Hello, I am looking for help to set up X on a Sony PCG-C1XS laptop. The difficulty centers on the laptop's non-standard 8.9 inch display. I have used a number of tools, including xf86config, XF86Setup and xfree86config, to try to set it up, but in each case, the end result is a setup that believes it is dealing with a 1024x768 display, when in actuality, what I have is 1024x480. The Sony PCG-C1XS uses a NeoMagic MediaMagic 256AV chipset with 2.5M RAM. I had it working at one time with SuSE 7.x, but since I switched to Slackware 8.1, I am not able to get it working. There are a couple of web sites linked to the Linux on Laptops web site that themselves have links to XF86Config files, but these are all XFree86 3.x configuration files, not XFree86 4.x which I have on this machine. Looking through the man page for XF86Config, I don't see (or have overlooked) any mention of how to set the resolution for a non-standard display. Can you all offer me some advice on where further I could look? Here is a copy of my XF86Config as built by xf86config with the non-relevant details removed: Section "ServerLayout" Identifier "XFree86 Configured" Screen 0 "Screen0" 0 0 InputDevice "Mouse0" "CorePointer" InputDevice "Keyboard0" "CoreKeyboard" EndSection Section "Files" [snip] EndSection Section "Module" Load "record" Load "extmod" Load "dbe" Load "dri" Load "glx" Load "xtrap" Load "type1" Load "speedo" EndSection Section "InputDevice" [snip] EndSection Section "InputDevice" [snip] EndSection Section "Monitor" Identifier "Monitor0" VendorName "Monitor Vendor" ModelName "Monitor Model" EndSection Section "Device" ### Available Driver options are:- ### Values: <i>: integer, <f>: float, <bool>: "True"/"False", ### <string>: "String", <freq>: "<f> Hz/kHz/MHz" ### [arg]: arg optional #Option "NoLinear" # [<bool>] #Option "NoAccel" # [<bool>] #Option "SWcursor" # [<bool>] #Option "noMMIO" # [<bool>] #Option "internDisp" # [<bool>] #Option "externDisp" # [<bool>] #Option "LcdCenter" # [<bool>] #Option "ShadowFB" # [<bool>] #Option "NoStretch" # [<bool>] #Option "pciBurst" # [<bool>] #Option "Rotate" # [<str>] #Option "StrangeLockups" # [<bool>] #Option "DisplayHeight480" # [<bool>] #Option "progLcdModeRegs" # [<bool>] #Option "progLcdModeStretch" # [<bool>] #Option "overrideValidateMode" # [<bool>] Identifier "Card0" Driver "neomagic" VendorName "Neomagic" BoardName "NM2200" BusID "PCI:1:0:0" EndSection Section "Screen" Identifier "Screen0" Device "Card0" Monitor "Monitor0" DefaultDepth 16 SubSection "Display" Depth 1 EndSubSection SubSection "Display" Depth 4 EndSubSection SubSection "Display" Depth 8 EndSubSection SubSection "Display" Depth 15 EndSubSection SubSection "Display" Depth 16 EndSubSection SubSection "Display" Depth 24 EndSubSection EndSection I would be grateful for your help. Cheers, Sean _______________________________________________ Newbie@XFree86.Org *** To unsubscribe , or change message options, see: http://XFree86.Org/mailman/listinfo/newbie
