This is a multi-part message in MIME format. ------=_NextPart_000_0005_01C204E0.9ADF3520 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Hi to everybody, I installed XFree86 (Vers. 4.2.0) together with Suse Linux 7.2 on my Laptop which is a Movita Fuego 215. I cannot get the xserver to run correctly e.g. I cannot see anything on my display. My laptop is equipped with a Silicon-motion Lynx3D graphic adapter (SM820) on a 14" TFT display. I generated the config-file with "XFree86 -configure" and had a look at the resulting file. For my understanding the config-file is ok. I copied the new configuration-file from my home-directory to /etc/X11, under the name "XF86Config". When I start the X-Server with "XFree86 -xf86config /etc/X11/XF86Config" , I end up (sometimes) with a total black screen ; in the background something is still working (indicated by disk-access) but the key's CNTRL-ALT-BS or CNTRL-ALT-+ or CNTRL-ALT-"-" do not work. I have to switch-off the Laptop ! Switching from internal- to external monitor, an back again to internal (via hotkey), as advised in some FAQ's, does not solve the problem. s Also switching to a console with CNTRL-ALT-F2 and back to graphic with ALT-F7 does not work. Sometimes I get a "gray"-background (like a checkerboard) and a BIG block-mouse-cursor (aprox. 1 X 1 cm !). When I move the mouse something happens, but after a few moves the display changes to total black an I have to switch off the laptop. The same behavior happens, when I use an external standard CRT monitor. I played around with some Silicon-Motion Option-switches like : Option "NoAccel" "True" and Option "UseBIOS" "True" , but with no progress. I attached the XF86Config- and XFree86.log files to the e-mail. Who can help me please !!?? bets regards Don Schultz ------=_NextPart_000_0005_01C204E0.9ADF3520 Content-Type: application/octet-stream; name="XFree86.log" Content-Transfer-Encoding: quoted-printable Content-Disposition: attachment; filename="XFree86.log" =0A= XFree86 Version 4.2.0 / X Window System=0A= (protocol Version 11, revision 0, vendor release 6600)=0A= Release Date: 23 January 2002=0A= If the server is older than 6-12 months, or if your card is=0A= newer than the above date, look for a newer version before=0A= reporting problems. (See http://www.XFree86.Org/)=0A= Build Operating System: SuSE Linux [ELF] SuSE=0A= Module Loader present=0A= Markers: (--) probed, (**) from config file, (=3D=3D) default setting,=0A= (++) from command line, (!!) notice, (II) informational,=0A= (WW) warning, (EE) error, (NI) not implemented, (??) unknown.=0A= (=3D=3D) Log file: "/var/log/XFree86.0.log", Time: Sun May 26 16:45:16 = 2002=0A= (++) Using config file: "/etc/X11/XF86Config"=0A= (=3D=3D) ServerLayout "Simple Layout"=0A= (**) |-->Screen "Screen 1" (0)=0A= (**) | |-->Monitor "TFT"=0A= (**) | |-->Device "Laptop_SMI"=0A= (**) |-->Input Device "Mouse1"=0A= (**) |-->Input Device "Keyboard1"=0A= (**) Option "AutoRepeat" "500 30"=0A= (**) Option "XkbRules" "xfree86"=0A= (**) XKB: rules: "xfree86"=0A= (**) Option "XkbModel" "pc101"=0A= (**) XKB: model: "pc101"=0A= (**) Option "XkbLayout" "de"=0A= (**) XKB: layout: "de"=0A= (=3D=3D) Keyboard: CustomKeycode disabled=0A= (**) FontPath set to = "/usr/X11R6/lib/X11/fonts/local/,/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R= 6/lib/X11/fonts/75dpi/:unscaled,/usr/X11R6/lib/X11/fonts/100dpi/:unscaled= ,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X1= 1R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/"=0A= (**) RgbPath set to "/usr/X11R6/lib/X11/rgb"=0A= (=3D=3D) ModulePath set to "/usr/X11R6/lib/modules"=0A= (--) using VT number 7=0A= =0A= (II) Open APM successful=0A= (II) Module ABI versions:=0A= XFree86 ANSI C Emulation: 0.1=0A= XFree86 Video Driver: 0.5=0A= XFree86 XInput driver : 0.3=0A= XFree86 Server Extension : 0.1=0A= XFree86 Font Renderer : 0.3=0A= (II) Loader running on linux=0A= (II) LoadModule: "bitmap"=0A= (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a=0A= (II) Module bitmap: vendor=3D"The XFree86 Project"=0A= compiled for 4.2.0, module version =3D 1.0.0=0A= Module class: XFree86 Font Renderer=0A= ABI class: XFree86 Font Renderer, version 0.3=0A= (II) Loading font Bitmap=0A= (II) LoadModule: "pcidata"=0A= (II) Loading /usr/X11R6/lib/modules/libpcidata.a=0A= (II) Module pcidata: vendor=3D"The XFree86 Project"=0A= compiled for 4.2.0, module version =3D 0.1.0=0A= ABI class: XFree86 Video Driver, version 0.5=0A= (II) PCI: Probing config type using method 1=0A= (II) PCI: Config type is 1=0A= (II) PCI: stages =3D 0x03, oldVal1 =3D 0x80003b58, mode1Res1 =3D = 0x80000000=0A= (II) PCI: PCI scan (all values are in hex)=0A= (II) PCI: 00:00:0: chip 8086,7192 card 0000,0000 rev 03 class 06,00,00 = hdr 00=0A= (II) PCI: 00:05:0: chip 126f,0820 card 126f,0820 rev a3 class 03,00,00 = hdr 00=0A= (II) PCI: 00:07:0: chip 8086,7110 card 0000,0000 rev 02 class 06,80,00 = hdr 80=0A= (II) PCI: 00:07:1: chip 8086,7111 card 0000,0000 rev 01 class 01,01,80 = hdr 00=0A= (II) PCI: 00:07:2: chip 8086,7112 card 0000,0000 rev 01 class 0c,03,00 = hdr 00=0A= (II) PCI: 00:07:3: chip 8086,7113 card 0000,0000 rev 02 class 06,80,00 = hdr 00=0A= (II) PCI: 00:0a:0: chip 1217,6872 card 0201,0000 rev 05 class 06,07,00 = hdr 02=0A= (II) PCI: 00:0e:0: chip 125d,1968 card 125d,0001 rev 00 class 04,01,00 = hdr 00=0A= (II) PCI: 00:10:0: chip 11c1,0442 card 149f,0440 rev 01 class 07,80,00 = hdr 00=0A= (II) PCI: 01:00:0: chip 1011,0019 card 13d1,ab01 rev 41 class 02,00,00 = hdr 00=0A= (II) PCI: End of PCI scan=0A= (II) LoadModule: "scanpci"=0A= (II) Loading /usr/X11R6/lib/modules/libscanpci.a=0A= (II) Module scanpci: vendor=3D"The XFree86 Project"=0A= compiled for 4.2.0, module version =3D 0.1.0=0A= ABI class: XFree86 Video Driver, version 0.5=0A= (II) UnloadModule: "scanpci"=0A= (II) Unloading /usr/X11R6/lib/modules/libscanpci.a=0A= (II) Host-to-PCI bridge:=0A= (II) Bus 0: bridge is at (0:0:0), (-1,0,0), BCTRL: 0x08 (VGA_EN is set)=0A= (II) Bus 0 I/O range:=0A= [0] -1 0x00000000 - 0x0000ffff (0x10000) IX[B]=0A= (II) Bus 0 non-prefetchable memory range:=0A= [0] -1 0x00000000 - 0xffffffff (0x0) MX[B]=0A= (II) Bus 0 prefetchable memory range:=0A= [0] -1 0x00000000 - 0xffffffff (0x0) MX[B]=0A= (II) Host-to-PCI bridge:=0A= (II) Bus 1: bridge is at (0:0:0), (-1,1,0), BCTRL: 0x00 (VGA_EN is = cleared)=0A= (II) Bus 1 I/O range:=0A= [0] -1 0x00000000 - 0x0000ffff (0x10000) IX[B]=0A= (II) Bus 1 non-prefetchable memory range:=0A= [0] -1 0x00000000 - 0xffffffff (0x0) MX[B]=0A= (II) Bus 1 prefetchable memory range:=0A= [0] -1 0x00000000 - 0xffffffff (0x0) MX[B]=0A= (--) PCI:*(0:5:0) Silicon Motion Inc. Lynx3D rev 163, Mem @ 0xc0000000/24=0A= (II) Addressable bus resource ranges are=0A= [0] -1 0x00000000 - 0xffffffff (0x0) MX[B]=0A= [1] -1 0x00000000 - 0x0000ffff (0x10000) IX[B]=0A= (II) OS-reported resource ranges:=0A= [0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)=0A= [1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)=0A= [2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]=0A= [3] -1 0x000c0000 - 0x000effff (0x30000) MX[B]=0A= [4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]=0A= [5] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]=0A= [6] -1 0x00000000 - 0x000000ff (0x100) IX[B]=0A= (II) Active PCI resource ranges:=0A= [0] -1 0x60080000 - 0x60080000 (0x1) MX[B]=0A= [1] -1 0x600c0000 - 0x600c0000 (0x1) MX[B]=0A= [2] -1 0x24000000 - 0x240000ff (0x100) MX[B]=0A= [3] -1 0x20000000 - 0x23ffffff (0x4000000) MX[B]=0A= [4] -1 0xc0000000 - 0xc0ffffff (0x1000000) MX[B](B)=0A= [5] -1 0x00000200 - 0x00000200 (0x1) IX[B]=0A= [6] -1 0x00003200 - 0x000032ff (0x100) IX[B]=0A= [7] -1 0x00003100 - 0x00003107 (0x8) IX[B]=0A= [8] -1 0x00003000 - 0x000030ff (0x100) IX[B]=0A= [9] -1 0x00001200 - 0x0000121f (0x20) IX[B]=0A= [10] -1 0x00001100 - 0x0000110f (0x10) IX[B]=0A= (II) Active PCI resource ranges after removing overlaps:=0A= [0] -1 0x60080000 - 0x60080000 (0x1) MX[B]=0A= [1] -1 0x600c0000 - 0x600c0000 (0x1) MX[B]=0A= [2] -1 0x24000000 - 0x240000ff (0x100) MX[B]=0A= [3] -1 0x20000000 - 0x23ffffff (0x4000000) MX[B]=0A= [4] -1 0xc0000000 - 0xc0ffffff (0x1000000) MX[B](B)=0A= [5] -1 0x00000200 - 0x00000200 (0x1) IX[B]=0A= [6] -1 0x00003200 - 0x000032ff (0x100) IX[B]=0A= [7] -1 0x00003100 - 0x00003107 (0x8) IX[B]=0A= [8] -1 0x00003000 - 0x000030ff (0x100) IX[B]=0A= [9] -1 0x00001200 - 0x0000121f (0x20) IX[B]=0A= [10] -1 0x00001100 - 0x0000110f (0x10) IX[B]=0A= (II) OS-reported resource ranges after removing overlaps with PCI:=0A= [0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)=0A= [1] -1 0x00100000 - 0x1fffffff (0x1ff00000) MX[B]E(B)=0A= [2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]=0A= [3] -1 0x000c0000 - 0x000effff (0x30000) MX[B]=0A= [4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]=0A= [5] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]=0A= [6] -1 0x00000000 - 0x000000ff (0x100) IX[B]=0A= (II) All system resource ranges:=0A= [0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)=0A= [1] -1 0x00100000 - 0x1fffffff (0x1ff00000) MX[B]E(B)=0A= [2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]=0A= [3] -1 0x000c0000 - 0x000effff (0x30000) MX[B]=0A= [4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]=0A= [5] -1 0x60080000 - 0x60080000 (0x1) MX[B]=0A= [6] -1 0x600c0000 - 0x600c0000 (0x1) MX[B]=0A= [7] -1 0x24000000 - 0x240000ff (0x100) MX[B]=0A= [8] -1 0x20000000 - 0x23ffffff (0x4000000) MX[B]=0A= [9] -1 0xc0000000 - 0xc0ffffff (0x1000000) MX[B](B)=0A= [10] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]=0A= [11] -1 0x00000000 - 0x000000ff (0x100) IX[B]=0A= [12] -1 0x00000200 - 0x00000200 (0x1) IX[B]=0A= [13] -1 0x00003200 - 0x000032ff (0x100) IX[B]=0A= [14] -1 0x00003100 - 0x00003107 (0x8) IX[B]=0A= [15] -1 0x00003000 - 0x000030ff (0x100) IX[B]=0A= [16] -1 0x00001200 - 0x0000121f (0x20) IX[B]=0A= [17] -1 0x00001100 - 0x0000110f (0x10) IX[B]=0A= (II) LoadModule: "dbe"=0A= (II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a=0A= (II) Module dbe: vendor=3D"The XFree86 Project"=0A= compiled for 4.2.0, module version =3D 1.0.0=0A= Module class: XFree86 Server Extension=0A= ABI class: XFree86 Server Extension, version 0.1=0A= (II) Loading extension DOUBLE-BUFFER=0A= (II) LoadModule: "extmod"=0A= (II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a=0A= (II) Module extmod: vendor=3D"The XFree86 Project"=0A= compiled for 4.2.0, module version =3D 1.0.0=0A= Module class: XFree86 Server Extension=0A= ABI class: XFree86 Server Extension, version 0.1=0A= (II) Loading extension SHAPE=0A= (II) Loading extension MIT-SUNDRY-NONSTANDARD=0A= (II) Loading extension BIG-REQUESTS=0A= (II) Loading extension SYNC=0A= (II) Loading extension MIT-SCREEN-SAVER=0A= (II) Loading extension XC-MISC=0A= (II) Loading extension XFree86-VidModeExtension=0A= (II) Loading extension XFree86-Misc=0A= (II) Loading extension DPMS=0A= (II) Loading extension FontCache=0A= (II) Loading extension TOG-CUP=0A= (II) Loading extension Extended-Visual-Information=0A= (II) Loading extension XVideo=0A= (II) Loading extension XVideo-MotionCompensation=0A= (II) LoadModule: "type1"=0A= (II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a=0A= (II) Module type1: vendor=3D"The XFree86 Project"=0A= compiled for 4.2.0, module version =3D 1.0.1=0A= Module class: XFree86 Font Renderer=0A= ABI class: XFree86 Font Renderer, version 0.3=0A= (II) Loading font Type1=0A= (II) Loading font CID=0A= (II) LoadModule: "freetype"=0A= (II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.a=0A= (II) Module freetype: vendor=3D"The XFree86 Project"=0A= compiled for 4.2.0, module version =3D 1.1.10=0A= Module class: XFree86 Font Renderer=0A= ABI class: XFree86 Font Renderer, version 0.3=0A= (II) Loading font FreeType=0A= (II) LoadModule: "siliconmotion"=0A= (II) Loading /usr/X11R6/lib/modules/drivers/siliconmotion_drv.o=0A= (II) Module siliconmotion: vendor=3D"The XFree86 Project"=0A= compiled for 4.2.0, module version =3D 1.3.1=0A= Module class: XFree86 Video Driver=0A= ABI class: XFree86 Video Driver, version 0.5=0A= (II) LoadModule: "mouse"=0A= (II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o=0A= (II) Module mouse: vendor=3D"The XFree86 Project"=0A= compiled for 4.2.0, module version =3D 1.0.0=0A= Module class: XFree86 XInput Driver=0A= ABI class: XFree86 XInput driver, version 0.3=0A= (II) Silicon Motion: driver (version 1.3.1) for Silicon Motion Lynx = chipsets:=0A= Lynx, LynxE, Lynx3D, LynxEM, LynxEM+, Lynx3DM=0A= (II) Primary Device is: PCI 00:05:0=0A= (--) Assigning device section with no busID to primary device=0A= (--) Chipset Lynx3D found=0A= (II) resource ranges after xf86ClaimFixedResources() call:=0A= [0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)=0A= [1] -1 0x00100000 - 0x1fffffff (0x1ff00000) MX[B]E(B)=0A= [2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]=0A= [3] -1 0x000c0000 - 0x000effff (0x30000) MX[B]=0A= [4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]=0A= [5] -1 0x60080000 - 0x60080000 (0x1) MX[B]=0A= [6] -1 0x600c0000 - 0x600c0000 (0x1) MX[B]=0A= [7] -1 0x24000000 - 0x240000ff (0x100) MX[B]=0A= [8] -1 0x20000000 - 0x23ffffff (0x4000000) MX[B]=0A= [9] -1 0xc0000000 - 0xc0ffffff (0x1000000) MX[B](B)=0A= [10] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]=0A= [11] -1 0x00000000 - 0x000000ff (0x100) IX[B]=0A= [12] -1 0x00000200 - 0x00000200 (0x1) IX[B]=0A= [13] -1 0x00003200 - 0x000032ff (0x100) IX[B]=0A= [14] -1 0x00003100 - 0x00003107 (0x8) IX[B]=0A= [15] -1 0x00003000 - 0x000030ff (0x100) IX[B]=0A= [16] -1 0x00001200 - 0x0000121f (0x20) IX[B]=0A= [17] -1 0x00001100 - 0x0000110f (0x10) IX[B]=0A= (II) resource ranges after probing:=0A= [0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)=0A= [1] -1 0x00100000 - 0x1fffffff (0x1ff00000) MX[B]E(B)=0A= [2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]=0A= [3] -1 0x000c0000 - 0x000effff (0x30000) MX[B]=0A= [4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]=0A= [5] -1 0x60080000 - 0x60080000 (0x1) MX[B]=0A= [6] -1 0x600c0000 - 0x600c0000 (0x1) MX[B]=0A= [7] -1 0x24000000 - 0x240000ff (0x100) MX[B]=0A= [8] -1 0x20000000 - 0x23ffffff (0x4000000) MX[B]=0A= [9] -1 0xc0000000 - 0xc0ffffff (0x1000000) MX[B](B)=0A= [10] 0 0x000a0000 - 0x000affff (0x10000) MS[B]=0A= [11] 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]=0A= [12] 0 0x000b8000 - 0x000bffff (0x8000) MS[B]=0A= [13] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]=0A= [14] -1 0x00000000 - 0x000000ff (0x100) IX[B]=0A= [15] -1 0x00000200 - 0x00000200 (0x1) IX[B]=0A= [16] -1 0x00003200 - 0x000032ff (0x100) IX[B]=0A= [17] -1 0x00003100 - 0x00003107 (0x8) IX[B]=0A= [18] -1 0x00003000 - 0x000030ff (0x100) IX[B]=0A= [19] -1 0x00001200 - 0x0000121f (0x20) IX[B]=0A= [20] -1 0x00001100 - 0x0000110f (0x10) IX[B]=0A= [21] 0 0x000003b0 - 0x000003bb (0xc) IS[B]=0A= [22] 0 0x000003c0 - 0x000003df (0x20) IS[B]=0A= (II) Setting vga for screen 0.=0A= (II) Loading sub module "vgahw"=0A= (II) LoadModule: "vgahw"=0A= (II) Loading /usr/X11R6/lib/modules/libvgahw.a=0A= (II) Module vgahw: vendor=3D"The XFree86 Project"=0A= compiled for 4.2.0, module version =3D 0.1.0=0A= ABI class: XFree86 Video Driver, version 0.5=0A= (**) Silicon Motion(0): Depth 8, (--) framebuffer bpp 8=0A= (=3D=3D) Silicon Motion(0): Default visual is PseudoColor=0A= (=3D=3D) Silicon Motion(0): Using Hardware Cursor=0A= (II) Loading sub module "vbe"=0A= (II) LoadModule: "vbe"=0A= (II) Loading /usr/X11R6/lib/modules/libvbe.a=0A= (II) Module vbe: vendor=3D"The XFree86 Project"=0A= compiled for 4.2.0, module version =3D 1.0.0=0A= ABI class: XFree86 Video Driver, version 0.5=0A= (II) Loading sub module "int10"=0A= (II) LoadModule: "int10"=0A= (II) Loading /usr/X11R6/lib/modules/linux/libint10.a=0A= (II) Module int10: vendor=3D"The XFree86 Project"=0A= compiled for 4.2.0, module version =3D 1.0.0=0A= ABI class: XFree86 Video Driver, version 0.5=0A= (II) Silicon Motion(0): initializing int10=0A= (II) Silicon Motion(0): Primary V_BIOS segment is: 0xc000=0A= (II) Silicon Motion(0): VESA BIOS detected=0A= (II) Silicon Motion(0): VESA VBE Version 2.0=0A= (II) Silicon Motion(0): VESA VBE Total Mem: 6656 kB=0A= (II) Silicon Motion(0): VESA VBE OEM: Silicon Motion SM820 VGA BIOS=0A= (II) Silicon Motion(0): VESA VBE OEM Software Rev: 2.0=0A= (II) Silicon Motion(0): VESA VBE OEM Vendor: SM820=0A= (II) Silicon Motion(0): VESA VBE OEM Product: SM820=0A= (II) Silicon Motion(0): VESA VBE OEM Product Rev: =0A= (--) Silicon Motion(0): Chipset: "Lynx3D"=0A= (II) Silicon Motion(0): Cursor Offset: FFFFFC00 Reserved: FFFFF800=0A= (II) Silicon Motion(0): OFF Panel Size =3D 1024x768=0A= (II) Loading sub module "i2c"=0A= (II) LoadModule: "i2c"=0A= (II) Loading /usr/X11R6/lib/modules/libi2c.a=0A= (II) Module i2c: vendor=3D"The XFree86 Project"=0A= compiled for 4.2.0, module version =3D 1.2.0=0A= ABI class: XFree86 Video Driver, version 0.5=0A= (II) Silicon Motion(0): I2C bus "I2C bus" initialized.=0A= (II) Loading sub module "ddc"=0A= (II) LoadModule: "ddc"=0A= (II) Loading /usr/X11R6/lib/modules/libddc.a=0A= (II) Module ddc: vendor=3D"The XFree86 Project"=0A= compiled for 4.2.0, module version =3D 1.0.0=0A= ABI class: XFree86 Video Driver, version 0.5=0A= (II) Loading sub module "ddc"=0A= (II) LoadModule: "ddc"=0A= (II) Reloading /usr/X11R6/lib/modules/libddc.a=0A= (II) Silicon Motion(0): VESA VBE DDC supported=0A= (II) Silicon Motion(0): VESA VBE DDC Level 2=0A= (II) Silicon Motion(0): VESA VBE DDC transfer in appr. 1 sec.=0A= (II) Silicon Motion(0): VESA VBE DDC read successfully=0A= (II) Silicon Motion(0): Manufacturer: SNY Model: 570 Serial#: 1381652=0A= (II) Silicon Motion(0): Year: 1997 Week: 35=0A= (II) Silicon Motion(0): EDID Version: 1.1=0A= (II) Silicon Motion(0): Analog Display Input, Input Voltage Level: = 0.700/0.300 V=0A= (II) Silicon Motion(0): Sync: Separate Composite SyncOnGreen=0A= (II) Silicon Motion(0): Max H-Image Size [cm]: horiz.: 32 vert.: 24=0A= (II) Silicon Motion(0): Gamma: 2.86=0A= (II) Silicon Motion(0): DPMS capabilities: StandBy Suspend Off; = RGB/Color Display=0A= (II) Silicon Motion(0): redX: 0.626 redY: 0.340 greenX: 0.280 greenY: = 0.595=0A= (II) Silicon Motion(0): blueX: 0.155 blueY: 0.070 whiteX: 0.283 = whiteY: 0.298=0A= (II) Silicon Motion(0): Supported VESA Video Modes:=0A= (II) Silicon Motion(0): 720x400@70Hz=0A= (II) Silicon Motion(0): 720x400@88Hz=0A= (II) Silicon Motion(0): 640x480@60Hz=0A= (II) Silicon Motion(0): 640x480@67Hz=0A= (II) Silicon Motion(0): 640x480@72Hz=0A= (II) Silicon Motion(0): 640x480@75Hz=0A= (II) Silicon Motion(0): 800x600@56Hz=0A= (II) Silicon Motion(0): 800x600@60Hz=0A= (II) Silicon Motion(0): 800x600@72Hz=0A= (II) Silicon Motion(0): 800x600@75Hz=0A= (II) Silicon Motion(0): 832x624@75Hz=0A= (II) Silicon Motion(0): 1024x768@87Hz (interlaced)=0A= (II) Silicon Motion(0): 1024x768@60Hz=0A= (II) Silicon Motion(0): 1024x768@70Hz=0A= (II) Silicon Motion(0): 1024x768@75Hz=0A= (II) Silicon Motion(0): 1152x870@75Hz=0A= (II) Silicon Motion(0): Manufacturer's mask: 0=0A= (II) Silicon Motion(0): Supported Future Video Modes:=0A= (II) Silicon Motion(0): #0: hsize: 800 vsize 600 refresh: 85 vid: = 22853=0A= (II) Silicon Motion(0): #1: hsize: 1024 vsize 768 refresh: 85 vid: = 22881=0A= (II) Silicon Motion(0): Supported additional Video Mode:=0A= (II) Silicon Motion(0): clock: 110.5 MHz Image Size: 312 x 234 mm=0A= (II) Silicon Motion(0): h_active: 1280 h_sync: 1328 h_sync_end 1520 = h_blank_end 1728 h_border: 0=0A= (II) Silicon Motion(0): v_active: 1024 v_sync: 1026 v_sync_end 1030 = v_blanking: 1066 v_border: 0=0A= (II) Silicon Motion(0): Supported additional Video Mode:=0A= (II) Silicon Motion(0): clock: 80.0 MHz Image Size: 312 x 234 mm=0A= (II) Silicon Motion(0): h_active: 1024 h_sync: 1056 h_sync_end 1152 = h_blank_end 1328 h_border: 0=0A= (II) Silicon Motion(0): v_active: 768 v_sync: 771 v_sync_end 774 = v_blanking: 804 v_border: 0=0A= (II) Silicon Motion(0): Supported additional Video Mode:=0A= (II) Silicon Motion(0): clock: 25.2 MHz Image Size: 312 x 234 mm=0A= (II) Silicon Motion(0): h_active: 640 h_sync: 656 h_sync_end 752 = h_blank_end 800 h_border: 0=0A= (II) Silicon Motion(0): v_active: 480 v_sync: 490 v_sync_end 492 = v_blanking: 525 v_border: 0=0A= (II) Silicon Motion(0): Supported additional Video Mode:=0A= (II) Silicon Motion(0): clock: 25.2 MHz Image Size: 312 x 234 mm=0A= (II) Silicon Motion(0): h_active: 640 h_sync: 656 h_sync_end 752 = h_blank_end 800 h_border: 0=0A= (II) Silicon Motion(0): v_active: 480 v_sync: 490 v_sync_end 492 = v_blanking: 525 v_border: 0=0A= (=3D=3D) Silicon Motion(0): Using gamma correction (1.0, 1.0, 1.0)=0A= (--) Silicon Motion(0): videoram: 6656kB=0A= (--) Silicon Motion(0): Detected current MCLK value of 70.909 MHz=0A= (II) Silicon Motion(0): TFT: Using hsync range of 31.50-48.50 kHz=0A= (II) Silicon Motion(0): TFT: Using vrefresh range of 50.00-90.00 Hz=0A= (II) Silicon Motion(0): Clock range: 20.00 to 135.00 MHz=0A= (II) Silicon Motion(0): Mode: 640x350 8-bpp, 85.079948Hz=0A= (II) Silicon Motion(0): Not using default mode "320x175" (bad mode = clock/interlace/doublescan)=0A= (II) Silicon Motion(0): Mode: 640x400 8-bpp, 85.079948Hz=0A= (II) Silicon Motion(0): Not using default mode "320x200" (bad mode = clock/interlace/doublescan)=0A= (II) Silicon Motion(0): Mode: 720x400 8-bpp, 85.038902Hz=0A= (II) Silicon Motion(0): Not using default mode "360x200" (bad mode = clock/interlace/doublescan)=0A= (II) Silicon Motion(0): Mode: 640x480 8-bpp, 60.000000Hz=0A= (II) Silicon Motion(0): Not using default mode "320x240" (bad mode = clock/interlace/doublescan)=0A= (II) Silicon Motion(0): Mode: 640x480 8-bpp, 72.808800Hz=0A= (II) Silicon Motion(0): Not using default mode "320x240" (bad mode = clock/interlace/doublescan)=0A= (II) Silicon Motion(0): Mode: 640x480 8-bpp, 75.000000Hz=0A= (II) Silicon Motion(0): Not using default mode "320x240" (bad mode = clock/interlace/doublescan)=0A= (II) Silicon Motion(0): Mode: 640x480 8-bpp, 85.008308Hz=0A= (II) Silicon Motion(0): Not using default mode "320x240" (bad mode = clock/interlace/doublescan)=0A= (II) Silicon Motion(0): Mode: 800x600 8-bpp, 56.250000Hz=0A= (II) Silicon Motion(0): Not using default mode "400x300" (bad mode = clock/interlace/doublescan)=0A= (II) Silicon Motion(0): Mode: 800x600 8-bpp, 60.316540Hz=0A= (II) Silicon Motion(0): Not using default mode "400x300" (bad mode = clock/interlace/doublescan)=0A= (II) Silicon Motion(0): Mode: 800x600 8-bpp, 72.187569Hz=0A= (II) Silicon Motion(0): Not using default mode "400x300" (bad mode = clock/interlace/doublescan)=0A= (II) Silicon Motion(0): Mode: 800x600 8-bpp, 75.000000Hz=0A= (II) Silicon Motion(0): Not using default mode "400x300" (bad mode = clock/interlace/doublescan)=0A= (II) Silicon Motion(0): Mode: 800x600 8-bpp, 85.136887Hz=0A= (II) Silicon Motion(0): Not using default mode "800x600" (hsync out of = range)=0A= (II) Silicon Motion(0): Not using default mode "400x300" (bad mode = clock/interlace/doublescan)=0A= (II) Silicon Motion(0): Not using default mode "1024x768" (bad mode = clock/interlace/doublescan)=0A= (II) Silicon Motion(0): Not using default mode "512x384" (bad mode = clock/interlace/doublescan)=0A= (II) Silicon Motion(0): Mode: 1024x768 8-bpp, 60.003841Hz=0A= (II) Silicon Motion(0): Not using default mode "512x384" (bad mode = clock/interlace/doublescan)=0A= (II) Silicon Motion(0): Mode: 1024x768 8-bpp, 70.069359Hz=0A= (II) Silicon Motion(0): Not using default mode "1024x768" (hsync out of = range)=0A= (II) Silicon Motion(0): Not using default mode "512x384" (bad mode = clock/interlace/doublescan)=0A= (II) Silicon Motion(0): Mode: 1024x768 8-bpp, 75.076218Hz=0A= (II) Silicon Motion(0): Not using default mode "1024x768" (hsync out of = range)=0A= (II) Silicon Motion(0): Not using default mode "512x384" (bad mode = clock/interlace/doublescan)=0A= (II) Silicon Motion(0): Mode: 1024x768 8-bpp, 84.996689Hz=0A= (II) Silicon Motion(0): Not using default mode "1024x768" (hsync out of = range)=0A= (II) Silicon Motion(0): Not using default mode "512x384" (bad mode = clock/interlace/doublescan)=0A= (II) Silicon Motion(0): Mode: 1152x864 8-bpp, 75.000000Hz=0A= (II) Silicon Motion(0): Not using default mode "1152x864" (hsync out of = range)=0A= (II) Silicon Motion(0): Not using default mode "576x432" (bad mode = clock/interlace/doublescan)=0A= (II) Silicon Motion(0): Mode: 1280x960 8-bpp, 60.000000Hz=0A= (II) Silicon Motion(0): Not using default mode "1280x960" (hsync out of = range)=0A= (II) Silicon Motion(0): Not using default mode "640x480" (bad mode = clock/interlace/doublescan)=0A= (II) Silicon Motion(0): Not using default mode "1280x960" (bad mode = clock/interlace/doublescan)=0A= (II) Silicon Motion(0): Not using default mode "640x480" (bad mode = clock/interlace/doublescan)=0A= (II) Silicon Motion(0): Mode: 1280x1024 8-bpp, 60.019741Hz=0A= (II) Silicon Motion(0): Not using default mode "1280x1024" (hsync out of = range)=0A= (II) Silicon Motion(0): Not using default mode "640x512" (bad mode = clock/interlace/doublescan)=0A= (II) Silicon Motion(0): Mode: 1280x1024 8-bpp, 75.024673Hz=0A= (II) Silicon Motion(0): Not using default mode "1280x1024" (hsync out of = range)=0A= (II) Silicon Motion(0): Not using default mode "640x512" (bad mode = clock/interlace/doublescan)=0A= (II) Silicon Motion(0): Not using default mode "1280x1024" (bad mode = clock/interlace/doublescan)=0A= (II) Silicon Motion(0): Not using default mode "640x512" (bad mode = clock/interlace/doublescan)=0A= (II) Silicon Motion(0): Not using default mode "1600x1200" (bad mode = clock/interlace/doublescan)=0A= (II) Silicon Motion(0): Not using default mode "800x600" (bad mode = clock/interlace/doublescan)=0A= (II) Silicon Motion(0): Not using default mode "1600x1200" (bad mode = clock/interlace/doublescan)=0A= (II) Silicon Motion(0): Not using default mode "800x600" (bad mode = clock/interlace/doublescan)=0A= (II) Silicon Motion(0): Not using default mode "1600x1200" (bad mode = clock/interlace/doublescan)=0A= (II) Silicon Motion(0): Not using default mode "800x600" (bad mode = clock/interlace/doublescan)=0A= (II) Silicon Motion(0): Not using default mode "1600x1200" (bad mode = clock/interlace/doublescan)=0A= (II) Silicon Motion(0): Not using default mode "800x600" (bad mode = clock/interlace/doublescan)=0A= (II) Silicon Motion(0): Not using default mode "1600x1200" (bad mode = clock/interlace/doublescan)=0A= (II) Silicon Motion(0): Not using default mode "800x600" (bad mode = clock/interlace/doublescan)=0A= (II) Silicon Motion(0): Not using default mode "1792x1344" (bad mode = clock/interlace/doublescan)=0A= (II) Silicon Motion(0): Not using default mode "896x672" (bad mode = clock/interlace/doublescan)=0A= (II) Silicon Motion(0): Not using default mode "1792x1344" (bad mode = clock/interlace/doublescan)=0A= (II) Silicon Motion(0): Not using default mode "896x672" (bad mode = clock/interlace/doublescan)=0A= (II) Silicon Motion(0): Not using default mode "1856x1392" (bad mode = clock/interlace/doublescan)=0A= (II) Silicon Motion(0): Not using default mode "928x696" (bad mode = clock/interlace/doublescan)=0A= (II) Silicon Motion(0): Not using default mode "1856x1392" (bad mode = clock/interlace/doublescan)=0A= (II) Silicon Motion(0): Not using default mode "928x696" (bad mode = clock/interlace/doublescan)=0A= (II) Silicon Motion(0): Not using default mode "1920x1440" (bad mode = clock/interlace/doublescan)=0A= (II) Silicon Motion(0): Not using default mode "960x720" (bad mode = clock/interlace/doublescan)=0A= (II) Silicon Motion(0): Not using default mode "1920x1440" (bad mode = clock/interlace/doublescan)=0A= (II) Silicon Motion(0): Not using default mode "960x720" (bad mode = clock/interlace/doublescan)=0A= (II) Silicon Motion(0): Mode: 832x624 8-bpp, 74.551270Hz=0A= (II) Silicon Motion(0): Not using default mode "832x624" (hsync out of = range)=0A= (II) Silicon Motion(0): Not using default mode "416x312" (bad mode = clock/interlace/doublescan)=0A= (II) Silicon Motion(0): Mode: 1400x1050 8-bpp, 59.975616Hz=0A= (II) Silicon Motion(0): Not using default mode "1400x1050" (hsync out of = range)=0A= (II) Silicon Motion(0): Not using default mode "700x525" (bad mode = clock/interlace/doublescan)=0A= (II) Silicon Motion(0): Not using default mode "1400x1050" (bad mode = clock/interlace/doublescan)=0A= (II) Silicon Motion(0): Not using default mode "700x525" (bad mode = clock/interlace/doublescan)=0A= (II) Silicon Motion(0): Mode: 1600x1024 8-bpp, 59.998093Hz=0A= (II) Silicon Motion(0): Not using default mode "1600x1024" (hsync out of = range)=0A= (II) Silicon Motion(0): Not using default mode "800x512" (bad mode = clock/interlace/doublescan)=0A= (II) Silicon Motion(0): Mode: 640x480 8-bpp, 85.008308Hz=0A= (II) Silicon Motion(0): Mode: 800x600 8-bpp, 75.000000Hz=0A= (II) Silicon Motion(0): Mode: 1024x768 8-bpp, 60.003841Hz=0A= (II) Silicon Motion(0): Not using mode "1280x1024" (no mode of this name)=0A= (--) Silicon Motion(0): Virtual size is 1024x768 (pitch 1024)=0A= (**) Silicon Motion(0): Default mode "640x480": 36.0 MHz (scaled from = 0.0 MHz), 43.3 kHz, 85.0 Hz=0A= (II) Silicon Motion(0): Modeline "640x480" 36.00 640 696 752 832 480 = 481 484 509 -hsync -vsync=0A= (**) Silicon Motion(0): Default mode "800x600": 49.5 MHz (scaled from = 0.0 MHz), 46.9 kHz, 75.0 Hz=0A= (II) Silicon Motion(0): Modeline "800x600" 49.50 800 816 896 1056 = 600 601 604 625 +hsync +vsync=0A= (**) Silicon Motion(0): Default mode "1024x768": 65.0 MHz (scaled from = 0.0 MHz), 48.4 kHz, 60.0 Hz=0A= (II) Silicon Motion(0): Modeline "1024x768" 65.00 1024 1048 1184 1344 = 768 771 777 806 -hsync -vsync=0A= (--) Silicon Motion(0): Display dimensions: (320, 240) mm=0A= (--) Silicon Motion(0): DPI set to (81, 81)=0A= (II) Loading sub module "fb"=0A= (II) LoadModule: "fb"=0A= (II) Loading /usr/X11R6/lib/modules/libfb.a=0A= (II) Module fb: vendor=3D"The XFree86 Project"=0A= compiled for 4.2.0, module version =3D 1.0.0=0A= ABI class: XFree86 ANSI C Emulation, version 0.1=0A= (II) Loading sub module "xaa"=0A= (II) LoadModule: "xaa"=0A= (II) Loading /usr/X11R6/lib/modules/libxaa.a=0A= (II) Module xaa: vendor=3D"The XFree86 Project"=0A= compiled for 4.2.0, module version =3D 1.0.0=0A= ABI class: XFree86 Video Driver, version 0.5=0A= (II) Loading sub module "ramdac"=0A= (II) LoadModule: "ramdac"=0A= (II) Loading /usr/X11R6/lib/modules/libramdac.a=0A= (II) Module ramdac: vendor=3D"The XFree86 Project"=0A= compiled for 4.2.0, module version =3D 0.1.0=0A= ABI class: XFree86 Video Driver, version 0.5=0A= (II) do I need RAC? No, I don't.=0A= (II) resource ranges after preInit:=0A= [0] 0 0xc0000000 - 0xc0ffffff (0x1000000) MX[B]=0A= [1] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)=0A= [2] -1 0x00100000 - 0x1fffffff (0x1ff00000) MX[B]E(B)=0A= [3] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]=0A= [4] -1 0x000c0000 - 0x000effff (0x30000) MX[B]=0A= [5] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]=0A= [6] -1 0x60080000 - 0x60080000 (0x1) MX[B]=0A= [7] -1 0x600c0000 - 0x600c0000 (0x1) MX[B]=0A= [8] -1 0x24000000 - 0x240000ff (0x100) MX[B]=0A= [9] -1 0x20000000 - 0x23ffffff (0x4000000) MX[B]=0A= [10] -1 0xc0000000 - 0xc0ffffff (0x1000000) MX[B](B)=0A= [11] 0 0x000a0000 - 0x000affff (0x10000) MS[B]=0A= [12] 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]=0A= [13] 0 0x000b8000 - 0x000bffff (0x8000) MS[B]=0A= [14] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]=0A= [15] -1 0x00000000 - 0x000000ff (0x100) IX[B]=0A= [16] -1 0x00000200 - 0x00000200 (0x1) IX[B]=0A= [17] -1 0x00003200 - 0x000032ff (0x100) IX[B]=0A= [18] -1 0x00003100 - 0x00003107 (0x8) IX[B]=0A= [19] -1 0x00003000 - 0x000030ff (0x100) IX[B]=0A= [20] -1 0x00001200 - 0x0000121f (0x20) IX[B]=0A= [21] -1 0x00001100 - 0x0000110f (0x10) IX[B]=0A= [22] 0 0x000003b0 - 0x000003bb (0xc) IS[B]=0A= [23] 0 0x000003c0 - 0x000003df (0x20) IS[B]=0A= (II) Silicon Motion(0): Splitting WC range: base: 0xc0000000, size: = 0x680000=0A= (II) Silicon Motion(0): Splitting WC range: base: 0xc0400000, size: = 0x280000=0A= (=3D=3D) Silicon Motion(0): Write-combining range (0xc0600000,0x80000)=0A= (=3D=3D) Silicon Motion(0): Write-combining range (0xc0400000,0x280000)=0A= (=3D=3D) Silicon Motion(0): Write-combining range (0xc0000000,0x680000)=0A= (II) Silicon Motion(0): Cursor Offset: 0067FC00 Reserved: 0067F800=0A= (II) Silicon Motion(0): OFF Panel Size =3D 1024x768=0A= (II) Loading sub module "int10"=0A= (II) LoadModule: "int10"=0A= (II) Reloading /usr/X11R6/lib/modules/linux/libint10.a=0A= (II) Silicon Motion(0): initializing int10=0A= (II) Silicon Motion(0): Primary V_BIOS segment is: 0xc000=0A= (II) Silicon Motion(0): VESA BIOS detected=0A= (II) Silicon Motion(0): VESA VBE Version 2.0=0A= (II) Silicon Motion(0): VESA VBE Total Mem: 6656 kB=0A= (II) Silicon Motion(0): VESA VBE OEM: Silicon Motion SM820 VGA BIOS=0A= (II) Silicon Motion(0): VESA VBE OEM Software Rev: 2.0=0A= (II) Silicon Motion(0): VESA VBE OEM Vendor: SM820=0A= (II) Silicon Motion(0): VESA VBE OEM Product: SM820=0A= (II) Silicon Motion(0): VESA VBE OEM Product Rev: =0A= (II) Silicon Motion(0): Current mode 0x55.=0A= (II) Silicon Motion(0): Setting mode 0x50=0A= (II) Silicon Motion(0): FrameBuffer Box: 0,0 - 1024,6654=0A= (II) Silicon Motion(0): Using XFree86 Acceleration Architecture (XAA)=0A= Screen to screen bit blits=0A= Solid filled rectangles=0A= 8x8 mono pattern filled rectangles=0A= 8x8 color pattern filled rectangles=0A= CPU to Screen color expansion=0A= Solid Horizontal and Vertical Lines=0A= Offscreen Pixmaps=0A= Setting up tile and stipple cache:=0A= 32 128x128 slots=0A= 26 256x256 slots=0A= 14 512x512 slots=0A= 32 8x8 color pattern slots=0A= (II) Silicon Motion(0): I2C device "I2C bus:SAA 7111A" registered.=0A= (II) Silicon Motion(0): I2C device "I2C bus:SAA 7111A" removed.=0A= (II) Setting vga for screen 0.=0A= (II) Initializing built-in extension MIT-SHM=0A= (II) Initializing built-in extension XInputExtension=0A= (II) Initializing built-in extension XTEST=0A= (II) Initializing built-in extension XKEYBOARD=0A= (II) Initializing built-in extension LBX=0A= (II) Initializing built-in extension XC-APPGROUP=0A= (II) Initializing built-in extension SECURITY=0A= (II) Initializing built-in extension XINERAMA=0A= (II) Initializing built-in extension RENDER=0A= (**) Option "Protocol" "Microsoft"=0A= (**) Mouse1: Protocol: "Microsoft"=0A= (**) Option "CorePointer"=0A= (**) Mouse1: Core Pointer=0A= (**) Option "Device" "/dev/mouse"=0A= (**) Option "Emulate3Buttons"=0A= (**) Mouse1: Emulate3Buttons, Emulate3Timeout: 50=0A= (=3D=3D) Mouse1: Buttons: 3=0A= (**) Option "BaudRate" "1200"=0A= (**) Mouse1: BaudRate: 1200=0A= (II) Keyboard "Keyboard1" handled by legacy driver=0A= (II) XINPUT: Adding extended input device "Mouse1" (type: MOUSE)=0A= (II) Silicon Motion(0): Setting mode 0x55=0A= (II) Silicon Motion(0): I2C bus "I2C bus" removed.=0A= ------=_NextPart_000_0005_01C204E0.9ADF3520 Content-Type: application/octet-stream; name="XF86Config" Content-Transfer-Encoding: quoted-printable Content-Disposition: attachment; filename="XF86Config" # File generated by xf86config.=0A= =0A= #=0A= # Copyright (c) 1999 by The XFree86 Project, Inc.=0A= #=0A= # Permission is hereby granted, free of charge, to any person obtaining a=0A= # copy of this software and associated documentation files (the = "Software"),=0A= # to deal in the Software without restriction, including without = limitation=0A= # the rights to use, copy, modify, merge, publish, distribute, = sublicense,=0A= # and/or sell copies of the Software, and to permit persons to whom the=0A= # Software is furnished to do so, subject to the following conditions:=0A= # =0A= # The above copyright notice and this permission notice shall be = included in=0A= # all copies or substantial portions of the Software.=0A= # =0A= # THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, = EXPRESS OR=0A= # IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF = MERCHANTABILITY,=0A= # FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT = SHALL=0A= # THE XFREE86 PROJECT BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER = LIABILITY,=0A= # WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT = OF=0A= # OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE=0A= # SOFTWARE.=0A= # =0A= # Except as contained in this notice, the name of the XFree86 Project = shall=0A= # not be used in advertising or otherwise to promote the sale, use or = other=0A= # dealings in this Software without prior written authorization from the=0A= # XFree86 Project.=0A= #=0A= =0A= # **********************************************************************=0A= # Refer to the XF86Config(4/5) man page for details about the format of =0A= # this file.=0A= # **********************************************************************=0A= =0A= # **********************************************************************=0A= # Module section -- this section is used to specify=0A= # which dynamically loadable modules to load.=0A= # **********************************************************************=0A= #=0A= Section "Module"=0A= =0A= # This loads the DBE extension module.=0A= =0A= Load "dbe" # Double buffer extension=0A= =0A= # This loads the miscellaneous extensions module, and disables=0A= # initialisation of the XFree86-DGA extension within that module.=0A= SubSection "extmod"=0A= Option "omit xfree86-dga" # don't initialise the DGA extension=0A= EndSubSection=0A= =0A= # This loads the Type1 and FreeType font modules=0A= Load "type1"=0A= Load "freetype"=0A= =0A= # This loads the GLX module=0A= # Load "glx"=0A= =0A= EndSection=0A= =0A= # **********************************************************************=0A= # Files section. This allows default font and rgb paths to be set=0A= # **********************************************************************=0A= =0A= Section "Files"=0A= =0A= # The location of the RGB database. Note, this is the name of the=0A= # file minus the extension (like ".txt" or ".db"). There is normally=0A= # no need to change the default.=0A= =0A= RgbPath "/usr/X11R6/lib/X11/rgb"=0A= =0A= # Multiple FontPath entries are allowed (which are concatenated = together),=0A= # as well as specifying multiple comma-separated entries in one FontPath=0A= # command (or a combination of both methods)=0A= # =0A= # If you don't have a floating point coprocessor and emacs, Mosaic or = other=0A= # programs take long to start up, try moving the Type1 and Speedo = directory=0A= # to the end of this list (or comment them out).=0A= # =0A= =0A= FontPath "/usr/X11R6/lib/X11/fonts/local/"=0A= FontPath "/usr/X11R6/lib/X11/fonts/misc/"=0A= FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"=0A= FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"=0A= FontPath "/usr/X11R6/lib/X11/fonts/Type1/"=0A= FontPath "/usr/X11R6/lib/X11/fonts/Speedo/"=0A= FontPath "/usr/X11R6/lib/X11/fonts/75dpi/"=0A= FontPath "/usr/X11R6/lib/X11/fonts/100dpi/"=0A= =0A= # The module search path. The default path is shown here.=0A= =0A= # ModulePath "/usr/X11R6/lib/modules"=0A= =0A= EndSection=0A= =0A= # **********************************************************************=0A= # Server flags section.=0A= # **********************************************************************=0A= =0A= Section "ServerFlags"=0A= =0A= # Uncomment this to cause a core dump at the spot where a signal is =0A= # received. This may leave the console in an unusable state, but may=0A= # provide a better stack trace in the core dump to aid in debugging=0A= =0A= # Option "NoTrapSignals"=0A= =0A= # Uncomment this to disable the <Crtl><Alt><BS> server abort sequence=0A= # This allows clients to receive this key event.=0A= =0A= # Option "DontZap"=0A= =0A= # Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching=0A= # sequences. This allows clients to receive these key events.=0A= =0A= # Option "Dont Zoom"=0A= =0A= # Uncomment this to disable tuning with the xvidtune client. With=0A= # it the client can still run and fetch card and monitor attributes,=0A= # but it will not be allowed to change them. If it tries it will=0A= # receive a protocol error.=0A= =0A= # Option "DisableVidModeExtension"=0A= =0A= # Uncomment this to enable the use of a non-local xvidtune client. =0A= =0A= # Option "AllowNonLocalXvidtune"=0A= =0A= # Uncomment this to disable dynamically modifying the input device=0A= # (mouse and keyboard) settings. =0A= =0A= # Option "DisableModInDev"=0A= =0A= # Uncomment this to enable the use of a non-local client to=0A= # change the keyboard or mouse settings (currently only xset).=0A= =0A= # Option "AllowNonLocalModInDev"=0A= =0A= EndSection=0A= =0A= # **********************************************************************=0A= # Input devices=0A= # **********************************************************************=0A= =0A= # **********************************************************************=0A= # Core keyboard's InputDevice section=0A= # **********************************************************************=0A= =0A= Section "InputDevice"=0A= =0A= Identifier "Keyboard1"=0A= Driver "Keyboard"=0A= # For most OSs the protocol can be omitted (it defaults to "Standard").=0A= # When using XQUEUE (only for SVR3 and SVR4, but not Solaris),=0A= # uncomment the following line.=0A= =0A= # Option "Protocol" "Xqueue"=0A= =0A= Option "AutoRepeat" "500 30"=0A= =0A= # Specify which keyboard LEDs can be user-controlled (eg, with xset(1))=0A= # Option "Xleds" "1 2 3"=0A= =0A= # Option "LeftAlt" "Meta"=0A= # Option "RightAlt" "ModeShift"=0A= =0A= # To customise the XKB settings to suit your keyboard, modify the=0A= # lines below (which are the defaults). For example, for a non-U.S.=0A= # keyboard, you will probably want to use:=0A= # Option "XkbModel" "pc102"=0A= # If you have a US Microsoft Natural keyboard, you can use:=0A= # Option "XkbModel" "microsoft"=0A= #=0A= # Then to change the language, change the Layout setting.=0A= # For example, a german layout can be obtained with:=0A= # Option "XkbLayout" "de"=0A= # or:=0A= # Option "XkbLayout" "de"=0A= # Option "XkbVariant" "nodeadkeys"=0A= #=0A= # If you'd like to switch the positions of your capslock and=0A= # control keys, use:=0A= # Option "XkbOptions" "ctrl:swapcaps"=0A= =0A= # These are the default XKB settings for XFree86=0A= # Option "XkbRules" "xfree86"=0A= # Option "XkbModel" "pc101"=0A= # Option "XkbLayout" "us"=0A= # Option "XkbVariant" ""=0A= # Option "XkbOptions" ""=0A= =0A= # Option "XkbDisable"=0A= =0A= Option "XkbRules" "xfree86"=0A= Option "XkbModel" "pc101"=0A= Option "XkbLayout" "de"=0A= =0A= EndSection=0A= =0A= =0A= # **********************************************************************=0A= # Core Pointer's InputDevice section=0A= # **********************************************************************=0A= =0A= Section "InputDevice"=0A= =0A= # Identifier and driver=0A= =0A= Identifier "Mouse1"=0A= Driver "mouse"=0A= Option "Protocol" "Microsoft"=0A= Option "Device" "/dev/mouse"=0A= =0A= # When using XQUEUE, comment out the above two lines, and uncomment=0A= # the following line.=0A= =0A= # Option "Protocol" "Xqueue"=0A= =0A= # Baudrate and SampleRate are only for some Logitech mice. In=0A= # almost every case these lines should be omitted.=0A= =0A= # Option "BaudRate" "9600"=0A= # Option "SampleRate" "150"=0A= =0A= # Emulate3Buttons is an option for 2-button Microsoft mice=0A= # Emulate3Timeout is the timeout in milliseconds (default is 50ms)=0A= =0A= Option "Emulate3Buttons"=0A= # Option "Emulate3Timeout" "50"=0A= =0A= # ChordMiddle is an option for some 3-button Logitech mice=0A= =0A= # Option "ChordMiddle"=0A= =0A= EndSection=0A= =0A= =0A= # **********************************************************************=0A= # Other input device sections =0A= # this is optional and is required only if you=0A= # are using extended input devices. This is for example only. Refer=0A= # to the XF86Config man page for a description of the options.=0A= # **********************************************************************=0A= #=0A= # Section "InputDevice" =0A= # Identifier "Mouse2"=0A= # Driver "mouse"=0A= # Option "Protocol" "MouseMan"=0A= # Option "Device" "/dev/mouse2"=0A= # EndSection=0A= #=0A= # Section "InputDevice"=0A= # Identifier "spaceball"=0A= # Driver "magellan"=0A= # Option "Device" "/dev/cua0"=0A= # EndSection=0A= #=0A= # Section "InputDevice"=0A= # Identifier "spaceball2"=0A= # Driver "spaceorb"=0A= # Option "Device" "/dev/cua0"=0A= # EndSection=0A= #=0A= # Section "InputDevice"=0A= # Identifier "touchscreen0"=0A= # Driver "microtouch"=0A= # Option "Device" "/dev/ttyS0"=0A= # Option "MinX" "1412"=0A= # Option "MaxX" "15184"=0A= # Option "MinY" "15372"=0A= # Option "MaxY" "1230"=0A= # Option "ScreenNumber" "0"=0A= # Option "ReportingMode" "Scaled"=0A= # Option "ButtonNumber" "1"=0A= # Option "SendCoreEvents"=0A= # EndSection=0A= #=0A= # Section "InputDevice"=0A= # Identifier "touchscreen1"=0A= # Driver "elo2300"=0A= # Option "Device" "/dev/ttyS0"=0A= # Option "MinX" "231"=0A= # Option "MaxX" "3868"=0A= # Option "MinY" "3858"=0A= # Option "MaxY" "272"=0A= # Option "ScreenNumber" "0"=0A= # Option "ReportingMode" "Scaled"=0A= # Option "ButtonThreshold" "17"=0A= # Option "ButtonNumber" "1"=0A= # Option "SendCoreEvents"=0A= # EndSection=0A= =0A= # **********************************************************************=0A= # Monitor section=0A= # **********************************************************************=0A= =0A= # Any number of monitor sections may be present=0A= =0A= Section "Monitor"=0A= =0A= Identifier "TFT"=0A= =0A= # HorizSync is in kHz unless units are specified.=0A= # HorizSync may be a comma separated list of discrete values, or a=0A= # comma separated list of ranges of values.=0A= # NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S=0A= # USER MANUAL FOR THE CORRECT NUMBERS.=0A= =0A= HorizSync 31.5 - 48.5=0A= =0A= # HorizSync 30-64 # multisync=0A= # HorizSync 31.5, 35.2 # multiple fixed sync frequencies=0A= # HorizSync 15-25, 30-50 # multiple ranges of sync frequencies=0A= =0A= # VertRefresh is in Hz unless units are specified.=0A= # VertRefresh may be a comma separated list of discrete values, or a=0A= # comma separated list of ranges of values.=0A= # NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S=0A= # USER MANUAL FOR THE CORRECT NUMBERS.=0A= =0A= VertRefresh 50-90=0A= =0A= EndSection=0A= =0A= =0A= # **********************************************************************=0A= # Graphics device section=0A= # **********************************************************************=0A= =0A= # Any number of graphics device sections may be present=0A= =0A= # Standard VGA Device:=0A= =0A= Section "Device"=0A= Identifier "Standard VGA"=0A= VendorName "Unknown"=0A= BoardName "Unknown"=0A= =0A= # The chipset line is optional in most cases. It can be used to override=0A= # the driver's chipset detection, and should not normally be specified.=0A= =0A= # Chipset "generic"=0A= =0A= # The Driver line must be present. When using run-time loadable driver=0A= # modules, this line instructs the server to load the specified driver=0A= # module. Even when not using loadable driver modules, this line=0A= # indicates which driver should interpret the information in this = section.=0A= =0A= Driver "vga"=0A= # The BusID line is used to specify which of possibly multiple devices=0A= # this section is intended for. When this line isn't present, a device=0A= # section can only match up with the primary video device. For PCI=0A= # devices a line like the following could be used. This line should not=0A= # normally be included unless there is more than one video device=0A= # intalled.=0A= =0A= # BusID "PCI:0:10:0"=0A= =0A= # VideoRam 256=0A= =0A= # Clocks 25.2 28.3=0A= =0A= EndSection=0A= =0A= # Device configured by xf86config:=0A= =0A= Section "Device"=0A= Identifier "Laptop_SMI"=0A= Driver "siliconmotion"=0A= #VideoRam 6656=0A= # Insert Clocks lines here if appropriate=0A= EndSection=0A= =0A= =0A= # **********************************************************************=0A= # Screen sections=0A= # **********************************************************************=0A= =0A= # Any number of screen sections may be present. Each describes=0A= # the configuration of a single screen. A single specific screen section=0A= # may be specified from the X server command line with the "-screen"=0A= # option.=0A= Section "Screen"=0A= Identifier "Screen 1"=0A= Device "Laptop_SMI"=0A= Monitor "TFT"=0A= DefaultDepth 8=0A= =0A= Subsection "Display"=0A= Depth 8=0A= Modes "640x480" "800x600" "1024x768" "1280x1024"=0A= ViewPort 0 0=0A= EndSubsection=0A= Subsection "Display"=0A= Depth 16=0A= Modes "640x480" "800x600" "1024x768" "1280x1024"=0A= ViewPort 0 0=0A= EndSubsection=0A= Subsection "Display"=0A= Depth 24=0A= Modes "640x480" "800x600" "1024x768" "1280x1024"=0A= ViewPort 0 0=0A= EndSubsection=0A= EndSection=0A= =0A= # **********************************************************************=0A= # ServerLayout sections.=0A= # **********************************************************************=0A= =0A= # Any number of ServerLayout sections may be present. Each describes=0A= # the way multiple screens are organised. A specific ServerLayout=0A= # section may be specified from the X server command line with the=0A= # "-layout" option. In the absence of this, the first section is used.=0A= # When now ServerLayout section is present, the first Screen section=0A= # is used alone.=0A= =0A= Section "ServerLayout"=0A= =0A= # The Identifier line must be present=0A= Identifier "Simple Layout"=0A= =0A= # Each Screen line specifies a Screen section name, and optionally=0A= # the relative position of other screens. The four names after=0A= # primary screen name are the screens to the top, bottom, left and right=0A= # of the primary screen. In this example, screen 2 is located to the=0A= # right of screen 1.=0A= =0A= Screen "Screen 1"=0A= =0A= # Each InputDevice line specifies an InputDevice section name and=0A= # optionally some options to specify the way the device is to be=0A= # used. Those options include "CorePointer", "CoreKeyboard" and=0A= # "SendCoreEvents".=0A= =0A= InputDevice "Mouse1" "CorePointer"=0A= InputDevice "Keyboard1" "CoreKeyboard"=0A= =0A= EndSection=0A= =0A= ------=_NextPart_000_0005_01C204E0.9ADF3520--
