Probably, look into man startx it should tell you in which order it search for a config file. If my memory does not play me tricks it should be 1. whatever is specified in the command line (in case anything is) 2. XF86Config-4 in your home directory (if there is one) 3. XF86Config in your home directory (if there is one) 4. XF86Config-4 in /etc/X11 (if there is one) 5. XF86Config in /etc/X11 (if there is one) 6. etc... (/usr/X11/...) Lionel Ari Jolo <jolo@fibertel.com.ar> wrote: > I don't have a /etc/X11/XF86Config-4 but instead I've got /etc/X11/XF86Config is it the same??? > > JoloX > > On Sun, 7 Jul 2002 22:07:55 +0200 > "cHaMaY" <chamay10@yahoo.es> wrote: > > > > > do you have a /etc/X11/XF86Config-4 file? If so u should add Option "Xaa.. > > " ,the correct sintax is with option, to your graphic card device section, > > not the mouse one. > > > > chamay > > > > ----- Original Message ----- > > From: Ariel M. Jolodovsky > > To: newbie@XFree86.Org > > Sent: Saturday, July 06, 2002 9:35 PM > > Subject: Re: 2 Lines following my mouse > > > > > > Thnx but it didn't work out, when I put those line the X server didn't start > > so I commented it; > > here's my /etc/X11/XF86Config file: > > > > # File generated by xf86config. > > > > # > > # Copyright (c) 1999 by The XFree86 Project, Inc. > > # > > # Permission is hereby granted, free of charge, to any person obtaining a > > # copy of this software and associated documentation files (the "Software"), > > # to deal in the Software without restriction, including without limitation > > # the rights to use, copy, modify, merge, publish, distribute, sublicense, > > # and/or sell copies of the Software, and to permit persons to whom the > > # Software is furnished to do so, subject to the following conditions: > > # > > # The above copyright notice and this permission notice shall be included in > > # all copies or substantial portions of the Software. > > # > > # THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR > > # IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, > > # FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL > > # THE XFREE86 PROJECT BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, > > # WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF > > # OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE > > # SOFTWARE. > > # > > # Except as contained in this notice, the name of the XFree86 Project shall > > # not be used in advertising or otherwise to promote the sale, use or other > > # dealings in this Software without prior written authorization from the > > # XFree86 Project. > > # > > > > # ********************************************************************** > > # Refer to the XF86Config(4/5) man page for details about the format of > > # this file. > > # ********************************************************************** > > > > # ********************************************************************** > > # Module section -- this section is used to specify > > # which dynamically loadable modules to load. > > # ********************************************************************** > > # > > Section "Module" > > > > # This loads the DBE extension module. > > > > Load "dbe" # Double buffer extension > > > > # This loads the miscellaneous extensions module, and disables > > # initialisation of the XFree86-DGA extension within that module. > > SubSection "extmod" > > Option "omit xfree86-dga" # don't initialise the DGA extension > > EndSubSection > > > > # This loads the Type1 and FreeType font modules > > Load "type1" > > Load "freetype" > > > > # This loads the GLX module > > # Load "glx" > > > > EndSection > > > > # ********************************************************************** > > # Files section. This allows default font and rgb paths to be set > > # ********************************************************************** > > > > Section "Files" > > > > # The location of the RGB database. Note, this is the name of the > > # file minus the extension (like ".txt" or ".db"). There is normally > > # no need to change the default. > > > > RgbPath "/usr/X11R6/lib/X11/rgb" > > > > # Multiple FontPath entries are allowed (which are concatenated together), > > # as well as specifying multiple comma-separated entries in one FontPath > > # command (or a combination of both methods) > > # > > # If you don't have a floating point coprocessor and emacs, Mosaic or other > > # programs take long to start up, try moving the Type1 and Speedo directory > > # to the end of this list (or comment them out). > > # > > > > FontPath "/usr/X11R6/lib/X11/fonts/local/" > > FontPath "/usr/X11R6/lib/X11/fonts/misc/" > > FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled" > > FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled" > > FontPath "/usr/X11R6/lib/X11/fonts/Type1/" > > FontPath "/usr/X11R6/lib/X11/fonts/Speedo/" > > FontPath "/usr/X11R6/lib/X11/fonts/75dpi/" > > FontPath "/usr/X11R6/lib/X11/fonts/100dpi/" > > > > # The module search path. The default path is shown here. > > > > # ModulePath "/usr/X11R6/lib/modules" > > > > EndSection > > > > # ********************************************************************** > > # Server flags section. > > # ********************************************************************** > > > > Section "ServerFlags" > > > > # Uncomment this to cause a core dump at the spot where a signal is > > # received. This may leave the console in an unusable state, but may > > # provide a better stack trace in the core dump to aid in debugging > > > > # Option "NoTrapSignals" > > > > # Uncomment this to disable the <Crtl><Alt><BS> server abort sequence > > # This allows clients to receive this key event. > > > > # Option "DontZap" > > > > # Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching > > # sequences. This allows clients to receive these key events. > > > > # Option "Dont Zoom" > > > > # Uncomment this to disable tuning with the xvidtune client. With > > # it the client can still run and fetch card and monitor attributes, > > # but it will not be allowed to change them. If it tries it will > > # receive a protocol error. > > > > # Option "DisableVidModeExtension" > > > > # Uncomment this to enable the use of a non-local xvidtune client. > > > > # Option "AllowNonLocalXvidtune" > > > > # Uncomment this to disable dynamically modifying the input device > > # (mouse and keyboard) settings. > > > > # Option "DisableModInDev" > > > > # Uncomment this to enable the use of a non-local client to > > # change the keyboard or mouse settings (currently only xset). > > > > # Option "AllowNonLocalModInDev" > > > > EndSection > > > > # ********************************************************************** > > # Input devices > > # ********************************************************************** > > > > # ********************************************************************** > > # Core keyboard's InputDevice section > > # ********************************************************************** > > > > Section "InputDevice" > > > > Identifier "Keyboard1" > > Driver "Keyboard" > > # For most OSs the protocol can be omitted (it defaults to "Standard"). > > # When using XQUEUE (only for SVR3 and SVR4, but not Solaris), > > # uncomment the following line. > > > > # Option "Protocol" "Xqueue" > > > > Option "AutoRepeat" "500 30" > > > > # Specify which keyboard LEDs can be user-controlled (eg, with xset(1)) > > # Option "Xleds" "1 2 3" > > > > # Option "LeftAlt" "Meta" > > # Option "RightAlt" "ModeShift" > > > > # To customise the XKB settings to suit your keyboard, modify the > > # lines below (which are the defaults). For example, for a non-U.S. > > # keyboard, you will probably want to use: > > # Option "XkbModel" "pc102" > > # If you have a US Microsoft Natural keyboard, you can use: > > # Option "XkbModel" "microsoft" > > # > > # Then to change the language, change the Layout setting. > > # For example, a german layout can be obtained with: > === message truncated === __________________________________________________ Do You Yahoo!? Sign up for SBC Yahoo! Dial - First Month Free http://sbc.yahoo.com _______________________________________________ Newbie@XFree86.Org *** To unsubscribe , or change message options, see: http://XFree86.Org/mailman/listinfo/newbie
