For your mouse I would try
Option "Protocol" "Auto"
or
Option "Protocol" "usb"
do not forget that *nix are case dependant...
for your graphic card, possibly the closed source Nvidia drivers might be better (see their site)
you could also attempt removing all mention of chipset and card in the device section and seing
which default X will select...
Lionel
--- Thiemo Kellner <thiemo@gmx.ch> wrote:
> Hi all,
>
> I try to set-up X-server on my debian woody. I have, though, installed
> version 4.2.1 over the standard 4.1.0 but to no avail. I pricipally have
> two problems:
> - the graphical part does not run
> - the usb mouse does not run
>
> I've got an Apollo TNT2 Vanta 16 MB graphic adaptor and a Sony
> Multiscan15sf monitor.
>
> End of /var/log/XFree86.0.log
> **
> (II) NV: driver for NVIDIA chipsets: RIVA 128, RIVA TNT,
> RIVA TNT2/TNT2 Pro, RIVA TNT2 Ultra, Vanta, Riva TNT2 M64,
> Aladdin TNT2, GeForce 256, GeForce DDR, Quadro, GeForce2 MX/MX 400,
> GeForce2 MX 100/200, GeForce2 Go, Quadro2 MXR, GeForce2 GTS/Pro,
> GeForce2 Ti, GeForce2 Ultra, Quadro2 Pro, GeForce4 MX 460,
> GeForce4 MX 440, GeForce4 MX 420, GeForce4 440 Go, GeForce4 420 Go,
> GeForce4 420 Go M32, Quadro4 500XGL, GeForce4 440 Go M64,
> Quadro4 200/400NVS, Quadro4 550XGL, Quadro4 GoGL, 0x0180, 0x0181,
> 0x0182, 0x0188, 0x018A, 0x018B, GeForce2 Integrated, 0x01F0,
> GeForce3, GeForce3 Ti 200, GeForce3 Ti 500, Quadro DCC,
> GeForce4 Ti 4600, GeForce4 Ti 4400, GeForce4 Ti 4200,
> Quadro4 900 XGL, Quadro4 750 XGL, Quadro4 700 XGL, 0x0280, 0x0281,
> 0x0288, 0x0289
> (II) Primary Device is: PCI 01:00:0
> (--) Assigning device section with no busID to primary device
> (WW) NV: Chipset "RIVATNT2" in Device section "ApolloNVidiaTNT2Vanta"
> isn't valid for this driver
> (EE) No devices detected.
>
> Fatal server error:
> no screens found
> **
>
> Part of /etc/X11/XF86Config-4
> **
> Section "ServerLayout"
> Identifier "MainLayout"
> Screen "SonyScreen"
> InputDevice "Generic Keyboard" "CoreKeyboard"
> InputDevice "Configured Mouse" "CorePointer"
> EndSection
>
> Section "Module"
> Load "GLcore"
> Load "bitmap"
> Load "dbe"
> Load "ddc"
> Load "dri"
> Load "extmod"
> Load "freetype"
> Load "glx"
> Load "int10"
> Load "pex5"
> Load "record"
> Load "speedo"
> Load "type1"
> Load "vbe"
> Load "xie"
> EndSection
>
> Section "InputDevice"
> Identifier "Generic Keyboard"
> Driver "keyboard"
> Option "CoreKeyboard"
> Option "XkbRules" "xfree86"
> Option "XkbModel" "pc104"
> Option "XkbLayout" "de_CH"
> EndSection
>
> Section "InputDevice"
> Identifier "Configured Mouse"
> Driver "mouse"
> Option "CorePointer"
> Option "Device" "/dev/input/mice"
> Option "Protocol" "autops2"
> Option "ZAxisMapping" "4 5"
> EndSection
>
> Section "Monitor"
> Identifier "SonyMultiscan15sf"
> HorizSync 31.5 - 64.3
> VertRefresh 50.0 - 100.0
> EndSection
>
> Section "Device"
> Identifier "ApolloNVidiaTNT2Vanta"
> Driver "nv"
> ChipSet "RIVATNT2"
> Card "RIVA TNT2"
> EndSection
>
> Section "Screen"
> Identifier "SonyScreen"
> Device "ApolloNVidiaTNT2Vanta"
> Monitor "SonyMultiscan15sf"
> DefaultDepth 24
> SubSection "Display"
> Depth 24
> Modes "1024x768" "800x600" "640x480"
> EndSubSection
> EndSection
>
> Section "DRI"
> Mode 0666
> EndSection
> **
>
> I'd be really grateful if somebody could help me out. Even a 'This
> graphic card is rubbish, I use xyz with this conifg.' Would be welcome.
>
> Cheers,
>
> Thiemo
>
> --
> Thiemo Kellner
> Tösstalstrasse 146
> CH-8400 Winterthur
> http://jermt.sourceforge.net
>
> _______________________________________________
>
> Newbie@XFree86.Org
> *** To unsubscribe , or change message options, see:
> http://XFree86.Org/mailman/listinfo/newbie
__________________________________________________
Do you Yahoo!?
Yahoo! News - Today's headlines
http://news.yahoo.com
_______________________________________________
Newbie@XFree86.Org
*** To unsubscribe , or change message options, see:
http://XFree86.Org/mailman/listinfo/newbie
