > > > > I searched google for a possible solution for these errors and found > > nothing. > > If you want to look at my full config and log files look for my post > > from yesterday called 'Need help with radeon 9700 pro linux > drivers..." > > > > Thanks > > Avnerus > > > > > _______________________________________________ > > Newbie@XFree86.Org > *** To unsubscribe , or change message options, see: > http://XFree86.Org/mailman/listinfo/newbie > > _______________________________________________ > > Newbie@XFree86.Org > *** To unsubscribe , or change message options, see: > http://XFree86.Org/mailman/listinfo/newbie _______________________________________________ Newbie@XFree86.Org *** To unsubscribe , or change message options, see: http://XFree86.Org/mailman/listinfo/newbie
