On Mon, 3 Jun 2024 at 13:21, Yuval El-Hanany <yuvale@xxxxxxxxxxx> wrote:
>
> Thanks Magnus,
> see inline…
>
> P.S.
> For now setting the locks still results in a crash in the map flush. I think I need to lock adding to the flush lists, but I’ll keep trying. I’m setting locks only for the read and not send, as for send we always send on the same queue as the current CPU I believe.
Yes, you need to add locking to the flush too since it touches the
user-space rings.
>
> > On 3 Jun 2024, at 11:35, Magnus Karlsson <magnus.karlsson@xxxxxxxxx> wrote:
> >
> > CAUTION:External Email, Do not click on links or open attachments unless you recognize the sender and know the content is safe.
> >
> > On Fri, 31 May 2024 at 23:29, Yuval El-Hanany <YuvalE@xxxxxxxxxxx> wrote:
> >>
> >> Hi Magnus,
> >> thanks for the guidance, that’s extremely helpful. I’ll try to implement it soon with spin locks, and see later if I can add some low impact lockless mechanism. You don’t reckon, adding a configuration flag to the socket that would enable multi providers with spin locks, is an acceptable solution? By default it would be lockless and block multi providers. Later it can be upgraded to a better solution if there’s a better multiproducer solution.
> >
> > That is a possible solution, though something that would have to be
> > sent to bpf-next as a new feature. Maybe static branches could be used
> > to not hurt performance when it is turned off.
> Sounds good to me.
> >
> >> I’m attaching my patch for adding the receive queue to the xdp_frame so it is updated after cpumap. I’ve tested it and it works as far as reconstructing the rx queue. I don’t know if you still consider it necessary, but currently the rx queue is not set to any value, so its value is undefined after cpumap redirect. It is possible that the undefined rx queue will match the one attached to the socket and then the test for umem would be true I think. May be it should be set to -1 (and define -1 as CPUMAP receive queue) after reconstructing from xdp_frame? That would block the test. I should probably use a different default value other than 0 (which is an acceptable rx queue), though I’m not sure there’s a code flow that doesn’t set rxq, so it may be just a robustness condition.
> >
> > Is it not set to 0 by the following code?
> >
> > static int cpu_map_bpf_prog_run_xdp(struct bpf_cpu_map_entry *rcpu,
> > void **frames, int n,
> > struct xdp_cpumap_stats *stats)
> > {
> > struct xdp_rxq_info rxq = {};
> >
> > Looks good in general. Some comments and questions below.
> The init is not in 5.15.115 and 6.6.8. I’ll need to check the latest. However, it will set the receive queue to 0. So wouldn’t you still be able to send from any CPU to the 0 queue?
You are correct. If we have bound queue_index 0 to a process running
on core 4 it could run at the same time as this CPUMAP thread on for
example core 2 and then we would be in the same trouble again. So we
need to disallow it. Could we introduce a test in
cpu_map_bpf_prog_run_xdp() to check if it is a XSKMAP redirect and in
that case throw an error? If that is possible, then we do not need to
pass the queue_index to fix the bug at least. Would make it a simpler
fix.
> >
> >> Cheers,
> >> Yuval.
> >>
> >> diff -urN a/include/net/xdp.h b/include/net/xdp.h
> >> --- a/include/net/xdp.h 2023-06-05 07:21:27.000000000 +0000
> >> +++ b/include/net/xdp.h 2024-05-29 13:07:09.671697479 +0000
> >> @@ -117,6 +117,7 @@
> >> u16 headroom;
> >> u32 metasize:8;
> >> u32 frame_sz:24;
> >> + u32 rx_queue_index; /* Use when unpacking to xdp_buff in cpumap. */
> >> /* Lifetime of xdp_rxq_info is limited to NAPI/enqueue time,
> >> * while mem info is valid on remote CPU.
> >> */
> >> @@ -180,6 +181,10 @@
> >> xdp->data_end = frame->data + frame->len;
> >> xdp->data_meta = frame->data - frame->metasize;
> >> xdp->frame_sz = frame->frame_sz;
> >> + if (xdp->rxq != NULL)
> >
> > When can the rxq be NULL?
> I added it for robustness, I couldn’t find a code flow where it could be NULL (theoretically rxq for CPUMAP redirect is a hack which results in these issues, but that’s sort of the point).
Then I would skip it. Somebody out there like Toke or Jesper that
knows this code well could probably enlight us if this will ever
happen. And if it crashes, someone will tell us quickly :-).
> >
> >> + {
> >> + xdp->rxq->queue_index = frame->rx_queue_index;
> >> + }
> >> }
> >>
> >> static inline
> >> @@ -206,6 +211,7 @@
> >> xdp_frame->headroom = headroom - sizeof(*xdp_frame);
> >> xdp_frame->metasize = metasize;
> >> xdp_frame->frame_sz = xdp->frame_sz;
> >> + xdp_frame->rx_queue_index = (xdp->rxq != NULL) ? xdp->rxq->queue_index : 0;
> >>
> >> return 0;
> >> }
> >> @@ -226,6 +232,7 @@
> >>
> >> /* rxq only valid until napi_schedule ends, convert to xdp_mem_info */
> >> xdp_frame->mem = xdp->rxq->mem;
> >> + xdp_frame->rx_queue_index = xdp->rxq->queue_index;
> >
> > Is it enough just to put this assignment in the function above?
> Looking at current usage, xdp_update_frame_from_buff is only called after running a BPF program. I guess a BPF program is not supposed to update the queue index, so the first update is really redundant.
> >
> >> return xdp_frame;
> >> }
> >> diff -urN a/net/core/xdp.c b/net/core/xdp.c
> >> --- a/net/core/xdp.c 2023-06-05 07:21:27.000000000 +0000
> >> +++ b/net/core/xdp.c 2024-05-29 13:08:08.880456973 +0000
> >> @@ -536,6 +536,7 @@
> >> xdpf->metasize = metasize;
> >> xdpf->frame_sz = PAGE_SIZE;
> >> xdpf->mem.type = MEM_TYPE_PAGE_ORDER0;
> >> + xdpf->rx_queue_index = (xdp->rxq != NULL) ? xdp->rxq->queue_index : 0;
> >>
> >> xsk_buff_free(xdp);
> >> return xdpf;
> >>
> >>> On 30 May 2024, at 10:55, Magnus Karlsson <magnus.karlsson@xxxxxxxxx> wrote:
> >>>
> >>> CAUTION:External Email, Do not click on links or open attachments unless you recognize the sender and know the content is safe.
> >>>
> >>> On Wed, 29 May 2024 at 17:18, Yuval El-Hanany <yuvale@xxxxxxxxxxx> wrote:
> >>>>
> >>>> Ouch,
> >>>> not what I was hoping for :-(. I’m gonna think about it myself. You would still need to disable XSK redirect from a CPUMAP XDP program. The rx_queue_index would be of the originating CPU (if we still fix the rx_queue_index but it can’t be left as is anyhow), and XSK redirect would be able to feed to the same queue from different CPUs, if I understand the architecture correctly.
> >>>>
> >>>> I’ll try to add locking and see the performance hit. It’s only the XSK redirect target that would need a lock? May be add a flag to the socket or umem that allows multicpu access and introduces a lock? I really wanna get this working. For my use case, it would be the optimal solution. I might even go for a private kernel if there’s no way to get it in production kernel.
> >>>
> >>> You would need to add a spinlock in __xsk_rcv_zc(), __xsk_rcv() (for
> >>> skb mode), and xsk_flush(). Basically to all functions that access the
> >>> ring, i.e. uses functions that start with xskq_ that need to be
> >>> protected. To get anything like this into the standard kernel, the
> >>> spinlocks would have to be disabled (since they are costly) when only
> >>> one kthread/napi id is using the socket, but enabled when two or more
> >>> kthreads decide to redirect to the same socket. Since sockets can be
> >>> added dynamically to the XSKMAP and the presence of multiple sockets
> >>> in the XSKMAP does not mean that they will all be accessed by a napi
> >>> instance, this complicates the implementation a lot. I really do not
> >>> want to hurt the performance of the common case that we have today.
> >>> But a private patch seems doable.
> >>>
> >>> Another option would be to find a way to do a lock-less multi-producer
> >>> / single-consumer queue using the current interface on the consumer /
> >>> user-space side. Do not know if this is possible though. It was tricky
> >>> enough to get the current SPSC ring correct on all architectures. A
> >>> MPSC ring will be harder. Adding spin-locks would be a lot simpler.
> >>>
> >>>>
> >>>> Thanks,
> >>>> Yuval.
> >>>>
> >>>>> On 29 May 2024, at 16:25, Magnus Karlsson <magnus.karlsson@xxxxxxxxx> wrote:
> >>>>>
> >>>>> CAUTION:External Email, Do not click on links or open attachments unless you recognize the sender and know the content is safe.
> >>>>>
> >>>>> On Wed, 29 May 2024 at 13:07, Magnus Karlsson <magnus.karlsson@xxxxxxxxx> wrote:
> >>>>>>
> >>>>>> On Wed, 29 May 2024 at 11:08, Yuval El-Hanany <YuvalE@xxxxxxxxxxx> wrote:
> >>>>>>>
> >>>>>>> Hi,
> >>>>>>> I got kernel panic on Kernel 5.15.117 (with the shared umem kernel patch). The scenario was simple. Instead of redirecting to a different cpu using CPUMAP, I’ve tried redirecting traffic from a CPU core to a different CPU core using XSK sockets. I used 2 cores. When each redirected to the other, all worked well. When redirecting traffic from both cores to one core, I got a kernel panic almost immediately under load. The flush_list seems to be per cpu, but somehow it’s messed up when two cores access the it?
> >>>>>>>
> >>>>>>> Thanks,
> >>>>>>> Yuval.
> >>>>>>
> >>>>>> Thanks Yuval. Will take a look at it.
> >>>>>
> >>>>> I think the sad conclusion here is that I need to revert the patch
> >>>>> that I sent to you. The problem is that the rings between user-space
> >>>>> and kernel-space are single producer / single consumer and allowing
> >>>>> two or more NAPI threads to access the same ring by performing a
> >>>>> redirect to the same socket at the same time will break this. The
> >>>>> flush is likely solvable, but the addition of entries to the same ring
> >>>>> would require introducing locking (or a completely new ring type)
> >>>>> which is going to be way too expensive. With the old code, checking
> >>>>> that the queue_index of the queue it got the packet on being equal to
> >>>>> the socket's queue_index would disallow this and not trigger this
> >>>>> problem.
> >>>>>
> >>>>> I have no idea why I did not think about this earlier. My sincere
> >>>>> apologies for that. I will scratch my head for a while more, but I am
> >>>>> not hopeful that I will come up with a good solution for this.
> >>>>>
> >>>>>>> Two different dumps.
> >>>>>>>
> >>>>>>> Dump 1:
> >>>>>>>
> >>>>>>> 2024-05-29T01:[ 306.997548] BUG: kernel NULL pointer dereference, address: 0000000000000008
> >>>>>>> [ 307.088372] #PF: supervisor read access in kernel mode
> >>>>>>> [ 307.149079] #PF: error_code(0x0000) - not-present page
> >>>>>>> [ 307.209774] PGD 10f131067 P4D 10f131067 PUD 102642067 PMD 0
> >>>>>>> [ 307.276608] Oops: 0000 [#1] SMP
> >>>>>>> [ 307.313712] CPU: 3 PID: 1919 Comm: sp1 Tainted: P OE 5.15.117-1-ULP-NG #1
> >>>>>>> [ 307.408219] Hardware name: Radware Radware/Default string, BIOS 5.25 (785A.015) 05/11/2023
> >>>>>>> [ 307.505779] RIP: 0010:xsk_flush+0xb/0x40
> >>>>>>> [ 307.552099] Code: a0 03 00 00 01 b8 e4 ff ff ff eb dc 49 83 85 a0 03 00 00 01 b8 e4 ff ff ff eb cd 0f 1f 40 00 48 8b 87 40 03 00 00 55 48 89 e5 <8b> 50 08 48 8b 40 10 89 10 48 8b 87 68 03 00 00 48 8b 80 80 00 00
> >>>>>>> [ 307.773694] RSP: 0000:ffffb7ae01037c80 EFLAGS: 00010287
> >>>>>>> [ 307.835401] RAX: 0000000000000000 RBX: ffffa0a88f8ab768 RCX: ffffa0a88f8abac0
> >>>>>>> [ 307.919670] RDX: ffffa0a88f8abac0 RSI: 0000000000000004 RDI: ffffa0a88f8ab768
> >>>>>>> [ 308.003922] RBP: ffffb7ae01037c80 R08: ffffa0a10b3e0000 R09: 000000000000769f
> >>>>>>> [ 308.088172] R10: ffffa0a1035ca000 R11: 000000000d7f9180 R12: ffffa0a88f8ab768
> >>>>>>> [ 308.172405] R13: ffffa0a88f8ebac0 R14: ffffa0a2ef135300 R15: 0000000000000155
> >>>>>>> [ 308.256635] FS: 00007ffff7e97a80(0000) GS:ffffa0a88f8c0000(0000) knlGS:0000000000000000
> >>>>>>> [ 308.352186] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
> >>>>>>> [ 308.420043] CR2: 0000000000000008 CR3: 000000010cf6e000 CR4: 0000000000750ee0
> >>>>>>> [ 308.504309] PKRU: 55555554
> >>>>>>> [ 308.536296] Call Trace:
> >>>>>>> [ 308.565209] <TASK>
> >>>>>>> [ 308.590026] ? show_regs+0x56/0x60
> >>>>>>> [ 308.630218] ? __die_body+0x1a/0x60
> >>>>>>> [ 308.671433] ? __die+0x25/0x30
> >>>>>>> [ 308.707529] ? page_fault_oops+0xc0/0x440
> >>>>>>> [ 308.754897] ? do_sys_poll+0x47c/0x5e0
> >>>>>>> [ 308.799188] ? do_user_addr_fault+0x319/0x6e0
> >>>>>>> [ 308.850659] ? exc_page_fault+0x6c/0x130
> >>>>>>> [ 308.896992] ? asm_exc_page_fault+0x27/0x30
> >>>>>>> [ 308.946398] ? xsk_flush+0xb/0x40
> >>>>>>> [ 308.985546] __xsk_map_flush+0x3a/0x80
> >>>>>>> [ 309.029824] xdp_do_flush+0x13/0x20
> >>>>>>> [ 309.071043] i40e_finalize_xdp_rx+0x44/0x50 [i40e]
> >>>>>>> 56:07-08:00 NOTI[ 309.127653] i40e_clean_rx_irq_zc+0x132/0x500 [i40e]
> >>>>>>> [ 309.202736] i40e_napi_poll+0x119/0x1270 [i40e]
> >>>>>>> CE slb: real se[ 309.256285] ? xsk_sendmsg+0xf4/0x100
> >>>>>>> [ 309.315969] ? sock_sendmsg+0x2e/0x40
> >>>>>>> [ 309.359244] __napi_poll+0x23/0x160
> >>>>>>> [ 309.400482] net_rx_action+0x232/0x290
> >>>>>>> [ 309.444778] __do_softirq+0xd0/0x270
> >>>>>>> [ 309.487012] irq_exit_rcu+0x74/0xa0
> >>>>>>> [ 309.528241] common_interrupt+0x83/0xa0
> >>>>>>> [ 309.573577] asm_common_interrupt+0x27/0x40
> >>>>>>> [ 309.623017] RIP: 0033:0x5cb685
> >>>>>>> [ 309.659115] Code: b0 fb ff ff 48 8b 8d b8 fb ff ff 44 89 f8 23 44 91 08 74 09 31 d2 89 d1 e9 22 fe ff ff 83 85 88 fb ff ff 01 8b 95 88 fb ff ff <39> 15 79 31 1d 04 0f 87 c3 fd ff ff 4c 8b 9d b8 fb ff ff e9 a2 f8
> >>>>>>> [ 309.880853] RSP: 002b:00007fffffffd820 EFLAGS: 00000206
> >>>>>>> [ 309.942608] RAX: 0000000000000000 RBX: 0000000000000047 RCX: 00000000050912bc
> >>>>>>> [ 310.026922] RDX: 0000000000000033 RSI: 0000000000000000 RDI: 0000000000000001
> >>>>>>> [ 310.111228] RBP: 00007fffffffdd50 R08: 0000000000000001 R09: 0000000000000008
> >>>>>>> [ 310.195548] R10: 0000000002f68e00 R11: 00000000050912bc R12: 0000000000000047
> >>>>>>> [ 310.279877] R13: 0000000000000022 R14: 0000000004f08560 R15: 00000000ff55557f
> >>>>>>> [ 310.364168] </TASK>
> >>>>>>> [ 310.390014] Modules linked in: uio i40e ec(PO) evdev ncs_acpi(O) bonding sr_mod cdrom usb_storage dwmac_intel stmmac i2c_i801 pcs_xpcs phylink i2c_smbus [last unloaded: i40e]
> >>>>>>> rvice r5, IP 4.4[ 310.573779] CR2: 0000000000000008
> >>>>>>> [ 310.629359] ---[ end trace 78cf9f96f477759d ]---
> >>>>>>> .4.5:80 operational, affected virt 2.2.2.10
> >>>>>>>
> >>>>>>> Dump 2:
> >>>>>>>
> >>>>>>> 2024-05-29T01:56:07-08:00 NOTICE slb: real serve[ 311.250217] RIP: 0010:xsk_flush+0xb/0x40
> >>>>>>> [ 311.300334] Code: a0 03 00 00 01 b8 e4 ff ff ff eb dc 49 83 85 a0 03 00 00 01 b8 e4 ff ff ff eb cd 0f 1f 40 00 48 8b 87 40 03 00 00 55 48 89 e5 <8b> 50 08 48 8b 40 10 89 10 48 8b 87 68 03 00 00 48 8b 80 80 00 00
> >>>>>>> [ 311.522070] RSP: 0000:ffffb7ae01037c80 EFLAGS: 00010287
> >>>>>>> [ 311.583811] RAX: 0000000000000000 RBX: ffffa0a88f8ab768 RCX: ffffa0a88f8abac0
> >>>>>>> [ 311.668118] RDX: ffffa0a88f8abac0 RSI: 0000000000000004 RDI: ffffa0a88f8ab768
> >>>>>>> [ 311.752405] RBP: ffffb7ae01037c80 R08: ffffa0a10b3e0000 R09: 000000000000769f
> >>>>>>> [ 311.836716] R10: ffffa0a1035ca000 R11: 000000000d7f9180 R12: ffffa0a88f8ab768
> >>>>>>> [ 311.921040] R13: ffffa0a88f8ebac0 R14: ffffa0a2ef135300 R15: 0000000000000155
> >>>>>>> [ 312.005358] FS: 00007ffff7e97a80(0000) GS:ffffa0a88f8c0000(0000) knlGS:0000000000000000
> >>>>>>> [ 312.100975] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
> >>>>>>> [ 312.168886] CR2: 0000000000000008 CR3: 000000010cf6e000 CR4: 0000000000750ee0
> >>>>>>> [ 312.253232] PKRU: 55555554
> >>>>>>> [ 312.285245] Kernel panic - not syncing: Fatal exception in interrupt
> >>>>>>> [ 312.360323] Kernel Offset: 0x3a000000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff)
> >>>>>>> [ 312.570739] ---[ end Kernel panic - not syncing: Fatal exception in interrupt ]---
> >>>>>>>
> >>>>>>>
> >>>>>>>
> >>>>>>> 2024-05-29T01:00:47-08:00 NOTICE slb: real service r16, IP 4.4.4.16:80 operational, affected [ 390.602501] BUG: kernel NULL pointer dereference, address: 0000000000000008
> >>>>>>> [ 390.699875] #PF: supervisor read access in kernel mode
> >>>>>>> [ 390.760620] #PF: error_code(0x0000) - not-present page
> >>>>>>> [ 390.821361] PGD 10d319067 P4D 10d319067 PUD 10df94067 PMD 0
> >>>>>>> [ 390.888266] Oops: 0000 [#1] SMP
> >>>>>>> [ 390.925409] CPU: 3 PID: 1922 Comm: sp1 Tainted: P OE 5.15.117-1-ULP-NG #1
> >>>>>>> [ 391.020040] Hardware name: Radware Radware/Default string, BIOS 5.25 (785A.015) 05/11/2023
> >>>>>>> [ 391.117759] RIP: 0010:xsk_flush+0xb/0x40
> >>>>>>> [ 391.164147] Code: a0 03 00 00 01 b8 e4 ff ff ff eb dc 49 83 85 a0 03 00 00 01 b8 e4 ff ff ff eb cd 0f 1f 40 00 48 8b 87 40 03 00 00 55 48 89 e5 <8b> 50 08 48 8b 40 10 89 10 48 8b 87 68 03 00 00 48 8b 80 80 00 00
> >>>>>>> [ 391.386008] RSP: 0018:ffffae5c80244d48 EFLAGS: 00010287
> >>>>>>> [ 391.447793] RAX: 0000000000000000 RBX: ffff8bb80f8ab768 RCX: ffff8bb80f8abac0
> >>>>>>> [ 391.532161] RDX: ffff8bb80f8abac0 RSI: 0000000000000004 RDI: ffff8bb80f8ab768
> >>>>>>> [ 391.616518] RBP: ffffae5c80244d48 R08: ffff8bb0845f0000 R09: 000000000000967a
> >>>>>>> [ 391.700883] R10: ffff8bb0833fdc00 R11: 000000000ca5a180 R12: ffff8bb80f8ab768
> >>>>>>> [ 391.785233] R13: ffff8bb80f8ebac0 R14: ffff8bb081571b00 R15: 0000000000000132
> >>>>>>> [ 391.869615] FS: 00007ffff7e97a80(0000) GS:ffff8bb80f8c0000(0000) knlGS:0000000000000000
> >>>>>>> [ 391.965273] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
> >>>>>>> [ 392.033224] CR2: 0000000000000008 CR3: 000000010d84b000 CR4: 0000000000750ee0
> >>>>>>> [ 392.117580] PKRU: 55555554
> >>>>>>> [ 392.149594] Call Trace:
> >>>>>>> [ 392.178536] <IRQ>
> >>>>>>> [ 392.202345] ? show_regs+0x56/0x60
> >>>>>>> [ 392.242571] ? __die_body+0x1a/0x60
> >>>>>>> [ 392.283806] ? __die+0x25/0x30
> >>>>>>> [ 392.319919] ? page_fault_oops+0xc0/0x440
> >>>>>>> [ 392.367315] ? i40e_msix_clean_rings+0x27/0x40 [i40e]
> >>>>>>> [ 392.427035] ? do_user_addr_fault+0x319/0x6e0
> >>>>>>> [ 392.478538] ? handle_irq_event+0x41/0x60
> >>>>>>> [ 392.525934] ? exc_page_fault+0x6c/0x130
> >>>>>>> [ 392.572304] ? asm_exc_page_fault+0x27/0x30
> >>>>>>> [ 392.621771] ? xsk_flush+0xb/0x40
> >>>>>>> [ 392.660954] ? xsk_flush+0x34/0x40
> >>>>>>> [ 392.701174] __xsk_map_flush+0x3a/0x80
> >>>>>>> [ 392.745497] xdp_do_flush+0x13/0x20
> >>>>>>> [ 392.786749] i40e_finalize_xdp_rx+0x44/0x50 [i40e]
> >>>>>>> virt 2.2.2.10
> >>>>>>> [ 392.843370] i40e_clean_rx_irq_zc+0x132/0x500 [i40e]
> >>>>>>> [ 392.918465] i40e_napi_poll+0x119/0x1270 [i40e]
> >>>>>>>
> >>>>>>> 2024-05-29T01:0[ 392.972027] ? scheduler_tick+0x9f/0xd0
> >>>>>>> [ 393.033806] ? tick_sched_do_timer+0x40/0x40
> >>>>>>> [ 393.084300] __napi_poll+0x23/0x160
> >>>>>>> [ 393.125556] net_rx_action+0x232/0x290
> >>>>>>> [ 393.169869] __do_softirq+0xd0/0x270
> >>>>>>> [ 393.212141] irq_exit_rcu+0x74/0xa0
> >>>>>>> [ 393.253387] common_interrupt+0x62/0xa0
> >>>>>>> [ 393.298734] </IRQ>
> >>>>>>> [ 393.323571] <TASK>
> >>>>>>> [ 393.348409] asm_common_interrupt+0x27/0x40
> >>>>>>> [ 393.397871] RIP: 0010:__fget_light+0x43/0x100
> >>>>>>> [ 393.449396] Code: b0 0b 00 00 8b 08 83 f9 01 75 36 48 8b 40 20 8b 18 39 df 73 1f 89 fa 48 39 da 48 19 db 48 8b 40 08 21 df 48 8d 04 f8 48 8b 00 <48> 85 c0 74 05 85 70 44 74 02 31 c0 5b 41 5c 41 5d 41 5e 41 5f 5d
> >>>>>>> [ 393.671279] RSP: 0018:ffffae5c81057a98 EFLAGS: 00000202
> >>>>>>> [ 393.733054] RAX: ffff8bb083541100 RBX: ffffffffffffffff RCX: 0000000000000001
> >>>>>>> [ 393.817413] RDX: 000000000000002f RSI: 0000000000004000 RDI: 000000000000002f
> >>>>>>> [ 393.901777] RBP: ffffae5c81057ac0 R08: 000000010000002f R09: 0000000000000000
> >>>>>>> [ 393.986133] R10: ffffae5c81057f08 R11: 0000000000000000 R12: 0000000000000000
> >>>>>>> [ 394.070506] R13: ffffae5c81057b54 R14: ffffae5c81057b4c R15: ffffae5c81057b4c
> >>>>>>> [ 394.154884] __fdget+0xe/0x10
> >>>>>>> [ 394.189993] do_sys_poll+0x1fd/0x5e0
> >>>>>>> [ 394.232287] ? step_into+0x11f/0x750
> >>>>>>> [ 394.274570] ? common_interrupt+0x8e/0xa0
> >>>>>>> [ 394.321987] ? common_interrupt+0x8e/0xa0
> >>>>>>> [ 394.369406] ? asm_common_interrupt+0x27/0x40
> >>>>>>> [ 394.420929] ? xsk_flush+0x34/0x40
> >>>>>>> [ 394.461166] ? xsk_tx_peek_release_desc_batch+0x24c/0x2e0
> >>>>>>> [ 394.525014] ? i40e_clean_rx_irq_zc+0x342/0x500 [i40e]
> >>>>>>> [ 394.585763] ? i40e_xsk_wakeup+0xa2/0xc0 [i40e]
> >>>>>>> [ 394.639332] ? xsk_xmit+0x6d/0x6c0
> >>>>>>> [ 394.679569] ? i40e_napi_poll+0xc39/0x1270 [i40e]
> >>>>>>> [ 394.735202] ? xsk_sendmsg+0xf4/0x100
> >>>>>>> [ 394.778498] ? sock_sendmsg+0x2e/0x40
> >>>>>>> [ 394.821808] ? __sys_sendto+0x13a/0x170
> >>>>>>> [ 394.867166] ? __snd_timer_user_ioctl+0x9e0/0xaa0
> >>>>>>> [ 394.922812] ? net_rx_action+0x232/0x290
> >>>>>>> [ 394.969206] __x64_sys_poll+0xa0/0x130
> >>>>>>> [ 395.013534] ? __x64_sys_poll+0xa0/0x130
> >>>>>>> [ 395.059930] do_syscall_64+0x34/0xb0
> >>>>>>> [ 395.102213] entry_SYSCALL_64_after_hwframe+0x44/0xae
> >>>>>>> [ 395.161948] RIP: 0033:0x7ffff76f0d47
> >>>>>>> [ 395.204222] Code: 00 00 00 5b 49 8b 45 10 5d 41 5c 41 5d 41 5e c3 0f 1f 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 07 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 89 54 24 1c 48 89 74 24 10
> >>>>>>> [ 395.426119] RSP: 002b:00007fffffffe6c8 EFLAGS: 00000246 ORIG_RAX: 0000000000000007
> >>>>>>> [ 395.515625] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007ffff76f0d47
> >>>>>>> [ 395.599996] RDX: 0000000000000000 RSI: 0000000000000001 RDI: 00007fffffffe6f8
> >>>>>>> [ 395.684371] RBP: 00007ffff7e85f80 R08: 00000000173eed80 R09: 0000000000000051
> >>>>>>> [ 395.768741] R10: 000001193c2583df R11: 0000000000000246 R12: 0000000000000000
> >>>>>>> [ 395.853108] R13: 00007ffff7e85fb0 R14: 0000000000000000 R15: 0000000000000000
> >>>>>>> [ 395.937488] </TASK>
> >>>>>>> [ 395.963347] Modules linked in: uio i40e ec(PO) evdev ncs_acpi(O) bonding sr_mod cdrom usb_storage dwmac_intel stmmac i2c_i801 pcs_xpcs phylink i2c_smbus [last unloaded: i40e]
> >>>>>>> 0:47-08:00 NOTIC[ 396.147236] CR2: 0000000000000008
> >>>>>>> [ 396.202839] ---[ end trace 9b309a97c006510f ]---
> >>>>>>> E slb: real server r16, IP 4.4.4.16 operational
> >>>>>>>
> >>>>>>> 2024-05-29T01:00:47-08:00 NOTICE slb: real [ 396.344228] RIP: 0010:xsk_flush+0xb/0x40
> >>>>>>> [ 396.406975] Code: a0 03 00 00 01 b8 e4 ff ff ff eb dc 49 83 85 a0 03 00 00 01 b8 e4 ff ff ff eb cd 0f 1f 40 00 48 8b 87 40 03 00 00 55 48 89 e5 <8b> 50 08 48 8b 40 10 89 10 48 8b 87 68 03 00 00 48 8b 80 80 00 00
> >>>>>>> [ 396.628859] RSP: 0018:ffffae5c80244d48 EFLAGS: 00010287
> >>>>>>> [ 396.690632] RAX: 0000000000000000 RBX: ffff8bb80f8ab768 RCX: ffff8bb80f8abac0
> >>>>>>> [ 396.774985] RDX: ffff8bb80f8abac0 RSI: 0000000000000004 RDI: ffff8bb80f8ab768
> >>>>>>> [ 396.859346] RBP: ffffae5c80244d48 R08: ffff8bb0845f0000 R09: 000000000000967a
> >>>>>>> [ 396.943694] R10: ffff8bb0833fdc00 R11: 000000000ca5a180 R12: ffff8bb80f8ab768
> >>>>>>> [ 397.028064] R13: ffff8bb80f8ebac0 R14: ffff8bb081571b00 R15: 0000000000000132
> >>>>>>> [ 397.112433] FS: 00007ffff7e97a80(0000) GS:ffff8bb80f8c0000(0000) knlGS:0000000000000000
> >>>>>>> [ 397.208103] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
> >>>>>>> [ 397.276061] CR2: 0000000000000008 CR3: 000000010d84b000 CR4: 0000000000750ee0
> >>>>>>> [ 397.360414] PKRU: 55555554
> >>>>>>> [ 397.392419] Kernel panic - not syncing: Fatal exception in interrupt
> >>>>>>> [ 397.467554] Kernel Offset: 0x34600000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff)
> >>>>>>> [ 397.678387] ---[ end Kernel panic - not syncing: Fatal exception in interrupt ]---
>
>
|