From: Ping-Ke Shih <pkshih@xxxxxxxxxxx>
Republic ToGolaise released Decision N 226/ARCEP/DG/22.
2400-2483.5 MHz
- EIRP 100 mW and 10 mW/MHz density
5150-5350 MHz
- EIRP 200 mW
- If TPC is not used, must be reduced by 3 dB
5470-5850 MHz
- EIRP 1W
- If TPC is not used, must be reduced by 3 dB
5925-6425 MHz
- LPI
* EIRP 23 dBm (200 mW)
* EIRP density 10 dBm/MHz
(Reference [1] suggest this as -10 dBm/MHz, but this would be an error,
becase PSD of LPI should not be lower than VLP.)
* Use limited to indoor
- VLP
* EIRP 14 dBm (25 mW)
* EIRP density -1 dBm/MHz
57-66 GHz
- EIRP 40 dBm and 13 dBm/MHz density
[1] https://arcep.tg/wp-content/uploads/2022/12/Decision-226-22-Determinant-les-categories-et-conditions-techniques-dexploitation-des-appareils-de-faible-puissance-et-de-faible-portee.pdf
Signed-off-by: Ping-Ke Shih <pkshih@xxxxxxxxxxx>
---
v2:
- in commit message, describe typo that 5925-6425 LPI should be EIRP
density 10 dBm/MHz. Otherwise, PSD for LPI is lower than VLP.
- add DFS for all bands
- not split 5150 - 5350 band, and set bandwidth to 80 MHz
- set bandwidth 160 MHz for 5470 - 5850
---
db.txt | 11 +++++++----
1 file changed, 7 insertions(+), 4 deletions(-)
diff --git a/db.txt b/db.txt
index 31a051f242e5..b5e40e038d77 100644
--- a/db.txt
+++ b/db.txt
@@ -1763,11 +1763,14 @@ country TD: DFS-ETSI
(5250 - 5330 @ 80), (20), DFS, AUTO-BW
(5490 - 5710 @ 160), (27), DFS
+# Source:
+# https://arcep.tg/wp-content/uploads/2022/12/Decision-226-22-Determinant-les-categories-et-conditions-techniques-dexploitation-des-appareils-de-faible-puissance-et-de-faible-portee.pdf
country TG: DFS-ETSI
- (2402 - 2482 @ 40), (20)
- (5170 - 5250 @ 40), (20)
- (5250 - 5330 @ 40), (20), DFS
- (5490 - 5710 @ 40), (27), DFS
+ (2400 - 2483.5 @ 40), (100 mW), DFS
+ (5150 - 5350 @ 80), (20), DFS
+ (5470 - 5850 @ 160), (27), DFS
+ (5925 - 6425 @ 320), (23), DFS, NO-OUTDOOR
+ (57000 - 66000 @2160), (40), DFS
# Source:
# https://ratchakitcha.soc.go.th/documents/140D100S0000000004000.pdf
--
2.25.1
