On Wed, Aug 7, 2019 at 5:37 AM Jesper Dangaard Brouer <brouer@xxxxxxxxxx> wrote:
>
> This address the TODO in samples/bpf/xdp_fwd_kern.c, which points out
> that the chosen egress index should be checked for existence in the
> devmap. This can now be done via taking advantage of Toke's work in
> commit 0cdbb4b09a06 ("devmap: Allow map lookups from eBPF").
>
> This change makes xdp_fwd more practically usable, as this allows for
> a mixed environment, where IP-forwarding fallback to network stack, if
> the egress device isn't configured to use XDP.
>
> Signed-off-by: Jesper Dangaard Brouer <brouer@xxxxxxxxxx>
> ---
> samples/bpf/xdp_fwd_kern.c | 20 ++++++++++++++------
> samples/bpf/xdp_fwd_user.c | 36 +++++++++++++++++++++++++-----------
> 2 files changed, 39 insertions(+), 17 deletions(-)
>
> diff --git a/samples/bpf/xdp_fwd_kern.c b/samples/bpf/xdp_fwd_kern.c
> index e6ffc4ea06f4..4a5ad381ed2a 100644
> --- a/samples/bpf/xdp_fwd_kern.c
> +++ b/samples/bpf/xdp_fwd_kern.c
> @@ -104,13 +104,21 @@ static __always_inline int xdp_fwd_flags(struct xdp_md *ctx, u32 flags)
>
> rc = bpf_fib_lookup(ctx, &fib_params, sizeof(fib_params), flags);
>
> - /* verify egress index has xdp support
> - * TO-DO bpf_map_lookup_elem(&tx_port, &key) fails with
> - * cannot pass map_type 14 into func bpf_map_lookup_elem#1:
> - * NOTE: without verification that egress index supports XDP
> - * forwarding packets are dropped.
> - */
> if (rc == 0) {
> + int *val;
> +
> + /* Verify egress index has been configured as TX-port.
> + * (Note: User can still have inserted an egress ifindex that
> + * doesn't support XDP xmit, which will result in packet drops).
> + *
> + * Note: lookup in devmap supported since 0cdbb4b09a0.
> + * If not supported will fail with:
> + * cannot pass map_type 14 into func bpf_map_lookup_elem#1:
> + */
> + val = bpf_map_lookup_elem(&tx_port, &fib_params.ifindex);
It should be "xdp_tx_ports". Otherwise, you will have compilation errors.
> + if (!val)
> + return XDP_PASS;
Also, maybe we can do
if (!bpf_map_lookup_elem(&tx_port, &fib_params.ifindex))
return XDP_PASS;
so we do not need to define val at all.
> +
> if (h_proto == htons(ETH_P_IP))
> ip_decrease_ttl(iph);
> else if (h_proto == htons(ETH_P_IPV6))
> diff --git a/samples/bpf/xdp_fwd_user.c b/samples/bpf/xdp_fwd_user.c
> index ba012d9f93dd..20951bc27477 100644
> --- a/samples/bpf/xdp_fwd_user.c
> +++ b/samples/bpf/xdp_fwd_user.c
> @@ -27,14 +27,20 @@
> #include "libbpf.h"
> #include <bpf/bpf.h>
>
> -
> -static int do_attach(int idx, int fd, const char *name)
> +static int do_attach(int idx, int prog_fd, int map_fd, const char *name)
> {
> int err;
>
> - err = bpf_set_link_xdp_fd(idx, fd, 0);
> - if (err < 0)
> + err = bpf_set_link_xdp_fd(idx, prog_fd, 0);
> + if (err < 0) {
> printf("ERROR: failed to attach program to %s\n", name);
> + return err;
> + }
> +
> + /* Adding ifindex as a possible egress TX port */
> + err = bpf_map_update_elem(map_fd, &idx, &idx, 0);
> + if (err)
> + printf("ERROR: failed using device %s as TX-port\n", name);
>
> return err;
> }
> @@ -47,6 +53,9 @@ static int do_detach(int idx, const char *name)
> if (err < 0)
> printf("ERROR: failed to detach program from %s\n", name);
>
> + /* TODO: Remember to cleanup map, when adding use of shared map
> + * bpf_map_delete_elem((map_fd, &idx);
> + */
> return err;
> }
>
> @@ -67,10 +76,10 @@ int main(int argc, char **argv)
> };
> const char *prog_name = "xdp_fwd";
> struct bpf_program *prog;
> + int prog_fd, map_fd = -1;
> char filename[PATH_MAX];
> struct bpf_object *obj;
> int opt, i, idx, err;
> - int prog_fd, map_fd;
> int attach = 1;
> int ret = 0;
>
> @@ -103,8 +112,17 @@ int main(int argc, char **argv)
> return 1;
> }
>
> - if (bpf_prog_load_xattr(&prog_load_attr, &obj, &prog_fd))
> + err = bpf_prog_load_xattr(&prog_load_attr, &obj, &prog_fd);
> + if (err) {
> + if (err == -22) {
-EINVAL?
For -EINVAL, many things could go wrong. But maybe the blow error
is the most common one so I am fine with that.
> + printf("Does kernel support devmap lookup?\n");
> + /* If not, the error message will be:
> + * "cannot pass map_type 14 into func
> + * bpf_map_lookup_elem#1"
> + */
> + }
> return 1;
> + }
>
> prog = bpf_object__find_program_by_title(obj, prog_name);
> prog_fd = bpf_program__fd(prog);
> @@ -119,10 +137,6 @@ int main(int argc, char **argv)
> return 1;
> }
> }
> - if (attach) {
> - for (i = 1; i < 64; ++i)
> - bpf_map_update_elem(map_fd, &i, &i, 0);
> - }
>
> for (i = optind; i < argc; ++i) {
> idx = if_nametoindex(argv[i]);
> @@ -138,7 +152,7 @@ int main(int argc, char **argv)
> if (err)
> ret = err;
> } else {
> - err = do_attach(idx, prog_fd, argv[i]);
> + err = do_attach(idx, prog_fd, map_fd, argv[i]);
> if (err)
> ret = err;
> }
>
|