(EE) Screen(s) found, but none have a usable configuration.Hallo Jens!
Habe zu Hause die selbe Grafikkarte und hatte das gleiche Problem wie Du.
Bei Debian 3.0 wird von XFree86 nicht mehr die Datei /etc/X11/XFree86Config
sondern die /etc/X11/XFree86Config-4 ausgelesen. Die Datei wird so viel ich
weiss nur mit xf86cfg erstellt. Das Kommando dpkg-reconfigure konfiguriert
meines Wissens nach noch die alte Config Datei was aber in deinem Fall
nichts nützt.
Hoffe konnte Dir helfen.
Renč
----- Original Message -----
From: J.Grote@mvv.de
To: newbie@XFree86.Org
Sent: Thursday, October 24, 2002 1:08 PM
Subject: (EE) Screen(s) found, but none have a usable configuration.
Hi,
I have a little problem setting up an X with debian (woody/stable).
The machine has a Matrox MGA 100 installed, and is running a Samsung 18"
Flat Panel.
here is a sniplet out of the XFree86.0.log
---snip---
(II) Setting vga for screen 0.
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/X11R6/lib/modules/libvgahw.a
(II) Module vgahw: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.4
(**) MGA(0): Depth 16, (--) framebuffer bpp 16
(==) MGA(0): RGB weight 565
(**) MGA(0): Option "UseFBDev" "true"
(II) MGA(0): Matrox HAL module not found - using builtin mode setup instead
(--) MGA(0): Chipset: "mgag100"
(==) MGA(0): Using AGP 1x mode
(**) MGA(0): Using framebuffer device
(II) Loading sub module "fbdevhw"
(II) LoadModule: "fbdevhw"
(II) Loading /usr/X11R6/lib/modules/linux/libfbdevhw.a
(II) Module fbdevhw: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 0.0.2
ABI class: XFree86 Video Driver, version 0.4
(II) UnloadModule: "mga"
(II) UnloadModule: "fbdevhw"
(II) Unloading /usr/X11R6/lib/modules/linux/libfbdevhw.a
(II) UnloadModule: "vgahw"
(II) Unloading /usr/X11R6/lib/modules/libvgahw.a
(EE) Screen(s) found, but none have a usable configuration.
---snip---
i already ran dpkg-reconfigure and tried to use different settings, but
nothing worked so far.
--snip--
Section "Monitor"
Identifier "tft"
HorizSync 30-60
VertRefresh 50-75
Option "DPMS"
EndSection
Section "Screen"
Identifier "Default Screen"
Device "Generic Video Card"
Monitor "tft"
DefaultDepth 16
SubSection "Display"
Depth 1
Modes "1280x960" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1280x960" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1280x960" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1280x960" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1280x960" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1280x960" "1024x768" "800x600" "640x480"
EndSubSection
EndSection
--snip--
I even tried setting those settings down to 640x480 with 8bits color depth,
but that did not help either.
Any help / guesses ?
mfg
Jens Grote
--
Diplom Wirtschaftsinformatiker (BA)
MVV Energie AG
Abteilung 2.23
IT Operations Services
Luisenring 49
68159 Mannheim
Tel: +49/621/290-0
http://www.mvv.de
Direkt:
Tel: +49/621/290-3243
Fax: +49/621/290-2677
Email: j.grote@mvv.de
_______________________________________________
Newbie@XFree86.Org
*** To unsubscribe , or change message options, see:
http://XFree86.Org/mailman/listinfo/newbie
