Re: [PATCH v9 2/2] arm64: boot: Support Flat Image Tree

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hello Simon,

On 02.12.23 04:54, Simon Glass wrote:
> Add a script which produces a Flat Image Tree (FIT), a single file
> containing the built kernel and associated devicetree files.
> Compression defaults to gzip which gives a good balance of size and
> performance.
> 
> The files compress from about 86MB to 24MB using this approach.
> 
> The FIT can be used by bootloaders which support it, such as U-Boot
> and Linuxboot. It permits automatic selection of the correct
> devicetree, matching the compatible string of the running board with
> the closest compatible string in the FIT. There is no need for
> filenames or other workarounds.
> 
> Add a 'make image.fit' build target for arm64, as well. Use
> FIT_COMPRESSION to select a different algorithm.
> 
> The FIT can be examined using 'dumpimage -l'.
> 
> This features requires pylibfdt (use 'pip install libfdt'). It also
> requires compression utilities for the algorithm being used. Supported
> compression options are the same as the Image.xxx files. For now there
> is no way to change the compression other than by editing the rule for
> $(obj)/image.fit
> 
> While FIT supports a ramdisk / initrd, no attempt is made to support
> this here, since it must be built separately from the Linux build.
> 
> Signed-off-by: Simon Glass <sjg@xxxxxxxxxxxx>

kernel_noload support is now in barebox next branch and I tested this
series against it:

Tested-by: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx> # barebox

> +"""Build a FIT containing a lot of devicetree files
> +
> +Usage:
> +    make_fit.py -A arm64 -n 'Linux-6.6' -O linux
> +        -f arch/arm64/boot/image.fit -k /tmp/kern/arch/arm64/boot/image.itk
> +        /tmp/kern/arch/arm64/boot/dts/ -E -c gzip
> +
> +Creates a FIT containing the supplied kernel and a directory containing the
> +devicetree files.
> +
> +Use -E to generate an external FIT (where the data is placed after the
> +FIT data structure). This allows parsing of the data without loading
> +the entire FIT.
> +
> +Use -c to compress the data, using bzip2, gzip, lz4, lzma, lzo and
> +zstd algorithms.
> +
> +The resulting FIT can be booted by bootloaders which support FIT, such
> +as U-Boot, Linuxboot, Tianocore, etc.

Feel free to add barebox to the list. Did you check whether Linuxboot and
Tianocore support kernel_noload?

> +        fsw.property_u32('load', 0)
> +        fsw.property_u32('entry', 0)

I still think load and entry dummy values are confusing and should be dropped.

> +    with fsw.add_node(f'fdt-{seq}'):
> +        # Get the compatible / model information
> +        with open(fname, 'rb') as inf:
> +            data = inf.read()
> +        fdt = libfdt.FdtRo(data)
> +        model = fdt.getprop(0, 'model').as_str()
> +        compat = fdt.getprop(0, 'compatible')
> +
> +        fsw.property_string('description', model)
> +        fsw.property_string('type', 'flat_dt')
> +        fsw.property_string('arch', arch)
> +        fsw.property_string('compression', compress)
> +        fsw.property('compatible', bytes(compat))
> +
> +        with open(fname, 'rb') as inf:
> +            compressed = compress_data(inf, compress)
> +        fsw.property('data', compressed)
> +    return model, compat

After Doug's elaboration, extracting multiple compatibles is fine by me.

Cheers,
Ahmad

-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |





[Index of Archives]     [Linux Samsung SoC]     [Linux Rockchip SoC]     [Linux Actions SoC]     [Linux for Synopsys ARC Processors]     [Linux NFS]     [Linux NILFS]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]


  Powered by Linux