This is a multi-part message in MIME format. ------=_NextPart_000_0019_01C1F5B2.C9170F40 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit PII 350 192 RAM RH 7.2 enigma KDE 2.2 Senario: wanted into install kfontinstall stand alone version RPM. Dependency check indicated T1lib, mnglib and Qt2 needed. Downloaded the rpms. installed them? The kfontinstall hung. tried logging out and x began respawning over and over. ctrl+all+del and x respawned over and over. went linux single. did start x got: fatal server error could not open default font 'fixed' XIO fatal IO error 104 (connection reset by peer) on xserver ":0.0" after 0 requests (o known precessed) with 0 events remaining. attached is the XFree86.0.log from /var Any help would be greatly appreciated. Stanley ------=_NextPart_000_0019_01C1F5B2.C9170F40 Content-Type: application/octet-stream; name="XFree86.0.log" Content-Transfer-Encoding: quoted-printable Content-Disposition: attachment; filename="XFree86.0.log" =0A= XFree86 Version 4.1.0 (Red Hat Linux release: 4.1.0-3) / X Window System=0A= (protocol Version 11, revision 0, vendor release 6510)=0A= Release Date: 2 June 2001=0A= If the server is older than 6-12 months, or if your card is=0A= newer than the above date, look for a newer version before=0A= reporting problems. (See http://www.XFree86.Org/FAQ)=0A= Build Operating System: Linux 2.4.7-0.13.1smp i686 [ELF] =0A= Build Host: stripples.devel.redhat.com=0A= =0A= Module Loader present=0A= (=3D=3D) Log file: "/var/log/XFree86.0.log", Time: Tue May 7 08:35:32 = 2002=0A= (=3D=3D) Using config file: "/etc/X11/XF86Config-4"=0A= Markers: (--) probed, (**) from config file, (=3D=3D) default setting,=0A= (++) from command line, (!!) notice, (II) informational,=0A= (WW) warning, (EE) error, (NI) not implemented, (??) unknown.=0A= (=3D=3D) ServerLayout "Anaconda Configured"=0A= (**) |-->Screen "Screen0" (0)=0A= (**) | |-->Monitor "Monitor0"=0A= (**) | |-->Device "S3 Savage4"=0A= (**) |-->Input Device "Mouse0"=0A= (**) |-->Input Device "Keyboard0"=0A= (**) Option "XkbRules" "xfree86"=0A= (**) XKB: rules: "xfree86"=0A= (**) Option "XkbModel" "pc105"=0A= (**) XKB: model: "pc105"=0A= (**) Option "XkbLayout" "us"=0A= (**) XKB: layout: "us"=0A= (=3D=3D) Keyboard: CustomKeycode disabled=0A= (**) FontPath set to "unix/:7100"=0A= (**) RgbPath set to "/usr/X11R6/lib/X11/rgb"=0A= (=3D=3D) ModulePath set to "/usr/X11R6/lib/modules"=0A= (--) using VT number 2=0A= =0A= (WW) Cannot open APM=0A= (II) Module ABI versions:=0A= XFree86 ANSI C Emulation: 0.1=0A= XFree86 Video Driver: 0.4=0A= XFree86 XInput driver : 0.2=0A= XFree86 Server Extension : 0.1=0A= XFree86 Font Renderer : 0.2=0A= (II) Loader running on linux=0A= (II) LoadModule: "bitmap"=0A= (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a=0A= (II) Module bitmap: vendor=3D"The XFree86 Project"=0A= compiled for 4.1.0, module version =3D 1.0.0=0A= Module class: XFree86 Font Renderer=0A= ABI class: XFree86 Font Renderer, version 0.2=0A= (II) Loading font Bitmap=0A= (II) LoadModule: "pcidata"=0A= (II) Loading /usr/X11R6/lib/modules/libpcidata.a=0A= (II) Module pcidata: vendor=3D"The XFree86 Project"=0A= compiled for 4.1.0, module version =3D 0.1.0=0A= ABI class: XFree86 Video Driver, version 0.4=0A= (II) PCI: Probing config type using method 1=0A= (II) PCI: Config type is 1=0A= (II) PCI: stages =3D 0x03, oldVal1 =3D 0x80003940, mode1Res1 =3D = 0x80000000=0A= (II) PCI: PCI scan (all values are in hex)=0A= (II) PCI: 00:00:0: chip 8086,7190 card 0000,0000 rev 03 class 06,00,00 = hdr 00=0A= (II) PCI: 00:01:0: chip 8086,7191 card 0000,0000 rev 03 class 06,04,00 = hdr 01=0A= (II) PCI: 00:07:0: chip 8086,7110 card 0000,0000 rev 02 class 06,01,00 = hdr 80=0A= (II) PCI: 00:07:1: chip 8086,7111 card 0000,0000 rev 01 class 01,01,80 = hdr 00=0A= (II) PCI: 00:07:2: chip 8086,7112 card 0000,0000 rev 01 class 0c,03,00 = hdr 00=0A= (II) PCI: 00:07:3: chip 8086,7113 card 0000,0000 rev 02 class 06,80,00 = hdr 00=0A= (II) PCI: 01:00:0: chip 5333,8a22 card 1092,4905 rev 03 class 03,00,00 = hdr 00=0A= (II) PCI: End of PCI scan=0A= (II) LoadModule: "scanpci"=0A= (II) Loading /usr/X11R6/lib/modules/libscanpci.a=0A= (II) Module scanpci: vendor=3D"The XFree86 Project"=0A= compiled for 4.1.0, module version =3D 0.1.0=0A= ABI class: XFree86 Video Driver, version 0.4=0A= (II) UnloadModule: "scanpci"=0A= (II) Unloading /usr/X11R6/lib/modules/libscanpci.a=0A= (II) Host-to-PCI bridge:=0A= (II) PCI-to-ISA bridge:=0A= (II) PCI-to-PCI bridge:=0A= (II) Bus 0: bridge is at (0:0:0), (-1,0,0), BCTRL: 0x08 (VGA_EN is set)=0A= (II) Bus 0 I/O range:=0A= [0] -1 0x00000000 - 0x0000ffff (0x10000) IX[B]=0A= (II) Bus 0 non-prefetchable memory range:=0A= [0] -1 0x00000000 - 0xffffffff (0x0) MX[B]=0A= (II) Bus 0 prefetchable memory range:=0A= [0] -1 0x00000000 - 0xffffffff (0x0) MX[B]=0A= (II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x8c (VGA_EN is set)=0A= (II) Bus 1 I/O range:=0A= (II) Bus 1 non-prefetchable memory range:=0A= [0] -1 0xe8000000 - 0xe80fffff (0x100000) MX[B]=0A= (II) Bus 1 prefetchable memory range:=0A= [0] -1 0xf0000000 - 0xf7ffffff (0x8000000) MX[B]=0A= (II) Bus -1: bridge is at (0:7:0), (0,-1,0), BCTRL: 0x08 (VGA_EN is set)=0A= (II) Bus -1 I/O range:=0A= (II) Bus -1 non-prefetchable memory range:=0A= (II) Bus -1 prefetchable memory range:=0A= (--) PCI:*(1:0:0) S3 Savage4 rev 3, Mem @ 0xe8000000/19, 0xf0000000/27=0A= (II) Addressable bus resource ranges are=0A= [0] -1 0x00000000 - 0xffffffff (0x0) MX[B]=0A= [1] -1 0x00000000 - 0x0000ffff (0x10000) IX[B]=0A= (II) OS-reported resource ranges:=0A= [0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)=0A= [1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)=0A= [2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]=0A= [3] -1 0x000c0000 - 0x000effff (0x30000) MX[B]=0A= [4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]=0A= [5] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]=0A= [6] -1 0x00000000 - 0x000000ff (0x100) IX[B]=0A= (II) Active PCI resource ranges:=0A= [0] -1 0xec000000 - 0xefffffff (0x4000000) MX[B]=0A= [1] -1 0xf0000000 - 0xf7ffffff (0x8000000) MX[B](B)=0A= [2] -1 0xe8000000 - 0xe807ffff (0x80000) MX[B](B)=0A= [3] -1 0x00001000 - 0x0000101f (0x20) IX[B]=0A= [4] -1 0x00001020 - 0x0000102f (0x10) IX[B]=0A= (II) Active PCI resource ranges after removing overlaps:=0A= [0] -1 0xec000000 - 0xefffffff (0x4000000) MX[B]=0A= [1] -1 0xf0000000 - 0xf7ffffff (0x8000000) MX[B](B)=0A= [2] -1 0xe8000000 - 0xe807ffff (0x80000) MX[B](B)=0A= [3] -1 0x00001000 - 0x0000101f (0x20) IX[B]=0A= [4] -1 0x00001020 - 0x0000102f (0x10) IX[B]=0A= (II) OS-reported resource ranges after removing overlaps with PCI:=0A= [0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)=0A= [1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)=0A= [2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]=0A= [3] -1 0x000c0000 - 0x000effff (0x30000) MX[B]=0A= [4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]=0A= [5] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]=0A= [6] -1 0x00000000 - 0x000000ff (0x100) IX[B]=0A= (II) All system resource ranges:=0A= [0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)=0A= [1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)=0A= [2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]=0A= [3] -1 0x000c0000 - 0x000effff (0x30000) MX[B]=0A= [4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]=0A= [5] -1 0xec000000 - 0xefffffff (0x4000000) MX[B]=0A= [6] -1 0xf0000000 - 0xf7ffffff (0x8000000) MX[B](B)=0A= [7] -1 0xe8000000 - 0xe807ffff (0x80000) MX[B](B)=0A= [8] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]=0A= [9] -1 0x00000000 - 0x000000ff (0x100) IX[B]=0A= [10] -1 0x00001000 - 0x0000101f (0x20) IX[B]=0A= [11] -1 0x00001020 - 0x0000102f (0x10) IX[B]=0A= (II) LoadModule: "GLcore"=0A= (II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a=0A= (II) Module GLcore: vendor=3D"The XFree86 Project"=0A= compiled for 4.1.0, module version =3D 1.0.0=0A= ABI class: XFree86 Server Extension, version 0.1=0A= (II) LoadModule: "dbe"=0A= (II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a=0A= (II) Module dbe: vendor=3D"The XFree86 Project"=0A= compiled for 4.1.0, module version =3D 1.0.0=0A= Module class: XFree86 Server Extension=0A= ABI class: XFree86 Server Extension, version 0.1=0A= (II) Loading extension DOUBLE-BUFFER=0A= (II) LoadModule: "extmod"=0A= (II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a=0A= (II) Module extmod: vendor=3D"The XFree86 Project"=0A= compiled for 4.1.0, module version =3D 1.0.0=0A= Module class: XFree86 Server Extension=0A= ABI class: XFree86 Server Extension, version 0.1=0A= (II) Loading extension SHAPE=0A= (II) Loading extension MIT-SUNDRY-NONSTANDARD=0A= (II) Loading extension BIG-REQUESTS=0A= (II) Loading extension SYNC=0A= (II) Loading extension MIT-SCREEN-SAVER=0A= (II) Loading extension XC-MISC=0A= (II) Loading extension XFree86-VidModeExtension=0A= (II) Loading extension XFree86-Misc=0A= (II) Loading extension XFree86-DGA=0A= (II) Loading extension DPMS=0A= (II) Loading extension FontCache=0A= (II) Loading extension TOG-CUP=0A= (II) Loading extension Extended-Visual-Information=0A= (II) Loading extension XVideo=0A= (II) Loading extension XVideo-MotionCompensation=0A= (II) LoadModule: "fbdevhw"=0A= (II) Loading /usr/X11R6/lib/modules/linux/libfbdevhw.a=0A= (II) Module fbdevhw: vendor=3D"The XFree86 Project"=0A= compiled for 4.1.0, module version =3D 0.0.2=0A= ABI class: XFree86 Video Driver, version 0.4=0A= (II) LoadModule: "pex5"=0A= (II) Loading /usr/X11R6/lib/modules/extensions/libpex5.a=0A= (II) Module pex5: vendor=3D"The XFree86 Project"=0A= compiled for 4.1.0, module version =3D 1.0.0=0A= Module class: XFree86 Server Extension=0A= ABI class: XFree86 Server Extension, version 0.1=0A= (II) Loading extension X3D-PEX=0A= (II) LoadModule: "dri"=0A= (II) Loading /usr/X11R6/lib/modules/extensions/libdri.a=0A= (II) Module dri: vendor=3D"The XFree86 Project"=0A= compiled for 4.1.0, module version =3D 1.0.0=0A= ABI class: XFree86 Server Extension, version 0.1=0A= (II) Loading sub module "drm"=0A= (II) LoadModule: "drm"=0A= (II) Loading /usr/X11R6/lib/modules/linux/libdrm.a=0A= (II) Module drm: vendor=3D"The XFree86 Project"=0A= compiled for 4.1.0, module version =3D 1.0.0=0A= ABI class: XFree86 Server Extension, version 0.1=0A= (II) Loading extension XFree86-DRI=0A= (II) LoadModule: "glx"=0A= (II) Loading /usr/X11R6/lib/modules/extensions/libglx.a=0A= (II) Module glx: vendor=3D"The XFree86 Project"=0A= compiled for 4.1.0, module version =3D 1.0.0=0A= ABI class: XFree86 Server Extension, version 0.1=0A= (II) Loading sub module "GLcore"=0A= (II) LoadModule: "GLcore"=0A= (II) Reloading /usr/X11R6/lib/modules/extensions/libGLcore.a=0A= (II) Loading extension GLX=0A= (II) LoadModule: "pex5"=0A= (II) Reloading /usr/X11R6/lib/modules/extensions/libpex5.a=0A= (II) Loading extension X3D-PEX=0A= (II) LoadModule: "record"=0A= (II) Loading /usr/X11R6/lib/modules/extensions/librecord.a=0A= (II) Module record: vendor=3D"The XFree86 Project"=0A= compiled for 4.1.0, module version =3D 1.13.0=0A= Module class: XFree86 Server Extension=0A= ABI class: XFree86 Server Extension, version 0.1=0A= (II) Loading extension RECORD=0A= (II) LoadModule: "xie"=0A= (II) Loading /usr/X11R6/lib/modules/extensions/libxie.a=0A= (II) Module xie: vendor=3D"The XFree86 Project"=0A= compiled for 4.1.0, module version =3D 1.0.0=0A= Module class: XFree86 Server Extension=0A= ABI class: XFree86 Server Extension, version 0.1=0A= (II) Loading extension XIE=0A= (II) LoadModule: "savage"=0A= (II) Loading /usr/X11R6/lib/modules/drivers/savage_drv.o=0A= (II) Module savage: vendor=3D"The XFree86 Project"=0A= compiled for 4.1.0, module version =3D 1.1.19=0A= Module class: XFree86 Video Driver=0A= ABI class: XFree86 Video Driver, version 0.4=0A= (II) LoadModule: "mouse"=0A= (II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o=0A= (II) Module mouse: vendor=3D"The XFree86 Project"=0A= compiled for 4.1.0, module version =3D 1.0.0=0A= Module class: XFree86 XInput Driver=0A= ABI class: XFree86 XInput driver, version 0.2=0A= (II) SAVAGE: driver (version 1.1.19) for S3 Savage chipsets: Savage4,=0A= Savage3D, Savage3D-MV, Savage2000, Savage/MX-MV, Savage/MX,=0A= Savage/IX-MV, Savage/IX, ProSavage PM133, ProSavage KM133, Twister,=0A= TwisterK=0A= (II) Primary Device is: PCI 01:00:0=0A= (--) Assigning device section with no busID to primary device=0A= (--) Chipset Savage4 found=0A= (II) resource ranges after xf86ClaimFixedResources() call:=0A= [0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)=0A= [1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)=0A= [2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]=0A= [3] -1 0x000c0000 - 0x000effff (0x30000) MX[B]=0A= [4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]=0A= [5] -1 0xec000000 - 0xefffffff (0x4000000) MX[B]=0A= [6] -1 0xf0000000 - 0xf7ffffff (0x8000000) MX[B](B)=0A= [7] -1 0xe8000000 - 0xe807ffff (0x80000) MX[B](B)=0A= [8] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]=0A= [9] -1 0x00000000 - 0x000000ff (0x100) IX[B]=0A= [10] -1 0x00001000 - 0x0000101f (0x20) IX[B]=0A= [11] -1 0x00001020 - 0x0000102f (0x10) IX[B]=0A= (II) resource ranges after probing:=0A= [0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)=0A= [1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)=0A= [2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]=0A= [3] -1 0x000c0000 - 0x000effff (0x30000) MX[B]=0A= [4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]=0A= [5] -1 0xec000000 - 0xefffffff (0x4000000) MX[B]=0A= [6] -1 0xf0000000 - 0xf7ffffff (0x8000000) MX[B](B)=0A= [7] -1 0xe8000000 - 0xe807ffff (0x80000) MX[B](B)=0A= [8] 0 0x000a0000 - 0x000affff (0x10000) MS[B]=0A= [9] 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]=0A= [10] 0 0x000b8000 - 0x000bffff (0x8000) MS[B]=0A= [11] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]=0A= [12] -1 0x00000000 - 0x000000ff (0x100) IX[B]=0A= [13] -1 0x00001000 - 0x0000101f (0x20) IX[B]=0A= [14] -1 0x00001020 - 0x0000102f (0x10) IX[B]=0A= [15] 0 0x000003b0 - 0x000003bb (0xc) IS[B]=0A= [16] 0 0x000003c0 - 0x000003df (0x20) IS[B]=0A= (II) Setting vga for screen 0.=0A= (II) Loading sub module "vgahw"=0A= (II) LoadModule: "vgahw"=0A= (II) Loading /usr/X11R6/lib/modules/libvgahw.a=0A= (II) Module vgahw: vendor=3D"The XFree86 Project"=0A= compiled for 4.1.0, module version =3D 0.1.0=0A= ABI class: XFree86 Video Driver, version 0.4=0A= (**) SAVAGE(0): Depth 24, (--) framebuffer bpp 32=0A= (=3D=3D) SAVAGE(0): RGB weight 888=0A= (=3D=3D) SAVAGE(0): Default visual is TrueColor=0A= (=3D=3D) SAVAGE(0): Using HW cursor=0A= (=3D=3D) SAVAGE(0): Using video BIOS to set modes=0A= (II) Loading sub module "int10"=0A= (II) LoadModule: "int10"=0A= (II) Loading /usr/X11R6/lib/modules/linux/libint10.a=0A= (II) Module int10: vendor=3D"The XFree86 Project"=0A= compiled for 4.1.0, module version =3D 1.0.0=0A= ABI class: XFree86 Video Driver, version 0.4=0A= (II) SAVAGE(0): Primary V_BIOS segment is: 0xc000=0A= (II) Loading sub module "vbe"=0A= (II) LoadModule: "vbe"=0A= (II) Loading /usr/X11R6/lib/modules/libvbe.a=0A= (II) Module vbe: vendor=3D"The XFree86 Project"=0A= compiled for 4.1.0, module version =3D 1.0.0=0A= ABI class: XFree86 Video Driver, version 0.4=0A= (II) SAVAGE(0): VESA BIOS detected=0A= (II) SAVAGE(0): VESA VBE Version 2.0=0A= (II) SAVAGE(0): VESA VBE Total Mem: 8192 kB=0A= (II) SAVAGE(0): VESA VBE OEM: Diamond Mutlimedia. Savage4=0A= (II) SAVAGE(0): VESA VBE OEM Software Rev: 1.1=0A= (II) SAVAGE(0): VESA VBE OEM Vendor: Diamond Multimedia Inc.=0A= (II) SAVAGE(0): VESA VBE OEM Product: Savage4 Xtreme=0A= (II) SAVAGE(0): VESA VBE OEM Product Rev: Rev D=0A= (--) SAVAGE(0): Chip: id 8a22, "Savage4"=0A= (--) SAVAGE(0): Engine: "Savage4"=0A= (--) SAVAGE(0): mapping MMIO @ 0xe8000000 with size 0x80000=0A= (=3D=3D) SAVAGE(0): Using gamma correction (1.0, 1.0, 1.0)=0A= (--) SAVAGE(0): probed videoram: 8192k=0A= (II) Loading sub module "ddc"=0A= (II) LoadModule: "ddc"=0A= (II) Loading /usr/X11R6/lib/modules/libddc.a=0A= (II) Module ddc: vendor=3D"The XFree86 Project"=0A= compiled for 4.1.0, module version =3D 1.0.0=0A= ABI class: XFree86 Video Driver, version 0.4=0A= (--) SAVAGE(0): No DDC signal=0A= (II) Loading sub module "i2c"=0A= (II) LoadModule: "i2c"=0A= (II) Loading /usr/X11R6/lib/modules/libi2c.a=0A= (II) Module i2c: vendor=3D"The XFree86 Project"=0A= compiled for 4.1.0, module version =3D 1.2.0=0A= ABI class: XFree86 Video Driver, version 0.4=0A= (II) SAVAGE(0): I2C bus "I2C bus" initialized.=0A= (II) SAVAGE(0): I2C device "I2C bus:ddc2" registered.=0A= (II) SAVAGE(0): I2C device "I2C bus:ddc2" removed.=0A= (--) SAVAGE(0): Detected current MCLK value of 125.284 MHz=0A= (II) SAVAGE(0): Monitor0: Using hsync range of 30.00-72.00 kHz=0A= (II) SAVAGE(0): Monitor0: Using vrefresh range of 50.00-160.00 Hz=0A= (II) SAVAGE(0): Clock range: 10.00 to 220.00 MHz=0A= (II) SAVAGE(0): Not using mode "1400x1050" (hsync out of range)=0A= (II) SAVAGE(0): Not using mode "1400x1050" (hsync out of range)=0A= (II) SAVAGE(0): Not using mode "1400x1050" (hsync out of range)=0A= (II) SAVAGE(0): Not using default mode "1280x960" (hsync out of range)=0A= (II) SAVAGE(0): Not using default mode "1280x1024" (hsync out of range)=0A= (II) SAVAGE(0): Not using default mode "1280x1024" (hsync out of range)=0A= (II) SAVAGE(0): Not using default mode "1600x1200" (hsync out of range)=0A= (II) SAVAGE(0): Not using default mode "1600x1200" (hsync out of range)=0A= (II) SAVAGE(0): Not using default mode "1600x1200" (hsync out of range)=0A= (II) SAVAGE(0): Not using default mode "1600x1200" (hsync out of range)=0A= (II) SAVAGE(0): Not using default mode "1600x1200" (bad mode = clock/interlace/doublescan)=0A= (II) SAVAGE(0): Not using default mode "1792x1344" (insufficient memory = for mode)=0A= (II) SAVAGE(0): Not using default mode "1792x1344" (insufficient memory = for mode)=0A= (II) SAVAGE(0): Not using default mode "1856x1392" (insufficient memory = for mode)=0A= (II) SAVAGE(0): Not using default mode "1856x1392" (insufficient memory = for mode)=0A= (II) SAVAGE(0): Not using default mode "1920x1440" (insufficient memory = for mode)=0A= (II) SAVAGE(0): Not using default mode "1920x1440" (insufficient memory = for mode)=0A= (--) SAVAGE(0): Found 16 modes at this depth:=0A= [10f] 320 x 200, 70Hz=0A= [134] 320 x 240, 72Hz=0A= [144] 400 x 300, 72Hz=0A= [154] 512 x 384, 70Hz=0A= [11e] 640 x 400, 70Hz=0A= [112] 640 x 480, 200Hz, 160Hz, 100Hz, 85Hz, 75Hz, 72Hz, 60Hz=0A= [174] 720 x 480, 75Hz=0A= [17f] 720 x 576, 75Hz=0A= [115] 800 x 600, 160Hz, 100Hz, 85Hz, 75Hz, 72Hz, 60Hz, 56Hz=0A= [118] 1024 x 768, 130Hz, 85Hz, 75Hz, 70Hz, 60Hz=0A= [164] 1152 x 864, 100Hz, 85Hz, 75Hz, 70Hz, 60Hz=0A= [11b] 1280 x 1024, 100Hz, 85Hz, 75Hz, 70Hz, 60Hz=0A= [124] 1600 x 1200, 70Hz, 60Hz=0A= [194] 1920 x 1080, 60Hz, 48Hz=0A= [1a4] 1920 x 1200, 0Hz=0A= [139] 1920 x 1440, 0Hz=0A= (--) SAVAGE(0): Virtual size is 1024x768 (pitch 1024)=0A= (**) SAVAGE(0): Default mode "1024x768": 94.5 MHz, 68.7 kHz, 85.0 Hz=0A= (II) SAVAGE(0): Modeline "1024x768" 94.50 1024 1072 1168 1376 768 = 769 772 808 +hsync +vsync=0A= (=3D=3D) SAVAGE(0): DPI set to (75, 75)=0A= (II) Loading sub module "fb"=0A= (II) LoadModule: "fb"=0A= (II) Loading /usr/X11R6/lib/modules/libfb.a=0A= (II) Module fb: vendor=3D"The XFree86 Project"=0A= compiled for 4.1.0, module version =3D 1.0.0=0A= ABI class: XFree86 ANSI C Emulation, version 0.1=0A= (II) Loading sub module "xaa"=0A= (II) LoadModule: "xaa"=0A= (II) Loading /usr/X11R6/lib/modules/libxaa.a=0A= (II) Module xaa: vendor=3D"The XFree86 Project"=0A= compiled for 4.1.0, module version =3D 1.0.0=0A= ABI class: XFree86 Video Driver, version 0.4=0A= (II) Loading sub module "ramdac"=0A= (II) LoadModule: "ramdac"=0A= (II) Loading /usr/X11R6/lib/modules/libramdac.a=0A= (II) Module ramdac: vendor=3D"The XFree86 Project"=0A= compiled for 4.1.0, module version =3D 0.1.0=0A= ABI class: XFree86 Video Driver, version 0.4=0A= (--) Depth 24 pixmap format is 32 bpp=0A= (II) do I need RAC? No, I don't.=0A= (II) resource ranges after preInit:=0A= [0] 0 0xf0000000 - 0xf7ffffff (0x8000000) MS[B]=0A= [1] 0 0xe8000000 - 0xe807ffff (0x80000) MS[B]=0A= [2] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)=0A= [3] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)=0A= [4] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]=0A= [5] -1 0x000c0000 - 0x000effff (0x30000) MX[B]=0A= [6] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]=0A= [7] -1 0xec000000 - 0xefffffff (0x4000000) MX[B]=0A= [8] -1 0xf0000000 - 0xf7ffffff (0x8000000) MX[B](B)=0A= [9] -1 0xe8000000 - 0xe807ffff (0x80000) MX[B](B)=0A= [10] 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprD)=0A= [11] 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD)=0A= [12] 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprD)=0A= [13] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]=0A= [14] -1 0x00000000 - 0x000000ff (0x100) IX[B]=0A= [15] -1 0x00001000 - 0x0000101f (0x20) IX[B]=0A= [16] -1 0x00001020 - 0x0000102f (0x10) IX[B]=0A= [17] 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU)=0A= [18] 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU)=0A= (--) SAVAGE(0): mapping framebuffer @ 0xf0000000 with size 0x800000=0A= (=3D=3D) SAVAGE(0): Write-combining range (0xf0000000,0x800000)=0A= (--) SAVAGE(0): Chose mode 118 at 85Hz.=0A= (II) SAVAGE(0): Using 1279 lines for offscreen memory.=0A= (II) SAVAGE(0): Using XFree86 Acceleration Architecture (XAA)=0A= Screen to screen bit blits=0A= Solid filled rectangles=0A= 8x8 mono pattern filled rectangles=0A= 8x8 color pattern filled rectangles=0A= Indirect CPU to Screen color expansion=0A= Solid Lines=0A= Image Writes=0A= Offscreen Pixmaps=0A= Setting up tile and stipple cache:=0A= 32 128x128 slots=0A= 10 256x256 slots=0A= 32 8x8 color pattern slots=0A= (=3D=3D) SAVAGE(0): Backing store disabled=0A= (**) Option "dpms"=0A= (**) SAVAGE(0): DPMS enabled=0A= (II) Initializing built-in extension MIT-SHM=0A= (II) Initializing built-in extension XInputExtension=0A= (II) Initializing built-in extension XTEST=0A= (II) Initializing built-in extension XKEYBOARD=0A= (II) Initializing built-in extension LBX=0A= (II) Initializing built-in extension XC-APPGROUP=0A= (II) Initializing built-in extension SECURITY=0A= (II) Initializing built-in extension XINERAMA=0A= (II) Initializing built-in extension XFree86-Bigfont=0A= (II) Initializing built-in extension RENDER=0A= (**) Option "Protocol" "PS/2"=0A= (**) Mouse0: Protocol: "PS/2"=0A= (**) Option "CorePointer"=0A= (**) Mouse0: Core Pointer=0A= (**) Option "Device" "/dev/psaux"=0A= (=3D=3D) Mouse0: Buttons: 3=0A= (**) Option "Emulate3Buttons" "no"=0A= (**) Option "ZAxisMapping" "4 5"=0A= (**) Mouse0: ZAxisMapping: buttons 4 and 5=0A= (II) Keyboard "Keyboard0" handled by legacy driver=0A= (II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE)=0A= Could not init font path element unix/:7100, removing from list!=0A= =0A= Fatal server error:=0A= could not open default font 'fixed'=0A= =0A= When reporting a problem related to a server crash, please send=0A= the full server output, not just the last messages.=0A= This can be found in the log file "/var/log/XFree86.0.log".=0A= Please report problems to xfree86@xfree86.org.=0A= =0A= ------=_NextPart_000_0019_01C1F5B2.C9170F40--
