You dropped Peter and the linux-wireless list from your reply, adding them back. On Thu, May 16, 2019 at 12:10:16AM +0900, suchan wrote: > > 2019-05-15 10:03PM at Seth Forshee wrote: > > > > Is there any mention of transmit power control in the document? The fact > > that some of the old limits are exactly half of they values you've given > > makes me wonder if they weren't set lower for TPC, especially for > > 5250-5350 MHz where TPC is common. > > > > Since you're changing these rules, I'd also like to see the frequency > > ranges changed to match the documented ranges, i.e.: > > > > 2400 - 2483.5 > > 5150 - 5250 > > 5250 - 5350 > > 5470 - 5710 > > 5735 - 5850 > > > > I left the gap in the 5470-5850 MHz range since I can't tell exactly > > where the DFS requirement ends. Usually it seems to be 5725 MHz, but > > that is not universal. If you can determine where the break is those > > ranges could also be expanded. > > > > Thanks, > > Seth > > > > _______________________________________________ > > wireless-regdb mailing list > > wireless-regdb@xxxxxxxxxxxxxxxxxxx > > http://lists.infradead.org/mailman/listinfo/wireless-regdb > > from same document, just under the table for wifi range itself 5250∼5350 > MHz and 5470∼5725 MHz need TPC and DFS > > TPC rule is if power exceeds 25mW/MHz (this includes antenna gain), it > has do be able to reduce it under 12.5mW/Mhz. > > DFS rule itself (DFS-JP) looks right. Thanks! Based on that I think this is probably what we need: (2400 - 2483.5 @ 40), (23) (5150 - 5250 @ 80), (23), AUTO-BW (5250 - 5350 @ 80), (20), DFS, AUTO-BW (5470 - 5725 @ 160), (20), DFS (5725 - 5835 @ 80), (23) Peter, if that looks good to you please send a v3 patch. Thanks, Seth _______________________________________________ wireless-regdb mailing list wireless-regdb@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/wireless-regdb
