> On May 30, 2019, at 2:52 AM, Alan Maguire <alan.maguire@xxxxxxxxxx> wrote:
>
> xdping allows us to get latency estimates from XDP. Output looks
> like this:
>
> ./xdping -I eth4 192.168.55.8
> Setting up XDP for eth4, please wait...
> XDP setup disrupts network connectivity, hit Ctrl+C to quit
>
> Normal ping RTT data
> [Ignore final RTT; it is distorted by XDP using the reply]
> PING 192.168.55.8 (192.168.55.8) from 192.168.55.7 eth4: 56(84) bytes of data.
> 64 bytes from 192.168.55.8: icmp_seq=1 ttl=64 time=0.302 ms
> 64 bytes from 192.168.55.8: icmp_seq=2 ttl=64 time=0.208 ms
> 64 bytes from 192.168.55.8: icmp_seq=3 ttl=64 time=0.163 ms
> 64 bytes from 192.168.55.8: icmp_seq=8 ttl=64 time=0.275 ms
>
> 4 packets transmitted, 4 received, 0% packet loss, time 3079ms
> rtt min/avg/max/mdev = 0.163/0.237/0.302/0.054 ms
>
> XDP RTT data:
> 64 bytes from 192.168.55.8: icmp_seq=5 ttl=64 time=0.02808 ms
> 64 bytes from 192.168.55.8: icmp_seq=6 ttl=64 time=0.02804 ms
> 64 bytes from 192.168.55.8: icmp_seq=7 ttl=64 time=0.02815 ms
> 64 bytes from 192.168.55.8: icmp_seq=8 ttl=64 time=0.02805 ms
>
> The xdping program loads the associated xdping_kern.o BPF program
> and attaches it to the specified interface. If run in client
> mode (the default), it will add a map entry keyed by the
> target IP address; this map will store RTT measurements, current
> sequence number etc. Finally in client mode the ping command
> is executed, and the xdping BPF program will use the last ICMP
> reply, reformulate it as an ICMP request with the next sequence
> number and XDP_TX it. After the reply to that request is received
> we can measure RTT and repeat until the desired number of
> measurements is made. This is why the sequence numbers in the
> normal ping are 1, 2, 3 and 8. We XDP_TX a modified version
> of ICMP reply 4 and keep doing this until we get the 4 replies
> we need; hence the networking stack only sees reply 8, where
> we have XDP_PASSed it upstream since we are done.
>
> In server mode (-s), xdping simply takes ICMP requests and replies
> to them in XDP rather than passing the request up to the networking
> stack. No map entry is required.
>
> xdping can be run in native XDP mode (the default, or specified
> via -N) or in skb mode (-S).
>
> A test program test_xdping.sh exercises some of these options.
>
> Note that native XDP does not seem to XDP_TX for veths, hence -N
> is not tested. Looking at the code, it looks like XDP_TX is
> supported so I'm not sure if that's expected. Running xdping in
> native mode for ixgbe as both client and server works fine.
>
> Changes since v2
>
> - updated commit message to explain why seq number of last
> ICMP reply is 8 not 4 (Song Liu)
> - updated types of seq number, raddr and eliminated csum variable
> in xdpclient/xdpserver functions as it was not needed (Song Liu)
> - added XDPING_DEFAULT_COUNT definition and usage specification of
> default/max counts (Song Liu)
>
> Changes since v1
> - moved from RFC to PATCH
> - removed unused variable in ipv4_csum() (Song Liu)
> - refactored ICMP checks into icmp_check() function called by client
> and server programs and reworked client and server programs due
> to lack of shared code (Song Liu)
> - added checks to ensure that SKB and native mode are not requested
> together (Song Liu)
>
> Signed-off-by: Alan Maguire <alan.maguire@xxxxxxxxxx>
> ---
> tools/testing/selftests/bpf/.gitignore | 1 +
> tools/testing/selftests/bpf/Makefile | 5 +-
> tools/testing/selftests/bpf/progs/xdping_kern.c | 184 +++++++++++++++++
> tools/testing/selftests/bpf/test_xdping.sh | 99 ++++++++++
> tools/testing/selftests/bpf/xdping.c | 252 ++++++++++++++++++++++++
> tools/testing/selftests/bpf/xdping.h | 13 ++
> 6 files changed, 552 insertions(+), 2 deletions(-)
> create mode 100644 tools/testing/selftests/bpf/progs/xdping_kern.c
> create mode 100755 tools/testing/selftests/bpf/test_xdping.sh
> create mode 100644 tools/testing/selftests/bpf/xdping.c
> create mode 100644 tools/testing/selftests/bpf/xdping.h
>
> diff --git a/tools/testing/selftests/bpf/.gitignore b/tools/testing/selftests/bpf/.gitignore
> index b2a9902..7470327 100644
> --- a/tools/testing/selftests/bpf/.gitignore
> +++ b/tools/testing/selftests/bpf/.gitignore
> @@ -38,3 +38,4 @@ libbpf.pc
> libbpf.so.*
> test_hashmap
> test_btf_dump
> +xdping
> diff --git a/tools/testing/selftests/bpf/Makefile b/tools/testing/selftests/bpf/Makefile
> index 9b21391..2b426ae 100644
> --- a/tools/testing/selftests/bpf/Makefile
> +++ b/tools/testing/selftests/bpf/Makefile
> @@ -26,7 +26,7 @@ TEST_GEN_PROGS = test_verifier test_tag test_maps test_lru_map test_lpm_map test
> test_sock test_btf test_sockmap test_lirc_mode2_user get_cgroup_id_user \
> test_socket_cookie test_cgroup_storage test_select_reuseport test_section_names \
> test_netcnt test_tcpnotify_user test_sock_fields test_sysctl test_hashmap \
> - test_btf_dump test_cgroup_attach
> + test_btf_dump test_cgroup_attach xdping
>
> BPF_OBJ_FILES = $(patsubst %.c,%.o, $(notdir $(wildcard progs/*.c)))
> TEST_GEN_FILES = $(BPF_OBJ_FILES)
> @@ -57,7 +57,8 @@ TEST_PROGS := test_kmod.sh \
> test_lwt_ip_encap.sh \
> test_tcp_check_syncookie.sh \
> test_tc_tunnel.sh \
> - test_tc_edt.sh
> + test_tc_edt.sh \
> + test_xdping.sh
>
> TEST_PROGS_EXTENDED := with_addr.sh \
> with_tunnels.sh \
> diff --git a/tools/testing/selftests/bpf/progs/xdping_kern.c b/tools/testing/selftests/bpf/progs/xdping_kern.c
> new file mode 100644
> index 0000000..b13c33d
> --- /dev/null
> +++ b/tools/testing/selftests/bpf/progs/xdping_kern.c
> @@ -0,0 +1,184 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/* Copyright (c) 2019, Oracle and/or its affiliates. All rights reserved. */
> +
> +#define KBUILD_MODNAME "foo"
> +#include <stddef.h>
> +#include <string.h>
> +#include <linux/bpf.h>
> +#include <linux/icmp.h>
> +#include <linux/in.h>
> +#include <linux/if_ether.h>
> +#include <linux/if_packet.h>
> +#include <linux/if_vlan.h>
> +#include <linux/ip.h>
> +
> +#include "bpf_helpers.h"
> +#include "bpf_endian.h"
> +
> +#include "xdping.h"
> +
> +struct bpf_map_def SEC("maps") ping_map = {
> + .type = BPF_MAP_TYPE_HASH,
> + .key_size = sizeof(__u32),
> + .value_size = sizeof(struct pinginfo),
> + .max_entries = 256,
> +};
> +
> +static __always_inline void swap_src_dst_mac(void *data)
> +{
> + unsigned short *p = data;
> + unsigned short dst[3];
> +
> + dst[0] = p[0];
> + dst[1] = p[1];
> + dst[2] = p[2];
> + p[0] = p[3];
> + p[1] = p[4];
> + p[2] = p[5];
> + p[3] = dst[0];
> + p[4] = dst[1];
> + p[5] = dst[2];
> +}
> +
> +static __always_inline __u16 csum_fold_helper(__wsum sum)
> +{
> + sum = (sum & 0xffff) + (sum >> 16);
> + return ~((sum & 0xffff) + (sum >> 16));
> +}
> +
> +static __always_inline __u16 ipv4_csum(void *data_start, int data_size)
> +{
> + __wsum sum;
> +
> + sum = bpf_csum_diff(0, 0, data_start, data_size, 0);
> + return csum_fold_helper(sum);
> +}
> +
> +#define ICMP_ECHO_LEN 64
> +
> +static __always_inline int icmp_check(struct xdp_md *ctx, int type)
> +{
> + void *data_end = (void *)(long)ctx->data_end;
> + void *data = (void *)(long)ctx->data;
> + struct ethhdr *eth = data;
> + struct icmphdr *icmph;
> + struct iphdr *iph;
> +
> + if (data + sizeof(*eth) + sizeof(*iph) + ICMP_ECHO_LEN > data_end)
> + return XDP_PASS;
> +
> + if (eth->h_proto != bpf_htons(ETH_P_IP))
> + return XDP_PASS;
> +
> + iph = data + sizeof(*eth);
> +
> + if (iph->protocol != IPPROTO_ICMP)
> + return XDP_PASS;
> +
> + if (bpf_ntohs(iph->tot_len) - sizeof(*iph) != ICMP_ECHO_LEN)
> + return XDP_PASS;
> +
> + icmph = data + sizeof(*eth) + sizeof(*iph);
> +
> + if (icmph->type != type)
> + return XDP_PASS;
> +
> + return XDP_TX;
> +}
> +
> +SEC("xdpclient")
> +int xdping_client(struct xdp_md *ctx)
> +{
> + void *data_end = (void *)(long)ctx->data_end;
> + void *data = (void *)(long)ctx->data;
> + struct pinginfo *pinginfo = NULL;
> + struct ethhdr *eth = data;
> + struct icmphdr *icmph;
> + struct iphdr *iph;
> + __u64 recvtime;
> + __be32 raddr;
> + __u16 seq;
seq should be __be16, right?
> + int ret;
> + __u8 i;
> +
> + ret = icmp_check(ctx, ICMP_ECHOREPLY);
> +
> + if (ret != XDP_TX)
> + return ret;
> +
> + iph = data + sizeof(*eth);
> + icmph = data + sizeof(*eth) + sizeof(*iph);
> + raddr = iph->saddr;
> +
> + /* Record time reply received. */
> + recvtime = bpf_ktime_get_ns();
> + pinginfo = bpf_map_lookup_elem(&ping_map, &raddr);
> + if (!pinginfo || pinginfo->seq != icmph->un.echo.sequence)
> + return XDP_PASS;
> +
> + if (pinginfo->start) {
> +#pragma clang loop unroll(full)
> + for (i = 0; i < XDPING_MAX_COUNT; i++) {
> + if (pinginfo->times[i] == 0)
> + break;
> + }
> + /* verifier is fussy here... */
> + if (i < XDPING_MAX_COUNT) {
> + pinginfo->times[i] = recvtime -
> + pinginfo->start;
> + pinginfo->start = 0;
> + i++;
> + }
> + /* No more space for values? */
> + if (i == pinginfo->count || i == XDPING_MAX_COUNT)
> + return XDP_PASS;
> + }
> +
> + /* Now convert reply back into echo request. */
> + swap_src_dst_mac(data);
> + iph->saddr = iph->daddr;
> + iph->daddr = raddr;
> + icmph->type = ICMP_ECHO;
> + seq = bpf_htons(bpf_ntohs(icmph->un.echo.sequence) + 1);
> + icmph->un.echo.sequence = seq;
> + icmph->checksum = 0;
> + icmph->checksum = ipv4_csum(icmph, ICMP_ECHO_LEN);
> +
> + pinginfo->seq = seq;
> + pinginfo->start = bpf_ktime_get_ns();
> +
> + return XDP_TX;
> +}
> +
> +SEC("xdpserver")
> +int xdping_server(struct xdp_md *ctx)
> +{
> + void *data_end = (void *)(long)ctx->data_end;
> + void *data = (void *)(long)ctx->data;
> + struct ethhdr *eth = data;
> + struct icmphdr *icmph;
> + struct iphdr *iph;
> + __be32 raddr;
> + int ret;
> +
> + ret = icmp_check(ctx, ICMP_ECHO);
> +
> + if (ret != XDP_TX)
> + return ret;
> +
> + iph = data + sizeof(*eth);
> + icmph = data + sizeof(*eth) + sizeof(*iph);
> + raddr = iph->saddr;
> +
> + /* Now convert request into echo reply. */
> + swap_src_dst_mac(data);
> + iph->saddr = iph->daddr;
> + iph->daddr = raddr;
> + icmph->type = ICMP_ECHOREPLY;
> + icmph->checksum = 0;
> + icmph->checksum = ipv4_csum(icmph, ICMP_ECHO_LEN);
> +
> + return XDP_TX;
> +}
> +
> +char _license[] SEC("license") = "GPL";
> diff --git a/tools/testing/selftests/bpf/test_xdping.sh b/tools/testing/selftests/bpf/test_xdping.sh
> new file mode 100755
> index 0000000..c2f0ddb
> --- /dev/null
> +++ b/tools/testing/selftests/bpf/test_xdping.sh
> @@ -0,0 +1,99 @@
> +#!/bin/bash
> +# SPDX-License-Identifier: GPL-2.0
> +
> +# xdping tests
> +# Here we setup and teardown configuration required to run
> +# xdping, exercising its options.
> +#
> +# Setup is similar to test_tunnel tests but without the tunnel.
> +#
> +# Topology:
> +# ---------
> +# root namespace | tc_ns0 namespace
> +# |
> +# ---------- | ----------
> +# | veth1 | --------- | veth0 |
> +# ---------- peer ----------
> +#
> +# Device Configuration
> +# --------------------
> +# Root namespace with BPF
> +# Device names and addresses:
> +# veth1 IP: 10.1.1.200
> +# xdp added to veth1, xdpings originate from here.
> +#
> +# Namespace tc_ns0 with BPF
> +# Device names and addresses:
> +# veth0 IPv4: 10.1.1.100
> +# For some tests xdping run in server mode here.
> +#
> +
> +readonly TARGET_IP="10.1.1.100"
> +readonly TARGET_NS="xdp_ns0"
> +
> +readonly LOCAL_IP="10.1.1.200"
> +
> +setup()
> +{
> + ip netns add $TARGET_NS
> + ip link add veth0 type veth peer name veth1
> + ip link set veth0 netns $TARGET_NS
> + ip netns exec $TARGET_NS ip addr add ${TARGET_IP}/24 dev veth0
> + ip addr add ${LOCAL_IP}/24 dev veth1
> + ip netns exec $TARGET_NS ip link set veth0 up
> + ip link set veth1 up
> +}
> +
> +cleanup()
> +{
> + set +e
> + ip netns delete $TARGET_NS 2>/dev/null
> + ip link del veth1 2>/dev/null
> + if [[ $server_pid -ne 0 ]]; then
> + kill -TERM $server_pid
> + fi
> +}
> +
> +test()
> +{
> + client_args="$1"
> + server_args="$2"
> +
> + echo "Test client args '$client_args'; server args '$server_args'"
> +
> + server_pid=0
> + if [[ -n "$server_args" ]]; then
> + ip netns exec $TARGET_NS ./xdping $server_args &
> + server_pid=$!
> + sleep 10
> + fi
> + ./xdping $client_args $TARGET_IP
> +
> + if [[ $server_pid -ne 0 ]]; then
> + kill -TERM $server_pid
> + server_pid=0
> + fi
> +
> + echo "Test client args '$client_args'; server args '$server_args': PASS"
> +}
> +
> +set -e
> +
> +server_pid=0
> +
> +trap cleanup EXIT
> +
> +setup
> +
> +for server_args in "" "-I veth0 -s -S" ; do
> + # client in skb mode
> + client_args="-I veth1 -S"
> + test "$client_args" "$server_args"
> +
> + # client with count of 10 RTT measurements.
> + client_args="-I veth1 -S -c 10"
> + test "$client_args" "$server_args"
> +done
> +
> +echo "OK. All tests passed"
> +exit 0
> diff --git a/tools/testing/selftests/bpf/xdping.c b/tools/testing/selftests/bpf/xdping.c
> new file mode 100644
> index 0000000..93a5430
> --- /dev/null
> +++ b/tools/testing/selftests/bpf/xdping.c
> @@ -0,0 +1,252 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/* Copyright (c) 2019, Oracle and/or its affiliates. All rights reserved. */
> +
> +#include <linux/bpf.h>
> +#include <linux/if_link.h>
> +#include <arpa/inet.h>
> +#include <assert.h>
> +#include <errno.h>
> +#include <signal.h>
> +#include <stdio.h>
> +#include <stdlib.h>
> +#include <string.h>
> +#include <unistd.h>
> +#include <libgen.h>
> +#include <sys/resource.h>
> +#include <net/if.h>
> +#include <sys/types.h>
> +#include <sys/socket.h>
> +#include <netdb.h>
> +
> +#include "bpf/bpf.h"
> +#include "bpf/libbpf.h"
> +
> +#include "xdping.h"
> +
> +static int ifindex;
> +static __u32 xdp_flags = XDP_FLAGS_UPDATE_IF_NOEXIST;
> +
> +static void cleanup(int sig)
> +{
> + bpf_set_link_xdp_fd(ifindex, -1, xdp_flags);
> + if (sig)
> + exit(1);
> +}
> +
> +static int get_stats(int fd, __u16 count, __u32 raddr)
> +{
> + struct pinginfo pinginfo = { 0 };
> + char inaddrbuf[INET_ADDRSTRLEN];
> + struct in_addr inaddr;
> + __u16 i;
> +
> + inaddr.s_addr = raddr;
> +
> + printf("\nXDP RTT data:\n");
> +
> + if (bpf_map_lookup_elem(fd, &raddr, &pinginfo)) {
> + perror("bpf_map_lookup elem: ");
> + return 1;
> + }
> +
> + for (i = 0; i < count; i++) {
> + if (pinginfo.times[i] == 0)
> + break;
> +
> + printf("64 bytes from %s: icmp_seq=%d ttl=64 time=%#.5f ms\n",
> + inet_ntop(AF_INET, &inaddr, inaddrbuf,
> + sizeof(inaddrbuf)),
> + count + i + 1,
> + (double)pinginfo.times[i]/1000000);
> + }
> +
> + if (i < count) {
> + fprintf(stderr, "Expected %d samples, got %d.\n", count, i);
> + return 1;
> + }
> +
> + bpf_map_delete_elem(fd, &raddr);
> +
> + return 0;
> +}
> +
> +static void show_usage(const char *prog)
> +{
> + fprintf(stderr,
> + "usage: %s [OPTS] -I interface destination\n\n"
> + "OPTS:\n"
> + " -c count Stop after sending count requests\n"
> + " (default %d, max %d)\n"
> + " -I interface interface name\n"
> + " -N Run in driver mode\n"
> + " -s Server mode\n"
> + " -S Run in skb mode\n",
> + prog, XDPING_DEFAULT_COUNT, XDPING_MAX_COUNT);
> +}
> +
> +int main(int argc, char **argv)
> +{
> + __u32 mode_flags = XDP_FLAGS_DRV_MODE | XDP_FLAGS_SKB_MODE;
> + struct addrinfo *a, hints = { .ai_family = AF_INET };
> + struct rlimit r = {RLIM_INFINITY, RLIM_INFINITY};
> + __u16 count = XDPING_DEFAULT_COUNT;
> + struct pinginfo pinginfo = { 0 };
> + const char *optstr = "c:I:NsS";
> + struct bpf_program *main_prog;
> + struct sockaddr_in rin;
> + struct bpf_object *obj;
> + int prog_fd, map_fd;
> + struct bpf_map *map;
> + char *ifname = NULL;
> + char filename[256];
> + __u32 raddr = 0;
> + int server = 0;
> + char cmd[256];
> + int opt, ret;
> +
> + while ((opt = getopt(argc, argv, optstr)) != -1) {
> + switch (opt) {
> + case 'c':
> + count = atoi(optarg);
> + if (count < 1 || count > XDPING_MAX_COUNT) {
> + fprintf(stderr,
> + "min count is 1, max count is %d\n",
> + XDPING_MAX_COUNT);
> + return 1;
> + }
> + break;
> + case 'I':
> + ifname = optarg;
> + ifindex = if_nametoindex(ifname);
> + if (!ifindex) {
> + fprintf(stderr, "Could not get interface %s\n",
> + ifname);
> + return 1;
> + }
> + break;
> + case 'N':
> + xdp_flags |= XDP_FLAGS_DRV_MODE;
> + break;
> + case 's':
> + /* use server program */
> + server = 1;
> + break;
> + case 'S':
> + xdp_flags |= XDP_FLAGS_SKB_MODE;
> + break;
> + default:
> + show_usage(basename(argv[0]));
> + return 1;
> + }
> + }
> +
> + if (!ifname) {
> + show_usage(basename(argv[0]));
> + return 1;
> + }
> + if (!server && optind == argc) {
> + show_usage(basename(argv[0]));
> + return 1;
> + }
> +
> + if ((xdp_flags & mode_flags) == mode_flags) {
> + fprintf(stderr, "-N or -S can be specified, not both.\n");
> + show_usage(basename(argv[0]));
> + return 1;
> + }
> +
> + if (!server) {
> + /* Only supports IPv4; see hints initiailization above. */
> + if (getaddrinfo(argv[optind], NULL, &hints, &a) || !a) {
> + fprintf(stderr, "Could not resolve %s\n", argv[optind]);
> + return 1;
> + }
> + memcpy(&rin, a->ai_addr, sizeof(rin));
> + raddr = rin.sin_addr.s_addr;
> + freeaddrinfo(a);
> + }
> +
> + if (setrlimit(RLIMIT_MEMLOCK, &r)) {
> + perror("setrlimit(RLIMIT_MEMLOCK)");
> + return 1;
> + }
> +
> + snprintf(filename, sizeof(filename), "%s_kern.o", argv[0]);
> +
> + if (bpf_prog_load(filename, BPF_PROG_TYPE_XDP, &obj, &prog_fd)) {
> + fprintf(stderr, "load of %s failed\n", filename);
> + return 1;
> + }
> +
> + main_prog = bpf_object__find_program_by_title(obj,
> + server ? "xdpserver" :
> + "xdpclient");
> + if (main_prog)
> + prog_fd = bpf_program__fd(main_prog);
> + if (!main_prog || !prog_fd) {
This should be
if (!main_prog || prog_fd < 0) {
> + fprintf(stderr, "could not find xdping program");
> + return 1;
> + }
> +
> + map = bpf_map__next(NULL, obj);
> + if (map)
> + map_fd = bpf_map__fd(map);
> + if (!main_prog || prog_fd < 0) {
This should be (map, not prog)
if (!map || map_fd < 0) {
> + fprintf(stderr, "Could not find ping map");
> + return 1;
> + }
> +
> + signal(SIGINT, cleanup);
> + signal(SIGTERM, cleanup);
> +
> + printf("Setting up XDP for %s, please wait...\n", ifname);
> +
> + printf("XDP setup disrupts network connectivity, hit Ctrl+C to quit\n");
> +
> + if (bpf_set_link_xdp_fd(ifindex, prog_fd, xdp_flags) < 0) {
> + fprintf(stderr, "Link set xdp fd failed for %s\n", ifname);
> + return 1;
> + }
> +
> + if (server) {
> + printf("Running server on %s; press Ctrl+C to exit...\n",
> + ifname);
> + do { } while (1);
> + }
> +
> + /* Start xdping-ing from last regular ping reply, e.g. for a count
> + * of 10 ICMP requests, we start xdping-ing using reply with seq number
> + * 10. The reason the last "real" ping RTT is much higher is that
> + * the ping program sees the ICMP reply associated with the last
> + * XDP-generated packet, so ping doesn't get a reply until XDP is done.
> + */
> + pinginfo.seq = htons(count);
> + pinginfo.count = count;
> +
> + if (bpf_map_update_elem(map_fd, &raddr, &pinginfo, BPF_ANY)) {
> + fprintf(stderr, "could not communicate with BPF map: %s\n",
> + strerror(errno));
> + cleanup(1);
> + }
> +
> + /* We need to wait for XDP setup to complete. */
> + sleep(10);
> +
> + snprintf(cmd, sizeof(cmd), "ping -c %d -I %s %s",
> + count, ifname, argv[optind]);
> +
> + printf("\nNormal ping RTT data\n");
> + printf("[Ignore final RTT; it is distorted by XDP using the reply]\n");
> +
> + ret = system(cmd);
> +
> + if (!ret)
> + ret = get_stats(map_fd, count, raddr);
> +
> + cleanup(0);
> +
> + if (ret)
> + return 1;
> +
> + return 0;
> +}
> diff --git a/tools/testing/selftests/bpf/xdping.h b/tools/testing/selftests/bpf/xdping.h
> new file mode 100644
> index 0000000..b1c3666
> --- /dev/null
> +++ b/tools/testing/selftests/bpf/xdping.h
> @@ -0,0 +1,13 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +/* Copyright (c) 2019, Oracle and/or its affiliates. All rights reserved. */
> +
> +#define XDPING_MAX_COUNT 10
> +#define XDPING_DEFAULT_COUNT 4
> +
> +struct pinginfo {
> + __u64 start;
> + __u16 seq;
Also:
__be16 seq;
> + __u16 count;
> + __u32 pad;
> + __u64 times[XDPING_MAX_COUNT];
> +};
> --
> 1.8.3.1
>
|